Category Archives: Computers

Posts that have something to do with our computers and networking technology.

2015/02/07-11 (S-W) In and Around Q

2015/02/07 (S) Bouse, AZ

We got up around 8 AM, got cleaned up, and had coffee and granola.  Linda then cut my hair, which seems to be a once every 4 to 6 weeks thing when we are traveling.  Butch and Fonda went to Yuma to meet up with Bell, Bell’s daughter, and Bell’s three grand-daughters.  Bell’s daughter was in Yuma with her Roller Derby team and the family came along.  We wanted to get out and do some more sight-seeing and decided to drive to Bouse, Arizona.

Cholla "teddy bear" cacti at Quinn's Pass on the road to Bouse, AZ.

Cholla “teddy bear” cacti at Quinn’s Pass on the road to Bouse, AZ.

Bouse is a small town located in the next valley to the east of Quartzsite, which sits in the La Paz valley.  It is on AZ-72 at the eastern end of Plomosa Road.  The western end of Plomosa Road is at AZ-95 seven miles north of the city limit of Quartzsite.  The first three miles of Plomosa Road heading east from AZ-95 runs through the BLM Plomosa Road STVA.  The road is paved its entire length and provided a fun and scenic drive out to Bouse and back.  We stopped at Quinn Pass to read the historical marker and ended up going on a short hike.  We have wanted to do this little trip ever since friends told us about it, but today provided an added incentive to finally go; the Parker 425.

The Parker 425 is an annual off-road race in the desert east of Parker, south of the Buckskin Mountains, and north of Bouse.  The course is a little over 140 miles in length and the race consists of three loops for a total of 425 miles.  It begins and ends at the Bluewater Resort and Casino in Parker.  Last year’s winner completed the race in just over seven hours.  That’s an average speed of 60 MPH, and there are plenty of curves and bumpy areas where it is not possible to go that fast, so the vehicles are really moving every place they can.

When we got to AZ-72 we crossed the highway, drove three short blocks, and made a left on Swansea.  I could see from the GPS that it was a paved road that continued in a northeasterly direction.  I had looked at a map yesterday and had a general sense that one of the spectator areas was out that way.  We did not have to drive very far before we saw Jeeps and ATVs parked on top of a big hill all facing the same direction.  We drove past the turnoff for that area and just around the hill was a large parking area full of cars and RVs.  The dirt road was closed, the Fire Department was set up there, and there was a checkpoint for the race.  I found a place to park and we got out to check out the action.

We stayed long enough to see a dozen different vehicles pass through the checkpoint and I shot photos from several different vantage points.  There are different classes of vehicles, but the ones we saw were of two types: highly modified small pickup trucks, and custom built off-road racers known as “grasshoppers” because of their long shape and the suspensions allow them to “bounce” over bumps in the road.

View looking NW from the Quinn's Pass area between Quartzsite and Bouse, AZ.

View looking NW from the Quinn’s Pass area between Quartzsite and Bouse, AZ.

The air temperature was pleasant but the sun was very hot so we drove the short distance back to Bouse, stopped at AZ-72, and quickly scoped out the town.  We spotted the Coachman Restaurant just northwest of the intersection and drove over there to have lunch.  We each had a garden salad and iced tea, and I had French fries.  We can pretty much count on lettuce and potatoes in any restaurant we visit.

Bouse was founded in 1908 as a mining camp but as a waypoint between Phoenix and Parker it now survives on tourism, agriculture, and retirees.  Measuring 10.1 square miles at 947 feet ASL with 996 residents (2010 census) the area enjoys sunny skies year-round.  We saw RVs of all types throughout town and in the dessert along Plomosa Road which is all BLM land.  There were also quite a few RVs in the Bouse Community Park.

We drove back to Quartzsite the way we came, a distance of 30 miles, because the only other ways back were via Parker (64 miles) and Phoenix (at least 250 miles).  Linda wanted to walk through the Tyson Wells market area one more time as this is the last weekend for the Craft Show.  We bought a cute hand puppet that we think grand-daughter Madeline will find very interesting.  We drove over to Barry’s Breads to get a loaf of his Barry’s Basic Bread but he was not open.  In fact, it looked like he was done for the season.  Activity really has slowed down here and he is presumably getting ready to move to his next venue.

We stopped at the Road Runner Market and bought a loaf of French bread and some red grapes.  We then drove to the Quartzsite Cemetery to take photographs of Hadji Ali’s (Hi Jolly’s) gravesite, which is marked by a small pyramid with a silhouette of a camel on top.  As long as we were there we wandered around the rest of the cemetery, which was an interesting and well-kept place.

Once we were back at the coach Linda sat outside and read while I transferred photo files from my camera to my computer and backed them up to our NAS.  I then continued selecting and processing images from yesterday’s outing to KOFA NWR Palm Canyon.  I was starting to work on the images from today when Linda cane in and started making dinner.

She decided to make “Mustard Greens and Beans” using Great Northern beans.  In addition to the usual onion and garlic, it had vinegar, a little sugar, and honey mustard.  It was very tasty and we agreed it was a keeper.  She served sautéed green beans on the side, cut up some of the French bread, and poured a couple of glasses of Franzia Refreshing White wine.  Sliced fresh strawberries and cookies for desert completed the meal.

Butch and Fonda got back from Yuma while Linda was cooking.  I gave Butch a call after dinner to discuss our TireTraker systems.  He needs to charge their monitor this evening and I asked him to check on the behavior of the LEDS on the 12/24VDC plug.

As we do most evenings, Linda read and played online word games while I worked on this post for a while and then resumed editing photos on my computer.  I checked e-mail again and had several regarding the upcoming Freethinkers gathering at the Liar Peg Leg Smith Monument boondocking area near Borrego Springs, California.  One of them posited the question of how often Friday the 13th occurs?  I did a quick online search and the answer appeared to be 1 to 3 times per year and every 12/7 or 1.714 times per year, on average.  That is 171.4 times per century or 1,714 times per millennium.  I posted that back to the e-mail reflector and went to bed.

Rocks and flora at Quinn's Pass, AZ.

Rocks and flora at Quinn’s Pass, AZ.

2015/02/08 (N) Another Meetup

I was up at 7:30 AM this morning and got the coffee made right away.  Linda did not sleep well last night but got up as soon as she smelled the coffee.  Breakfast was toast and preserves.  I was planning on putting in a long day at my computer and Linda was planning on doing laundry and some work for the bakery but our plans changed before we got started.  When I checked my e-mail I had one from Lou and Donna Rice of our FMCA Freethinkers Chapter indicating that they were at Mile Marker 2 on Plomosa Road.  We drove right past them twice yesterday on our visit to Bouse but had no idea they were there.

Plomosa Road is about seven miles north of Quartzsite on AZ-95.  We left at 10 AM and were parked next to their Jeep before 10:15.  We sat and talked for four hours before returning to our coach.  As soon as we got back I took our TireTraker monitor and charger over to Butch’s coach.  We tried our charger on his monitor and it worked fine.  We then tried his charger on our monitor and it did not work.  Between our four devices it was clearly our monitor that was defective.  I will have to call Darryl Lawrence tomorrow and see what we can figure out.

We each had a pear, some red grapes, and something to drink.  Linda gathered up laundry and I got to work editing consolidated blog posts.  In between loads she sat outside and read.

Fonda had two Poblano peppers she got at the Farmers Market on Wednesday and gave them to Linda.  Linda found a recipe for stuffed grilled poblanos.  The stuffing was white rice, scallions, black beans, tomatoes, vegan sour cream and cheddar cheese, and cumin.  It resembled Mexican rice but with a creamy/cheesy dimension.  She cooked the stuffed peppers on Butch and Fonda’s little grill and cooked the extra stuffing on our cooktop.  She served the dish with Clementine orange wedges and a glass of Franzia Refreshing White wine to make an outstanding meal.

After dinner we sat outside Butch and Fonda’s bus enjoying the cool desert night air and watching the lights of airplanes flying overhead.  It eventually cooled off enough that we returned to our coach where I continued to work on blog posts and Linda worked on the bakery accounting.  She eventually went off to bed and I uploaded survey items to the FMCA Education Committee folder in our Dropbox and sent an e-nail to the committee.  We have a committee work session tomorrow at 4 PM EST (2 PM MST).

Vehicles positioned east of Bouse, AZ to watch the Parker 435 off-road race.

Vehicles positioned east of Bouse, AZ to watch the Parker 435 off-road race.

2015/02/09 (M) A Bright Idea

Butch called around 8:20 AM to let me know that our light bulb order was at the Post Office awaiting pickup.  He and Fonda were headed to the Quartzsite Gem and Mineral Club for a day-long class on faceting, so he gave me the parcel slip so I could go pick up the package.

While we were eating breakfast it suddenly occurred to me that we should visit Frank Lloyd Wright’s Taliesin West while we are camped near Tucson next month.  Linda went to the website and discovered that it is in Scottsdale which is a northern Suburb of Phoenix and is closer to Quartzsite than it us to Tucson.  We selected a couple of possible dates and she went online to get tickets.  The “Behind the Scenes” tours are only done on Monday, Thursday, and Saturday.  She tried to get tickets for Monday February 16 but they only had one left.  She called but they would not sell us two tickets.  We waited way too long to think of this and painted ourselves into a corner so it may not happen on this trip to the southwest.

I drove to the Quartzsite Post Office after breakfast and retrieved the package, only my second trip to the Post Office to transact business since we arrived in Q.  The first trip was to sign up for the P. O. Box.  Linda usually takes care of the mail while she is out walking and Butch usually checks the P. O. Box, which is at a different location that is not quite as convenient a walk from our camp as the main building.  We have not used the P. O. Box very much, but it has been invaluable when we have.

I worked most of the day on some of my blog posts for December 2014.  I took a break around 12:30 for a bite of lunch and then called Daryl Lawrence and left a message regarding our TireTraker TT-400C monitor which appears to not be recharging.

The Parker 425 checkpoint east of Bouse, AZ.  This race is a BIG deal with fire, EMS, and helicopter coverage.

The Parker 425 checkpoint east of Bouse, AZ. This race is a BIG deal with fire, EMS, and helicopter coverage.

Gaye Young called around 1:30 PM to make sure I was going to participate in the FMCA Education Committee work session at 2 PM.  (Gaye is the chairperson of the committee.)  There were only two items on the agenda and I had to give the status report on both of them.  Our work sessions and meetings are conducted by telephone conference.  They usually last an hour and today was not an exception.  If committee members provide me with additional input this week regarding an education survey we are developing I will have some work to do the last two weeks of the month in addition to working on articles for Bus Conversion Magazine, completing some minor repairs on the bus, finishing the cleaning/waxing of the exterior of the bus, and cleaning/waxing the car.

I managed to upload consolidated blog posts, including some photographs, for December 5 – 8, 9 – 12, and 13 – 16, 2014.  I did not take very many photos while we were traveling but once we got settled in Q I got the camera out and started using it.

I got a call back from Jeff at TireTraker support.  I explained what the monitor was (not) doing and he agreed to mail me a new one along with a new charger.  We will return the defective one to Daryl at Escapade next month.

Linda cooked up a couple of Tofurkey brand vegan Italian sausages with sweet onions and sweet red bell peppers and served some broccoli as a side dish.  After dinner I removed my bulbs from the Bulbtown shipment and checked the quantities and prices against my spreadsheet.  I then took the remaining bulbs over to Butch.  He had ordered 10 #4003 bulbs to use in his bay fixtures and realized when he saw them that he should have ordered #4004s.  Both are 24VDC bulbs but the #4003s have a single contact base whereas #4004s have a double contact base.  I think my bay light fixtures may take #4003s.  I will check tomorrow and if so I will buy them instead of Butch.

We sat outside with the lights off enjoying a glass of wine while watching the long lingering sunset backlight the mountains to our west.  As the sunset faded we looked at the stars and watched aircraft lights moving east and west high over the desert.  It still cools off here after the sun sets but not as quickly, nor as dramatically, as it did just  a week ago.

I combined the blog posts for December 17 – 20, 2014.  I had selected and processed photos for this post earlier so it was ready to upload at 11 PM but I did not want to go through the process at that late hour.  I dealt with a couple of e-mails and then went to bed.  A short time later Jasper threw up a large quantity of food so I had to get up and deal with that.  It looked like it had some hair mixed in with it, but I don’t know if that was the root cause.

2015/02/10 (T) Deionized

We were planning on heading to the Peg Leg Monument boondocking area on Thursday, spending the night in Indio, California and visiting Joshua Tree National Park (JTNP) on Friday before driving home Friday evening.  Ken Harrison from the FMCA Freethinkers indicated that he and Linda would not make it to Peg Leg until Friday.  That prompted us to consider flipping our plans, doing JTNP on Thursday and Peg leg on Friday.  Either way we will stay in Indio as we already have reservations at a motel.

The Polaris RZR ("razer") was one of the most popular 4-wheel ATVs in and around Q.

The Polaris RZR (“razer”) was one of the most popular 4-wheel ATVs in and around Q.

We had another stay-at-home day relaxing while getting things done.  Linda was going to drive to Blythe for groceries, but decided to go on Sunday as we will be away from camp all of Thursday and Friday and much of Saturday.  She is going to see if the Farmers Market is still operating tomorrow morning.  If not she will stop by the Road Runner Market.

As has been our pattern recently Linda went for a long walk (5 miles) while I continued to work on blog posts.  We had a light lunch when she returned.  I then called Teeko’s Coffee and Tea in Howell, Michigan and ordered six pounds of roasted coffee beans to be shipped to us here in Q.  We are approaching the midpoint of our snowbird season and are almost out of the five pounds of coffee we started with.  Jeff is going to roast two pounds each of Ethiopian Yirgacheffe half-caff, Sweet Seattle Dreams half-calf, and Cafe Europe Blend half-caff.  He will let it out-gas for a couple of days and then vacuum seal it in one-pound portions and mail it to us in a USPS flat rate box that will go to our P. O. Box in Q.  That should be enough to get us home even if we do not get there until late April.

Butch is always looking out for us and trying to help us spend our retirement dollars so he sent me a link to a portable two-tank water de-ionizing system that is available from RVupgrades.com.  The system is intended for washing/finishing cars and RVs as de-ionized water has had all of the dissolved minerals removed and does not leave spots on surfaces when it dries.  It is not, however, considered suitable for drinking.  The two tanks are plumbed in series and use special resin beds that have to be replaced when exhausted rather than recharged.  The first tank removes cations and the second removes anions, leaving the water completely deionized.  The cations are the positively charged ones typically “removed” by water “softeners”, such as calcium, iron, and magnesium, through ion exchange with sodium.  The anions are the negatively charged ones that water softeners typically do not remove, including fluoride and sodium.  The dual tank system is about 33% more expensive than a single tank portable water softener, but given the time, expense, and frustration I am experiencing trying to clean and wax our motorcoach I am seriously considering ordering one tomorrow.

I uploaded two consolidated blog posts yesterday and another one this afternoon.  I consolidated the posts for December 21 – 26, 2014, selected and processed the photos, and then took a break to sit outside and just enjoy the weather.  No book, no iPad, no computer; just ahhhh.  It was 78 degrees F with 19% relative humidity, a steady breeze from the northwest, and a hot sun shining through absolutely clear blue skies.  Linda and I agreed that it was the most perfect weather day we have had so far this winter.

Linda had some seitan ‘mock’ beef in the freezer that she heated in a saucepan and served with basmati rice accented with soy sauce.  Very simple but very tasty.  After dinner I uploaded the December 21 – 26 consolidated blog post along with 12 photos, entered all of the tags, and published it.

I got an e-mail yesterday from Cherie Ve Ard of Technomadia asking if we would be interested in previewing/testing another new website.  I said ‘yes’ and she responded with the URL for the development site.  When I was done with our website I went to the new one and created an account.  I got an activation e-mail, clicked the link, and was able to login.  I spent an hour looking around the site and captured my impressions and suggestions in an e-mail back to the development team.  I took a few minutes to investigate portable water deionizers but by then it was too late to get involved in any serious research so I went to bed.

2015/02/11 (W) Update This!

Hi Jolly's (Hadji Ali's) gravesite in the Quartzsite Cemetary; allegedly the most visited place in Q.

Hi Jolly’s (Hadji Ali’s) gravesite in the Quartzsite Cemetary; allegedly the most visited place in Q.

Linda’s cell phone rang just before 8 AM.  It was Barb.  She and Jim were up, dressed, and had the golf cart out and ready to go to the Farmers Market.  When we mentioned it yesterday Barb said she wanted to go and Linda indicated that it was open from 8 AM to noon.  Somehow that got translated into leaving at 8 AM to go to the market.  Linda, being a good sport, got up, got dressed and walked over about 8:15 and said she was ready to go.  No breakfast, no coffee, just the “git er done” spirit of the old west.  I stayed behind and got the coffee ready to brew when she returned.  I then got to work on computer stuff in the true “git er done” spirit of the new/virtual west.

They returned from the Farmers Market around 9:30 AM.  Linda bought another Romanesco brocciflower, some Brussels sprouts, grapefruit, and oranges.  To our delight Barry’s Breads was also there and had a few loaves of Barry’s Basic Bread.  He told Linda he will be around, at least at the Wednesday Farmers Market, through the end of this month.

As much as I would like to have de-ionized water available for rinsing the coach as I wash it, I decided not to speed hundreds of dollars without first doing deeper research into the available technologies and their life cycle costs.  I had enough other stuff to do today that I did not want to make time to dig into this new topic.

Linda saw a photographers vest at the Salvation Army resale store the other day but did not buy it as it was $15, pricey for the SA, and she wasn’t sure it would fit me.  We drove over to the store to see if it was still there.  It was, and it was too small for me.  It also had a defective zipper.  For a moment I thought we were going to have to buy it so I could take it home and cut it off.  I managed instead to pull it off over my head like a t-shirt and Linda was then able to get the zipper undone and put it back on the rack.  This was my first time in the store so while we were there I found two pairs of shorts for $2 each, a third pair for $0.50, and a lightweight, lined, waist-length London Fog jacket for $0.25.  Linda found a white hand-held mixer with two beaters for $4.  Deal.

When we got back Linda called the Prince of Tucson RV Park and made a reservation for the evening of Thursday, March 5th.  Lou and Val Petkus will already be there and this will allow us to caravan into the SKP Escapade at the Pima County Fairgrounds first thing Friday morning.   By coming in together we will be able to park together which will make our staff photography work more convenient.

My computer indicated that it had a large number of updates to install; 34, to be exact.  It was a 334 MB download so I turned on our Verizon Mi-Fi and switched my computer over to it.  The Mi-Fi is much faster than the Wi-Fi and I find that with large downloads the faster I get them done the more likely they are to complete successfully.  When those were done downloading and installing I had to restart my computer to finish the installation.  I also had an updated driver available for the NVIDIA GeForce graphics processor, so I downloaded and installed that.

 

I figured that if I had updates for my computer Linda would have them for hers.  I switched her computer over to our Mi-Fi and checked for updates.  She had 20 recommended and 4 optional.  I selected all 24 and the download was 980 MB.  That’s a lot of updates so I started it and let it run.  As always, finishing the installation required the computer to be rebooted.  When it restarted her computer the screen was once again functioning normally.  Go figure.  She also had an Adobe Creative Cloud update so I started that.  It failed at the 29% point so closed it and restarted it.  The second time it ran to completion.

Linda needed to work at her computer so we both sat at the dinette table and did our respective computer things.  She brought our financial records up-to-date in Quicken and I compiled and then uploaded a consolidated blog post for the last six days of December 2014.  I had e-mails going back and forth with some of our fellow FMCA Freethinkers regarding the Peg Leg gathering and ended up joining the Freedom From Religion Foundation.  I’ve meant to do that for a while and the electrons finally aligned just right this afternoon.

Hi Jolly's pyramid gravesite marker is a State Historical Site.

Hi Jolly’s pyramid gravesite marker is a State Historical Site.

Somewhere during the course of the afternoon we had sandwiches for lunch and snacked on dried fruits and nuts.  Kathi Slater called to check on Linda’s travel arrangements, after which I made popcorn.  Linda borrowed a small cooler from Butch and Fonda for our 2-day trip to California and back.  Fonda came over to go through the chores involved in caring for the cats while we are away and Linda gave her a set of keys to the bus.

I had seen a quick notification from the RV Internet Resource Center (Mobile Internet Aficionados membership website) that WiFiRanger had finally released their new firmware upgrade for the WiFiRanger Mobile.  Using my iPad as the control panel I switched our WFR-MT from the Wi-Fi/DSL connection to our Verizon Mi-Fi.  Again, I wanted to make sure this upgrade got downloaded as quickly as possible through the most reliable connection we have.  The download was reasonably quick but the installation took quite a while.  My iPad eventually lost contact with the WFR-MT and I just left it to finish and went over to visit with Butch and Fonda and Linda.  We came back to our coach when their dinner was ready and the WFR-MT firmware upgrade had finished installing successfully.  I switched the connection back to the Wi-Fi/DSL that we get to use as part of our “rent” while we are here.  I switched our laptops back to our internal Wi-Fi network and then shut the Verizon Mi-Fi off to let it recharge.

Neither of us was very hungry after snacking late this afternoon so Linda sliced the remaining tofu and pan-seared it.  She caramelized onions, added BBQ sauce, and served it open faced over the tofu.  After dinner Linda made a list of things we needed to take tomorrow while I made a final check of e-mail.  I e-mailed Lou Petkus to let him know that we were booked into the Prince of Tucson RV Park for March 5th.  I sent a message to Curtis Coleman via RVillage to accept his invitation to boondock in his driveway and see if March 3 and 4 would work for him.  He phoned back to confirm that it would be OK and then sent his address via TXT message.  I also had an e-mail from Kate de Fuccio and replied to that.  I checked for updates and my computer had several more to install so I started that process.  I checked Linda’s computer but she did not have any updates pending.  Although we got a lot of other things done today it felt like I had mostly dealt with computer updates.  Update days are often like that and you cannot schedule them because you never know when Microsoft is going to drop a big ‘update bomb’ in your lap.

Linda went to bed around her usual time.  I turned in shortly thereafter and much earlier than I have been.  We plan to get up at 6 AM tomorrow, have a light breakfast, finish packing for our trip, and be on the road at 7 AM.  We will stop at Albertson’s in Blythe, California for some water, ice, and other snack items to get us through the day to dinner at Native Foods in Palm Springs and give us something to eat on Friday while we are at the Peg Leg gathering.  Albertson’s opens at 6 AM PST, which corresponds to our 7 AM MST departure time.  We should arrive at the south entrance to Joshua Tree National Park around 7:30 AM PST which will give us a good, long day to explore the park.

 

2015/02/06 (F) KOFA NWR Palm Canyon

 

Palm Canyon Road entrance to KOFA NWR.

Palm Canyon Road entrance to KOFA NWR.

I slept in until 8 AM, got up, put on my sweats, and made a pot of coffee.  While that was brewing I turned the TT-400C TPMS monitor on and then adjusted the pressures in the four car tires and checked the passenger side steer tire on the bus.  Based on the temperatures it was reporting the monitor appeared to not be picking up the six rear tires on the bus so I plugged the PressurePro repeater in.  It is mounted in the passenger side rear corner bedroom cabinet and Darryl Lawrence said it should work fine with the TT-400C monitor.  Consumer TPM Systems all operate on the same frequency of 433.92 MHz and the repeater just receives, amplifies, and retransmits signals on that frequency.  The sensors have a unique digital identity and send out an encoded digital signal; that’s how the receiver/monitors know which signals to display and ignore the rest.

Linda in the parking lot at the mouth of Palm Canyon, KOFA NWR, AZ.

Linda in the parking lot at the mouth of Palm Canyon, KOFA NWR, AZ.

The north wall of Palm Canyon, KOFA NWR, AZ.

The north wall of Palm Canyon, KOFA NWR, AZ.

 

 

After a breakfast of juice and cinnamon raisin oatmeal Linda went for a walk while the air temperature was still cool.  I stayed at the coach and dumped the holding tanks, made up our mixture of a bottle of PineSol with an equal amount of water and a cup of Calgon bath beads.  Shake until dissolved and add ~60% to the black tank (via the toilet) and the other 40% to the gray tank via the bathroom and kitchen sinks, including the In-Sink-Erator.

 

 

 

 

The beginnng of the Palm Canyon trail, KOFA NWR, AZ.

The beginnng of the Palm Canyon trail, KOFA NWR, AZ.

 

 

With my chores done I recorded the dump in our notebook and then added the information to our Water Usage spreadsheet.  According to the spreadsheet and our notebook it had been 19 days since we last emptied the waste tanks.  I knew that wasn’t possible as we normally dump every 9 to 10 days when we are in normal water usage mode, and Marilyn was here for the first half of that interval.  Clearly we had forgotten to record a dump 9 or 10 days ago.

 

 

The north wall farther into Palm Canyon, KOFA NWR, AZ.

The north wall farther into Palm Canyon, KOFA NWR, AZ.

 

 

 

I finished working on some additional draft items for the survey the FMCA National Education Committee wants to send out.  I sent them to the committee chair (Gaye) and the member whose items I was revising.  We have another phone meeting on Monday and I wanted to get these items out to the committee by tomorrow so the members have time to look at them.

 

 

 

 

 

 

 

I got an e-mail from Gary at BCM last night advising the editor that I was doing an article on Quartzsite for the February 2015 issue and would have it done by the end of next week.  I e-mailed him back last night and then wrote it this morning and e-mailed it to him and Mike, the editor, for review.  Although I am no longer employed, I sometimes still work better against a deadline.

Deeper into Palm Canyon approaching the 1/2 mile mark.  KOFA NWR, AZ.

Deeper into Palm Canyon approaching the 1/2 mile mark. KOFA NWR, AZ.

After cleaning and waxing the bus and spending a lot of time sitting in front of our computers we wanted to get away from camp and do some sight-seeing.  The repair we had done yesterday to the passenger side rear tire on our car seemed to be holding so at 2PM we headed for the King OF Arizona (KOFA) National Wildlife Refuge (NWR) Palm Canyon area about 20 miles south of town.

A lone palm backlit high up on the south wall of Palm Canyon, KOFA NWR, AZ.

A lone palm backlit high up on the south wall of Palm Canyon, KOFA NWR, AZ.

This seemed like a good spot to stop and let Linda take my picture for a change.  Palm Canyon, KOFA NWR, AZ.

This seemed like a good spot to stop and let Linda take my picture for a change. Palm Canyon, KOFA NWR, AZ.

Palm Canyon is an enormous slot in the Kofa Mountains.  The canyon is aligned ENE to WSW opening to the WSW so we figured the best light would be in the mid-to-late afternoon.  To get there we drove south out of Quartzsite on US-95 about 19 miles to Palm Canyon Road and then east for seven miles on a good gravel roadway.  Good is relative, of course; it took as long to drive the 7 miles as it did the 19.  The trailhead is at the end of the road, which is the beginning of the canyon.  There are also several areas just off the parking/turnaround designated for tent camping, and it would be a spectacular place to pitch a tent.  The last mile or so of the road climbs more than you realize until you get to the parking area and are treated to a sweeping view of part of the La Paz Valley that stretches for over 100 miles from Parker on the north end to somewhere north of Yuma on the south end.

 

Looking WSW back out of Palm Canyon at the La Paz Valley.  The trail climbs it goes deeper into the canyon.  KOFA NWR, AZ.

Looking WSW back out of Palm Canyon at the La Paz Valley. The trail climbs it goes deeper into the canyon. KOFA NWR, AZ.

 

There they are!  The fan palms of Palm Canyon high up in a shaded crevice on the south wall of the canyon.  KOFA NWR, AZ.

There they are! The fan palms of Palm Canyon high up in a shaded crevice on the south wall of the canyon. KOFA NWR, AZ.

The trail is a 1/2 mile hike into the canyon near the floor but to the south of, and above, the central drainage wash.  The canyon is named for the California Fan Palm trees that grow there; the only naturally occurring Palm trees in Arizona.  There is lots of other vegetation in the canyon, however, and the palms are a bit elusive.  About a half mile in there is a small wooden sign with an arrow pointing up to the left at a 45 degree angle.  All the sign had on it was the word “PALMS.”  And there they were, way up in a narrow crevice.  Mind you, some of the trees in this main grove have trunks that are 20 inches in diameter, but the canyon is a big place and the trees are far away from where we were standing.  The only wildlife we saw up close were small lizards about 3″ long, 6″ with their tails.  We heard and then saw a bird soaring high above the southern edge of the canyon but could not tell what it was.

 

Delicate colors on the north wall of Palm Canyon in the late afternoon sun.  KOFA NWR, AZ.

Delicate colors on the north wall of Palm Canyon in the late afternoon sun. KOFA NWR, AZ.

 

The light was nice hiking in and got better and better as we hiked out.  The trail climbs quite a bit from the parking area, but not steeply in any one place.  We took our time and I took a lot of photographs.  By the time we got back in our car the sun had slipped behind the Dome Rock Mountain Range that defines the western edge of the La Paz Valley.  We had nice colors in every direction but without any clouds we did have a particularly photogenic sunset.  By the time we got back to US-95 it was approaching 6:20 PM and we needed our headlights even through the glow along the crest of the mountains continued almost all the way back to town.

Looking back into Palm Canyon as we hike out.  KOFA NWR, AZ.

Looking back into Palm Canyon as we hike out. KOFA NWR, AZ.

 

 

 

Linda made a green salad with fresh tomatoes and blueberries, dried fruit, and nuts and dressed it with Raspberry Walnut Vinaigrette.  She heated up a couple of tortillas and used them to make a quesadilla-like thing with Daiya (vegan) cheese, tomato slices, and jalapeño pepper slices.  We had a small glass of Franzia Refreshing White wine with dinner and had red grapes for desert.

 

 

Before we left for our hike I had unplugged the power supply from my ASUS notebook computer to let it cool off.  It seems to me that it runs hot.  I plugged it in when we got back and had a notification on the screen that the computer needed to be restarted to complete the installation of updates.

 

The only wildlife we saw up close in Palm Canyon.  KOFA NWR, AZ.

The only wildlife we saw up close in Palm Canyon. KOFA NWR, AZ.

 

The north wall at the entrance to Palm Canyon in the glow of sunset.  KOFA NWR, AZ.

The north wall at the entrance to Palm Canyon in the glow of sunset. KOFA NWR, AZ.

I decided to check my e-mail first and had a couple from Gary, so I called him after we finished dinner and we chatted for about an hour.  It sounds like the article I sent him this morning on Quartzsite 2015 won’t run until the March issue, so that will give me a little more time to select and process photos, experience more things here, and possibly extend the article a bit.  In the meantime Gary is going to have Stacy proofread all of the articles that are ready plus the one I just sent.

 

 

My ASUS laptop keyboard appears to be functioning correctly again so I was reluctant to restart my computer, but the message said it would restart in one day on its own anyway.  I guess there’s no time like the present to find out if the machine has a problem.  It finished whatever it was it needed to do, powered down, and restarted without a hitch.  I then copied all of the photos from our canyon hike to the computer and NAS and started looking at them.  I processed a few and then went to bed.

 

2015/02/01-05 (N-R) Another Month in Q

2015/02/01 (N) Hola February

Yesterday would have been an excellent day to continue cleaning and waxing the outside of the bus—cool and cloudy without a lot of breeze—but it was also an excellent day for the inside computer work that we both needed/wanted to do.  I downloaded the free version of the Simple:Press forum WordPress plug-in the day before yesterday and was going to make a priority of installing it today on the FMCA Freethinkers website I have been developing until the activation of the Jetpack Site Management feature caused the admin panel (app) to crash.  We have had a problem for a while with one member who was unable (or unwilling) to interact appropriately online via our e-mail reflector.  The reflector does not require a login and does not have any way to moderate discussions or block/remove posts, so our options as a chapter were very limited.  A WordPress-based forum would give us all of those features.

I had an e-mail reply from support@ipower.com indicating that the Wordfence plugin had caused the problem.  They needed the answer to the security question in order to authenticate my support request and fix the problem. Bob Pelc provided me with that information which I supplied back to ipower.com.  Later in the day I got an e-mail indicating that the problem was resolved and I was, in fact, able to log in without any problems.  The e-mail said the Wordfence plugin had caused the crash and that they disabled it, but after I logged in it was still activated.  I did not, however, take the time to check if it was functioning correctly.  I also did not install the Simple:Press forum at this time.

For breakfast Linda improvised a potato tofu scramble with nutritional yeast, garlic, and other seasonings.  It was a hearty and flavorful start to the day.  After breakfast I called Jim A. back to discuss the FMCA seminar listing categorization document we have been working on.

I settled in to work at my computer on the consolidated blog post for November 10-16 while Linda settled in to work on accounting for the bakery.  She is also approaching the time of year when she has to pull tax returns together.  She uses Turbo Tax and needs an updated version each year.  The products she needed were on sale through Amazon Prime.  She purchased and download them, which also placed them in her Amazon software library, and they installed and opened without a hitch.

I got an e-mail from Harvey Carter (AC8NO), president of the South Lyon Area Amateur Radio Club (SLAARC), asking me to update the officer listing on the club website.  I took care of that and also changed that contact form (Contact Us page) to e-mail him instead of former president Mike Sharpe (WX8H).

By 2:30 PM I was tired of sitting in front of my computer so I changed into my work clothes and spent an hour trying to clean and wax a couple of windows on the bus.  The passenger side, which faces south, was so hot I cloud not touch it for very long, so I worked on the north side in the shade.

Jim/Flo L. and Jim/Barb B. disassembled the Select Comfort air mattress we had put in the park model trailer and divided up the parts.  We were going to donate it to the Salvation Army but did not get it done fast enough.  Jim B. would like the pump and controllers but Butch and Fonda need them to replace the defective unit on the mattress in their guest bedroom.  Since that is where I sleep when I am there, it is in my best interest to give it to them.

We invited all of our neighbors to come over for happy hour at 4 PM.  Barb B. came over with a glass of wine at 4:20 PM, so I poured a glass for Linda and me.  Jim B. was taking a nap as were Butch and Fonda.  (Hey; retirement is hard work!).   Butch and Fonda eventually shook the cobwebs out and came over.  Jim and Flo L. arrived but busied themselves with dinner preparations.  They were joining Jim/Barb B. for a belated Christmas dinner.  Jim B. eventually awoke and Barb left to join the other three for dinner.  Fonda left just before 6 PM to go to church but returned a few minutes later.  Apparently the evening service had been cancelled because of the Super Bowl.  She and Butch visited as the sun set and eventually it got chilly enough that we all decided to go inside.

I e-mailed Chuck Spera and my long-time friend John (J. C.) Armbruster earlier in the day but had not gotten responses from either of them by bedtime.  During the evening I had e-mails going back and forth with Steve Willey regarding the upcoming informal FMCA Freethinker gathering at the Liar Peg Leg Smith Monument boondocking area in Borrego Springs, California.  I also e-mailed Jim Ellmore regarding the same event.

A typical sunset in Quartzsite, Arizona.

A typical sunset in Quartzsite, Arizona as seen from our campsite on the north end of town.

2015/02/02 (M) Market Day

The last 24 hours have brought into focus why we are here for the winter.  It will be sunny and 80 degrees F today.  Detroit got 16.7 inches of snow from the storm that hit over the weekend, with 12 inches in Ann Arbor and similar amounts in Dexter, Howell, and Brighton.  When we checked this morning it was 7 degrees at home and going up to a high of 14.  Yeah, we are not missing that.

Breakfast was the bland store-bought bulk granola we have had to eat since running out of Linda’s homemade granola some weeks ago.  I wish we could carry a five-month supply of her granola; it’s that good.  Right after breakfast Linda started putting together menu ideas and a shopping list while I reviewed the latest seminar listing from Jim A. and e-mailed it back to him.  He called later to discuss it briefly.  I started working on yet another consolidated blog post for 17-23 Nov 2014 and did that until I could not stand to sit any longer.  The antidote for was go outside and work on cleaning and waxing the rear cap of the bus.

Butch and Fonda left around 9 AM and drove to Parker to go shopping at Wal-Mart.  Back home they shop at the Wal-Mart in Logansport and are familiar with the items there.  Not long after they left Linda drove to Blythe, California to do our grocery shopping for the week.  Of the supermarkets available to us we prefer the Albertson’s in Blythe, followed by the Smart & Final Extra at the same intersection.

Butch and Fonda returned from shopping and so did Jim and Barb.  Butch asked if I had ordered the coil for the MAC solenoid air valve that controls the a-c shutters behind the front bumper.  I hadn’t, so I took a break from cleaning and waxing the outside of the bus and called MAC Valve to order a replacement coil for the 111B601BAAA solenoid valve.  (I still have the old valve but I do not think I have it with us in the bus.)

Jim L. stopped by with some very fresh grapefruit and we got to talking about automotive detailing.  He recommended Finesse from 3M for polishing paint without leaving marks.  He said it works so well that the paint looks “wet” when you are done.  Butch had also suggested that I look at the Cyclo 5 dual head orbiting buffer/polisher.  Apparently this machine can finish paint with no swirl marks.

The FMCA Freethinker website /WP-admin/ panel was back up and running.  I logged in and checked the plugins.  They were all there but they had ALL been deactivated.  Tech support at ipower.com had indicated that they were going to disable the Wordfence plugin.  I re-activated most of them, but not all, and specifically did not re-activate the Jetpack plugin.  It is a large, feature rich plugin and the only thing I use is the Carousel feature to manage native WordPress image galleries.  Unfortunately I need that feature and have not found another plugin that does what I need.

I worked for most of the evening on the consolidated blog post.  By the time I finished it was too late to start selecting and editing photos, so I will do that tomorrow if I have time.

2015/03/03 (T) Wax On, Wax Off

I knew there was something else I was supposed to do yesterday, but I could not remember what it was.  I sometimes put “tasks” on my calendar, but that does not help if do not check it.  I remembered this morning what it was; I needed to call Sunset Sportswear in South Lyon, Michigan and follow up on an e-mail I sent last Thursday regarding our order for personalized SLAARC jackets.  I made that call and Pam took our credit card information.  Barb handles sales but had not made it in yet due to the snow.  Sunset Sportswear was closed yesterday because of the storm so if I had remembered to call them it would have been for naught.  Things often work out like that.

I also got an e-mail from the Escapees RV Club regarding the upcoming Escapade rally.  It indicated we could extend our stay until Sunday noon.  I called Lou Petkus, the head staff photographer for the Escapade, to let him know.  The rally ends on Thursday with normal departure on Friday and staff departure on Saturday.  Lou is trying to arrange a photography field trip for Saturday so the fact that anyone can stay until Sunday should help with participation.  I called the SKP headquarters and booked the extra night.

I confirmed which RV Park Lou and Val will be in on March 5th and I think we will try to get in there as well.  That location will position us close to the rally venue and allow us to caravan in together and park together.  (We have to be in by 11AM on the 6th.)  That, in turn, should make our staff photography work more convenient.  We plan to hang out (dry camp) with RVillage founder Curtis Coleman for a couple of nights before this at his rental home near Casa Grande, which will put us a lot closer to Tucson than we are here in Quartzsite.

We had also mentioned to Lou and Val at Quartzfest that we were thinking of heading to Organ Pipe Cactus National Monument after the Escapade.  They had been discussing it and decided they would like to go there as well so we will probably caravan there with them.  After OPCNM we plan to head to Big Bend NP (BBNP) in Texas and Lou and Val would also like to go there.  That is a three day drive for us, and we may take six or seven days to get there depending on where we might stop and what there is to see long the way.  Whether we travel together or separate will be determined later.  Our friend, Mara, and another women from the WINs are also headed to BBNP sometime in March and we have tentatively agreed to meet up with them if we can work out the timing.

I checked my e-mail and had a reply from Jetpack tech support at WordPress.com. “Happiness Engineer” Jeremy said that Wordfence has been known to cause issues with the Jetpack plugin.  He acknowledged that Wordfence is a powerful and important plugin but can be very aggressive in protecting websites.  Given that Wordfence appears to have caused the crash of the FMCAA Freethinkers WordPress /WP-admin/ Jeremy said I probably did not need to reinstall the Jetpack plugin.  I filled out a support ticket yesterday for this issue on the Wordfence website as I have a premium (paid) membership.  They acknowledged the support ticket right away but an actual response will likely take longer.

I had all of these communications chores done by 11 AM and decided to continue cleaning and waxing the outside of the bus.  I started with the rear, as it was still in the shade, and finished the lower half.  It was tedious as that is the engine hatch and it has numerous horizontal indentations that run the full width.  These indentations are open on the inside top for airflow and have screens to keep things from getting in (like fingers).

Another view of the sunset from our campsite in Quartzsite, AZ.

Another view of the sunset from our campsite in Quartzsite, AZ.

I continued on around to the driver side of the bus which faces north.  The temperature this afternoon got up to 80 degrees F, and it was very hot in the sun, but it was pleasantly cool in the shade of the bus.  It was near perfect conditions for the work I was doing.  I worked most of the afternoon and did not quite get the back half of the bus cleaned and waxed.  A couple of bay doors and I will be past the half way point on that side.

I am going to try to work on this at least a few hours every day, otherwise it will never get done and this is an ideal place to work on it as long as I am not working in the sun.  The south facing passenger side is going to be more of a challenge and I will have to limit my work to the morning before the body panels heat up.

UPS showed up today with my coil for the MAC valve which turned out to be an entire new valve.  Rather than try to remove the solenoid coil I may just install the whole valve.  UPS also brought Fonda’s new sewing machine.  It only weighs 13 pounds.

Butch got back from a rock hunting field trip late in the afternoon and we stood around chatting as an amazing sunset developed around us.  As I have mentioned before, sunsets here are often 360 degree events and this one surrounded us with color before finally fading into another starry night.

Linda made a wonderful dish for dinner last night and we had it again this evening.  She pan-grilled polenta and served it on a bed of dark leafy greens topped with puttanesca sauce made from scratch.

After dinner I selected photographs for my November 17 – 23, 2014 blog post and processed them.  I uploaded the text to our WordPress site and then uploaded, captioned, and integrated each photo in turn.  I also had to enter all of the tags, which I figure out as I read through the post.  If there is one thing I would like to have at this point it is the ability to highlight key words and phrases in my Word document and have them automatically become tags when the text is uploaded.

By the time I published the post and went to bed to finish this one it was midnight.  At eight minutes after midnight MST I was one hour into my 63rd year as I was born on this date at 00:08 in the Central Time Zone, where eight minutes past midnight happened an hour ago.

2015/02/04 (W) 63 and Counting

I finished my blog post for yesterday late last night and e-mailed it to myself at eight minutes after midnight, the hour and minute of my birth, or so I have always been told.  Linda and the cats were all asleep and I observed the moment in quiet solitude.  As I noted at the end of yesterday’s post I was actually an hour late in my observance as we are currently in the Mountain Time Zone and I was born in the Central Time Zone.  But it was the thought that counted.

Sixty-three is not a milestone birthday anniversary, other than making it that far.  On my 60th birthday I became eligible to retire, and did so four months later.  On my 62nd birthday I became eligible to start drawing social security, but didn’t.  On my 65th birthday I will become eligible for Medicare.  The year I turn 66 Linda will apply for Social Security benefits and immediately suspend them.  I will be eligible for my full Social Security benefit but will not apply for it.  I will apply for the spousal benefit instead.  Our monthly Social Security benefits continue to increase by 8% per year until age 70, a solid and guaranteed return, so Linda will start taking her benefits then and I will file for, and take, my benefits when I turn 70.

Having thought through the complexities of birthdays, we had breakfast and then I got to work cleaning and waxing the outside of the bus.  My plan was to finish the driver side but not spend all day at it.  As it turned out, I spent most of the day at it, taking breaks to check e-mail.  It is just slow work, especially since so much of it has to be done on a step ladder.  I have no idea how many trips I made up and down that ladder, but it was a lot.  It is only a seven foot step ladder so I have to stand near the top to reach the top of the sides which are over 12 feet from the ground.  I cannot reach very far to the side either, so I work from one side of the ladder then climb down and climb up the other side and work from there.  I then climb down and move the ladder about three feet and do it all again; over, and over, and over.  But as Long as I keep going it eventually gets done.  I am, however, seriously considering getting a Cyclo 5 dual head orbiting buffer/polisher.  There is simply too much bus to do this by hand.  I am also considering getting a platform to put between two ladders and/or a four-wheel elevated work platform to use in the barn if/when we get it built.

I got a call from our daughter wishing me a happy birthday and had a nice chat with her.  I asked if Katie had made a final college selection but she is not done with interviews yet.  Perhaps we will know in a few weeks where she is headed in the fall.

Yesterday Linda invited all of our camping neighbors to come over today at 4 PM for happy hour to celebrate my birthday.  In preparation she spent part of the day making cupcakes with chocolate frosting.  When she wasn’t cooking she did accounting and tax return work for Butch and Fonda.  Around 3 PM she prepared bruschetta using what was left of a loaf of Barry’s Basic Bread and the puttanesca sauce she made a couple of nights ago.  Larry/Sandy, Jim/Barb, and Butch/Fonda all brought chairs and beverages of their choice.  Butch and Fonda brought chips, salsa, and hummus and the peanut and dried fruit mix they make.  We sat around talking until the sun set at which point the air temperature cooled off and we all retreated to our rigs.

I got a call from our son during our happy hour and excused myself for a few minutes to chat with him.  It was 7:40 PM back in Ann Arbor and Madeline was getting ready for bed.  I got to “chat” with her and she wished me a happy birthday.  With encouragement from her mom she asked me “How is Arizona?”  I told her it was very nice here.

We skipped lunch today and did not have dinner because we filled up on happy hour snacks.  Linda played online word games while I started assembling the consolidated blog post for November 24 – 30.  She turned on the MiFi and trundled off to bed to watch an episode of Downton Abby on her iPad.  I finished editing the post and selected two photos to go with it.  When I checked I found that I did not have photos for most of the days covered by the post.  I thought about uploading it but decided against it as it still takes time to upload the text, upload and insert the pictures, and create all of the tags and I was too tired to maintain the needed concentration.  Somewhere in there I read through a reply from Chuck Spera and sent him the next volley in our e-mail conversation.

Overall it was a good 63rd birthday.  Given our winter travel lifestyle I face the interesting prospect of celebrating my birthday somewhere different every year for many years to come.

Our fellow campers gathered by our bus for my 63rd birthday happy hour.  L-2-R: Sandy, Larry, Barb, Jim, Butch, Fonda, me.   Photo by Linda (not shown).

Our fellow campers gathered by our bus for my 63rd birthday happy hour. L-2-R: Sandy, Larry, Barb, Jim, Butch, Fonda, me. Photo by Linda (not shown).

2015/02/05 (R) A Screwy Tire

The overnight lows are now dropping into the upper 40’s at night and the coach cools off just enough that I turn the heat on in the front of the bus while I make coffee in the morning.  Soon enough the sun starts heating up the coach and we are pulling the accordion shades down to keep it out and opening windows and turning on ceiling exhaust fans to draw cool air in.  A couple of days ago we finally put the awnings out on the south facing passenger side of the coach.  Between the patio awning and the bedroom awning they shade more than half of the upper portion of the coach and help keep the interior temperatures in check.  We have not had them out much, however, because of the somewhat persistent winds in the La Paz Valley.

After breakfast I wanted to setup the TireTraker TT-400C TPMS.  Once I started I would need to install the sensors on all 13 tires.  In order to install the sensor on the spare tire in the car I had to empty out the back so I could get to the tire.  Linda was helping me and noticed a screw in the passenger side rear tire.  It was right at the edge of the tread but not technically in the side wall.  The tire was holding pressure but when I started to back the screw out it started to hiss so I screwed it back in.  Nuts.

Linda got online to look for tire repair shops in Quartzsite.  The first three numbers we tried were out of service and the Love’s Truck Stop only repaired big tires, not small ones, so I called Jim Liebherr to see if he knew of some place in town.  Flo answered the phone and could not locate Jim so I asked for a return phone call.  Butch then offered to drive me downtown where he thought he remembered seeing a tire shop.  As we were pulling out of our camp it occurred to Butch that the RV Pit Stop, just south of us on Central Avenue, might do tire repairs.  Before we even got that far we saw the sign for Best Auto and Tires.  We have walked or driven past this place dozens of times but never paid any attention to the fact they sold and serviced tires.  At the time we did not care.

They said they would have to see the tire so we drove back to camp and I drove back in the car.  They said they could repair it properly with an internal patch and they would get right on it if I wanted to wait for it.  $14.  Deal.  I could easily have walked back to camp from there but I was back with the car within an hour.  If the tire had not been repairable we would have had to take it off the car and use Butch’s Chevy Suburban to drive it to Yuma or Lake Havasu City where there are Discount Tire Locations.

Jim L. returned my earlier phone call while I was waiting for the tire.  He and Flo use a dentist in Los Algodones, Mexico and are very satisfied with the service and price.  I have a tooth that is bothering me just a bit and was giving some serious consideration to making an appointment with someone in Los Algodones.

I installed the batteries in our new TT-400C sensors and programmed the baseline pressures into the monitor (receiver).  I then installed the sensors on the bus and car tires, linking each one to the monitor as I went.  Programming the baseline pressures first is the easier way to install the system.  In setup mode the monitor displays each tire position in turn.  While the position is displayed a sensor is screwed onto the valve stem.  The application of pressure to the sensor “wakes it up.”  When the sensor starts transmitting the monitor associates it with the displayed tire position.  After exiting setup mode only the programmed tire positions display on the monitor.

In addition to the overall setup procedure there are several things I like better about the TT-400C system compared to the PressurePro system we have had since the 2008 FMCA national rally in St. Paul, Minnesota.  A major one is that the baseline pressures are programmed into the monitor.  On the PP-TPMS the baseline pressures are determined by the pressure in the tire at the time the sensor is put on.  Another thing I like is that the TT-TPMS monitor is powered by rechargeable batteries and is not plugged in when in use.  That makes it much more convenient to move it between the bus and the car, but especially to carry it around while installing and associating the sensors to wheel positions.  Finally, I like the sensors, which are much smaller and only weigh 0.4 ounces each.

Linda helped me reload the back of the Element and sort through all of the “stuff” that was “stuffed” in the glove box and the passenger side dashboard trays.  (When was the last time someone actually stored gloves in an automotive glove box?).  With everything sorted out and repackaged in ZipLock bags I stored it back in the glove box and locked up the car.

Linda spent part the morning working on accounting and tax returns for Butch and Fonda and talking on the phone to Dave, the controller at Metropolitan Baking.  I got a call later from Jim Ammenheiser and then did a final proofreading of our Education Committee recommendation to FMCA staff for how to restructure the categorization and listing of seminars and activities in the national rally programs.

We took a break and had the last two cupcakes from yesterday with some vegan Mocha Almond Fudge coconut “ice cream.”  We were supposed to have these last night for my birthday but we were not hungry after snacking at the happy hour birthday gathering.  Linda then went for a walk.  Linda got me a birthday card and a towel with an elastic edged hole for my head.  I tend to get food on my shirts when I eat and the towel is basically an adult bib that can be easily laundered.

Our fresh water tank was a bottle cap shy of empty so I filled it.  It usually takes about 50 minutes to fill the tank starting from empty so I set the timer on my smartphone for 40 minutes.  When it signaled me to check on the progress the tank was already overflowing.  (It has a vent tube on top of the tank that runs through the floor of the bay.)  I don’t think I wasted more than a few gallons of soft water so it should not throw my water usage and softening calculations off by much.  The good news was that the post-fill hardness test showed the water coming out of the softener at 0.0 to 0.5 gpg total hardness (0 to 10 ppm.)  That was better than the reading I got right after I recharged the softener, so perhaps it still had some residual salt in it initially.

At 4 PM I was getting ready to upload a blog post when the UPS truck showed up and dropped off two boxes for me.  It was the Chemical Guys microfiber products I had ordered recently, including two microfiber auto detailing aprons.  Butch returned a few minutes later with a small package for me.  It was the lens hood I had ordered for my Sony zoom lens and it had been mailed USPS.  He also had eight (8) Full River 6V L16 AGM batteries.  I helped him unload them from the Suburban onto the concrete pad on the driver side of their bus.  Fonda emptied out the driver’s side of their battery bay and she and I then moved the batteries to the bay where Butch positioned them.  He left them in their boxes and will install them when they get back to Twelve Mile.

At 5:15 PM I finally got around to uploading the consolidated blog post for the last week of November (2014).  I then started thinking about what to do with my December 2014 posts.  As of today I am still 67 posts behind and putting up daily posts is not realistic.  In looking through my photos I was surprised to find that I took very few from the time we left the house until we arrived in Quartzsite.  I decided to do consolidated posts for Dec 1 – 4 (Twelve Mike, IN to Alvarado, TX), 5 – 8 (visit with Donn Barnes), and 9 – 12 (travel from Alvarado to Quartzsite, AZ).  I have more pictures for the rest of the month, so I will have to figure out what makes sense.  I compiled the posts for December 1 – 4, selected and processed one photo, uploaded it, selected the categories, and entered all of the tags.  I posted it and then realized I wanted to edit the URLs slightly so I logged back in and found that I was unable to type anything.

It took me a while to figure out that the problem was the built-in keyboard on my ASUS G750JM ROG notebook computer.  I got it at the end of April last year, so I have only had it for eight months.  I decided to run a full scan using ESET Smart Security since I could do that with just a mouse and the Bluetooth mouse was working just fine.  It found 18 threats and dealt with 16 of them.  I then ran CCleaner, after which I enabled the onscreen keyboard.  Although intended for use on touchscreen computers, at least I could type things into a search box using my mouse.

I found some references to similar problems on answers.microsoft.com with the suggestion to examine the keyboard device properties.  If it indicated the device was installed and working correctly it was probably not a Windows 8.1 problem.  The other suggestion was to try an external keyboard.  If that worked it would confirm a keyboard hardware problem.  I had already gotten my Gigaware wireless keyboard out so I plugged in the USB dongle, turned on the keyboard, and voilà, I could type again!

Another post on the Windows forum listed website links for ASUS support so I started following those.  One ASUS website wanted the serial number of my computer, which I had to get off of a tag on the bottom of the case with really small type.  Once I had that entered correctly I was able to go to a download page with 81 files available, including bios and chipset code.  There were two files that seemed to have something to do with the keyboard.  By 1:15 AM I had a half dozen tabs open in two different browsers with no definitive understanding of what had happened or what to do to fix it.  I then realized that the Shift Lock key on the keyboard was illuminated and I could toggle it on and off.  I could also toggle the Number Lock, so I tried typing and the keyboard was working once again.  That, however, did not give me any confidence that it would continue to do so.  I decided I was not going to shut the computer down for fear of not being able to log back in on startup.  I was not about to start downloading and installing anything at that hour so I went to bed tired, annoyed, and, frankly, a bit discouraged by this unwelcomed turn of events.

 

2014/12/26-31 (F-W) Wrapping Up 2014

Note: This post covers the last six days of 2014. It is long and there are no pictures.  Sorry.  🙁

2014/12/26 (F) Cool Letters

When we woke up at 7 AM the temperature was 41 degrees F but by 8:30 it had dropped to 35.  According to the Weather Channel app on our iPads we have a freeze warning posted for the overnight hours tonight (Saturday 0000-0800).  The 12-day forecast is for an extended period of cooler temperatures with highs in the 50s and lows in the 30s, including a few nights near freezing, but that is normal for Q at this time of year.  Desert regions are not always hot and actually experience an extreme range of temperatures.  The forecast back home has lows dropping into the teens with one night forecast at 13 degrees F.  Burrrrr.

Connie was apparently tracking the weather in Q as well, even though she and Joe are back in Nevada for most of the winter, as she called to ask me to turn the water off at the street if the temps got down to freezing.  The city water system here has supply pipes that come straight up out of the ground near the street, turn horizontal, go through a valve, then through a pressure regulator or small meter (not sure which or both), go through another valve, and then turn 90 degrees and go back down into the ground.  Joe and Connie keep all of this covered under a wooden box and we have noticed other properties doing the same thing, but not all.  Although the temperatures here can/do drop below freezing in December and January it is never for more than a few hours just before sunrise.

Presumably the city water lines are deep enough to avoid ever having freezing problems, but I do not know how deeply the pipes are buried on Joe and Connie’s property.  The main thing at risk are the stand pipes that come up out of the ground at each RV site and any hoses that are attached to them. I discussed all of this with Butch as it seemed to me that it would have to get below freezing and stay there for quite some time before we would have any problems.  It also seemed to me that if we were going to turn the main water supply off we should open a faucet on each of the supply risers so the water would have somewhere to go as it expanded.  (Water expands as it cools, reaching a maximum volume at around 34 degrees F.  As it changes state from liquid to solid it actually contracts slightly in volume.)  To be really safe we would need to drain all of the flexible hoses.  That struck both of us as unnecessary.

The aisle lights did not work again last night.  It’s always something with a RV and you have to be psychologically prepared for that or the lifestyle will drive you crazy.  This problem has occurred before and the usual reason is that the (3-way?) switch by the dinette gets toggled and renders the push switch in the bedroom inoperative but that was not the case this time.  One of the three wires that go to that switch was only attached by a few strands and broke when I checked it.  None of the connectors are in good shape so repairing those connections moved to the top of my bus project list today.  I did not get to this today, I only moved it to the top of my list.

While I made our morning coffee Linda put together an Amazon order.  Amazon Prime has worked well for us and Butch has already successfully received a UPS shipment here, so it was easier to order a bag of Science Diet cat food for delivery to our bus than to deal with the limited hours and selection of the local veterinarian or drive to one of the larger surrounding cities in the hope that a pet supply store that might stock the specific formulation we feed our cats.  She also ordered two bottles of Hach SofChek water hardness test strips and some additional silicon utensils.

Linda had our holiday letters stuffed and addressed on Christmas Eve, but not in time to get to the post office before it closed at noon, so she went today, bought stamps, and sent them on their way.  Hopefully they will arrive by New Year’s Eve while folks are still in the holiday spirit.

Sometime during the morning we got a visit from missionaries of the (local) Jehovah’s Witnesses cult.  Our conversation did not last long.  After they left I was pondering this day after Christmas visit and it occurred to me that perhaps they do an inventory of Quartzsite and the surrounding BLM camping areas so they know when someone knew has pulled into town.  I guess saving souls can be a lot of work.

Linda was doing the dishes and the Black & Decker SpaceMaker coffee carafe broke.  She checked online and was going to order a generic replacement but decided she should check the model of our unit.  When we lifted it up to look for the model number we discovered water on the shelf underneath it.  Ugh.  Suddenly we were no longer looking for a carafe but a new coffee maker.  We removed the cabinet door, latch, and lower front retaining bar and pulled the unit out.  I then removed the shelf, wiped it off, and took it outside to dry in the sun.  There are definite advantages to being someplace with bright sunshine and low humidity.

We spent a long time researching a replacement.  The particular model/style of SpaceMaker we have has not been made for years (of course), was only available used (naturally), and only for exorbitant prices (can you believe $300?) on Ebay.  To add insult to injury all of the reviews were negative, noting in particular that the unit tends to develop leaks.  Ya think?  We looked instead for something we could install, or at least store, in the same cabinet cubby as the old one.  Most of the countertop models were too tall and most of the built-ins and under cabinet models were too big, and very expensive.  We ended up ordering a simple Proctor-Silex non-programmable countertop unit without a clock for under $20 on Amazon Prime so the price included the shipping.  The reviews were good and it will store in the corner cabinet with room to spare for coffee canisters, freeing up space in the pantry for other things.  We will have to take it out and set it on the counter to use it, but that’s OK.

As noted in a previous post, there are quite a few houses and RVs around town with Over-The-Air (OTA) TV antennas on top of 20-30 foot poles and pointed approximately NNE.  There is one antenna in particular that we have seen a lot, a high-gain (directional) rotatable unit, and there are several vendors selling it as part of a kit.  The unit has an integrated amplifier and rotor and includes the rotor controller and power supply, plus 50 feet of coax and control cables.  All of the vendors are selling this kit for $70.  That’s a lot of stuff for that price, which suggests something about its quality (not good).  Another vendor is selling the poles and fittings that all of the other vendors use to build their “booths” (tents).  They have a huge assortment of connectors and will cut the sections to length if asked.  Getting the antenna 20-30 feet in the air would cost about $35.  We have been pondering whether it is worth it to us to spend this money as our bus-mounted antennas have always worked in the past and this is the first place we have been where they will not pick up even a trace of a signal.  We do not have an OTA TV antenna set up at home and it occurred to me that buying one here made more sense if it could be used back at the house.  I spent quite some time online researching long-range DTV antennas but did not come to any conclusions.

I needed a break from working at my computer and drove over to K & B Tools to see if they had shorter poles.  In the 1″ diameter they had 10′ and 8′.  The 8′ length would work well for us.  Three sections with two connectors would get an antenna 20-25 feet up depending on the mounting and we can store 8′ lengths in the front bay of the bus or in the car for transport.  We would use a base section with a flange by the driver side mirror, put a couple of long spikes through the base to keep it from moving sideways, slip the bottom pole section in it, and bungee cord the next section to the mirror support arm after wrapping it with something to keep it from scratching the paint.  Before making a purchase, however, I decided to do some more online research.

The unit being sold by several vendors is the Vortex HD from SewellDirect.com so I checked their website.  The unit is discontinued and they are selling the same kit online for $25.  That means the unit is of even cheaper construction than I originally thought and the $70 asking price suddenly seemed very excessive.  Many of the online reviews confirmed that this was not a serious antenna.  Another vendor had the Vortex and two competing units all for the same $70 price and I have concluded that they are all equally junk.

One of the websites I spent some time at was AntennasDirect.com. They appeared to have some serious antennas, with prices to match.  One of the challenges in this situation is that it appears we need to pull in OTA TV signals from a very long way away here in Q (70+ miles), whereas at home the distances are more like 40 miles.  Here in Q all of the signals appear to be coming from the same direction (although no one can explain why) so a high-gain, highly directional antenna is ideal and does not need to be rotated once it is aimed.  At home the TV signals potentially come from 270 degrees and the correct solution is an antenna with a broader reception pattern combined with an accurate and repeatable rotor.  If we do not need the rotor in Q we can forego that expense and technical complication until we get home.

One of the websites directed me to www.antennaweb.org.  This site is sponsored by the Consumer Electronics Association (CEA) and the National Association of Broadcasters (NAB).  You enter your ZIP code, and optionally your address, and it tells you what TV stations you might be able to receive and what direction the towers are from your location.  I put in the ZIP code for Quartzsite and it indicated five stations (ABC, CBS, FOX, NBC, and Independent), all 11 miles away at 234.8 degrees.  There are towers on top of a mountain in direction but they do not look like TV towers.  The direction was also surprising as it is almost 180 degrees opposite to where everyone has their antennas pointed.

As we know from our ham radio hobby RF waves can do strange things.  At the frequencies used for OTA Digital TV (DTV), however, things are “line-of-sight.”  The local speculation is that there are “repeaters” to the NNE but if that was the case I would expect the website to indicate that as the signal direction.  Another possible explanation is that the signals are coming over the mountains to the SW and bouncing off of the more distant mountains to the NE.  I would expect some multi-path distortion in this case, as the signals scatter off the mountains and arrive at the antenna from different directions, but if the antenna is sufficiently directional it might eliminate this problem.

My plan for today had been to work on my Exterior Makeover article for Bus Conversion Magazine and I finally got started on that late in the afternoon.  I finalized my selection of photos (I think) and split them up into those that will go in line with the article, print and digital, and those that will appear in the extra section of the digital edition.  I had just begun post-processing them when Linda started preparing dinner.  I have been wanting some pasta and tonight I finally got my wish.  She made a whole wheat linguine with mushrooms, onions, garlic, kale, sun-dried tomatoes, and asparagus.  What a treat.

I stopped over at Butch and Fonda’s bus to let them know about the www.antennaweb.org website.  Butch was watching an archived webcast that Technomadia did a few months ago with Nina Fusing, of the WheelingIt blog, on health care options for full-time RVers.  He had also installed Echolink software on his laptop but it was failing the Internet Connection test for UDP (User Datagram Protocol) ports.  The error messages indicated that it was probably a firewall- and/or router-related problem.  He had both so I tried opening UDP ports for forwarding in both places but it did not fix the problem.  I have never played with Echolink or UDP ports, so I was trying to figure out what to do in real time.  More research will obviously be needed.

I continued working after dinner processing photos for my article.  I received my draft of the Zena Power Generating System article back from Gary with corrections made by Stacy, his new administrative assistant.  I accepted them, made an additional correction, and returned it.  They are trying very hard to get the December 2014 issue out on December 31st and my Zena article will be one of the four in that issue.

2014/12/27 (S) Cool Temps

By 6:30 this morning our various weather apps were reporting that the temperature in Q was 31 degrees F.  At 7:00 I turned the thermostats up and climbed back in bed (electric heating pad).  I had not shut the main water supply off at the street last night so at 7:30 I got up, put on my “sweats,” grabbed a jacket, and went outside to tend to the water.  I cracked opened a faucet at each standpipe, ran water through hoses, and ran water through the hot and cold lines for both sinks in the apartment.  I shut everything off and went back inside where it was comfortably warm.

By the time I came back in Linda was up and making coffee.  How was that possible?  We have a single serving coffee funnel that sits on top of a mug.  It’s designed for cone filters but she simply folded one of our flat bottom filters and made it fit.  She ground up some beans, boiled some water in the microwave oven, poured it over the grounds, and let it drip.  I did not think we would have morning coffee in the coach again until the new coffee maker arrived next week so it was a nice treat.

I finished yesterday’s blog post while I enjoyed my brew.  I was busy enough yesterday that by the time I went to bed and tried to finish it there was too much to write and I was too tired to write it.  Linda developed a headache overnight and spent much of the day medicated and resting.  She does not get these very often anymore but when she does they put her out of commission for a day or so.  I then spent most of the day processing the photos for my next BCM article.

I took a break after lunch and worked with Butch setting up his laptop to work with Echolink ham radio software.  The software use TCP and UDP ports and requires firewalls and routers to be configured to provide port forwarding.  His laptop OS is Windows Vista, which has the Windows Firewall.  I was not familiar with UDP ports, had never set up port forwarding, and had never worked with Vista, so I was feeling my way as I went.  Their computers are connected to the Internet one of two ways, MiFi or WiFi, although the WiFi is sometimes connected through the MiFi.  Their MiFi is a Verizon Jetpack (Novatel 5510L), just like ours, so I (sort of) knew my way around that device.  Their WiFi setup consists of two WiFi repeater/routers; the WiFiRanger Mobile and the WiFiRanger Go2.  We also have a WiFiRanger Mobile, so I also knew my way around that device (sort of) but I had never worked with the WFR Go2.  We got the Echolink software to test successfully through the WFR gear using the WiFi signal at our campsite but we could not get it to test successfully through the MiFi.

In the early evening Butch called and said he was having Internet connection issues.  I went to their bus and worked four a couple of hours trying to sort out what was going on.  I was able to get him back online but saw some strange behaviors that we could not explain and were not able to resolve.  He has Nick Russell’s Gypsy Journal Blog set as his Firefox home page and it kept redirecting to the website’s home page.  I tried opening it in Internet Explorer 9 and it opened without difficulty.  Website’s do not always react the same way with different browsers, but he had been on Nick’s blog earlier in the day using Firefox.  I will have to look at it again tomorrow.

When I got back to our coach Linda was starting to prepare dinner.  It felt very cold outside even though the weather apps said it was 41 degrees F.  I decided to turn off the water supply at the street and opened some of the faucets to relieve the pressure in the pipes and let some of the water out.  Dinner was leftovers from our Christmas Day meal and everything was very good the second time around.

I finished up my photo editing a little before 10 PM and backed up my files to the NAS.  We turned the three thermostats on and set them for ~15 degrees C (~59 degrees F).  We put the extra blanket on the bed and I turned my electric heater pad up to 4. The forecast low for tonight was in the low 30’s and it was already 36 when we turned in for the night.

2014/12/28 (N) Cooler Yet

Our cats snuggled in with us more than usual last night.  They like the extra blanket and the heater pads as much as I do.  At sunup the air temperature was reported as 28 degrees F, a few degrees lower than the last forecast we saw before we turned in last night.  If it seems that we are preoccupied with the weather it is because we are in closer contact with it when RVing than we are when we are at our house.  In the motorcoach we have to more actively manage our utilities to ensure they work properly and to maintain our comfort.

We had tea instead of coffee this morning.  Until about 15 years I did not drink coffee and enjoyed morning, afternoon, and evening tea.  Hot, of course; I have never been a big fan of iced tea and I have never developed a taste for iced coffee, unless it was a Starbucks Frappuccino (in my pre-vegan days).

Linda was finally feeling better and went for a long walk this morning.  Before she left I noticed that there wasn’t any water coming out of the bird fountain so she unplugged it and helped me partially disassemble it so I could clean it.  I ended up taking it completely apart, which was fun given that it was made of large slabs of granite, in order to get to the pump so I could clean it.  I was surprised to find a small gecko-like lizard inside the pedestal base.  Butch helped me reassemble and level the unit, allowing the reservoir to hold more water, and we got the outlet tube (fountain) tightened up so the water once again squirts about four inches above the tube.  It needs to be filled every day or two.  I have not determined if the water is being consumed by birds (there are a lot of doves and Gambrels Quail here) or evaporating (low humidity and sunshine).  It is probably a bit of both.

I worked on my article most of the day, inserting photos into the Word doc and writing captions.  I took a break mid-afternoon and rode into town with Butch.  We found the LED vendor where the hams (amateur radio operators) hang out but the booth was closed.  We wandered around looking at flea market junk and I found a set of four ratcheting tie down straps, 25mm wide by 15 feet long, for $5.  I had seen similar straps at another vendor for $14, so I bought the $5 set.  We stopped at Dorothy and Toto’s Ice Cream Parlor on west Main Street and bought some excellent kettle corn.

Back at the coach I continued working on my article but was having trouble keeping my eyes open so I took a nap.  Linda had started making dinner about the time I got up when a white SUV pulled in that we had not seen before.  A reddish-chocolate-brown dog appeared and took off after some of the rabbits followed by a man with a leash.  We figured Jim and Barbara, the owners of the third motorhome at our camp, had arrived so we put our shoes on and went out to meet them.  Jim got Roho on leash and Barbara appeared shortly thereafter, followed by Butch and then Fonda.  It was dusk and cooling off quickly, so the conversation was short before everyone returned to their motorhomes.  Before going in I turned the water off at the street and opened one of the faucets on our standpipe to relieve the pressure and let some of the water out.

For dinner Linda made skillet black beans with potatoes and tortillas.  Besides the title ingredients it had onions, garlic, poblano pepper, and salsa.  I added a little Tabasco Chipotle sauce to mine.  We each had a glass of sangria, which was refreshing with this hearty dish.  After dinner I finished working on my article and I uploaded it to the BCM folder in my Dropbox.  I sent an e-mail to the publisher, editor, and new administrative assistant.  I then started uploading the photo files and went to bed.

2014/12/29 (M) Cool Cruiser Redux

We had English Breakfast Tea to start our day, followed by store bought (bulk) granola for breakfast.  We have run out of Linda’s homemade granola and I really miss it.  The stuff we buy at the store just doesn’t taste like much of anything by comparison.  After breakfast I started working on my next article for BCM.  Actually, it was an article I wrote back in February of this year but had not quite finished.  Besides the text I had already selected the photos but, as often happens, I had not finished the process of putting them in order, sorting them into print edition and digital edition extra section, post-processing them, and inserting thumbnail versions into the Word document.  So that’s what I started working on this morning.

Late morning I took a break from the photo work and pulled the cover off of the dashboard to check the turbo boost gauge.  It was, indeed, a mechanical gauge with a very small nylon tube coming out the back of it.  I opened the Prevost CatBase Viewer and looked up the part, thinking I might order one today.  The specified part was a VDO gauge, 1/8-27 NPT, but did not give the mounting hole size, the, range, or the sweep degrees.  Both 24V and 12V bulbs were listed.  I think we need 24V.  What I found interesting was that the gauge for the VIP (conversion shell) was shown as “dummy,” which meant the unit was originally shipped with a filler plate rather than an actual gauge.  The turbo boost gauge in our coach is functional but is the wrong gauge for our engine. It’s a Sentry vacuum/boost gauge.  The vacuum side is useless on our turbocharged engine and the boost side only goes to 15 PSI, which is not high enough.

VDO makes two turbo boost gauges that should work as replacements.  Both are 2-1/16 (52mm) size, 0 – 30 PSI, 270 degree sweep, mechanical units.  They come with 12V bulbs but those are easily changed.  The differences are in the faceplate markings and the mounting systems.  The Cockpit Series gauge is marked in 1 PSI increments, which I prefer, but uses the traditional rear U-bracket to hold the instrument in the dashboard.  The Vision Series gauge, which is what our new speedometer is, has 2 PSI increments but mounts using a collar that threads onto the body of the instrument from the back side of the dashboard.  I was going to call Prevost and order a gauge but both gauges are available from PartDeal.com, which is run by ISSPRO.  ISSPRO sells their own line of gauges in addition to VDO and other brands.  I was chatting with Butch and he mentioned that they were closed for the holidays and would reopen on January 2nd, so I did not order a gauge today.

We left around noon and drove to the vendor area at Central Avenue and Kuehn Street.  We parked the car and wandered around checking out vendors who were not set up or open the last couple of times we were here.  While we were strolling I got a call from Frank Morrison.  Frank was at the Arcadia Bus Rally in Arcadia, Florida and wanted to know if we were there.  I photographed Frank’s bus, the Cool Cruiser, at last year’s rally and the article was the cover story in the June 2014 issue of Bus Conversion Magazine.  Frank said that in the welcome bag each attendee received there was a second bag from BCM and in that bag was the June 2014 issue.  Cool.  I wrote two other articles for BCM as a result of that rally.  The February 2014 issue was on the rally itself and the April 2014 issue featured the Iron Horse, an Eagle bus conversion.  Both articles ran in the cover/centerfold position.

For lunch we had chickpea salad on sourdough bread with dark greens and were surprised to see a Trek motorhome backing in to the property.  Jim and Barb obviously knew the people and helped them get parked.  Once they were in their site we went out and introduced ourselves, as did Butch and Fonda.  Jack and Maria were only here for the night.  They had been camped at the BLM Pyramid Lake LTVA, about 60 miles south of Quartzsite, but developed issues with their solar charger and a squealing/screeching noise when they start their engine.  They had appointments first thing in the morning to have these problems addressed and were planning on heading back to the desert tomorrow.  Barb mentioned that she had talked to Joe and Connie and Joe said we did not have to turn the water off at night.  One less chore is good by me.

Linda went for another power walk while I worked on my article.  I want to get my “almost finished” articles done and off to the magazine so I can work on some new pieces.  It’s easier on me and them if I can keep the pipeline flowing and stay ahead of them.

For dinner we had soy riblets with barbecue sauce, macaroni and cheese (gluten and dairy free), and fresh sautéed green beans.  The riblets were tasty, as always, and the green beans were excellent, but the mac & cheese was not good eats.  It was the second of two boxes we bought somewhere and Linda even added some things to try to improve them but it didn’t help.  We won’t be buying this product again.

Having spent a portion of the day processing photos I did not feel like doing more of that after dinner.  I played a few puzzles on my iPad while Linda played word games on hers with Karen and Ron.  We were in bed by a little after 9 PM and I went right to sleep.

2014/12/30 (T) Trash Day

Tuesday is trash day.  The collection truck comes at noon so the trash can has to be to the curb by 11AM.  I happened to glance outside as we were sitting down to enjoy our mourning tea and it was already at the curb.  Jim or Barb are responsible for this when they are here, along with maintaining the apartment and laundry room, and one of them had obviously taken it out.

Jack and Maria pulled out around 8:30 AM with Maria driving their Trek and Jack following in their SUV.  We figured we had seen the last if them and did not even get to say ‘goodbye’ so we were surprised when they returned an hour later and backed their motorhome back into their spot and leveled it.  They left in their car fairly soon thereafter and did not return until later in the day.

Linda went for her usual morning walk and I continued working on my Habitat For Humanity article for Bus Conversion Magazine.  Around 11:15 AM my Bluetooth mouse signaled that its battery was critically low and needed to be recharged.  I plugged it in and figured that was a good time to take a break and do something else.  Butch was outside with his tool bay open and Jim was out there with Roho so I went out and chatted for a while.  I needed to repair the connections on the front switch that controls the aisle lights so I borrowed Butch’s VOM, wire stripper, and terminal crimper and got three 1/4″ female crimp connectors from him.  I have all of these tools and supplies, but his were more convenient.

Being a 3-way circuit the switch has three wires.  It’s a double-pole double-throw switch so it had a second set of unused contacts.  I used the VOM to determine if the unused set of contacts worked as expected.  They did, so I removed the old connectors, one at a time, cut the wire loose from the connector, cut about an inch off of the end, crimped the new connector onto the wire, and pushed the connector onto the corresponding unused terminal.  I tested the circuit and I was able to turn it on and off from both switches.  (The other switch is in the control panel in the bedroom by my side of the bed).

My recollection is that the 3-way circuit feature did not work prior to this.  That could have been because the wire that broke off the other day was only attached by a few strands, or because of a failure in the switch on that set of contacts, or both.  The plastic insulated housings on the old connectors were very brittle and showed signs of heat damage, which could have occurred as the result of a very marginal connection.  When I tried to pull them off of the switch terminals they shattered.  I was also unable to pull the metal connectors off of the lugs and had to pry them open and then pry them off.  The first 1/2 inch of each wire was also discolored and brittle, indicating heat damage.  I did not bother to check the other set of switch contacts for correct function as the lugs also showed signs of heat damage and I do not plan to use them again.  In fact, I plan to replace the switch if/when I happen to find one or get around to ordering one.  The whole repair, including borrowing and returning tools, took less time to do than it took me to describe the work in this post.

Linda confirmed that our Fedex delivery was scheduled for today.  We have been rationing the cats’ food the last 48 hours and they are confused as to why.  They do not usually finish the dry kibble in their bowls but insist on having fresh kibble added each morning and evening.  To accommodate this expectation we have been adding very small quantities of fresh kibble to their bowls.  I don’t think cats can count, but they can definitely tell the difference between serving sizes of kibble and are not pleased at our puny offerings.

Jack and Maria returned sometime during the afternoon.  I saw them pull in but did not note the time.  We had sandwiches for lunch and then went for a walk.  We headed southwest from our campsite and worked our way over to Moon Mountain Avenue.  Our destination was the Salvation Army Store but we stopped to look at things along the way.  We checked out the Mountain Quail Cafe, but the only thing on their menu we could eat was the side salad.  Too bad, it looked like a cozy, comfortable place and the sign said they featured ‘home cooking.’  Well, not our home, of course.  ‘Home cooking’ is usually code for “everything is cooked in butter, we make liberal use of eggs and dairy, and treat bacon as a condiment.”

Moon Mountain Avenue between Main Street and Quail Trail seems to mostly be developments rather than individual lots.  We stopped at one place that had a lot for sale at the corner of Moon Mountain and the entrance road.  All of the lots were separated on three sides by the exact same low brick wall construction that we have seen all over town.  Some of the lots had the brick wall with a gate across the front.  As we were studying this lot the man across the street pulled out and drove over to see if we had any questions.  We really didn’t, but he answered them anyway.

It turned out that most of the developments on Moon Mountain Avenue were co-ops.  The price on this particular lot ($49,900) did not buy you a deed but rather a fractional ownership of the co-op with a lease for the perpetual use of that particular lot.  The price also included compensation to the current leaseholder for improvements to the lot, and whatever appreciation in value the market would bear.  You were free to sell your ownership share along with the leasehold for your lot, or will it to your children.  (This co-op, like many of the RV Parks in town, was a 55+ community, so it would be a long time before our “kids” could use it if they were interested, which I doubt.)  The annual maintenance fees for this co-op were $56/month ($672/year) and included water, sewer, property taxes, and association dues; everything except electricity.  Each site had its own billable electric meter.  The only added expense would be property taxes for improvements, such as a park model trailer or RV port.

We were glad we stopped and that this fellow was willing to share this information with us.  We suspect that many of the similar looking areas around town are probably also co-ops or even developments with deeded lots.  Every little thing we learn like this helps us develop a better understanding of Quartzsite.  BTW:  the Salvation Army store was closed.  We have walked or driven by at various times on different days and have yet to find it open for business.

When we got back to camp Linda needed a few things for dinner and thought the Road Runner Market might have them.  She grabbed Fonda and they took off in our car.  Butch was working on his HF mobile ham radio antenna on the roof of their bus and Barb was scurrying around the property taking care of things.  I was going to help Butch but got a phone call from Michele Henry of Phoenix Paint to discuss the spots on our roof and what to do about them.  Once we were done talking I was able to lend Butch some assistance with the antenna project which involved the installation of bonding (grounding) straps between the antenna and the roof of the bus.

The FedEx truck showed up before Linda and Fonda got back so I opened the box and unpacked the contents.  The kitties recognize Science Diet cat food bags and were very happy to see it.  I was opening the new coffee maker when Linda returned.  We got it unpacked and stored in the cubby where the old one was installed.  She had started cleaning and rearranging drawers before our walk so she finished putting everything away or set aside things she had decided she did not need to have on board.

I’ve been needing a haircut for a while and prevailed on Linda to take care of it while we still had sunlight.  After she was done I used the clippers to trim my beard and then put everything away.  Linda checked our log book and according to our records the last time we dumped our holding tanks was on the 20th.  We like them to be as full as possible before dumping, as they evacuate better but cannot let them overfill so we decided to dump them while it was still daylight.  Better safe than sorry.

I got another Hach SofChek water hardness test strip from Butch and checked the output of our water softener.  It measured 7 on a scale of 0 (soft) to 25 (very hard).  A reading of 7 is considered ‘hard’ water but the softener was still working somewhat as the water coming straight out of the tap measured 25.  We still had 1/3 tank of fresh water and I decided to add 1/6th of a tank, about 20 gallons, and bring it up to the 1/2 level.  I will have to recharge the water softener tomorrow before adding any more water to our tank.

I was able to finish editing photos while Linda prepared dinner.  She cut a large poblano pepper in half lengthwise and stuffed it with leftovers from two nights ago.  She also made Mexican rice from scratch using Texmati rice, onions, garlic, tomato sauce, cumin, and vegetable broth.  The peppers and rice were very good and went well with a glass of sangria.

Early this morning I thought I might finish my HFH article for BCM and be able to upload it this evening, but that did not happen.  I still needed to insert the thumbnails into the Word document and write the captions.  I was too tired to start that work, knowing how long that would take, so I played a few puzzle games and went to bed.

2014/12/31(W) Adios 2014

The polar outbreak that is gripping most of Canada and the U. S. A. has also made its presence felt here in Quartzsite.  The overnight low was 35 and we had light rain.  The high today won’t break 50, and the lows for the next two days are forecast to be in the upper 20s.  Not that far from us (~180 miles) Joshua Tree NP had a rare dusting of snow and the forecast for Flagstaff is for as much as 16 inches of holiday whiteness.  The temperature back home is in the teens, so we have no complaints about the weather in Q.

Linda went for a long morning walk and found the Salvation Army store open.  Apparently their hours are 8 AM to 1 PM Monday through Friday and we had managed to always walk past outside that time frame.  She picked up a few things from the Road Runner Market while she was out.  By the time she got back at 1 PM I had just finished inserting photos into my Habitat For Humanity article and captioning them so I had her proofread it.

With the proofreading done we had a bite of lunch and then drove to Blythe, California to pick up some grocery items that are not available here in Q.  We stopped first at the AutoZone store, in the northwest corner of the Albertson’s parking lot, and bought supplies for cleaning the bus.  Now all we need is a nice warm day so we can get out early and work at it until we are done.  We need to do the car, too.

We got a TXT message from our son while driving back to Q.  It was a short video of grand-daughter Madeline climbing into her car seat all by herself.  That led to an exchange of messages leading to the question from our daughter as to whether she could climb out by herself.  That question will apparently be answered tomorrow.  The growth from age one to age two is quite amazing.

When we got back to our coach I carried in the groceries.  While Linda put them away I added 30 gallons of water to our fresh water tank.  I really wanted to recharge the water softener first, and bought a 40 pound bag of solar salt at Albertson’s for that purpose, but it was too late in the afternoon and too cold to start that process.  I still need to fabricate the special perforated tube for the water filter housing, so it will take longer than a normal recharge.

We had some hot tea and cookies and relaxed for a while.  Linda finished proofreading my HFH article and I then went through it one more time to make sure it was ready to upload.  She also e-mailed Mara, one of the women who participated in the HFH build, to wish her a happy holiday and see what part of the country she was in at the moment.

Dinner was a simple, easy affair; a nice salad of fresh greens with other goodies mixed in and a couple of Asian noodle soup bowls.  Sometimes Linda does not feel like cooking and we keep a certain amount of packaged convenience food on board for such occasions.

It has been our tradition since we started dating in high school to stay up and celebrate the coming of the New Year.  We rang in three calendar changes while dating and have observed 42 more since getting married.  Tonight was number 43.  For all of that time we have rarely gone out on New Year’s Eve, preferring to stay close to home and off the streets.  Besides, large, loud parties have never been our style, especially since I do not dance.

When we were dating, and in the early years of our marriage, we would spend the holidays in the St. Louis, Missouri area visiting family.  My parents hosted a New Year’s Eve party that, in retrospect, was quite a large and well-attended event, and that is where we hung out, often joined by a few friends from our high school days.  As we attained legal age a champagne toast became part of the tradition (although in the privacy and safety of my parents’ home we probably started this tradition a bit sooner).

As our children came into the picture we still traveled to St. Louis but when they got a bit older we started spending our holidays at home.  Linda’s sister, Marilyn, started visiting us between Christmas and New Year’s and the tradition of assembling a 1,000 piece jigsaw puzzle on New Year’s Eve began.  Linda usually did not cook a New Year’s Eve meal.  Instead we had California Dip (made from Lipton’s Onion Soup mix) and chips, jumbo shrimp with cocktail sauce, smoked salmon, and other munchies that we nibbled on throughout the day.  This was, of course, all pre-vegan.  Starting around 11 PM we would turn the TV to one of the networks doing the countdown from Times Square in New York City.  I think it was ABC as we usually watched Dick Clark.  At 11:55 PM we would open a bottle of champagne and fill our glasses.  When the ball dropped and the clock struck 12 we would toast the New Year.

Since our children became adults they have spent New Year’s Eve with their friends and families.  Besides Marilyn we have had occasional guests at our house but more often it has been a quiet evening at home with just the two or three of us and we often went to bed shortly after the arrival of the New Year.  The last two years have been unusual in that we moved to a different house in 2013 but have never celebrated New Year’s there.  Given that we plan to do most of our extended RVing from mid-fall to mid-spring it may be quite (if ever) before we celebrate New Year’s at the new house.

For the 2013-to-2014 change we were at the Arcadia Bus Rally in Arcadia, Florida where we attended a party with 200 other people and a live band.  We spent much of the evening outside where the volume was about right and the temperatures were pleasant.  This year we are camped on private property in Quartzsite with three other couples, none of whom seemed interested in staying up until midnight, so we toasted the New Year in the privacy of our coach three times before going to bed.  We are unable to receive OTA TV signals here, so we watched (listened to) the ball drop in Times Square on Linda’s iPad (at 10 PM MST) and shared a champagne toast.  She then sent TXT messages to both of our children.  At 11 PM MST we shared another champagne toast.  I sent a TXT message to my sister and niece while Linda sent one to her sister, all of whom live near St. Louis, Missouri in the Central Time Zone.  At our local midnight we shared our final toast and welcomed the New Year in the Mountain Time Zone.  If we had been so inclined we could have driven to Blythe, California, returning temporarily to 2014, and celebrated the coming of the New Year in the Pacific Time Zone.  But we didn’t.  That kind of thing is more fun to “brag” about than it actually is to do.

Before turning in for the night I updated my article status spreadsheet and then uploaded it to the BCM folder in my Dropbox along with the HFH article and associated photos.  I then e-mailed the team at BCM to let them know it was there and wished them a Happy New Year.  I also e-mailed a link to a PDF version of the article to Steven Gullette, our team leader on the HFH build that was the main focus of the article, and wished him a Happy New Year as well.  So endith another year.  Adios 2014.

 

2014/12/21-25 (N-R) The Holidays Arrive

2014/12/21 (N) Winter Solstice

Linda was reading an interesting tidbit online this morning about the winter solstice, which occurs today in the northern hemisphere.  It usually occurs on the 21st, like today, but occasionally slips into the 22nd.  While it is the day of the year with the least hours of sunlight (between sun up to sun down) it is not the day with the latest sunrise (which occurred a couple of weeks ago) or the earliest sunset (which does not occur for a couple of more weeks).  Why is that?  Axial tilt, elliptical orbits, and a “day” that is not exactly 24 hours.  Science is fun.

Today was a stay-at-home / stay-in-town day for us.  Linda vacuumed the coach and mopped the floor tiles.  She says she likes to do this once a week to keep the cat hair under control.  By “likes” I think she means “needs.”  She also decided to do the laundry.  When we are at our house the laundry is usually my chore but for some reason, to which I am not privy, she takes over this chore when we are living in the RV, at least initially.  The same thing happened last year at Williston Crossings RV Resort, although we eventually both did laundry until I was able to win back my rightful chore.  So far again this year it has been her self-selected task here at Quartzsite and I have not gone out of my way to reclaim my rightful place as master of the laundry.

What I did instead of laundry was spend the morning finishing our 2014 Year-in-Review holiday letter.  Linda proof read it and then I converted it to PDF and did a final check of the layout to make sure the text and photos had not shifted or been clipped.  I copied it to a flash drive so we can take it someplace in Blythe tomorrow and have it printed.

The other day I noticed that the manifold pressure sensor (turbo boost) on Butch and Fonda’s 6v92 was mounted vertically on the front passenger side of the ECM.  I could not see exactly how it was mounted, however, so today I finally looked it up in the DD 92 Series manual.  I did not attempt to reattach our sensor module today but I was curious to see what would be involved.  I also continued to interact with other Prevost owners on the Prevost Community forum regarding the turbo boost issues and the dashboard gauge, which does not have the correct scale for our engine.  That thread has led to a dialogue about the SilverLeaf systems, including the VMSpc that we have, and an alternative system from RV Tech Tools that uses an iPad app named “RV Dash” and a wireless (WiFi) interface named “CANpod” from Cubix Labs.

With our various chores done we had a light lunch of chickpea salad on a bed of mixed greens and then went for a long walk.  The walk took us down Washington Ave. and then over to Kitsap Ave. to see a gorgeous Adobe house that Linda had discovered on a previous walk.  That led us to the backside of the west-central “vendor” (flea market) area on the north side of Main St.  We are not collectors, and we are not into antiques, guns, rocks, jewelry, or junk, so we saw very little that interested us.  We did see a few pieces of Pyrex, which our daughter and son-in-law were collecting at one time, and I am always on the lookout for a good deal on a tool I can’t live without, but mostly we saw endless quantities of stuff that we could not fathom anyone buying.

We crossed Main Street and visited the Tyson’s Well Stagecoach Stop Museum.  The grounds and building were open, admission was free, and it was unattended.  There were items for sale and if we had wanted something we would have put the money in the collection box.  That’s small town.

We headed east on Main Street and crossed back to the north side using the crosswalk at AZ-95 (Central Ave.).  We then continued east and stopped at the Road Runner Market.  We were pleased to find that they had a small but good selection of fresh produce.  On our way out the door the florist gave Linda a red and white carnation.  We will definitely be doing some of our local grocery shopping there.  We knew there was a restaurant/bakery on the far east end of Main Street so we kept on walking.  Sweet Darlene’s looked like a nice local place for a home-cooked style meal, but did not have anything on the menu we could eat.  The bakery turned out to be a small display case with pies and sweet rolls, but they did not make their own bread, so we won’t have any reason to come back.

By this time it was getting to be late afternoon, the cloud layer had thickened, and it was getting a bit chilly so we headed back towards Central Avenue.  We counted laundromats along the way, and passed at least four before getting back to our coach.  Not that we need a laundromat—we have a laundry where we are staying—but with all of the boondockers in and around Q it is a matter of some curiosity to us how/where they take care of things like this.  By the time we got back to our coach we had walked just over five miles.

Sunset over the Dome Rock Mountains due west of our encampment.

Sunset over the Dome Rock Mountains due west of our encampment.

By 5:15 PM the sun had slipped just below the mountains to our southwest and the sky started to glow pink for 360 degrees around us.  The sunset went on for over 30 minutes, the pinks deepening to reds.  And then, just like that, the color was gone and darkness enveloped the valley.

For dinner Linda made a simple green salad with raisins and peanuts.  She then heated up some vegan re-fried beans, pan-grilled a package of fajita vegetables she got from Connie before they left, and then heated two tortillas.  We each made a tasty roll up, adding some salsa and vegan sour cream.  She washed some black seedless grapes and set them out for desert.  They were very refreshing after the somewhat heavier and spicy main course.

2024/12/22 (M) Compressed

We had planned on driving to Blythe, California today but those plans changed fairly early in the morning.  Butch got an update that his air-compressor was on a UPS truck in Blythe and scheduled for delivery today.  I had promised to help him with the installation and provide a few tools he did not have with him so we decided to stick around camp.  We were also waiting for Connie’s realtor, Carolyn, to come by and pick up two yellow Post Office slips.

Linda took her morning walk after breakfast while I downloaded the October and November issues of Bus Conversion Magazine in both standard- and high-definition.  I was really glad to finally see these issues.  The October issue included my article on our T. F. Hudgins Spinner II Centrifugal By-pass Oil Cleaner project.  That was my one remaining article waiting to be published.  I have at least a half dozen in process, at least that many more for which I have taken photos (and written blog posts), and a very long list of future projects, so it’s time to get the next batch of articles ready to submit.

When Linda got back I drove to the print/copy/fax/pack/ship/etc. store on east Main Street to see if they could print our holiday letter.  They had plain 8.5×14 white paper, and the photos looked OK, but it was going to cost $4 per letter ($2/side) so I paid for the one copy and left.  They suggested that I try Weeks Printing in Blythe (20 miles west) or Staples in Lake Havasu City (70+ miles north).  Since we will likely head to Blythe tomorrow we will check out Weeks first.

As long as I was out I stopped at Barry’s Breads and bought a couple of fresh “rolls” which were really small loaves of bread.  Barry runs a little seasonal bakery out of a temporary vendor stand on the northeast corner of Central Avenue (US-95) and Kuehn Street.  Most of his products have butter or cream cheese as ingredients—his Danish pastries are as big around as a dinner plate—but he does make just plain bread and everything is made fresh daily.  Back in camp Linda called Weeks Printing and they quoted $1.25 for each 2-sided letter.  Much better.  We will check them out when we make it to Blythe; probably tomorrow.

For lunch Linda made a batch of her scrumptious chickpea salad/spread and served it on one of the rolls I bought at Barry’s.  After a week of cloudy skies, cool temperatures, and a little rain we finally had a day with clear, sunny skies and the high temperature up into the 70s.  Butch decided to remove his defective air-compressor and there wasn’t anything we could do to help (or stop him) so we decided to clean some more of our coach exterior.  I wanted to work from the top down, which meant starting with the roof.  That, in turn, meant getting out the Little Giant convertible extension/step ladder and setting it up as a 14 foot extension ladder.  In this configuration it extends beyond the top edge of the roof at the front, making it safer for me to get up on the lower roof area from the driver’s side.

Rinsing down the roof of the coach (photo by Linda).

Rinsing down the roof of the coach (photo by Linda).

The roof was very dirty and it appeared that we might have more than just embedded dirt to deal with.  The roof has a sprayed-on ceramic-infused white coating with a surface akin to medium grit sandpaper.  It reflects sunlight and provides a nice nap for walking on, but also traps dirt.  The last time the roof was cleaned was in early April, just before we left Williston Crossings RV Resort.  I had been on the roof subsequent to that, in our pull-through driveway at home, using it as a platform for trimming tree limbs.  I do not recall it being unusually dirty at that time, but I was focused on other things.  If it had been, I probably would have washed it, but maybe not; I was focused on other things.

I used a little bit of Dawn dish soap in several gallons of water and our soft, long handle, brush to try and scrub it clean and then rinsed it with softened water.  It was better by the time I was done but far from 100% clean.  I also scrubbed all of the metal awning covers and then hosed them off and rinsed the awning fabric.  When I was done on the roof I sprayed off all four sides of the bus, but even with the softened water it left spots and streaks.  Another unfortunate side effect of this work is that it frightened our male cat, Jasper, who ended up hiding behind the steering column in an attempt to escape the sights and sounds of a ‘monster’ on the roof.

We would like to get the body clean but there’s no point doing anything until I get the roof finished (Linda does not climb ladders and she does not get on the roof of the bus.)  At a minimum I am going to have to use a stiff scrub brush and a stronger solution of Dawn dish soap, or perhaps a commercial cleaner that can treat mold/mildew along with just plain dirt.  We will then have to do the vertical surfaces in small sections, scrubbing, rinsing, and drying as we go.  We have a sprayer for our hose that has a small bottle for additives and one of the reasons I bought it was to try using a dishwasher rinse aid, like Jet Dry, to see if it would eliminate spotting.  To-date, however, I have not tried that.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda's MC-9.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda’s MC-9.  The governor is the silver thing on the left.  The open port on top is the air discharge where the unloader valves are located.

Once Butch had the old air-compressor out of their bus he turned the input shaft and noted that the pistons were not pumping air.  This confirmed that something had failed internally and ordering a replacement was the right thing to do.  There wasn’t much else to do so we all sat around in the warm sun and waited for the UPS truck to show up, which it finally did around 3:45 PM.  We (me, Linda, and Fonda) suggested that Butch wait until tomorrow to start installing it, but we knew that was not going to happen.  The compressor was a significant road failure that had bugged him since it happened and he was anxious to get it fixed.

 

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The Bendix Tu-Flo 700 he received is designed specifically for mounting on Detroit Diesel 92 series 2-stroke engines but has more ports on it than are typically used in this application.  Making sure to match the configuration of the old compressor, Butch installed new plugs in the unneeded ports.  He then removed the fittings from the old unit one at a time and installed them in the new one, being careful to line them up exactly the same way.  I helped by holding the compressor on a work table while Butch tightened the pipe threads.  This was the easy part of the project as we were standing at a tall bench with plenty of room to work and good light.

 

The new air-compressor with fittings.  Note the alignment marks for orienting the fittings correctly.

The new air-compressor with fittings. Note the alignment marks for orienting the fittings correctly.  The spline is in the upper left of the photo.

The hard part was getting the air-compressor re-installed.  Butch eventually got it onto two of the four mounting studs, which then took the weight.  We discovered a clearance issue with one of the port plugs and he had to pull the compressor back out.  He removed a plug from the old compressor, which did not stick out as far, and reused it in the new compressor.  With the compressor back on the studs it now lined up better but the spline would not engage the drive gear on the end of the engine camshaft.  He put a wrench on the crankshaft pulley nut and turned the engine slightly by standing on the end of it while I jiggled the air-compressor.

The "governor" mounted on the new compressor.

The “governor” mounted on the new compressor.

The spline eventually engaged the engine gear and the air-compressor gear enough that Butch was able to fully seat the flange and insert/tighten the four mounting studs, lock washers, and nuts.  Per the instructions, he reconnected all of the lines except for the air discharge and called it a night.  The coolant goes back in tomorrow and Butch will then start the main engine to make sure the compressor works, check for leaks, and let any contaminants get blown out the discharge fitting.  If everything looks good he will attach the discharge line, which connects the outlet port of the air-compressor to the coach air system, and air up the bus.

The new air-compressor (blue) mounted on the rear of the engine block (towards the front of the bus).

The new air-compressor (blue) mounted on the rear of the DD6V92TA engine block (towards the front of the bus) in Butch and Fonda’s MCI MC-9B NJT.

At least we were successful in convincing Butch to wait until tomorrow to put the coolant back in the engine.  By the time we finished working, put our tools away, and got cleaned up it was 7:30 PM and had been dark for two hours.  Linda reheated the leftover fajita fixings and we had open-faced tortillas with Fritos corn chips, salsa, black grapes, and Sangria.  We were both tired so we relaxed for a while after dinner and then went to bed.

2024/12/23 (T) Blythe, CA

We got a call from Connie right after breakfast letting us know that the two packages Carolyn picked up yesterday were for us and Butch.  We needed to pick them up before 11AM as Carolyn had an appointment at that time.  Linda was headed out for her morning walk anyway so she walked to Rock Reality, near the post office and uptown drugs, to get the packages from Carolyn.  (Carolyn is Joe and Connie’s realtor.)  She dropped off the two P. O. Box – Mail Pickup Notice cards at the post office while she was there.

Our package was from Madeline (Brendan and Shawna), to be opened on Christmas Day.  Butch’s package was the unloader valve kits for our Bendix Tu-Flo 700 air-compressors.  He ordered them while we were in Forest City, Arkansas for delivery to Amarillo, Texas but they did not arrive in time so his friend forwarded them to our Quartzsite location.

Butch and Fonda used most of the morning to put the coolant back into the engine.  Our buses, which still have their over-the-road heating systems, hold a lot of coolant.  Ours requires 34 gallons.  The buses are not identical, but I suspect theirs requires at least 30 gallons.  And it is very important that the cooling system is filled to capacity and has had all of the air purged out of it.  It’s a big, messy job.

They got as much in as they could by standing on a ladder and pouring it through a funnel into the filler tube for the surge tank.  The radiators on the MCI MC-9 are located above the engine, one on each side wall at the rear of the bus, and the surge tank is located above them, so the filler tube is approximately 9 feet from the ground.  Butch started the engine to warm it up enough for the thermostat to open and to circulate the coolant and opened a couple of bleeder valves to let air out.  He also checked the outlet fitting on the new air-compressor to verify that it was pumping air.  It was (hurray!), so he shut the engine off, attached the air line to the outlet fitting, and started it back up.  The chassis air system (suspension and brakes) came up to pressure and the air-dryer “sneezed” (momentarily opened its purge valve) so the system was fully operational.

We planned to go to Blythe, California today and Butch and Fonda wanted to go too, so he shut off the engine and they cleaned up their campsite.  We were sitting in our coach when the winds came up rather strong.  Linda checked the weather and the winds were out of the north at 20 MPH and forecast at 22-25 MPH until 6 PM.  That was strong enough for us to retract our awnings, close our roof vents, collapse our folding chairs, and stow our patio mat.  Butch and Fonda also retracted their patio awning and stored all of their outdoor equipment and furniture.  We had the old patio awning on our Itasca Sunrise torn off by strong (thunderstorm) winds while we were away from the motorhome and have been extra careful about awnings and wind ever since.

With all of that done we headed to Blythe in their Chevy Suburban.  From 879 feet ASL in Q we climbed to about 1200 feet ASL over the low mountain range that separates the two valleys, and then descended to 240 feet ASL as we crossed the Colorado River and entered California.  A few miles later we took the 7th Street exit and we were there.  The 20 mile drive was only five more miles than the trip we made from Williston Crossings RV Resort to the Publix grocery store (at the southwest corner of Gainesville, Florida) last winter, so it did not feel like a long way to go for groceries.  At home we have supermarkets about five miles away in three different directions.  Butch and Fonda typically drive into Logansport for their groceries, a distance of 12 miles, so we are all used to traveling some distance to purchase our food.

The Smart & Final Extra and the Albertson’s were on the NW and SE corners of 7th and Hobsonway, just north of I-10, making them especially convenient for us, so this is where we will likely shop every other week or so.  But our first destination was a few blocks farther west on S. Main St. where we found Weeks Printing.  They were eventually able to access our flash drive and open the PDF of our holiday letter.  They had a high quality paper in 8.5”x14” size, and were able to print our letter 2-sided on a good quality color laser printer for a very reasonable price of $1.25 per letter ($0.625 per side).  They did not take credit cards so we paid cash, but it saved us a 73 mile trip (one way) to Staples in Lake Havasu City.

Self-portrait of the blogger.  I am merely a reflection of my former self.

Self-portrait of the blogger. I am merely a reflection of my former self.

At the Smart & Final Extra we bought fresh produce, soy milk, and some bulk, canned, and packaged items.  They did not carry the Silk brand soy coffee creamer that I like, and there were a few items Butch and Fonda needed that the store did not have, so we drove across the street to Albertson’s and got those items.  I stayed in the car with the groceries, but I already knew that the Albertson’s would be a nice store based on our experience with the chain in Sheridan, Wyoming during summer 2013.  With our shopping done we returned to Quartzsite.

I carried the groceries from the car to the bus and Linda stored them, discovering that she had an empty tub available in the cabinet above the refrigerator.  By the time she was done it was approaching 4 PM so she prepared chickpea salad sandwiches as a quick, light lunch and then announced that we should go for a walk before it got dark.  She let me chose the route so we crossed Central Avenue (AZ-95) and walked to the city park, which has a very nice baseball field with lights and the only grass we have seen in Quartzsite.  There was also a skateboard facility, a football field, and two F4 Phantom jets (minus the engines and other equipment).  The Quartzsite Metal Detecting Club (QMDC) has a practice field adjacent to the park.  The park is located near the following municipal facilities:  Community Center and Library, County Court, Police Station, and Post Office Annex (where most of the P. O. Boxes are located).  The Fire Department is a little farther north on Tyson Wells Street just east of Central Avenue.

The sun was getting near the tops of the mountains to our southwest so we headed pack to our coach and settled in for the evening.  For dinner Linda made a barley risotto with garlic, shallots, mushrooms, sun-dried tomatoes, vegetable both, and seasonings.  While she was cooking I got a call from my dad and got him caught up on our whereabouts and activities.  The risotto was excellent and we each enjoyed a glass of sangria with our meal.

I don’t know if we are just relaxed, or really tired after a hard summer and fall, but we have both been going to bed earlier and waking up later than usual.  Or perhaps it is just the effect of fresh air and sunshine.  Whatever the reason, it’s nice to be able to just sleep when that is what we feel like doing and get up when we are read.

We have an excellent Verizon signal here in Q.  Linda often likes to pace up and down Lollipop Lane while talking on the phone.  If you lived on Lollipop Lane you would too.

We have an excellent Verizon signal here in Q. Linda often likes to pace up and down Lollipop Lane while talking on the phone. If you lived on Lollipop Lane you would too.

2014/12/24 (W) Christmas Eve

It’s Christmas Eve and we woke to a temperature of 37 degrees, clear skies, light winds, and no snow.  The forecast high for today was 66, with no snow.  Do I miss snow at the holidays?  Not really.  At one time (high school) I considered myself something of a “romantic” in the sense that I liked the classical music of the romantic era, but I am not particularly nostalgia.  If I was, we would own a restored 1957 Chevy; red, of course.  No, we had snow at home before we left and as a harbinger of things to come we took it as a sign that our departure was overdue.  Christmas in the desert will be a new experience for us, but so far it looks very agreeable.  We will miss being with family, of course, but we are not alone here and technology keeps all of us much more connected than it once did.

Having been to Blythe yesterday we did not have any last minute shopping to do today.  The desert was there yesterday and will be there tomorrow (I presume) so we did not have to see it today.  With the holidays upon us I did not feel like working on bus projects.  Linda started addressing the envelopes for our Year-In-Review Holiday Letter and then worked on food preparations for tomorrow’s dinner with Butch and Fonda.  It seemed like a good day for me to finally start catching up on some things that I have not had time for in a while.  For instance, I need to work on articles for Bus Conversions Magazine, update our bus project list/status, update our website, upload some blog posts (OK, a LOT of blog posts), and catch up on the blogs I follow using the Feedly app on my iPad.  I am way behind on all of these tasks and starting to feel some pressure about it, albeit self-imposed.  I do not have to do any of these things if I don’t want to, of course, but they are activities that I enjoy and want to do.  Still, being way behind takes some of the fun out of it and makes it a bit more like work.  I won’t get caught up in one day or one week or even one month; it will take many weeks of persistent effort.

After checking e-mail, I settled in to work on my article about the exterior renovation of our motorcoach.  Michele Henry of Phoenix Paint helped me finish the article in early October but I still needed to select and caption all of the photos.  While I worked on that Linda walked to the Road Runner Market and managed to snag the last 3-pack of yeast.  When she got back she made her orange cranberry relish for tomorrow’s dinner.

We took a break for lunch and then Linda headed out for her daily power walk.  When she got back she continued addressing envelopes for our holiday letter.  Just as I was feeling like I needed a break, Butch knocked on the door to let me know he was working on a small project that might interest me.  He had already burped the coolant lines that supply heat to the living area of their bus when driving and gotten the last of the coolant into the system.  His new project was getting an alternator driven tachometer connected and calibrated.

It turned out that he needed positive DC power to the tachometer in addition to the ground and RPM signal.  He was able to temporarily pick up 24VDC from the positive terminal of the starter, found a convenient ground point, and picked up the rotational speed from the stator terminal on the back of the alternator.  With the engine running at low idle he measured the RPM of the main crankshaft pulley using an optical sensor instrument.  It was just over 600 RPMs so he adjusted the tach via a set screw on the rear to match the reading.  He kicked it into high idle and measured the rotational speed as 950 RPM.  That is what the tach displayed within the precision of the markings.  He already has a signal wire run from the engine compartment to the cockpit but needs to mount the tachometer in a separate bullet housing, connect the wire on both ends, and provide positive and negative (ground) DC to the instrument.  He decided not to take on that project today.

(Note:  RPM is universally understood to be an abbreviation for “Revolutions Per Minute” but that is not necessarily correct.  An object such as the pulley on the end of an engine crankshaft rotates about its own axis, just as the earth does, and has angular velocity which is properly measured in rotations per some unit of time or angular displacement per some unit of time.  The abbreviation is, of course, still RPM.  In the case of the pulley, however, Butch put a small piece of white tape on the face of the pulley at the outside edge to act as a target for his optical sensor.  If we consider the piece of tape as a separate object then it does, indeed, revolve around the center axis of the pulley, just as the earth revolves around the sun.  Viewed thus way, revolutions per minute is technically correct.  As with many things in physics, it depends on your frame of reference.  So much for today’s physics lesson.)

This building houses (L-2-R) the laundry room, the apartment, and a small workshop.

This building houses (L-2-R) the laundry room, the apartment, and a small workshop at our compound.

As long as I was outside I borrowed Butch’s metal detector and went in search of a couple of tie downs that Joe told us were buried somewhere near the outer edge of our patio awning.  I knew they were lined up with a reference mark on one of the concrete patio slabs and it did not take long to locate and uncover them.  We put a couple of medium-sized rocks on top of them so we could relocate them easily.

We got several multimedia messages from our son today with pictures of our grand-daughter at our daughter’s house helping make cookies.  Brendan, Shawna, and Madeline are spending the night and Katie is joining them tomorrow.  Butch and Fonda will spend most of the day at the local church Fonda selected, including a carry-in (pot luck) luncheon, but will have dinner with us around 6:30 PM.

I finally returned to our coach and worked on my article about the Zena power generating system I installed to charge our house batteries while driving.  Again, the article was mostly finished a long time ago, but I could not submit it until I completed the installation, got the system operational, and took a few more photos.  All of that happened in October and November but I was too busy with other projects and preparations to pull it all together at that time.  I had a couple of e-mails today from Gary, the publisher of Bus Conversion Magazine, indicating that the December 2014 issue might not be out until early January 2015, and wondering if I might have a finished article they could use.

For dinner Linda made a salad of dark mixed greens with raisins, nuts, and pear slices drizzled with raspberry walnut vinaigrette dressing followed by pan-seared tofu slices with caramelized onions and bar-b-que sauce served open-faced on hamburger buns.  We split a Sam Adams Pumpkin Spice Ale.  I am not a big fan of ales or pumpkin but beer seemed like the right beverage for this dish.  It was OK, but I would have enjoyed a Yingling or Shiner Bock more.

I made good progress on both articles today.  I got an e-mail from Mike, the editor of BCM, wondering if I had a finished article.  The ZENA article was close enough that I decided to finish it and upload it to our Dropbox before going to bed.  I e-mailed Mike back to let him known it was there and offered to finish the other one by the end of the weekend.

Earlier in the day I updated our personal WordPress site to the just released version 4.1 and updated several plug-ins and themes.  My last task before turning in for the night was to replicate the update process on the other three sites I manage.  By the time I got to bed it was Christmas Day.

2014/12/25 (R) Christmas in Q

The wind came up strongly overnight and we were awakened by the rattling of the vent fan domes.  From our north facing bedroom window we could see flags and the tops of trees blowing briskly in the wind.  We could also hear and see the awnings on the south/passenger side of the coach flapping.  Linda checked the weather channel app on her iPad and it reported winds at 20 MPH.  We were not expecting winds that strong until the daytime and they were strong enough for us to be concerned about our awnings.  By that point we were wide awake so we put on our sweatpants and shirts, slipped on some shoes, found a set of keys, got the step-stool out of the front bay and the awning rod out of the folding chair bay, retracted the two awnings, returned the rod and step-stool to their respective storage compartments, and finally went back to bed.

Linda got up at 6:30 AM in order to start making cinnamon rolls from scratch.  I usually get up first and make a pot of coffee but I was up past midnight working, so I slept in for another hour.  The yeast she bought yesterday wasn’t cooperating so we turned on one of the Broan ceramic cube heaters to try and create a warmer and more consistent environment to get the dough to rise.

We borrowed Butch and Fonda’s Verizon MiFi (unlimited data plan) so we could Facetime with our children and their families, who were gathered at our daughter and son-in-law’s house.  We got to watch all of them open the presents we left for them when we were there on Thanksgiving and they got to watch us open the gifts they sent with us or shipped to us here in Quartzsite.

Brendan, Shawna, and Madeline (son, daughter-in-law, and grand-daughter) sent a 2015 Shutterfly Calendar with photographs of all the different family members placed on the dates for birthdays, anniversaries, and such.  We do not need much at this point in our lives, but a collection of photographs that also reminds us of the people and dates that are most important to us is something we appreciate and treasure.  Meghan and Chris (daughter and son-in-law) bought us each a genuine Tilley hat.  I have known about these hats for a while but never bought one.  Given our outdoor oriented RV lifestyle, these were excellent gifts.

After we were done with our Facetime session Linda took the cinnamon rolls over to the apartment to bake since it has a range with an oven.  She will finish cooking dinner there later and the four of us will eat there this evening as it has a table that will seat four people.

The apartment bedroom.

The apartment bedroom.

In spite of early indications to the contrary the cinnamon rolls rose and baked just fine. The dough used flour, salt, vegan butter, yeast, and flax meal with water (egg substitute) and a little sugar.  The filling was made with brown sugar, vegan butter, cinnamon, and maple syrup.  The topping was a glaze of sugar, water, and vanilla with raisins and chopped walnuts.  Linda took two of them over to Butch and Fonda and we had some for breakfast still warm from the oven.  It’s a good thing that these are as much work to make as they are or I might want them for breakfast every day.   🙂

Linda had a call and TXT message from her sister (Marilyn) and sent a reply.  She was on her way to her housemate’s family gathering and they agreed they would talk later today.  She also sent merry Christmas TXT messages to her sister-in-law, Mary, and good friend, Diane.  At noon our time (1 PM CST, UTC-6) I called my sister to wish her a happy holiday.  Her daughter, grand-daughter, and future son-in-law had already been there in the morning as Ryan had to work that afternoon.

I made a second pot of coffee, which is unusual for us, but we planned to spend the day lounging around the coach cooking (Linda) and working on the computer (me).  Linda cleaned up the breakfast cookware, poured another cup of coffee, and started working on the chocolate cake for tonight’s dessert.  With the cake prepared and in the apartment oven she turned her attention to making the candied yams.  Once those were done the only thing left to do was bake the Tofurkey, roast the asparagus, and heat the gravy.  It was a lot work for her but it was spread out over two days and she enjoyed, and did it, willingly.  We could have gone out for dinner if she wanted, even though we would not have found much we could eat, but I am glad she preferred to cook.

Once I wrapped up the conversation with my sister I got back to work on the Outside Makeover (Exterior Renovation) article.  Although I thought I was done writing I made a few more edits and selected additional photos.  By 5 PM I had 74 photos selected and placed in sequence to match the flow of the article.  I had also done as much of that work as I cared to for the day.

We were down to 1/4 tank of fresh water so I decided to refill it.  About that same time Linda decided it was chilly enough in the apartment that she wanted the propane space heater turned on so I shut off the water and took care of that.  The heater had a hose that went through the wall at floor level to the outside with a regulator and POL fitting on the end of it.  I found a couple of 20 lb. propane tanks in the workshop and connected one of them to the regulator.  It took a while but I eventually got the pilot flame to light and then got the heater to ignite.  I then went back and finished filling our water tank.

The little apartment is very cute with three rooms: a bathroom on the east end, a bedroom on the west end, and a kitchen/dining/living room in the middle.  It has a shower, a 4-burner electric range with an oven, a refrigerator/freezer, a small microwave oven, the aforementioned space heater, a small window air-conditioner, a small TV/monitor with a satellite receiver, two easy chairs, a small dining table with four chairs, and a queen sized bed.  Marilyn is seriously considering coming for a visit the last week of January and if she does she will stay in the apartment and get to experience Quartzsite.

Linda starting to set the table in the apartment for Christmas dinner.  No pictures of Butch & Fonda (they are camera shy).

Linda starting to set the table in the apartment for Christmas dinner. No pictures of Butch & Fonda (they are camera shy).

We bought a bottle of Sternthaler Nurnberger Christkindles Gluhwein spiced red holiday wine at Central Market in Fort Worth, Texas to serve with our Christmas dinner.  It is a mulled wine that is supposed to be gently heated before serving, but we found it quite agreeable straight from the refrigerator.  About 20 minutes before dinner time we set it out on the counter to warm up slightly, the space heater doing a very effective job heating the small apartment even on its lowest setting.

Linda and Fonda both contributed dishes to the meal and Fonda made a couple of things that we could eat.  They brought chicken and traditional mashed potatoes for themselves but also tried some of the Tofurkey roast.  Linda made a vegan chocolate cake for dessert and whipped refrigerated coconut milk solids to use as a whipped cream substitute.  Our daughter did this for the Thanksgiving meal and we really liked it.

We sat in the apartment for a long time after dinner and just talked until we were all tired.  Linda and Fonda had already cleaned the dishes so we turned off the propane space heater and carried all of our stuff back to our coaches.  Linda put the leftovers away while I did a final check of my e-mail for the night.  I then shut my computer off and we headed to bed.  Like so many things in our retirement RV lifestyle, this Christmas holiday was a new and good experience.

 

2014/11/03-09 A Week at Home

Note:  There are no photographs for this consolidated post.  Sorry.  🙁

2014/11/03 (M) Getting Ready

Linda was up early and off to the bakery.  I got up an hour later and had some raisin toast for breakfast.  Whenever I have had time since I got home on Friday I have been working on the project list for our bus.  I worked on it some more this morning but eventually had to set it aside while I made some phone calls, tried to deal with an issue with Linda’s Samsung laptop computer, and got documents ready to upload to my Dropbox for a meeting on Wednesday afternoon.

I called Bill Jensen, the national service advisor for conversion shells at Prevost Car Inc., but his voice message said he was unavailable indefinitely and gave alternate contact info.  The main contact was Kevin Laughlin so I called him.  I described the shorter ride height linkage and the downward pointing position of the ride height valve lever arm in its neutral position.  He agreed that neither of these seemed right.

I called Prevost and ordered a new ride height valve and two CX-96 (Gates) drive belts for the OTR air-conditioning compressor.  I then called Martin Diesel in Defiance, Ohio and made an appointment to have the diesel generator in our coach serviced on the 20th and 21st if needed.  I also needed to call Webasto technical support but did not get that call made today; maybe on Wednesday (or Thursday).

Linda’s Samsung laptop suddenly decided to turn the screen brightness down and she has not been able to turn it back up.  It’s bright enough to see in somewhat dim conditions, but still uncomfortably dim for general office use.  I did a Google search and found that lots of other folks had encountered the same problem and had advice on how to fix it.  I shared several links with Linda but she could not get it to work.

I put the finishing touches on the FMCA Freethinkers Associate Chapter’s financial statements, roster, and minutes of last year’s’ meeting.  I uploaded them to Dropbox and e-mailed the chapter members that the materials where there.

Linda got home later than usual from the bakery so we decided to go to La Marsa in Brighton for dinner.  It’s our favorite local restaurant but was more crowded than on a regular Monday due to the buffet they have the first Monday of each month and we had to wait about 20 minutes for a table.  We ordered the almond garlic Ghallaba from the menu, one of our two favorite vegan dishes, but it was not as good as usual.  Not bad just somewhat flat, as if they had left out the garlic.  It was 8:30 PM by the time we got home and we turned in for the night fairly quickly.

2014/11/04 (T) Election Day

Linda did not go into the bakery today.  We spent much of the day together and this is what we did:

  • Had raisin toast for breakfast with Orange juice and banana…
  • ..
  • Got passport photos at Rite-Aid in Brighton…
  • Went to Panera for coffee…
  • Drove to Dearborn for dental hygienist appointments…
  • Drove back to Farmington Hills where we went to McDonald’s and had French fries for lunch…
  • Drove a mile to the Henry Ford Health System Columbus Center in Novi for flu shots…
  • Drove back home where we had a few chips and hummus for an afternoon snack…

I drove to Brighton Honda for a 3:30 PM appointment to have the Element’s recalled air bag serviced.  The appointment took 45 minutes by which time the traffic was really bad.  Because of the combination of rush hour traffic and the ongoing re-paving of Grand River Avenue just west of the dealership a left turn was going to be near impossible.  I needed to get to Latson Road and Grand River Avenue so I made the easy right (and correct) turn out of the dealership and quickly got on I-96 westbound.  I took the relatively new Latson Road exit and stopped at Walmart to stock up on ICE brand water.  I went to Meijer’s for a Mega-Millions lottery ticket and then to O’Reilly’s Auto Parts for two more 12VDC duplex power outlets.  It was still raining lightly, as it had been for most of the day, so I returned home by way of Grand River Avenue and Hacker Road which kept me on pavement for most of the trip.

Linda heated up the leftover chili for dinner.  She continued to try different things to get her Samsung laptop to allow her to adjust the screen brightness and return it to normal but nothing worked.  I took a little time to update WordPress websites and tweak the Wordfence login security.  We then filled out and printed our passport renewal applications and got them ready to mail.  We also figured out how to create, share, and synchronize multiple calendars on multiple devices so that we can now see the same information on our laptops, tablets, and smartphones.  It’s all about Google.

Linda was tired and needed to get up early but something had broken on our bed foundation and needed to be fixed, if only temporarily.  We are still using the plastic foundation that came with our select comfort air mattress years ago and one of the cross members that carry the load to the side rails had come loose from the interlocking top platform and dropped down.  We had to get the mattress off the bed to work on the platform.  We got it put back together for now, but we need to get a box spring or other foundation to replace it.  That probably won’t happen until spring.

2014/11/05 (W) The Day After

Yesterday’s election results were generally as predicted, so nothing to cheer about from our point of view, but the world did not come to an end either.  Elections change very little in the short-term and the daily tasks of living continue regardless of who does or does not get elected.  We were happy, of course, that Gary Peters won the U. S. Senate seat and that Debbie Dingle was elected to the U. S. House of Representatives.  We were especially pleased that our friend, Brian Robb, won re-election to the Ypsilanti City Council and that Richard Bernstein was elected to the Michigan Supreme Court, but saddened to learn that Casandra Ulbrich failed in her attempt to get re-elected to the State Board of Education.  And so it goes with American politics.

Linda was back at the bakery today reviewing the period accounting and continuing to answer questions and monitor the use of the new software.  I took care of some e-mails and then headed to the Brighton post office to mail our passport renewals.  I refueled my car at Meijer’s for $2.899/gal and then stopped at Bed, Bath, and Beyond to exchange two Sodastream CO2 cartridges.  BB&B is in the same strip mall as the Panera, so I stopped in for some coffee.

When I got home UPS had already delivered my package from Prevost.  I took the trash can to the street first and then I opened the box and verified the contents.  I installed one of the Sodastream cartridges but the display would not reset.  The unit has an LCD display so I figured it had a battery hidden somewhere.  I released a clip at the top of the display and the whole display module came out with the nickel-sized battery was installed on the back side.  I started to remove it and the display changed, so I figured it needed a new battery.  I did not think we had any of this type of battery in the house but Linda told me later that we did.

I had not backed up all of my photo files from last week so I spent some time in the early afternoon copying files from my camera to my laptop and then from my laptop to both of our NAS units.  I printed off all of the documents I needed for the FMCA Freethinkers Associate Chapter annual meeting and was responding to an e-mail when Tony and Mark from GSI showed up to install the new natural gas fireplace logs and hookup the new natural gas outdoor grill.

Tony and his wife own GSI but he had Mark install the fireplace while he worked on the grill.  He installed the new disconnect but when leak testing discovered that there was a small leak on the output side of the shutoff valve.  I had to shut off the gas supply to that branch circuit, which also supplies gas to the kitchen range and the fireplace, so he could work on it.  Tony removed the new disconnect, installed a new valve, and reinstalled the disconnect.  I turned the gas supply on and he retested for leaks but did not find any.  He suggested that we run it for a while to burn off manufacturing oils and other things that initially produce odors and can affect the taste of foods cooked in the unit.  I got the stainless steel heat diffuser and two cast iron grills and set them in place.  The left burner lit easily using the battery powered piezoelectric igniter and the right grill lit easily from the left one.

Linda got home at 3:30 PM while Tony and Mark were still working and took over interacting with them while I got ready for our 4 PM telephone meeting.  She got instructions on how to light/operate both appliances, paid them, and then joined me for the meeting.  By 4:05 PM we had 14 “F” numbers represented, safely exceeding our quorum requirement of 10, and Bob Pelc called the meeting to order.  The meeting was friendly but efficient.  We conducted all of the necessary annual chapter business and adjourned at 4:42 PM.  I was re-elected to another 2-year term as chapter secretary but did not run for chapter vice-president, the position I have held since the chapter was formed in June 2010.

After the meeting Linda shut off the outdoor grill and we sat in the living room monitoring our fireplace logs and discussing dinner options.  As a result Linda decided to make waffles.  She tried a different recipe and substituted pastry flour instead for regular flour.  Neither of us understand the difference, at a food chemistry level, but she apparently invented/discovered something that will stick to Teflon-coated cookware; really, really tightly. The waffles were crispy and tasted fine, once we got them out of the waffle iron, but they would not have won any prizes for presentation.

We spent a couple more hours after dinner sitting in the living room letting the firelogs operate with the flue opened a bit.  Tony and Mark said it can take up to 20 hours of use for the unit to stop producing odors and suggested that we operate it with the flue slightly open while breaking it in.  The logs are a non-vented design, just like a kitchen range, which means they are designed to operate without being vented to the outside yet not produce harmful combustion by-products such as carbon monoxide.  At 8:50 PM I turned the logs down to their lowest setting.  Linda shut the unit off at 9:15 PM (it has an On/Off/Remote switch but we do not have a remote).  The pilot light does not consume enough air or produce enough heat and combustion by-products to be a safety or economic concern, so I left it on, closed the flue, and went to bed.

2014/11/06 (R) Inductive Thinking

Linda left the house before I awoke and spent a long day at the bakery.  I spent most of the day at the dining room table working at my computer.  I typed up the draft minutes from yesterday’s FMCA Freethinkers annual meeting, generated PDFs of the chapter’s financial reports, uploaded files to the Dropbox folder, and reorganized it.

I took a break at noon and drove into Novi to have a look at Chuck’s latest bus projects and then go to lunch at the local Leo’s Coney Island.  The new wedge cabinet and Corian top look and fit great between the end of the new couch and the kitchen base cabinet.  He did a nice job replacing the outside Jenn Air electric cooktop/grill, which was mounted in a pull-out tray in one of the bays, with two Indufix 2-hob induction cooktops.  The tray has an open bottom and is supported by four heavy duty extension slides, two on each side.  The induction units are from Germany and came with European “208VAC” plugs.  They are strictly 208/240 VAC devices and do not have a neutral connection.  The wire colors are also different with brown and blue for the L1 and L2 (hot, load) and yellow/green for the ground.  Chuck had an addendum sheet explaining the color codes and how to match them up to the U. S. standard.

For lunch I had a small Greek salad without feta cheese and an order of French fries.  Chuck had a more substantial meal with a salad, chicken on skewers, and rice.  I was back home by 3:00 PM and settled back into my computer-based work.

Linda got home around 6:15 PM and made barbecued tofu sandwiches with grilled onions and corn on the cob.  We washed it down with Leelanau Cellars sweet Red Table Wine.  It was labeled semi-sweet but it reminded me of the King of the North wine from Red Trail Vineyards in North Dakota which had a distinctly grape juice taste.  I liked it and Linda said she did too, which surprised me a little, as she tends to like dryer red wines.

After dinner Linda read and played online word games on her iPad to the warm glow of our new natural gas fireplace logs.  These logs are a high-efficiency, unvented design and actually through heat into the living room rather than up the chimney.  I continued reformatting the Freethinkers chapter roster, uploaded it to my Dropbox, and e-mailed the members to let them know it was available and ask them to review their listing and get back to me with corrections.  RVillage had notified me that someone wanted to join both the CCO and GLCC groups so I logged in and approved those.

I discovered the other day that Wordfence will allow me to block individual IP addresses so I would like to find the time to go back through the “User Locked Out” notification e-mails and enter some of the most egregious repeat offenders.  But not tonight.  It’s late, Linda is already asleep, and I’m tired.

2014/11/07 (F) 50% plus

My objectives for today were the following:

  • Finish up yesterday’s blog post and start working on today’s…
  • Read a few of the blogs I follow in Feedly (I am way behind)…
  • Move the spare Aqua-Hot from the garage to the library…
  • Move any other freeze sensitive items from the garage to the library…
  • Finish the drywall compound work in the library…
  • Call Webasto technical support…
  • Measure the inside of the Honda Element…
  • Buy plywood to build the storage divider for the Element…
  • Start building the storage divider for the Honda Element…
  • Use the blower to clear the leaves from the deck and planting beds….
  • Prepare the FMCA Freethinker annual chapter certification paperwork…
  • Select a few photos to go with blog posts going back to early October…
  • Start uploading blog posts to our website…

That was obviously more than I could possibly accomplish in one day, but it helps to write it down.  Here is how I did…

  • Finish up yesterday’s blog post and start working on today’s…check.
  • Read a few of the blogs I follow in Feedly (I am way behind)…check.
  • Move the spare Aqua-Hot from the garage to the library…check.
  • Move any other freeze sensitive items from the garage to the library…some.
  • Finish the drywall compound work in the library…check.
  • Make an unplanned trip to Lowe’s and Sherwin Williams for paint supplies…Yes.
  • Prime the areas in the library where the drywall work was done…Yes!
  • Call Webasto technical support…check.
  • Measure the inside of the Honda Element…check.
  • Buy plywood to build the storage divider for the Element…no.
  • Start building the storage divider for the Honda Element…no.
  • Use the blower to clear the leaves from the deck and planting beds….no.
  • Prepare the FMCA Freethinker annual chapter certification paperwork…no.
  • Select a few photos to go with blog posts going back to early October…no.
  • Start uploading blog posts to our website…no.

That’s 6-1/2 + 2 out of 13 + 2 or 8-1/2 out of 15 which is over 50%; not bad.  I might have gotten one or two other things done, or at least started, but we ended up meeting Chuck at BD’s Mongolian Bar-B-Que in Novi for dinner at 7:00 PM.  Barbara was still attending to out-of-town family business and Chuck appreciated not dining alone.  We were at the restaurant for over two hours and had a nice meal and great conversation in spite the very loud, upbeat youthful vibe of the place.  Next time we will try Sizzling Sticks in Northville; same kind of food but a much more subdued atmosphere according to Chuck.  Overall it was another good day.

2014/11/08 (S) Steve and Karen

We had a good sized crowd at the ham radio breakfast this morning.  We did not have to be anywhere at any particular time, and we were enjoying the conversation, so we stayed a little longer than usual.  Once we got back to the house I changed into work clothes for drywall and painting while Linda gathered up the recyclables and finished her grocery list.  She left to run the errands and I got the painting tools/supplies out.

Linda dropped off the recyclables, stopped at the bank, stopped at Lowe’s to return something that it turned out we had not purchased there, and then did the grocery shopping at Meijer’s.  While she was gone I put a first coat of paint on the areas of the west wall of the library where I had repaired the drywall.  The item she planned to return was a can of Great Stuff Fire Block that broke yesterday when I tried to use it.  It turned out that I had not purchased it at Lowe’s as they do not sell it.  They sell a 3M product for the same application, which I had sitting in the garage but had overlooked.  I used it to try to fill gaps around the gas supply pipe and the condensate drain, which were open clear through to the outside, and the double-walled flue pipe and gas pipe that pass through the furnace closet wall.  I applied the foam from inside the furnace closet and will need another can to finish the job from the outside of the closet.

Linda started putting together supper while I gathered up laundry and started a load.  I spent some quiet time with Jasper, our very sweet 10-year old cat, and then settled in to write and read for a while.

Steve and Karen arrived at 5 PM and we visited while Linda put the finishing touches on dinner.  She made the warm Farro dish with kale, dried cranberries, almonds, garlic, and onions and roasted asparagus as a side.  She has the Farro dish tagged “good for company.”  We still have a few bottles of the 2009 Egri Merlot and the slightly sweet full body of this wine went very nicely with the earthy Farro.  She made a chocolate cake for dessert with raspberry sauce made from fresh raspberries.  I think the cake was her best yet; very moist with just the right texture.  Vegan baking is tricky and Linda is still figuring it out.  Sometimes the cakes are a bit dry and other times they lean towards being brownies but tonight she got it just right.

Steve brought his Raspberry Pi single board computer (SBC) and an SD card with photos of their recent (September) trip out west.  He connected the Pi to our TV/monitor in the basement so we could all comfortably see the photos.  They had excellent weather and some fall colors the days they were in Yellowstone National Park and got some nice images.  But we spent most the evening sitting in the living room enjoying the new natural gas firelogs and catching up on what we had been doing since we last saw each other.  They left around 10:30 PM and we had everything picked up by 11 PM and headed off to bed.

2014/11/09 (N) Wrapping Up

Today was mostly about wrapping up the library drywall/painting project and other minor chores, doing laundry, and getting me packed for a two week return visit to Twelve Mile, Indiana to work on our bus and help Butch and Fonda work on theirs.

Linda made blueberry pancakes for breakfast, which is always a treat.  I made a trip to Lowe’s for a nine inch disposable paint roller cover and another can of 3M Fireblock spray foam.  I used the can of spray foam to finish sealing the gaps in the utility closet wall openings where the black iron gas pipe and the double-wall flu pass into the garage.  I only needed a little more foam to finish the utility closet openings so I used the rest of the can to fill gaps around the rear entrance door in the garage.

I used some scrap packing paper from recent Prevost shipments and some frog tape to mask the opening for the library furnace return air grille.  I then used flat black spray paint to make everything that is visible through the slots in the cover disappear.  Finally, it was time to paint walls.

I used a small brush to cut in the adjacent wall and ceiling with the Sherwin-Williams Extra White satin finish paint.  I removed the cover plates from two outlets and a switch and then rolled on a new/final coat of paint.  I cleaned up my paint supplies and then we brought the outdoor grill (and cover) into the garage to store for the winter.  We also brought the patio table umbrella and base into the library and set the umbrella in the base for the winter rather than let in lie on the floor.

Linda made another batch of granola while I checked stuff on my computer and took care of laundry and packing.  We had leftovers for dinner at 5:15 PM and then headed to South Lyon for the monthly SLAARC (ham radio) meeting where I was re-elected as VP for a second year and Linda was elected Treasurer for the coming year.  The program was a presentation on Software Defined Radios (SDR) by Mike Alexander (N8MSA).  When we got home we finished the chocolate cake and raspberry sauce with a glass of Leelanau Cellars Autumn Red wine and then turned in for the night.

 

2014/09/29 (M) Full Converted (Not)

Linda was up at 5:45 AM.  Hey, it’s just a number.  I mean, who needs daylight?  She quietly got dressed and slipped out of the house to drive to the bakery.  This is how it’s going to be on days when she has to be physically present at the facility.  Unless I am away working on the bus.  In that case she probably does not worry about being quiet.

I got up around 7 AM and had a nice breakfast of homemade granola, orange/grapefruit juice, and coffee and then spent some time catching up on blogs that I follow.  Keith showed up around 9:30 AM to cut the grass.  Butch had called last night to ask Linda a question and asked that I call him when I had a chance.  Our company did not leave until after 9 PM last night, which was great, but too late to call Butch back so I called him this morning around 10:30 AM.

Butch had used a stop leak additive product to try to plug a leak in his Aqua-Hot main coolant loop but it did not work.  The Aqua-Hot is a Webasto-based diesel-fired hydronic heating system.  Rather than repair the Aqua-Hot, or replace it with another one, he decided to order an Oasis Combi unit from International Thermal Research.  The Combi has a lower BTU rating than the Aqua-Hot but is smaller, simpler, and uses stainless steel for some of the components.  It should be more than adequate for their bus, which is very well insulated, and give them years of trouble free service.

Butch and Fonda’s Aqua-Hot is a very similar model to ours and I will probably buy it from them as a source of spare parts.  His burner is fully functional, which ours is not at the moment, and the short term fix for our unit may be to just swap the burners.  I can then repair the defective burner at my leisure and have it available to swap back should the replacement ever develop a problem.

As a result of our conversation I decided that I will take our bus to their place tomorrow, leaving around noon and arriving between 4:30 and 5:00 PM.  In preparation for that trip I needed to gather up and organize parts, materials, and documentation for my initial set of projects.  I also needed to do laundry and select clothes for the trip.  I may also need to do some grocery shopping this evening unless Linda already has food in the house that I can take.  Tuesday morning I will have to load clothes and toiletries, hook up the car, check and adjust tire pressures, load computers and other last minute items, and get the bus ready for travel.

My main focus for Wed, Thu, and Fri will be the Aqua-Hot (no burn and leaky exhaust).  If we have time I would also like to finish installing the Zena 24 VDC power generating system and get it operational.  I will return on Friday afternoon/evening in the car as Butch and Fonda have plans for the weekend and I still have lots of things to take care of back at the house.

Keith finished up with the lawn a little before noon.  He will be back at least two more times, once in mid-October and again towards the end of the month.  Whether he cuts the grass in November or calls it quits for the season will depend on the weather between now and then.  His basic grass mowing season is April 1 through October 31 and he has his business insured for that range of dates, but he said he would come back in November if needed.  The grass should be dormant by then, but there may be a few leaves that still need to be mulched.  There could also be a foot of snow on the ground, so it will all depend on the conditions prevailing at the time.  During the mowing season he spends the work week living at their trailer/cabin at Haas Lake RV Park, which maybe 20 miles from our house, but by November 1 he is looking to move himself and his equipment back home to Milan for the winter.  Milan is at least 60 miles from our house, maybe a bit farther.

I spent a little time at my desk and decided to re-install WordPress 4.0 on the SLAARC, FMCA Freethinker, and FMCA Great Lakes Converted Coaches websites.  I re-installed it a couple of days ago on this (our personal) website, but I have not tried creating or editing image galleries since then so I do not know if the broken drag-n-drop feature has magically been repaired or not.  I suspect not, but Linda says I’m a pessimist.

I had a quick bite of lunch and then read a few more blog entries while I waited upstairs for Brandon from Bratcher Electric to show up and convert the whole house generator from propane to natural gas and do the annual maintenance and multi-point inspection.  He arrived at 2:15 PM and was here for about an hour.  I had him show me how to disable the generator as it has to be turned off anytime I want to shut off the power coming into the main distribution panel in the basement.  He did not have the correct length of flexible gas line and will come back on Friday to do the LP to NG conversion.  Besides disconnecting the propane and connecting the natural gas the conversion involves attaching two wires to a pair of corresponding terminals on the gas valve inside the unit and changing a setting in the controller.

While Brandon was working on the generator I started gathering things from the garage that I needed for tomorrow and loading them in the car and the bus.  We already have quite a few things staged to take to the Surplus and Salvage Rally next week, but I will take those things with me when I return to Butch and Fonda’s early next week.

Linda called at 4:35 PM to let me know she was on the way home.  I drained the water out of the fresh water tank on the bus as it had been sitting in there since June.  (Yuck.)  The fresh water hoses needed to be cleaned before I used them so I filled their storage tub half full of softened water and added some bleach.  I coiled them up, hooked the ends together, let them soak for a while, and then wiped them off with clean paper shop towels.  Much better looking, and probably and lot more sanitary.

Linda got home at 5:30 PM, a very quick trip for that time of day.  Butch had called just as she was getting home to let me know that he had spoken to someone who has two RV spots in Quartzite we can rent for a very reasonable price this winter.  Linda and I need to discuss it, and would like a few more details, but that probably makes more sense than trying to boondock our first time out there, especially as we do not yet have solar panel on the roof of our coach.

Linda made a nice green salad and heated up some of the lasagna from yesterday.  Italian bread with garlic “butter” and a glass of the 2009 Egri Merlot completed the meal.  We talked about our respective days, reminiscent of when we both worked outside the home.

After dinner I finished cleaning the fresh water hoses, filled the fresh water tank, and then drained and stored the hoses.  While I did that Linda gathered food items, bedding, and towels and put them aboard the bus.  It will still take me a few hours to get ready to leave tomorrow, but I should not be rushed getting everything done.

Linda heated up some of the apple/pear crisp for dessert after which we sat on the sofa and looked at highway maps on her iPad.  The map app on the iPad said the trip from our house to Quartzite, Arizona was about 2,100 miles and would take “1 day, 9 hours.”  That’s non-stop, of course; i.e., 24 + 9 = 33 driving hours.  That time works out to just under 64 MPH.  I typically drive the bus at 60 to 63 MPH on Interstate highways, but we do all of our trip planning based on 50 MPH.  That usually works out well at taking into account for fuel stops, rest stops, and non-Interstate roads.  This means our travel time will be more like 42 hours.  Our preference is to only travel 200 to 300 miles per day, or 4 to 6 hours a day, so the actual number of travel days will be between 10 and 7.  We like to spend more than one night at each stop, depending on what there is to see and do in the area, so the number of days it will take us to get to Quartzite will 2 to 3 times the number of driving days.  A lot of the details of our trip will be last minute decisions based on weather, but our “plan” is to leave December 1st and arrive in Quartzite by December 21st, more or less.

 

2014/09/26 (F) Hope Is Not A Strategy

Linda was up at 7:00 AM, I was up at 7:15 AM, and Madeline was up at 7:45 AM.  Marilyn got up later.  Given a choice she’s not a morning/breakfast person.  Linda got up first to prepare the batter for her fabulous vegan blueberry pancakes which she planned to serve with fresh fruit and real maple syrup.

I powered up my iPad2 and discovered that Apple had released iOS 8.0.2.  Apparently I was not the only person having some issues with the release, like sluggish response and a Bluetooth keyboard that quit working properly and then quit working altogether.  I tested the keyboard with my laptop computer last night and it worked fine, so I knew there wasn’t anything wrong with it.  I downloaded the iOS update and everything was back to normal (once I figured out how to re-pair the keyboard).  With any luck perhaps WordPress will also issue a maintenance release today and fix the completely broken drag-n-drop feature of the media gallery.  As Deb Wahlstrom said once in a workshop, “hope is not a strategy,” but when things are completely beyond your control hope is sometimes all you have.

Linda tried to use the griddle that fits over the oblong center burner of the new G. E. kitchen range to cook the pancakes but forgot to turn it down from the preheat setting, which produces a LOT of heat.  It burned the first pancakes firmly to the griddle.  Madeline was already in her high chair waiting for her breakfast, so Linda grabbed a non-stick frying pan and cooked the pancakes in that.  The fact that the griddle and the preheat feature are both new and that there was a certain pressure to get Madeline her breakfast was not an ideal combination for a first attempt at using the griddle.  I doubt that she will make that mistake again, and the frying-pan-cakes were still very good.  The fresh fruit turned out to be bananas, but that was OK; we all like bananas.

After breakfast I played with Madeline while Linda cleaned up from breakfast.  Karen called from Bratcher Electric to let us know that Brandon had called in sick and she needed to reschedule our generator conversion and service for Monday between 1 and 3 PM if that would work for us.  It was not ideal from my perspective as I was thinking about taking the bus to Butch and Fonda’s on Monday, but that could obviously wait until Tuesday or later.  If necessary I could delay taking it until after the GLCC Surplus and Salvage Rally.

I waited until Marilyn got up at 9:15 AM to make the coffee; we all like our morning coffee.  Linda was busy with Madeline by that point so Marilyn cooked her own breakfast.  There was enough batter left for two pancakes.  She’s always very helpful that way when she comes to visit.  We often have to insist that she just sit, relax, be our guest, and let us take care of things.  It’s really not a bother; we like having company and we do not expect them to work while they are here.  Of course, if they insist on helping with the dishes, who are we to deny them the joy of being of service?

Marilyn started packing at 10:45 AM while Linda gathered up Madeline’s things.  When it was time to load the car for the trip to Ann Arbor my job was to hold Madeline’s hand (actually, she held my finger) and get her out the front door, down the new steps/sidewalk, and over to the car.  (Hey, grandpa-ing is serious work.)  Although she understood that she was returning to her house where daddy and mommy would feed and play with her, she wasn’t quite ready to leave.  She and I “marched” up and down the driveway several times before she was ready/willing to let Grandma Linda put her in her car seat.  She is now big enough that the seat gets installed facing forward, which is a very big deal as she can now see where she’s going in life instead of where she has been.  Marilyn rode in the back to keep her entertained on the drive down.

The weather this week has been spectacular; a classic late September in Michigan with lows around 50, highs around 75, clear blue skies and light breezes.  I shut off the various thermostats and opened up the house.  I spent the early afternoon editing blog posts from the last couple of weeks and then off-loaded photos from our Sony alpha 100 SLR, organized them, and backed them up.  I stopped for a bite of lunch and then decided to have another go at the lawnmower.  If I cannot get it started I will have to take it somewhere and have it repaired.  🙁

I had already installed the new spark plug last night and that did not fix the problem.  I dumped the gas tank out into an open tub and put some of the fresh gas I bought last night into the tank.  I took the tub to some of our woods a good distance from our drinking water well and spread it around on some leaves.  Most of it will evaporate rather than soak in.  Not the most environmentally sound thing to do, but a lot safer than an open tub of gasoline.

Before I tried to start the engine I checked the back discharge chute, out of habit, to make sure the mulching insert was in place.  It was but there was a lot of dried grass as well and it had obviously not been cleaned out the last time it was used.  There was also a lot of fuzzy material mixed in with the grass, a sure sign that a mouse had taken up residence there at one time.  I removed the insert and shook it off into the tub and discovered that it still had a mouse in it.  The mouse was quite dead and very stiff but did not have any obvious injuries and did not emit any odor.  It was in surprisingly good conditions, so perhaps being encased in the dried grass and fuzz helped preserve it.  It was not trapped so it is a mystery why it stayed in there and died.  The mower was in our garage all winter, and although it got very cold (-20 F) the mouse would not have been trapped in the garage either; there are gaps around the doors that would easily allow a field mouse to come and go.  (Now that we have the garage furnace, sealing the doors is on my project list.)

With the discharge chute cleaned up the mower started on the first pull !!!  (This is something Honda has bragged about in the advertising in the past.)  I let it run for a while on high throttle to warm it up and make sure it had fresh gas all the way through the fuel system.  I then brought the throttle back to idle to let it cool off and stabilize and then shut it off.  I did not think it was going to start so I was not wearing my safety goggles or gloves.  I usually wear hearing protectors as well, but I could not find them.  (I realized later they were probably in the construction equipment tub we took with us last summer.  I will look there tomorrow.)  I topped off the tank with fresh fuel and it started on the first pull again.  The new spark plug is a more aggressive design that is supposed to spark more easily and that may have helped.  Whatever the reason, I like how easily it now starts.

I spent an hour cutting the grass in the immediate vicinity of the house.  I focused in particular on the areas that Keith does not get with his riding mower and areas that were disturbed (destroyed) and re-seeded as part of the landscaping work and re-seeded again by me (twice).  The new grass is coming in fairly well at this point although there are still a few thin spots.  And even though Keith mowed most of this new grass on his last visit it was getting tall again.  I was surprised how moist much of the grass was, especially in areas that are now mostly shaded throughout the day, as we have not had any rain in the last week.  Keith had mentioned the last time he was here that the grass was very moist; “…more like April/spring grass than September/fall grass.”  I did not get everything mowed.  I still have to do the two slopes by the retaining walls in the back, which are steep and physically demanding even with a self-propelled mower, and most of the west end of the house.  It will take me at least another hour to finish but I had done enough for today and wanted to relax for a little while before Linda got home.  Besides, it will be there tomorrow, and it should be a nice day to work outside.

Linda called around 4:35 PM and left messages letting me know that she had dropped Marilyn at the airport and was starting for home.  That drive would take close to an hour in light traffic, so I figured I would not see her before 6 PM.  She pulled in the driveway at 6:10 PM.

We had three left over salads for dinner: chickpea; Farro with cranberries, and; wild rice with apples and raisins.  Easy and delightful.  Marilyn texted Linda several times to let us know her travel status.  Her flight was delayed almost an hour but eventually took off and got her safely back to St. Louis, Missouri.  We were both tired and turned in early, but I got my second wind after I located a service manual online for a model of Aqua-Hot that is very similar to the one in our bus and started reading about how to diagnose what might be wrong with our unit.  Based on the symptoms my current best guess is a stuck fuel valve or defective fuel valve solenoid.

 

2014/09/25 (R) Two M’s

Linda made zucchini bread and muffins a week or so ago.  We ate all of the muffins within a couple of days but she froze some of the bread.  She took the bread out of the freezer last night to let it thaw so we could have it for breakfast this morning.  She warmed it up and made a fruit salad to go with it, along with our usual fruit juice and coffee.  Marilyn took advantage of her visitor status and slept in so we had breakfast without her and she ate when she finally got up.

Madeline in her sofa-bed with her Winnie-the-Poor sleep sack.

Madeline in her sofa-bed with her Winnie-the-Poor sleep sack.

I was working on the electrical outlets in the garage when Brendan arrived at 9:45 AM with Madeline in tow.  Meghan arrived around 10 AM, so Madeline had all the “buddies” here to admire her.  I finished my electrical work, touched up some drywall compound, and then got cleaned up.  I was once again the designated reader and got to read three books to Madeline.  She had lunch at noon and her dad got her down for a nap around 12:30 PM.  Meghan is still experimenting with foods, so she left to do her grocery shopping on the way home.

The "buddies" (L-2-R): Brendan, Marilyn, Meghan, and Linda.  (Not shown: Bruce, taking the photo.)

The “buddies” (L-2-R): Brendan, Marilyn, Meghan, and Linda. (Not shown: Bruce, taking the photo.)

Brendan stayed for lunch and a long chat.  He was thinking about leaving when he decided to check out my old Toyo view camera.  He figured the students in his history of photography class at the University of Michigan had probably never seen one and wanted to take it in for them to see.  He also wanted to have it at his house to play with.  We found it and checked that all the parts were there and he loaded it into his car along with the tripod and dolly (studio roller base).  Madeline started to wake up so he made his exit.  She doesn’t seem the least bit concerned if he’s not here when she wakes up, but is momentarily distressed if she sees him leave.

Flowers along the Mill Pond boardwalk (Brighton, MI).

Flowers along the Mill Pond boardwalk (Brighton, MI).

Madeline is spending the night tonight so we will two M’s here the rest of the day and tomorrow morning.  Linda and Marilyn will take Madeline back to Ann Arbor tomorrow in time for lunch and her 1 PM nap.  Madeline has swimming on Fridays at 4 PM so Linda and Marilyn will leave before that and stop at Whole Foods Market before taking Marilyn to Detroit Metropolitan Airport for her evening flight back to St. Louis.

I took a few minutes to check e-mail while Madeline was napping.  This morning I had tightened up the Wordfence parameters on the FMCA-GLCC site and switched the caching from the faster Falcon Engine to the Basic setting in order to fully activate country blocking.  I only had a few failed login attempt e-mails so I think it made a difference, but only time will tell.  I also white listed our own IP address to make sure we did not get locked out if we mis-typed our login credentials.

Madeline with Grandma Linda on the Brighton Mill Pond boardwalk.

Madeline with Grandma Linda on the Brighton Mill Pond boardwalk.

I had an e-mail from my niece, Amanda, with a couple of pictures of her daughter, Lilly, a very pretty and sweet-tempered child about six weeks younger than Madeline.  We saw them in late June and will like try to visit again en route to the southwest this winter, weather permitting.  If not, we will certainly try to stop in the area on the way back in the spring.

When Madeline awoke from her nap we let he play long enough to fully wake up and then we all went to downtown Brighton.  We walked the boardwalk along the east edge of the Mill Pond and saw a Painted Turtle, an egret, some fish, and lots of ducks and geese.  We then took the pedestrian bridge to the west side of the pond where the playscape is located.  The playscape is a wonderful place with structures built to suggest animals and Madeline explored it thoroughly with Grandma Linda’s help while I took pictures.  It also has an area with chalk boards and a mailbox full of sidewalk chalk that the kids can use to draw.  Madeline spent quite a while trying all the different colors.

Madeline with Grandma Linda at the playscape by the Brighton Mill Pond.

Madeline with Grandma Linda at the playscape by the Brighton Mill Pond.

We stopped by Lowe’s on the way home to return the spark plug I bought last night and get the correct one.  By the time we got back to the house Madeline was hungry so Linda got her dinner ready right away.  For our meal Linda prepared a green salad with sunflower seeds and dried cranberries topped with Ken’s Sweet Vidalia Onion dressing (one of our favorites) and a one pot meal of quinoa with black beans, corn, and onions.  Linda and I finished the Red Guitar Sangria with dinner (Marilyn does not drink alcoholic beverages).

Madline working with chalk at the Brighton Mill Pond playscape.

Madline working with chalk at the Brighton Mill Pond playscape.

Madeline played quietly with Linda for a while as I chatted with Marilyn. Before we knew it, it was time for Madeline to go to bed.  The time between dinner and bed always seem short compared to other intervals during the day.  She is always very good about bedtime and went without a fuss.  Linda spent about 30 minutes getting something ready to e-mail to the bakery software vendor while Marilyn played Words With Friends and I researched where we could buy more Red Guitar Sangria.  It is available at the Meijer’s stores in our area and is very reasonably priced so we will probably get some more.  We had apple crisp for dessert after which Linda and Marilyn played three-way online Scrabble with each other and their brother Ron in Pennsylvania.

 

 

"I think this color goes right here."

“I think this color goes right here.”

Madeline is a very good-natured and relatively calm child but when she is awake she is full engaged with the world around her.  We were all tired after a long but very satisfying day of visiting and turned in without watching any TV.

 

2014/09/19 (F) Renewed Acquaintance

After I installed iOS8 on my iPad2 yesterday morning my Logitech Bluetooth keyboard seemed to change its behavior, giving me double letters in some cases and feeling a little sluggish in its response.  The keyboard itself has not changed, so I presume this has something to do with iOS8.  I also presume the keyboard batteries have not run down already, but I suppose that is a possibility.  If so, I will be replacing them once a week.  While creating an image gallery for the SLAARC WordPress website last night I noticed that the drag and drop feature of the gallery editor did not work.  I upgraded to WP Version 4.0 about a week ago but this was the first time I had tried to use the gallery feature.  If there is a problem with this feature there is no way that I am the first person to discover it and I presume WordPress is aware of it.  I find it strange, however, that they have not released a maintenance update fixing it since an improved and more visual editor was a major feature of the 4.0 release.

A few weeks back I re-established contact through Linked-In with a colleague from 10 years ago.  Jim was Director of General Education Services at Livingston Educational Service Agency at the time and we went through NCA Ambassador training together.  It turns out that he lives and works in the Brighton area, so we are now neighbors of sorts.  He suggested we meet up for coffee and I finally called him this morning to arrange that.  We both had time at 1:30 PM today and agreed to meet at the Panera on Grand River Avenue by I-96 at that time.

Linda got the new Global Bake bakery software installed on her laptop yesterday so this morning she was able to start working on the software conversion process in earnest.  Her work requires a lot of concentration, and she gets very focused when doing it, so I went to my office to continue working on editing blog posts and photos.

In checking my e-mail I noticed that I was still getting failed login attempts from foreign countries on this site and on the FMCA GLCC website, which is sub-domain of this site, in spite having installed the premium (paid) version of the Wordfence Security plug-in.  I looked at the installed plug-ins for the GLCC website and discovered that I had one named “Limit Login Attempts” that I did not have installed on our personal website or the other two sites I manage.  I surmised that this plug-in might be doing just what the name implied and in the process preempting Wordfence from ever doing its job.  I deactivated it and saw a reduction in failed attempts, with none from outside North America, suggesting that the country blocking feature of Wordfence was now working properly.  I saw a similar drop in failed login attempts on our personal website when I activated the country blocking feature for all countries except the U.S., Canada, and Mexico.  Only time will tell, however, if Wordfence is indeed blocking login attempts from outside North America.

We had hummus and apples for lunch after which I hung up one load of laundry and put another load in the washer.  I left at 1 PM to have time to stop at Best Buy to get something to clean our various touch screens and monitors.  Traffic was very heavy in the I-96 and Grand River Avenue shopping area, but Best Buy is in the same shopping complex as the Panera, so I made it there on time.  Jim and I talked for almost two hours and which covered the highlights of the last eight years.

Back home I kept my focus on getting the blog caught up.  Linda wrapped up her work for the day and we finished the bottle of Alpha Rose from Red Trail Vineyards while she fixed a simple but tasty dinner of vegan burgers and corn.  I got a call from Butch letting me know that the company in Nevada had arranged for a semi and taken all of the parts they plan to take.  Everything that is left is Butch and Fonda’s to do with as they please.  The important thing for us is that I can now take our bus down there at my convenience.  I would like to get all of the natural gas related work taken care of and put the finishing touches on the garage project before I move the bus, but I may go ahead and move it next week if the scheduling of contractors works out.

During the evening I had an exchange of TXT messages with Chuck.  He had ordered some miniature 24VDC light bulbs (1829s) that are used in our bus dashboards and the order had arrived.  Rather than go to his shop after breakfast tomorrow we arranged to meet him for dinner tomorrow night.  I also got a call from Michele Henry of Phoenix Paint.  She had a new customer who just bought a mid-1990’s Prevost XL converted coach and she gave him my name and phone numbers in case he had any questions about the rig.  We agreed that we would try to find time during the GLCC Surplus and Salvage a Rally to work on the article I started last year about the process she used to repair the body and roof of our coach, seal and coat the roof, and paint the body.  We capped off the evening with the second to last episode of Season 5 of Doc Martin. We need to return the DVDs to the Howell Library on Sunday, so we want to make sure we get through all of the episodes for Season 5.

 

2014/09/16 (T) Boiled Over

Our son (Brendan) texted Linda early this morning to see if we would like to have grand-daughter Madeline spend the night while Marilyn is here next week.  It turns out that next week Thursday and Friday are Jewish holidays, and Madeline attends a Jewish run day care facility.  Of course we said “yes.”

Linda worked at her desk on our personal finances in the morning, worked on her counted cross-stitch project for a while in the afternoon, went on a couple of long walks, and managed to get breakfast, lunch, and dinner on the table.  But as days go, it was fairly low key even for her.

I called Country Squire Fireplace and Lighting in Howell and asked for Bob as I had been instructed to do.  It was Bob’s day off but I got to talk to Mark.  Mark told me that they can get a 12′ hose with a 3/8″ flare fitting on one end and quick disconnect on the other end.  The QD includes the male fitting attached to the hose and the female fitting that gets threaded onto the supply pipe.  We already have a female QD fitting (Marshall Brass BC0102-0600) but it may not be compatible.  I had measured before I called and knew that we needed at least an 8′ hose, so 12′ will work just fine, especially since two feet of it has to go up through the base from the back and then out the top of the base and attach to the grill.  Mark asked me to call back tomorrow and talk to Bob to order it, so that is what I will do.

I double checked online that the range we had ordered was indeed a natural gas model.  It was, so there was no need to call the appliance store to confirm that.  I had a call back from Darryll at DCM Heating & Cooling.  He thought he would be able to come back on Friday or Saturday to hook up the gas from the meter to the house and the new black iron pipe and start up the two new furnaces.  All of the other gas conversion work we need done is dependent on Darryll getting his piece done first and I asked him if it would be possible to come on Wednesday.  He said he would check his schedule and see what he could do.  Darryll has been great to work with, and I try not to be demanding, but I cannot schedule other contractors until there is gas to the house.

I checked the label on our Weil-McLain “boiler” that provides heat for our hot-water baseboard heating system and domestic hot water.  It’s a GV-5, Series 1.  That allowed me to hone in on the right manuals on the W-M website from which I was able to identify the part number for the LP –> NG conversion kit.  It’s a 510-811-630 and consists of an orifice plate and an adhesive label that has to go on the unit.  The unit is a discontinued model, but service parts appear to still be available.  I found the conversion kit at the first online supplier I checked for under $31 (plus S&H) but delivery looked to be 2 – 3 weeks.  Ugh.  I placed a call to TOMTEK HVAC in Howell to see if Tom had checked on this yet.  He hadn’t so I gave him the model and serial number of our unit and mentioned that I had found the orifice plate online.

I worked at my desk for a while uploading blog posts from the last third of August, but it was such a beautiful day that I decided to work upstairs on my iPad2.  I called Bratcher Electric around 4 PM just to give them a “heads up” that we had a meter with natural gas.  Karen gave me Mike’s cell phone number and a time window during which I would likely be able to reach him.  He has been very busy doing estimates for storm damage repairs and has not been in the shop much the last month.  I got hold of him to let him know that we might be ready for them as early as next Monday, but anytime in the next couple of weeks after that would be OK.  Again, I try not to be unreasonably demanding, and I try to be truthful with folks.  Sometimes, however, that just results in us being put at the back of a long line of people who are unreasonably demanding.

Linda made maple baked lentils with sweet potato and apple for dinner.  It really hit the spot on a cool evening.  After dinner I continued working on selecting and editing photos for a gallery post on the natural gas pipeline work.  My cell phone cannot receive calls in the basement but it can receive txt messages and notifications.  Tom had called back from TOMTEK regarding the boiler conversion.  He can get the parts locally in about four days and wants $250 to do the conversion plus $59 for the service call.  A total bill of $310 to install a $30 part (retail) sounded excessive to me, so I may make a few inquiries first thing in the morning before I call him back.

We watched Season 5 Episode 5 of Doc Martin.  It was nice to see it on the TV rather than the iPad with a large screen, better sound, a DVD quality image, and no buffering.

 

2014/09/15 (M) Congratulations, You Have Gas

As I reported in the blog post for this past Saturday a natural gas hookup crew was at our house in the early morning but it was the wrong crew (trench/plow) installing the wrong size gas line (1/2″ id).  The correct crew (directional boring) showed up today around 9 AM and started boring the line for our neighbor’s yard across the street.  I chatted with the crew briefly and they said we were next.  They had placed a large role of the proper size gas line (1″ id) in our yard, so I knew they knew what they were doing.

Ed, who had stopped by on Friday and runs the hookup crew, was not sure whether they would hang the meter and connect the line at both ends today, but if not, tomorrow for sure.  Their presence on site, however, meant that I would need to be in contact with three contractors fairly soon to follow up on arrangements to get them out here ASAP, and in the following order:

  • DCM Heating and Cooling, to disconnect the propane from the house and tie the new 2″ black iron pipe together with the pipe into the house and connect them to the consumer side of the gas meter.  Also, to start up the new library and garage furnaces.
  • TOMTEK HVAC to convert the hot water base-board heating system to natural gas.  Tom was going to check today with Weil-McLain on the parts needed for the conversion and let me know.  Our own research suggested that a natural gas orifice plate was the only part needed, but a number of steps were involved in the installation and I doubt that W-M would sell me the part directly.  (I did find it later online for $31 plus S&H, so I could buy it if I wanted to.)
  • Bratcher Electric; to convert the whole house generator, do the annual maintenance, and run the new service entrance cable for the garage panel.

Mike Bratcher was here a month ago to look at the job but had not gotten a price to us yet for the work.  They have been slammed with repair jobs as a result of late summer storms.  The generator is the least critical component at the moment as it is on its own propane tank, but we want to get it switched in a timely fashion so we can call AmeriGas and have both tanks removed at the same time.

(Ed told me later in the day that Consumer’s Energy requires us to be switched over to natural gas within 30 days of having gas to our meter.  He also said that a recent Michigan law (last year) made it illegal to have multiple fuel sources to a house.  Since the generator is on its own propane tank and that tank is not connected to, or provide propane to, the house or anything in the house, technically we would not have two different fuels going to the house even if we left it hooked up.  Still, we are not looking to create a “situation” with Consumer’s Energy.  Presumably the multi-fuel prohibition does not include electricity and wood.)

Keith showed up around 9 AM to cut the grass.  I chatted with him briefly about cutting the new grass, which had gotten long enough in many spots that I thought it was probably time for the first cutting.  I picked up some small tree branches that were scattered about the yard from recent storms, and warned him about the trench at the southeast corner of the house.  I chatted with him some more as he was finishing up with the string trimmer.  He said the grass was “April grass, not September grass.”  The grass itself (internally) was very moist, not just the soil.

This is how Keith cuts over 4 acres of grass in a few hours.

This is how Keith cuts over 4 acres of grass in a few hours.

Linda had reserved Doc Martin, Season 5, at the Howell Library and had an e-mail that it was available and needed to be picked up by the end of today or we would go to the end of the waiting list.  She needed to be at the bakery by 11 AM so she left around 9:45 AM to be at the library when it opened at 10 AM.  I would have gone to get it but I was “stuck” at the house as long as contractors were, or might be, working here.  I also needed to be here to pay Keith when he finished cutting the grass.

Linda met with the folks at the bakery (where she was the Controller and Treasurer for the 10 years before she retired) on Friday regarding a major software conversion project that she is going to do for them and was finally feeling like we could afford a new range.  She is a very good accountant/CPA and has always worked hard for what she earned, but has always been reluctant to spend money.  We grew up in very different circumstances and that reluctance on her part has provided a good balance over the years as I tend to be less concerned about what things cost and more focused on making sure we have what we need and are getting good functionality and quality for what we spend.  One component of my formal education and work experience was engineering, and that developed a certain way of thinking about things that has stayed with me ever since.  Need is, of course, relative.

We had been deferring a decision about the new kitchen range but decided on Friday evening that, with the natural gas hookup imminent, we would get a new one rather than convert our old one.  We decided on the model we wanted, a G.E. JGB870DEFWW, and knew the price, delivery time, and installation charge from Lowe’s.  I also talked to Curt at D. R. Appliance, a local family owned appliance store, on Saturday and expected to hear back from him today with pricing and availability.  That call came late morning and their price, while a little higher than Lowe’s, was close enough to be worth the possible end-of-week delivery and installation so I told them to go ahead and order it.

By 3:30 PM the gas line to our house was in the ground and the meter was mounted on the side of the house but a crew was still digging out by the street trying to clear access to the main line so the fuser could tie our line and our neighbor’s line into the 2” main line.  My camera battery went dead while they were installing the meter so I grabbed a few shots on my cell phone while the camera battery recharged.  Linda got home around this time and got to see some of the final steps in the process.

I followed the process closely all day and tried to get photos of most of the details, especially as they hung the meter, tied the line in, and pressure tested it.  All was good, so they tapped the main line and we finally had gas in our branch line.  They purged the line, reconnected it to the meter inlet, tested the meter and connections for leaks, and then verified gas availability to the outlet connection.  At 5:30 PM they plugged the outlet, put the hang tags on, and handed me the door knocker tag that said “Congratulations, you have gas.”

We always seem to have interesting things in our yard.

We always seem to have interesting things in our yard.

Linda took a call from Bob at Country Squire Fireplace and Lighting regarding our quick disconnect for the Broil King outdoor grill.  She indicated that I was busy with the gas crew and would call them back tomorrow.

Late last week we received an invitation to a political fund-raiser for Brian Robb, an incumbent councilman in Ypsilanti, Michigan.  We do not live or vote there, but Brian is Kate de Fuccio’s significant other, and Kate is a former co-worker of mine and continues to be a very good friend of ours.  I called DCM Heating & Cooling and left a message for Darryll that we had gas to the meter.  We left around 6 PM and arrived at the Tower Inn Cafe around 7 PM.  We made a donation to Brian’s campaign and Kate ordered a small vegan pizza for us.  We visited for about an hour and then took our leave.

When we got home we relaxed in the living room thinking about how nice it will be to have our natural gas fire logs while we had some fresh strawberries and nectarines for dessert.  I also had a mug of hot apple cider which put me in the mood to go to bed.

 

2014/09/12 (F) Posted

Linda was up very early to try and beat the morning rush inbound to Detroit from the northwest.  I took an Ibuprofen and went back to bed, finally getting up at 7 AM.  1-800-PACK-RAT was scheduled to pick up the 16 foot long storage container we have had in our driveway for the last two months and I wanted to be up and dressed when they arrived.  I did not have any problems with my teeth overnight.  They felt OK this morning but the upper right was still a bit sensitive to biting pressure.  I had a nice soft banana for breakfast and decided to keep taking the Ibuprofen and Tylenol.

I put a load of laundry in the washer and then ran out to take care of errands.  I stopped at Dunkin Donuts for coffee, Lowe’s for solar salt for the water softener, and then Teeko’s for coffee beans.  Jeff still did not have the Sweet Dreams decaf blend even though he orders it every week.  I got a pound of the Seattle Blend 50/50 regular/decaffeinated, and a pound of regular Brazilian Serra Negra to blend with the decaffeinated beans we already had at home.

Heather, from Root Canal Specialty Associates, called around 9 AM to check on me.  I mentioned the sensitivity and she said that was normal and to keep taking the Ibuprofen/Tylenol through the weekend to counteract any inflammation and/or discomfort.  She wanted to know if I thought the temporary filing was high and making contact before the other teeth.  I wasn’t sure, but she said if it was to call them Monday morning and they would get me in to adjust my bite.

Since I was on the phone anyway I called Bratcher Electric to see about the quote/estimate for the generator service / fuel changeover and the service entrance feed from the transfer switch to the sub-panel to change it into a main panel.  They have been very busy with repairing damage caused by the storms of the last few weeks.  We did not suffer any damage beyond some dead branches breaking off from trees, but south of us folks were hit much harder.  That kind of work always takes priority.

The day was overcast and dreary with morning temps in the mid-40’s and a high of 54, but that was OK; it was a perfect day for sitting at a desk and working on a computer, undistracted by either bad or gorgeous weather.  I did, however, bring my computer upstairs and work at Linda’s desk.  My office is very nice but it is in the basement and it is a bit of a cave.  Sometimes I like that, and sometimes I don’t.  I worked on our blog until early-midafternoon and finally uploaded posts from Aug 2 through Aug 20.

My only interruption was a visit from one of Roese Construction’s field supervisors who was checking on where the runs will go to connect the houses in our neighborhood to the natural gas main.  After looking at our situation he agreed with me and Mel who had looked at this a few weeks ago, that staying to the east of the east entrance to our pull-through driveway made the most sense even through it required them to bore at an angle relative to the main line.  That conversation confirmed that they will be horizontal boring the branch line rather than trenching it in.  He did not give me a firm date, but it sounded like it could be as early as tomorrow (Saturday) and likely by Tuesday next week.

My computer battery was down to under 1 hour of charge remaining, so I took it downstairs and plugged it back in to its power supply.  While I was down there I put another load of laundry in the washing machine.  Back upstairs I made a PB&J sandwich for lunch, along with some green tea.  I got back on the RVillage Mobile development site, played with a few more features, and provided some additional feedback to the development team.  I then worked on this post using my new Logitech Bluetooth keyboard.  The Wacom Bamboo stylus is nice, but the keyboard is the way to go when creating extended text.

Juniper, our female cat, was getting into something in the library so I went to investigate.  She had cornered a yellow jacket and was trying to figure out what to do with it.  I solved the problem for her by capturing it and putting it outside.  I don’t think she was pleased with my solution, but not 20 minutes later she was at it again, and it was another yellow jacket.  We have a nest in the soffit near the library that we need to get rid of, but we have not had a problem with them getting into the house until very recently.  Hopefully that has not changed but I will have to investigate the situation.  It may be that with the onset of cooler temperatures they are finding their way into the library through the recessed ceiling downlight cans.  If so, there’s really no good way to seal those.  Fortunately we can close of the house from the library with a kitchen door and a living room doorwall that includes a screen door.

It started raining very lightly around 4 PM, but never developed into anything.  Linda got home from the bakery at 5:30 PM.  The storage container had not been picked up yet so we called the 1-800 number and left a message with our callback number.  I got a call around 6 PM from the local (Plymouth, MI) office verifying the pickup and address.  The driver arrived around 7:20 PM and had the unit loaded by 7:30 PM.  After he left we headed to dinner at LaMarsa where we had crushed lentil soup and split an order of Koshary and salad.  Even splitting the dish we both ate too much, aided by the fresh-baked pocket bread and garlic spread.   The food and service were both excellent, as always, and the garlic spread was “…the gift that keeps on giving.”

We got back from dinner a little before 9 PM, too late to start any in-depth computer work, but early enough for me to finish this post and for Linda to do some recipe research for Sunday’s brunch.  It seems like only yesterday it was still light at 10 PM at night, but we are approaching the autumnal equinox, and there are noticeably fewer hours of daylight now.

 

2014/09/10 (W) A Functioning Landline

The Ibuprofen/Tylenol mix did the trick and I slept comfortably through the night.  Twinges were just starting as we were waking up, so breakfast was two zucchini muffins, half of a banana, and 800 mg of Ibuprofen, washed down with orange/grapefruit juice.  Linda went for a walk after breakfast as it was supposed to be rainy most of the day.

I spent part of the morning selecting and re-sizing photographs from the Arcadia Bus Rally 2014, uploaded them to a folder in our Dropbox, and e-mailed the link to Brenda Phelan who runs the rally with her husband Bill.  She had put out a request on Facebook for photos if anyone had them.  I did an article for Bus Conversions Magazine on that rally shot over 700 photos, so yeah, I had a few.

I registered us for an RVillage Ambassador webinar later today on the new mobile app, and then came upstairs to have lunch.  We enjoyed the vegan Sloppy Joe’s Linda had made, along with some vegan baked beans (canned) and store bought apple sauce.  It had been raining lightly for a while and the intensity increased while we ate, but it fell straight down with little to no wind.  The radar loop on Wundermap (Weather Underground) showed that we were in the leading edge of a large fetch of moisture that would likely train over our location for several hours and that is, in fact, what happened.

I took a short nap.  I rarely do that, but I always enjoy it when I do.  I worked the rest of the afternoon at my computer editing blog posts and finally getting around to selecting and processing photos to go with some of them.  I had called Kerry Fear this morning regarding snowplowing this winter and he stopped by the house around 3:45 PM to meet with us.  He lives nearby and plows our neighbor’s driveway, which is how we got his name.  We agreed to hire him for the season on a handshake; no contract or pre-payment.  He will send us a bill every now and then and we will pay it.

Linda made creamed corn for dinner and served it alongside vegan Sloppy Joe sandwiches and fresh strawberries.  Again, a soft, easy on the teeth, meal that was very tasty.

The RVillage webinar started at 7 PM EDT and lasted 45 minutes.  They wanted feedback on this latest development by Friday so they can finalize it for general release.  I continued working on photographs for the blog and installed a set of updates on our Linux box before calling it quits for the evening.  Linda had started watching the first episode of Sherlock from last year so I watched most of it with her.  Much to our disappointment Doc Martin has disappeared from Amazon Instant Video as part of our Amazon Prime account.  We can still get it, but we would now have to pay extra.  As much as we like the series we are not going to pay extra to watch it.

It spite of the rain today, we made and received a number of phone calls on our AT&T landline and were online through our DSL connection quite a bit, including streaming the episode of Sherlock, all without noise or service interruptions to the best of our knowledge.  We are hopeful that our AT&T service is finally restored and will continue to operate reliably.

One of the calls was from Chuck letting me know that Matt at Bob’s Speedometer Service had tested his VDO bus speedometer and found it to be broken and not repairable.  Chuck ordered a new one through Matt, who will take care of programming the odometer with the current mileage.  Once it comes in and Chuck verifies that it works I will likely be ordering one for our bus since ours has failed in the same way as Chuck’s.  I could go ahead and remove ours and take it in, but I have lots of other things to work on a figured it made sense to wait and see how this works out for Chuck.

 

2014/09/05 (F) WordPress 4.0

We awoke to temperatures in the low 70’s this morning and by noon it was forecast to be 85 degrees F with rapidly rising humidity.  We turned our A-C on yesterday and left in on overnight and through the day today.

WordPress 4.0 was released yesterday and just before midnight I updated the four websites I manage, including this one.  I was looking forward to working with the new version today, but first things first.  Darryll called at 8:15 AM to make sure it was OK to come over.  We finished breakfast and then opened the garage and moved a few things that might be in his way. Although we would have liked to continue working in the garage during the morning, before it got really hot and humid, we were glad to have Darryll here working on the HVAC installation.

Instead of working on organizing the garage Linda worked at her desk and baked a loaf of bread while I assisted Darryll.  He wired up the library thermostat and showed me how the wires were connected.  He installed the return air grill, which required some minor drywall trimming, and installed a 6″ combustion air duct in the ceiling of the utility closet.  The duct had a screen on one end with a hood, like a dryer vent, and was open on the other end.  He installed it from the attic side with the hood in the attic and the open end sticking down through the ceiling into the closet.  I may decide to caulk or apply drywall compound to fill that gap between the duct and the hole Darryll made in the ceiling.

Darryll’s main focus, however, was hooking up the four pieces of duct, two rigid and two flexible, that will carry conditioned air into the library and installing the two ceiling registers.  That involved working in the attic which was very hot.  The flexible duct for the two ceiling registers was the same kind of product that was used in the main house; a pre-insulated flexible accordion tubing with an 8″ inside diameter that comes in 25′ lengths compressed to about 3′ for shipping.  To feed the two registers on the lower part of the west wall of the library he cut lengths of 8″ diameter (circular cross section) metal duct and assembled them.  He attached them to the supply air duct (plenum) with flange connectors.  He then slide insulation blankets (tubes) around them and connected the bottom ends of the duct into the back of the register ducts using several elbows to bring the duct around and close to the wall.  Finally, he slid the insulation down and secured it.

While Darryll was doing all of that I finished connecting the AC power to the condenser/compressor. That involved the following:

  • removing the terminal cover panel from the inside of the fused disconnect box
  • knocking out access holes on the right side and bottom
  • mounting the fused disconnect box to the side if the house
  • cutting a piece of 3/4″ plastic conduit for the cable from the soffit to the box
  • running the NM cable through the conduit
  • installing a watertight 90 degree elbow into the conduit
  • attaching the elbow to the side of the box
  • cutting, stripping, and connecting the line wires
  • cutting the plastic armor on the hookup cable to the right length
  • installing a straight screw-in watertight connector on the box end of the armor
  • installing a screw-in 90 degree elbow watertight connector on the condenser end
  • cutting, stripping, and connecting the load wires in the box
  • cutting, stripping, and connecting the load wires in the compressor.

I had Darryll check my work and then installed the fuses in the pull-out disconnect but was not able to get it to plug all the way in.  Darryll bent the blades slightly and got it to seat fully.  (I need to get two different fuses.  All he had were 30A fuses but 20A would be sufficient.  Also, the fuses he had in his truck were notched on one end.  I think fuses with full barrels on both ends would be better as they would have more contact surface than the notched ones.)  I reinstalled the terminal cover panel and closed the box.  I then re-installed the cover panel on the A-C compressor that Darryll had removed earlier.

With the power connected and most of the ducts run, we turned on the 120VAC/15A circuit breaker (for the unit in the utility closet) and the 240VAC/20A circuit breaker (for the compressor/condenser).  Darryll turned the thermostat mode switch to “cool” and the fan switch to auto and the A-C came to life.  Hooray!  I love it when that happens.

While Darryll finished installing the ducts and the registers I connected and mounted the thermostat for the garage furnace and then connected the wires on the other end of the cable to the terminals on the back of the unit according to Darryll’s instructions.  I removed the end panel from the Reznor ceiling-mounted garage furnace, removed the documentation packet from the inside, checked that the gas valve was in the “on” position, and put the end panel back on.  I also removed the protective plastic film from the bottom of the unit.

Darryll gathered up his tools, extra parts, and unused materials and loaded them in his truck. He then pressurized his portable air compressor and used it to pressurize the black iron gas pipe.  It has not been holding pressure, so he pumped it up to 15 PSI and we went in search of leaks with a spray bottle of soapy water.  We used my inspection mirror to see behind and under connections and found three leaks.  One was in a 2″ pipe fitting behind the garage, one was in a 2″ pipe fitting near the end of the run by the generator, and one was at an elbow in the 1/2″ pipe where it exits the utility closet on its way to the garage furnace.

Darryll was checking air temperature readings at the registers and in the main plenum of the library HVAC unit.  The library was 89 degrees F when he first turned the A-C on, and the attic was a lot hotter than that.  He connected his gauges to the compressor/condenser and said the readings were close enough to correct that he did not want to add or remove any refrigerant until the room had cooled down and stabilized at the requested temperature.

I was hoping he would get the job finished today but he needed some equipment, which he did not have with him, to work on the iron pipe and he was obviously tired from a long day working in the high heat and humidity.  He may be back tomorrow; if not, Monday or Tuesday. Whenever he returns, I have complete confidence that he will get it done before the gas meter is hung and that it will all work correctly for many years with very little attention other than changing a filter once or twice a year.

We deferred lunch until Darryll left.  We had chickpea salad on a slice of the bread Linda had baked earlier, corn-on-the-cob, and the last of some fresh pineapple.  Nothing says “summer” like organic, non-GMO corn-on-the-cob.

After lunch I called Bratcher Electric to check on the status of the estimate/quote that Mike was putting together to service our generator, convert it to natural gas, and run a 100A Service Entrance Cable from the transfer switch to the garage panel, converting it from a sub-panel to a main panel.  Karen said they have been really busy but he would work on it over the weekend.

I also called 1-800-Pack-Rat to arrange pickup of the storage container on Friday September 12th.  Steven was not able to schedule the pick-up during the call and said he would contact the local office and get back to me.  I made it clear that we did not want to roll over into another billing cycle and I was calling one week ahead of time as we had been instructed.  He assured me that it would not be a problem.  About an hour later we got a return call and follow up e-mail confirming pickup for Friday, September 12.

Late afternoon I checked on the library A-C to make sure it was not freezing up.  Everything looked OK.  The thermostat was set to 76 degrees F and the temperature was down to 77, so I bumped the setting up to 78 to let it cycle off and on.  Although Darryll did all of the heavy lifting on this project (literally) I spent my fair share of time in the attic on warm days installing the pull-down folding ladder and working on electrical wiring and attic lights.  It was very gratifying to see that all of this work—his, mine, and Linda’s—finally result in something that operated correctly.

We were relaxing and reading when severe weather watches and warnings for our area started arriving on our iPads.  Naturally we went outside to see what was going on.  We were both born and raised in the Midwest, the St. Louis, Missouri area, to be exact, and as kids in the 1950’s, threatening weather was a form of summertime entertainment.  Not that we were stupid; we learned from the adults around us when the show was over and it was time to head to the basement.  When I was about 5 years old we lost a plum tree in our backyard to a close encounter with a tornado.

The gathering storm.  The clouds were very dramatic in all directions.

The gathering storm. The clouds were very dramatic in all directions.

The clouds were very dramatic but eventually gave way to a formless mass of gray with swirling winds and a few raindrops.  We checked the Weather Channel app and the Weather Underground Wundermap app on our iPads.  The radar returns showed that we were likely in for some rain, and we got some, but as often happens the worst of it passed north and south of us.  The rain we did get was very welcomed.  We had heavy rain on Monday (Labor Day), Keith mowed the grass on Tuesday, I spread grass seed around on Tuesday and Wednesday, and a flock of six wild turkeys feasted on the grass seed on Wednesday and Thursday. We needed a nice light rain to help the seeds germinate and take root rather than be eaten or washed away in a thunderstorm.

Storm clouds looking east.

Storm clouds looking east.

Around 7:30 PM our power flickered several times and we received e-mail messages from our generator letting us know that utility power had been lost and then quickly regained.  We decided to check the Kohler OnCue software to see what the generator was doing.  We thought sure we had installed the software on Linda’s computer, so we could monitor it from her desk in the kitchen/dining area, but it wasn’t there.  After much searching and head scratching we checked my old laptop and there it was!  When we thought about it we realized that the generator had been installed about a week before Linda started configuring her new Samsung laptop, so there was no way we had put the software on her machine.  We’ve been very, very busy the last 20 months, so it was not surprising to us that we had forgotten the exact sequence of events.

20140905-08295

Approaching from the southwest the clouds got more ominous.

The severe warnings expired at 8 PM and the severe watches at 9 PM, but that did not mean the rain was done.  A big fetch of moisture was located south of Chicago, Illinois and moving through southwest Michigan in our general direction.  The rain was forecast to continue into the early hours of tomorrow but be done before sunrise.  When the rains finally came it rained hard for a while.  Tomorrow is forecast to be a perfect Michigan day and I plan to buy another bag of grass seed to spot seed the areas that got washed away, again.

 

2014/09/04 (R) More Organized

Darryll did not call last night so we knew he would not be here today. That gave us another day to work in the garage.  We moved things around, cleaned, sorted through stuff, decided what to re-store, and where, and what to add to various disposal collections.  We are pretty sure the old window A-C unit is going to our son’s house, so we loaded it in the Honda Element, which got it out of the garage.  Linda also loaded some old video and satellite TV electronics in the car to take to Recycle Livingston tomorrow.

We were making good progress and decided to stick with it and then have a slightly later lunch.  We removed all of the doors from some old kitchen cabinets, upper and lower, in the northwest corner of the garage.  We plan to eventually remove these cabinets, but not this year.  Without the doors we will be able to see what is stored in them, or at least that something is stored in them.  We moved a set of small parts bins and a bookcase which allowed us to reposition two work benches.  That, in turn, allowed us to move the radial arm saw and finally set the saw on the base and secure it.  It is now in a place where I could use it if needed, if it had power.  It requires a 240VAC/15A outlet.  I bought and installed a 30A double pole breaker in anticipation of this, so I will have to get a 15A breaker instead.

The weather forecast for today and tomorrow was for warm temperatures becoming hot with increasing humidity and chances for rain.  We closed the house up at lunch time and turned on the A-C.  We have hardly used it this summer, but have appreciated having in on those few sultry days.

We watched our current resident flock of wild turkeys—three adults and three young that have been in the area for a few weeks now—forage in our back yard while we ate lunch.  After lunch Linda decided to make banana bread as we had several bananas that did not get eaten fast enough.  She was researching dinner recipes when I went to my office to work on computer tasks.  Except for a dinner break, I worked late into the evening on the following:

  • Cleaning up (filing or deleting) e-mails
  • SLAARC Website user maintenance
  • Updating WordPress websites (ver 4.0 was just released)
  • Social media sites (RVillage, Facebook, Linked-In)
  • Editing daily blog posts
  • Off-loading digital photographs
  • Organizing photo storage

BTW:  Dinner was a new dish, a pineapple quinoa stir-fry with cashews, ginger, scallions, a little bit of hot peppers, and several spices/seasonings including fresh basil that Linda has been growing in the northwest corner of the kitchen where there is good light. It was excellent.

 

2014/09/03 (W) Pine Cone Midden

After breakfast Linda downloaded the Hanks Writer to her iPad2 while I downloaded three app updates to mine.  After checking in on the blogs that I follow, I spread some grass seed around the bare and thin spots in the back and west side of the yard by the house.  I wanted to take care of that while it was cool and the ground was still damp with dew from the overnight lows in the upper 50’s.

Darryll did not call last night, so I did not expect him to be here today.  Our son might be interested in the old window air-conditioner so we moved it to the southeast corner of the garage and plugged it in to make sure it worked.  It did, so I sent him a text message to that effect.

We cleared off the table we have been using to cut drywall and got the 1/4″ birch plywood panel that will be the front of the box that encloses the electrical sub-panel and cables.  We measured carefully, twice, laid out the cut lines, and checked the measurements again.  We got the center cutout very close to correct on the first try and only had to trim it a little bit in one corner to get it to fit around the panel box.  We did not secure it place as we still need to feed the thermostat cable through the wall and put some insulation in the wall cavity to the left of the panel as this is an outside wall.

With the carpentry work done we started cleaning and reorganizing the garage, making sure that Darryll will still have access to things he needs to work on.  We plan to have the storage pod picked up on the 12th or 13th, so even though Darryll is not quite finished, we were anxious to start working on the rest of the garage.

We moved the tools and supplies we’ve been using to the three new shelving units on the east wall of the garage.  We then unloaded two shorter units and two tall units on the west wall and spread everything out on the floor.  We moved the units to the northeast wall, the shorter ones fitting nicely under the low end of the flue where it exits the utility closet wall.  We went through the stuff on the floor and put some of it in the trash, set some of it aside to recycle, designated a few things to go to the Salvation Army, collected RV parts in boxes to take to the GLCC Surplus and Salvage rally next month, and put the rest back on the shelves.

We took a break for lunch and then finished up in the garage for the day.  Linda worked at her desk and I changed out of my construction clothes into something more suitable for working at my desk.  She made marinated baked tofu cubes for dinner, with sautéed green beans and corn-on-the-cob (organic and non-GMO, of course).  We sat on the deck and watched our resident American Red Squirrel gather pine cones and move them under the cluster of three big fir trees where we presume it has a nest and pine cone midden.  These trees have never been trimmed and the lower branches are sizable and long and the ends rest on the ground.  I peeked in there the other day but did not see pine cones piled around any of the trunks like I expected, so I’m not sure where the midden is located.

I was up later than I should have been but I finished reading Big Lake Scandal.  The fifth book in Nick Russell’s Big Lake murder mystery series, it was a good read.  Nick has created an interesting place with interesting characters and reveals a little more about them with each volume.  He is particularly good at capturing the way people might actually talk to one another on a daily basis in a small western town.  He should know; he has spent a lot of time in such places over the years.

 

2014/09/02 (T) No More Painting

After breakfast Linda worked on the financial and membership records for our GLCC RV chapter and I took care of a couple of e-mails.  Keith showed up to cut the grass, which he managed to do in spite of the wet conditions from yesterday’s heavy rains.  After chatting with Keith for a few minutes I started to resume work on “the project” but decided to look for the tub of grass seed and fertilizer we brought from the old house.  I found it rather quickly and we still had a partial bag of grass seed, so I spread it around the front yard by hand filling in the bare and thin spots, of which there were plenty.  Our flock of wild turkeys was back today.  I think they like the grass seed I put out for them.

Wild turkeys gather in and around the fire pit.  No...we do plan to cook them.

Wild turkeys gather in and around the fire pit. No…we do not plan to cook them.

I sanded the drywall compound in the library and applied another thin layer.  I’ve been applying non-overlapping horizontal strips of mud, letting them dry, sanding them smooth while feathering the edges, then repeating the process for the areas in-between, or outside, the previous strips.  I will eventually turn this 90 degrees and apply the strips vertically.  The last set of steps will be to fill around the outside of the opening, feathering everything back to the existing wall surface and sanding it smooth with the central part of the patch.  We don’t want it to be obvious that there was ever a hole in the wall.  Once the drywall patching is done I have to prime the new compound and then paint the entire wall.

The paint on the east wall of the garage and the outside of the utility closet looked good and the paint on the inside of the utility closet looked good enough; it is, after all, the inside of a furnace closet.  I was done painting, at least for now, which should have felt like a big deal, but it just meant I could wrap up a couple of things and move on to the next thing.

The first thing was to mount the electrical box on the wall to the left of the library HVAC unit, make all the wiring connections, screw the switch into the box, and put on the cover plate.  I routed the thermostat wire alongside, and zip-tied it to, the armored AC power cable.  The second thing was preparing the mounting holes for the garage furnace thermostat on the outside of the utility closet wall.  I then cut the thermostat cable to the correct length beyond the wall, removed the outer sheath, stripped the ends of the wires, and secured the cable with a zip tie to prevent it from slipping back into the wall.  I did not actually mount the thermostat, however, since I was going to wait for Darryll to connect the wires.

Three adults and three young.  They are large and impressive birds.

Three adults and three young. They are large and impressive birds.

By then it was time for lunch, after which Linda left for her dentist appointment in Dearborn.  I wanted something easy to do, so I assembled the three plastic shelving units I bought at Lowe’s yesterday.  They went together easily, but one was missing the feet, top caps, and wall brackets and another one had a defective top cap.  I put them against the east wall of the garage and the floor was flat enough that they lined up well, so I don’t necessarily need the feet.  But the top caps are important, and it bugs me that I did not get everything I paid for.

The next thing I decided to tackle was the wood box in the utility closet that will enclose the electrical sub-panel and make it appear to be recessed and hide all of the electrical cables.  I cleared off the table we have been using to work on sheets of drywall and stood the scrap pieces of drywall against the back wall.  I got the two 8-foot 1×10’s I bought yesterday, put them on the table, made careful measurements and then marked them.  The two side pieces needed to be 52″ long x 7-1/4″ wide, with notches to create clearance for the top plate, horizontal blocking, and electrical cables passing through holes in studs.  I cut them to length with the Rockwell circular saw, and then ripped them to width using the Craftsman band saw.  The band saw had not been used in years but it had no problem ripping each board.  The notches were made with our Porter-Cable saber saw.  This kind of work is a pleasure when you have the right tools.

I screwed the two side pieces into place and then measured and cut a bottom cross member, and a trim strip to go below it, and installed those with screws.  I then cut a top cross member and a backing strip to go behind it between the two side pieces.  When I was done I had a box that would support a 48″ high by 33″ wide 1/4″ thick plywood panel with the outside face flush with the front edge of the sub-panel once I cut a rectangular opening in the plywood to allow it to fit around the box.  The plywood panel will be secured around the edges with a few screws and the sub-panel cover plate will overlap and cover any gap between the panel box and the opening in the plywood.  I will finish the plywood panel tomorrow or Thursday depending on when Darryll returns and how much I have to work with him to get the power connected to the new A-C compressor.

Jasper the cat in the kitty tent on the deck.  He spends a lot time looking around and sniffing the air when he is out here.

Jasper the cat in the kitty tent on the deck. He spends a lot time looking around and sniffing the air when he is out here.

That was the end of my project work for the day so I took a shower and put on some clean clothes.  Linda poured a couple glasses of wine and we sat on the deck and enjoyed an absolutely beautiful late summer Michigan evening.  We brought the kitty tent out so Jasper could sit outside with us.  Linda threw a green salad together, followed by the leftovers of the penne pasta dish and Italian bread she made for dinner on Saturday.  As twilight set in we moved inside and I decided to go to Lowe’s for some grass seed.  I figured if the soil was still moist first thing tomorrow morning I would spread it around the bare and thin areas in the back and on the west side of the garage, of which there are plenty. Otherwise I will wait until just after the next rain.

I started reading Big Lake Scandal last night and continued with it this evening.  It’s the 5th and latest book in the Big Lake murder mystery series by full-time RVer Nick Russell.  Nick is a good writer, but he and his wife, Terry, are personal acquaintances, which makes reading his books that much more fun.

 

2014/09/01 (M) A Day To Labor

One of the odd things about being “retired” is that holidays, like weekends, do not have the same significance they had when we were employed full time.  We no longer have “3-day weekends.”  We also do not have a tradition in our family of gathering on the summer holidays, so those days tend to blend into the days around them.  If not for our Saturday morning ham radio breakfast and the Sunday morning Howell Farmers Market we probably would not know what day of the week it was.

Knowing that today was Labor Day, Linda prepared vegan cinnamon rolls yesterday and baked them first thing this morning.  This was the first time she has made these and they were a real treat. Vegan, yes; whole plant-based food, not exactly.  These will be a rare treat for us.

As has been my pattern for the last few weeks, I sanded and touched up drywall first thing after breakfast.  Most of the drywall compound was finally smooth enough that I felt it was ready to prime.  I discovered that I was out of primer, so I went to Lowe’s to get some and picked up a few other things while I was there.  It was very humid today, which tends to slow the drying of paint, but primer is thinner than paint and gets absorbed into the paper drywall covering   I was hopeful that I might get a first coat of paint applied this evening.

Mike (W8XH) sent an e-mail Saturday evening to the members of the SLAARC announcing the availability of the new WordPress website and indicating that they would each be receiving a unique username and password from me in the next few days.  I wanted to wait at least 24 hours before I started creating users.  That waiting period had passed, so today I parked myself in front of my computer and registered users.

Part of the registration process required me to create a username.  That was easy for a ham radio club as (almost) everyone has an FCC call sign.  It also required a valid/unique e-mail address.  When I created an account an e-mail, with their username and a randomly generated password, got sent to the e-mail address I entered.  The e-mail also contained instructions on how to get to the website, how to login, and how to change their password.  I finished creating the last user account around 9 PM, but I did not work on this between 5 PM and 8 PM.

The vegan cinnamon rolls made for a filing and somewhat higher calorie breakfast, so we skipped lunch today and had an early dinner.  I had requested a picnic type of meal to celebrate the end of the summer tourist season, and Linda fixed a nice one.  We had vegan potato salad, corn-on-the-cob, and pan-grilled tofu slices with BBQ sauce and caramelized onions served open-faced on some of the Italian bread she made for dinner on Saturday.  Dessert was watermelon balls.  And the wonderful thing is that I am maintaining a good weight.  Eating well and eating healthy are not mutually exclusive.  However, like low-fat and fat-free foods, and then gluten-free foods, the processed food industry has discovered a “market” for foods that are free of animal products.  That, however, does not mean they are free of unpronounceable chemicals or excessive amounts of sugar and salt.  There is a growing amount of vegan junk food available in the marketplace.

We spent a little time after dinner on the back deck watching wildlife as a storm front approached from the west.  As the wind kicked up we lost our AT&T DSL connection and then our phone went out, exhibiting the same behavior we have had throughout most of August.  I shut down my computer and changed back into my work clothes to do some painting.  I put a coat of paint on the east wall of the garage and both the inside and outside of the utility closet.  It started raining really hard so I had to close the garage door, which cut down on my light, but eventually the rain let up and I was able to open the garage doors again.  The inside of the utility closet may need another coat, but I think that most of the outside of the closet, and the east wall of the garage, may be done.  That means I can finally mount the thermostat for the garage furnace and put cover plates back on switches and outlets.

I am still working on the outside of the south wall of the utility closet (with the door).  I am using drywall compound to create a smooth transition at the hinge edge of the door to correct for a carpentry error I made when installing the door much earlier in the project.  The transition will make it possible for me to install trim around the door, but I have to build up the transition in thin, tapered layers, allow it to dry, sand it smooth, and repeat the process over, and over, and over.  Ditto for the west wall of the library, which is the other side of the east wall of the garage, where I am building up a slightly recessed area where the opening was for the old window A-C unit so it will blend in with the surrounding wall surface.

2014/08/31(N) By Any Other Name

My first task after breakfast was to sand drywall compound and apply the next coat where needed.  I’m down to touch up work in most spots and so I am trying to apply very thin layers with feathered edges that will dry quickly and require minimal sanding.  The old A-C opening in the library, however, is taking many, many overlapping layers.  Fortunately I can finish that at my leisure as Darryll is not working in that location.  Since he just this week installed the two pieces of duct in the lower part of the wall between the garage and the library I am still building up drywall compound to fill the irregular and, in places, large gaps on the garage side.  Unfortunately, the thicker compound takes longer to dry and watching drywall compound dry is worse than watching paint dry as it’s even slower.  The trick is to have something else to do while I wait.  Fortunately, I have lots to do.

I had some e-mail correspondence on Friday with the publisher of Bus Conversion Magazine, Gary Hall, whose name turns out to actually be Gary Hatt.  He had his reasons for not using his real name when he first took over BCM, which he explained and which made good sense.  BCM is running my article on Suncoast Designers in the August 2014 issue and he sent me a Dropbox link to the draft.  It looks like another really good issue, but is again coming out a month late.  Ever since the editor had a minor heart attack in early May they have been a month behind.  It appears that they will be doing an article on spin-on oil filters in the October issue and will also use my article on the Spinner II centrifugal oil cleaner that Joe and I installed a year and half ago.  I only have one other article ready for them to use, so I guess I need to get busy and write some new ones.

When I am not working on the house, the yard, or the bus, there’s always computer work to be done.  I have multiple projects to work on, but I also like to relax on a pleasant day and catch up on reading the blogs and RV magazines that I follow.  It was very pleasant today so we turned off the air-conditioning, opened up the house, and sat on the back deck reading and watching wildlife.  I addition to our resident American Red Squirrel we were treated to a visit by three Sandhill Cranes.  The squirrel has been busy for most of the month harvesting and stockpiling pine cones in what we presume is a midden under a cluster of very large fir trees northwest of the house.  The cranes spent a long time wandering around the back yard foraging.  We sat quietly and watched them and they came closer to the house than usual so we got a very good look at them.  They are large and magnificent.

I finally decided to continue editing the rough drafts of my blog posts for this month and get them ready to upload.  I still need to select photographs to go with some of the posts, or to put in separate gallery posts, but I finally uploaded the tree photos I took on the 21st to our Dropbox and e-mailed the link to Paul at Detroit Tree Recycling.

I spent some time online searching for sources of supply for an ignition coil for our Aqua-Hot diesel-fired hydronic heating system.  I can get one from Darin, but he quoted me MSRP and it is an expensive part.  I wasn’t having much luck so I called Butch mid-evening to discuss the situation.  He suggested that I hold off on getting a new ignition coil until I got the coach to his place and we were able to look at it more carefully.  He said I should have had white smoke and a definite smell from the atomized but unburned diesel fuel.  I didn’t which made him wonder if the problem might be fuel delivery rather than ignition spark.  Good advice, as always.  I don’t know enough about the control circuitry on the Aqua-Hot (it’s actually a Webasto inside) to know how the operation of the spark and fuel solenoid might be intertwined.  I have the manuals, but I have not had time to dig into them.  Besides, I have enough other things to work on right now that I am willing to let this one go for a few more weeks.

 

2014/08/30 (S) By All Accounts

We went to the weekly SLAARC breakfast this morning.  We stopped on the way back to the house to get a food processor.  I shut down my ASUS laptop PC, packed it for travel, and headed for Mike’s (W8XH) QTH; the first time it has been out of the house since I bought it at the end of April.

I worked with Mike on the new SLAARC WordPress website, walking him back through the process of creating photo galleries.  He then uploaded pictures from the 2014 Field Day event, added captions to some of them, and created photo galleries.

I was going to create user accounts, but that turned out to still be a bit premature.  In showing Mike around the site we discovered that the home page login widget for the WP-Members plug-in was not working correctly.  It was last night, but that was before I installed the Global Hide Admin Toolbar plug-in.  Suspecting a minor incompatibility (although the site did not crash, thank goodness) I had to engineer a work-around.  The problem and solution turned out to be multifaceted.

One aspect of the problem was that we needed to remove the WP-Members widget from the Home screen, but it was the only place where a logged in user could log out.  Another aspect of the problem was the realization that users would have to click on one of the pages in the Member Only Area to get a login screen that would actually log them into the site and allow them to navigate wherever they wanted.

One facet of the solution was to create a new page that would appear at the right hand end of the main menu bar and place the WP-Members widget on that page.  It was not immediately obvious to me how to do this, or if we even could, but I eventually figured it out.  That provided something on the main menu bar, which remains visible at all times, where users can go to logout.  (They should also be able to log in there, but it’s the same widget that didn’t work correctly on the Home page.)

The other facets of the solution involved editing the e-mail that gets sent to a new user when their account is created and editing the User’s Guide, both of which describe the login and logout procedure.  As long as I had to create and upload a new version of the User’s a Guide, I decided to put the link on its own page so it would show up in the menu structure and be easier for members to find.  I did the same thing with the links to the official club roster documents.  Adding those two page then required me to edit two pages to remove the old links.  As the saying goes “it’s a process.”

Mike was still creating photo galleries so I drafted a notification e-mail for him to send to the members and sent it to him.  He had to leave to run an errand right after I left and planned to deal with sending the e-mail later that evening.  I will wait at least 24 hours after he sends it before I start creating user accounts.

I was back home in time to relax and work on this post before John and Diane arrived around 5 PM to visit and have dinner.  They brought a salad that Diane made and two bottles of wine; a sweet Shiraz that was unusual but delightful, and a more traditional Cabernet Sauvignon.  Linda made a penne pasta with sun-dried tomatoes and mushrooms, and made Italian bread from scratch.  She also made the chilled no-bake double chocolate torte for dessert.  It was so good everyone had a second piece.

Diane now has an iPad Mini and Linda spent time with her after dinner helping her configure some things.  They also managed to get connected through the iMessage feature.  Storms rolled in around 9 PM and we had brief periods of heavy rain and diffuse lightning all around.  There was a lull in the weather just before 11 PM so they gathered up their things and hit the road.  I cleared the table and Linda loaded the dishwasher.  She started it and then we were off to bed, tired from a long but very satisfying day.

 

2014/08/29 (F) Sand Mud Press

Before breakfast this morning I tried to start the Aqua-Hot (hydronic heating system) in our converted coach, but the burner would not ignite.  We had the same problem back on June 9th when Darin Hathaway of Hydronic Heating Specialists serviced the unit while we were at Elkhart Campground waiting to go to the GLAMARAMA rally in Goshen.  Darin suspected a bad coil but managed to jiggle a few wires and got it to work.  It started several times in a row, so we decided not to spend the money for a new coil at that time.  I hoped then the decision wasn’t a mistake, but it looks like perhaps it was.  I will try to find some time over the next few days to jiggle some more wires and see if anything comes of it.  I recall Darin saying the ignition coils were expensive, so I don’t want to replace ours if it is not actually broken.

For breakfast we had some of the vegan muffins that Linda made yesterday.  They were yummy.  We took a little time to revisit our options for a white, free-standing, double oven, 5-burner, gas range with a convection feature in at least one of the ovens but did not come to any decision regarding purchasing a new one.  Linda made a grocery list and then went to the Howell library to see what Consumer’s Reports had to say about gas ranges before stopping at Meijer’s.

While Linda was gone I placed follow-up calls to Heights Tower Systems and Bratcher Electric to check on the status of their pending quotes and then e-mailed Darin about the Aqua-Hot.  I then got to work in the garage and library working on the drywall.  I sanded all the drywall compound (mud) I had applied yesterday and added the next layer to the places that needed it.  Patching the library side of the opening where the window A-C was installed has proven to be particularly challenging, or at least tedious.  The new piece of drywall is recessed slightly compared to the original wall surface surrounding it, so I have been building up layers of drywall compound to “fill the hole.”  It has taken many passes so far and it is going to take quite a few more before it’s done.

I finished up for the day, cleaned up the tools, and changed out of my work clothes.  Rather than spend a lot of time at the library, Linda photographed the relevant pages of recent issues of Consumer’s Reports with her iPad so we could study them at home.  What we got from the reviews was that LG, GE, Electrolux, and Samsung are making good gas ranges while Kitchen Aide, and Jenn-Air are best avoided.  Lowe’s, Home Depot, and Best Buy all carry LG, GE, and Samsung appliances, so we have a choice of local dealers.  While we were pondering all of this over lunch a group of wild turkeys came through the back yard several times foraging for food.  There were three large adults and three much smaller birds, obviously this year’s brood.

I spent most of the rest of the day working at my desk getting the SLAARC WordPress website to the point where I was comfortable creating user accounts.  I had hoped to have user accounts set up by August 13th, but that did not happen.  One reason for the delay was that I was trying to find a way to automatically e-mail each user as I created their account.  It took me a while, but I figured out how to do this with the WP-Members plug-in.  I also found a plug-in that hides the WordPress Toolbar from users based on their WordPress user role.  In this case I was only concerned about users with the Subscriber role but the plug-in allows me to control all defined user roles.  I did a final edit of the User’s Guide, uploaded it to the private Members Only Area of the website, and e-mailed Mike (W8XH) and Larry (K8UT) that the site was ready to go.  Our DSL connection was pretty good most of the day but got flaky for a while during the evening.  The phone continued to be unusable with loud noise masking weak audio.  So far AT&T’s response to our MPSC complaint has been a phone call and e-mail from someone in the “Office of the President.”  Impressed?  I’m not.

 

2014/08/28 (R) This And That

I put in a full day working on our garage project while Linda put in a full day working on this and that.  She baked vegan muffins, made vegan rice pudding, worked at her computer on bills, banking, and RV club financial records, and helped me in the garage with drywall installation.

My first task was sanding down drywall compound from yesterday and then adding more in certain places.  I then measured, marked, and cut the drywall for the inside of the new utility closet.  Linda helped me install it.  We had to cut one piece in half lengthwise in order to get it into position.  I also had to drill a hole for the garage furnace thermostat cable and push it out through the utility closet wall.  Once all of the pieces were secured with drywall screws I applied self-adhesive fiberglass tape to the seams and then applied drywall compound to the seams and screw dimples.

Jasper doing his cat thing.

Jasper doing his cat thing.

Since I could not sand, prime, or paint until the drywall compound was dry I worked on some loose electrical ends.  I installed a saddle connector in the side of the library HVAC for the armored AC power cable and a cable strain relief for the thermostat cable and A-C compressor control wires.  Darryll had already installed these cables through the gas pipe hole, so I made a diagram of how they were connected, uninstalled them, re-routed them through the strain relief, and reconnected them.  I prepped the AC power cable, partially installed the switch in the surface mount electrical box, and connected the armored cable to the saddle connector.  The final AC power connections for the library HVAC unit will have to wait until the drywall is finished and the surface mount junction/switch box is installed.

I mounted the library thermostat on the wall above the air return but did not connect the wires.  The color coding of the wires in the thermostat cable does not exactly match the labeling of the terminals and the instructions were less than clear, so I thought it best to leave this for Darryll.  I removed the side panel from the Reznor garage furnace and made the AC power connections.  I did not, however, connect the thermostat wires and I left the documentation packet inside the unit.

After dinner I checked e-mail and edited a half dozen blog pages before turning in for the night.

 

2014/08/25 (M) AT&T and the MPSC

I was scheduled to participate in a meeting of the FMCA Education Committee at 4 PM today but it got rescheduled to Monday, September 8, same time.  That was a welcomed change of plans which allowed me to concentrate on our construction project.

Roese Construction, the contractor for Consumer’s Energy, is still working along our street.  The main gas lines are run.  They are now digging the connection trenches, fusing the sections of pipe together, and filling the trenches back in.  We heard them working at the west end of our property and walked down to see what they were doing and take a few photographs.  A large backhoe was just starting to fill a trench at the northwest corner of our yard where two pieces of main line were joined with a branch line going to the cul-du-sac to the west.  There was a lot of water in that trench and it looked like a (muddy) lap pool.  The surface of the water was only about two feet below the surface of the ground.  I asked the backhoe operator if that was ground water and he said it was.  The northwest corner of our property is a low spot that forms small ponds around many of the trees when it rains, and stays wet for a very long time even after the surface water disappears.

We spent the morning and afternoon sanding drywall compound and touching up a few spots.  While the compound was drying I worked on electrical tasks and Linda worked in the kitchen and did some weeding in the beds around the house.  Somewhere in the middle of all that we put all of the sections of the ham radio tower back on the middle deck, had lunch, and made a trip to Lowe’s for a light switch and various cover plates.  I also picked up an 18″ x 28″ sheet of 1/4″ thick Plexiglas to use as a temporary replacement for the fogged window in the bus when I finally get around to removing it to have it repaired.

Our AT&T phone and DSL service is worse than useless at the moment.  After three un-returned phone calls to both the technician (who gave us his number and said to call him directly if the problem re-occurred within 30 days) and the infrastructure manager for this area (whose name and number we got from the technician) we were fed up, so we filed a complaint with the Michigan Public Service Commission.  About four hours later we got a call from a women who claimed to be from the Office of the President of AT&T letting me know that she was in receipt of our commission filing and that she would be coordinating the “investigation and service repair process.”  The audio level was low and the noise on the line was high, so I could barely hear her and said so.  Apparently she heard the noise too, so at least she knew we were not making this up.  She e-mailed us shortly thereafter with her name and contact information.  That’s a start, but what we really want is the clean, reliable signal that we pay for.

There are things I can do, and need to do, at my computer that do not require me to be online, such as editing the rough drafts of blog posts and selecting/post-processing photographs.  The last post I uploaded to our blog was for August 1st, so I am once again almost four weeks behind.  I needed to finish processing the tree photos from last Thursday, put them in a Dropbox folder, and e-mail the link to Paul at Detroit Tree Recycling, but I did not get that done either.  When I wasn’t eating or driving back and forth to Lowe’s I was working in the garage.

Speaking of food, Linda made stuffed mushrooms for dinner and served them with a side of grilled asparagus.  Both were very tasty.  After dinner I gave the east wall of the garage a final sanding and then worked on the utility closet wall while Linda vacuumed up the dust.  I wiped down the wall with a barely damp sponge and applied a coat of Zinzer primer.  It should be dry enough to paint in the morning.

I drove back to Lowe’s to return a couple of incorrect cover plates I had purchased earlier in the day and get the correct ones.  I picked up another gallon of paint while I was there to make sure I had enough on hand for tomorrow.  On the way home I had a nice QSO (ham radio contact or chat) with Mike (W8XH).  Ham radio is fun and we have yet to get involved in making long distance (DX) contacts with folks all over the world on the HF (high frequency) bands.  Getting our tower up with some HF antennas on it will help a lot.

 

20140821 (R) Words With Friends

With a dry morning on tap I took care of chores after breakfast while Linda worked on preparations for dinner.  First I photographed trees around our entire property that were dead or obviously distressed and not doing well.  Next I took all of the sections of our Heights aluminum tower off of the back deck, where they have been stored since we bought it in May, and laid them out in the yard in the order in which they go together.  I then photographed all of the pieces, including details of how they interconnect, along with the fold-over assembly, fold-over motor, and bearing plate.

Thrust bearing plate for ham radio tower.

Thrust bearing plate for ham radio tower.

I transferred the photos to my computer and then processed a selection of the tower photos, resizing and sharpening them.  I put them in a folder in my Dropbox and e-mailed the link to Heights Tower Systems along with a description of what we have, what we intend to do, and what we think we need to do it.  I also gave them the name of the amateur radio operator we bought the tower from.  He was the original owner.

20140821-07952

The gear-motor for the fold-over mount. Mast rotor in the plastic bag to the right.

Fold-over mount standing up on hinge end.

Fold-over mount standing up on hinge end.

 

 

One meaning of having “words with friends” suggests that they might not be your friends anymore, but in this case it’s the name of an online game from Hasbro that Linda plays with Karen Limkemann.  Karen and Steve came to visit this today and arrived around 3:30 PM.  We all talked for an hour and then Steve and I went to my office to look at our Linux computer while Linda started pulling dinner together.

 

 

 

Ham radio tower sections laid out in the yard end-to-end.

Ham radio tower sections laid out in the yard end-to-end.

Linda spent much of yesterday and this morning preparing this meal.  She made a salad dressing from scratch, crushed red lentil soup from scratch, pita bread from scratch, mixed up a small batch of garlic butter, and made Koshary from scratch.  We had a semi-dry white wine from Leelanau Cellars with the meal, and red grapes for dessert.  The meal was truly outstanding.

Heights Tower Systems aluminum tower sections laid out in the yard.

Heights Tower Systems aluminum tower sections laid out in the yard.

After dinner we took a stroll around the property and showed them the landscaping work, the (disassembled) ham tower, the proposed location of the barn, and the natural gas and HVAC projects.  Back at the house we discussed past travels and future plans at some length before they needed to head for home.

 

2014/08/20 (W) Like A Well-Oiled Clock

Darryll and Alec (DCM Heating & Cooling) were back today to continue working on the garage and library HVAC project.  I was talking to them as they unloaded tools and materials when I got a call back from Paul Keech.

Paul has changed the name of his company from Paul’s Tree Service to Detroit Tree Recycling and is also running American Mulch.  As I was told yesterday he is trying to focus on tree removal, especially wood lots with multiple trees, rather than tree trimming.  Among other reasons, the trees he removes provides the raw material for his mulch business.  Also, the guy who did most of his climbing the last ten years has moved on to another job and it’s hard for Paul to run a business when he’s up in a tree, even with a cell phone.  I tried to describe the trimming and removal work we need done but in the end we agreed that I would take some photos, put them in a Dropbox folder, and e-mail him the link.  He also encouraged me to get a couple of quotes from some companies more local to our new location.

While I was talking to Paul, Darryll found a small leak in the reducer at the T-fitting behind the garage and tightened it.  The pipe out of this reducer will bring gas into the garage and was the last piece of pipe they worked on the last time they were here.  Alec reset the pressure to 12 PSI and it appears to be holding better than it has up to this point.

In the course of the day, they…

  • …finished setting the Library furnace/air-conditioner and connected the parts together.
  • …cut the hole for the return air register and installed the return air duct.
  • …ran the supply air ducting from the top of the unit along top of the ceiling, over the top of the utility closet door, and then angled it to run along east wall at the ceiling.  All of the duct outside the closet is insulated.  Two flexible ducts will come off the top and run through the attic to supply air through ceiling registers on the east end of the library.
  • …marked the location for the two registers that will be at the bottom of two rigid ducts running down the east garage wall to supply air to the library just above the baseboard heat radiators.
  • …removed the old library window A-C unit and covered the hole with cardboard.  We will have to patch the opening on both sides with drywall and paint it.
  • …shut off the propane to the old library wall-hung space heater, removed the unit, capped the line (iron pipe), turned the gas back on and checked for leaks.
  • …connected the double-walled flue pipe for the library furnace.
  • …connected the double-walled flue pipe for the garage furnace.
  • …ran the 1/2″ iron pipe for the gas supply to the garage furnace.

They will take care of the air-conditioner condenser/compressor installation on a subsequent visit.  In the meantime I need to install electrical junction boxes for the two furnaces, which must have switches located within three feet of each unit.  I also need to run new 12 AWG 2+g NM cable for old A-C condenser/compressor and repurpose the existing A-C condenser/compressor wiring as an outside 120 VAC / 15 Amp outlet.

We still needed to repair drywall in the library and upper east garage wall and install new drywall on the lower east wall of the garage and on the new utility closet walls.  The lower half of the east garage wall is the next thing I have to do as I need to have it done before he comes back to finish the duct work.

I got a call from Chuck Spera just before noon letting me know that he was headed to his shop to pick up his old VDO bus tachometer and take it to Bob’s Speedometer Service on Bergin Road.  Bergin is an east-west road about one mile north of our house.  Bob’s was over at Old US-23, less than five minutes away.  I met Chuck there at 12:30 PM and we met with Matt who handles their VDO instrument repairs.  He tested Chuck’s tach and pronounced it broken but probably repairable, so Chuck decided to leave it there.

Matt did confirm for us that both the tachometer and the speedometer take a square wave input signal in the 3 – 5 volt range with deflection of the needle proportional to the frequency of the waveform.  Presumably this same signal regulates the speed of a motor that drives the gears of the odometer.  I had discussed this very situation with Mike (W8XH) just last night and he is willing to bring his 100MHz 2-channel storage oscilloscope and help us look for and trace these signals if needed.  Once we have known good gauges installed knowing what waveform to look for will help greatly with troubleshooting should they still fail to indicate the appropriate information.

After we were done at Bob’s I headed over to the Meijer’s northeast of M-59 and US-23 to get a few things for Linda.  By the time I got home, Glen Williams of Tenor Clocks LLC had arrived to service our grandfather clock.  I “broke” it about a month ago by trying to wind it at just the wrong time and it has not chimed since then.  It has also never been oiled in the 11 years since we bought it and Glen told us on Saturday that it should be cleaned and oiled every 5 – 7 years.  (We saw Glen at the GLCC/CCO rally in Clio, Michigan this past Saturday when we were there.)  Glen took the mechanism out and examined it and said that nothing was broken.  Apparently it finally bound up the last time I wound it from lack of proper oiling.  He cleaned it, oiled it, and checked it for wear but did not see any.  He reassembled it, checked the operation and timing, and said it was running smoothly and keeping very accurate time “…like a well-oiled clock.”

Although my time on the computer today was limited, I managed to post my blog entry for August 1st and started selecting photos for other posts.  I updated the Technical page on the SLAARC website with a document on low band antennas for Field Day use, and added a link to an online Smith Chart Tutorial.  I then updated the online roster.  I am at the point where I need to generate WordPress user accounts for the club members so I looked more carefully at the WP-Members plug-in documentation to see if there was a way to have the website e-mail each member as I create their account.  It appears that there is, but it will take a little more work on my part to get that set up and working correctly.  As I was working on this our AT&T DSL line started dropping out; again.

Linda spent part of the day preparing food ahead in advance of having company tomorrow.  She held back some of the crushed red lentil soup for our dinner and served it alongside sandwiches.  While we were eating we noticed that the phone said “Line In Use.”  We knew we were not using it, but I picked up one of the handsets, pushed “Talk”, and got a very loud, very noisy busy signal.  We checked all of the phones to make sure there wasn’t a problem with one of them.  There wasn’t.  When I checked again the message said “Check Tel Line.”  That usually means we won’t have a dial tone when we push “Talk” and that was, indeed, the case.

Ken is the service technician that has been out twice to try to resolve the problem and he left his AT&T cell phone number in case we had recurring problems.  He also left his manager’s name and phone number.  I called and left a message for Ken and then called and left a message for his manager, making it very clear that Ken has been working hard to resolve our problem and we are happy with the service he is providing.  I also tried to convey that the service disruptions are interfering with our ability to do things online, like edit websites.  It’s bad enough that the data rate is so slow, but we depend on our “always on” DSL service to always be on.

We went to Lowe’s after dinner to buy a couple sheets of drywall.  We looked for special cover plates with a switch opening in one half and a round hole in the other, but did not find anything like that.  We stopped at Teeko’s on the way back and had Jeff roast two more pounds of half-caff blends for us; one Ethiopian Yirgacheffe and the other Seattle Blend.  He was still out of the Sweet Dreams decaf blend, which we have him mix 50-50 with the regular Seattle Blend to make Sweet Seattle Dreams, but he is supposed to be getting some in his shipment tomorrow.

Back home we unloaded the drywall, had some fresh strawberries for dessert, and read quietly for a while.  I’ve been reading the PDF version of the 2nd edition of The Mobile Internet Handbook and am done except for the glossary and the appendices.  It is over twice as many pages as the 1st edition and is the definitive resource on connectivity for RVers in particular.

 

2014/08/18 (M) Tasks Menagerie

I woke up early, before 5 AM, so I got up, showered, shaved (not a daily occurrence), got dressed, and sat in the living room to read.  I started making coffee around 7 AM, which provided Linda the clue (incentive?) to get up and get dressed.  Ahhh, breakfast (homemade granola).

No more limbs hanging over the bus.

No more limbs hanging over the bus.

Linda was on tap to babysit in Ann Arbor today and left around 8:15 AM.  I got the Little Giant ladder out of the front bay of the bus and set it up as 14′ extension ladder.  This is the only ladder we own that will get me onto the roof of the bus.  I took a brush to clean off the roof of bus and a pole saw/pruner to trim tree branches encroaching on the bus.  When I was done on the roof I collapsed the ladder and put it back in the front bay as this ladder goes wherever the bus goes.  I trimmed lots of other trees from the ground and then gathered up the limbs into a pile to get them out of Keith’s way so he could cut the grass.  (Monday is grass cutting day this year.)

I wanted to run the Aqua-Hot but discovered we had left the electric heating element on so the coolant was hot enough the diesel burner would not come on.  We have been told by Aqua-Hot service technicians in seminars that the unit should be run at least once a month to keep it in peak operating condition.  I turned the electric heating element off and checked to see what else might be on that wasn’t needed.

I looked at replacing the overflow reservoir with the larger Oasis one I got from Butch, but it would require stand-offs or brackets to clear existing water lines (at least until I rebuild the water bay) and I did not feel like getting involved in that today.  Besides, the overflow reservoir was just below the full/hot mark from having left the electric heating element turned on, so I needed to let the system cool down before I could do anything anyway.

No limbs hanging out into the pull-through driveway.

No limbs hanging out into the pull-through driveway.

I chatted with Keith for a little while after he finished cutting the grass and then had lunch, after which I settled in to work at my desk on the SLAARC WordPress website.  I took a break mid-afternoon and made several phone calls.  My first call was to Heights Tower Systems in Pensacola, Florida to start finding out what I need to get our used Heights tower erected, how to order it, and what it’s going to cost.  My chat with Katie made it sound like they might not be all that helpful.  They need measurements, photos, and the name of the previous (original) owner as a starting point and I said I would send her that information as soon as I could.

I called Paul’s Tree service next to see if Paul Keech might come out and trim our trees.  The gal who answered the phone said Paul was trying to get out of the tree-trimming business but wanted to know if we needed trees trimmed or felled?  We need both, but I was primarily looking for trimming.  I guess that was the wrong answer.  I left my name and phone numbers and asked that he at least give me a call.  I suspect we will have to find someone else to trim several trees in places I cannot reach.

My last call was to EZ-Connector in Tulare, California.  I talked to Joe and was ready to order until he suggested I double check a couple of things first, specifically the number of circuits (wires) I need and the length of connecting cable.  I need to get these parts ordered, but I’m not sure when I will find time to verify these things.

Linda stopped at the Whole Foods Market in Ann Arbor but still got home ahead of the afternoon traffic.  She bought an Amy’s roasted vegetable pizza for dinner which we enjoyed with red grapes and sweet Bing cherries.  I worked some more on the SLAARC website creating pages for business meeting documents and uploading them.  I also uploaded my blog posts for the last five days of July to our personal blog.  I added more projects to my bus project list, got discouraged at its growing length, and went to bed.