Tag Archives: Pat & Vickie (GLCC)

2015/09/19 (S) Rally Wrap Up

Leave a reply

Today was the last full day of the FMCA Great Lakes Converted Coaches (GLCC) annual Surplus and Salvage Rally.  It started with strong storms overnight but they had dissipated by breakfast time.  The skies eventually cleared on brisk winds with a chilly northerly component and the high was forecasted to be 67 with some clouds.  The clouds turned out to be white, scattered, and fast moving and it turned out to be a lovely late summer day with a hint of fall in the air.

The breakfast provided as part of the rally was pancakes and sausage but Linda and I had our granola and finished up the berries.  We decided to stay around the campground and have an easy day.  Initially, however, we had some post-breakfast excitement.

Juniper caught another mouse.  It was another very small dark gray house mouse, obviously very young but old enough to wander away from a nest in search of food and water.  I got it away from her and into the paper cup that we kept for this purpose and put the paper bowl on top.  Linda took it back to the woods and set it free.

Even after catching two mice in the last 16 hours the cats continued to show great interest in the base of the bathroom sink cabinet.  The front of the toe kick space has one of the many brass colored expanded metal screens for the OTR HVAC ducts and several things were becoming clear to me at this point.  1) We had a nest somewhere in the bus; 2) the nest was likely in the base of this cabinet, or accessible from there, and 3) the baby mice were apparently small enough to get through the expanded metal grate.  I also suspected that something had happened to the mother mouse which is why the babies were leaving the nest.

Some of this was confirmed when I got down on the bathroom floor with a flashlight and was looking through the grate when a small mouse came out of the 4″ flexible duct.  I tapped on the grate and got it to turn around and go back.  I measured the rectangular opening.  Linda cut a piece of cardboard about 1″ larger in width and length and I taped it over the opening.

We were away from the coach visiting with Scott Crosby of http://BusGreaseMonkey.com and others before Scott left for home.  Scott and Tami Bruner came over too, followed by their friends/neighbors Misty and Gary who brought their GM3751 Silversides to the rally.  When we returned to our motorcoach it was immediately obvious that Juniper had caught, or at least cornered, something, probably another mouse.  Her posture and vocalizations are distinctive in the presence of prey.  What was odd was she was by the front of the new built-in sofa rather than in the bathroom.

I shushed her away and she left the area without much protest.  I did not see a mouse and walked to the bathroom to make sure our cardboard cover was still in place.  It was, so if there was another mouse it must have gotten into the living area of the bus through some other opening, perhaps the OTR HVAC air return under the sofa.  When I returned to the living room the mouse was climbing up onto the top edge of my slippers.  I did not see exactly where it came from but it could have been inside one of them to escape the cats.  I got the paper cup and bowl and caught it fairly easily.

I put on my Crocs, which we use as easy on/off camp shoes, walked back to the woods at the southern boundary of the campground, and set the mouse free.  It scampered under some leaves but its odds of survival were probably as small as it was.  The temperature was forecast to drop into the upper 40’s tonight and I heard a Great Horned Owl off in the distance.  Still, its survival odds in the bus were probably worse.  We had live trapped an adult house mouse under the kitchen sink when the bus was still at home, but that was a couple of weeks ago so there is no way it could have been the mother of these current juvenile mice unless it found its way back into the bus.  My assumption was that the mother was not around and the young mice were desperately trying to find food and water.  These circumstances made me a bit sad, but we simply cannot have mice getting into the living area and becoming play toys for our cats.  Ultimately we need to find a way to keep them out of the bus altogether but so far a solution to that problem has proven to be elusive.

The official rally lunch was leftovers after which folks divided up whatever was left.  Linda split the remaining salad lettuce with Vickie and took some bell peppers, onions, mushrooms, and bottled water.  I grabbed a mostly full 2 L bottle of diet Coke.

Marty Caverly stopped by to see the bus remodeling and stayed to chat a while.  Marty had spent the better part of a day at the Back-to-the-Bricks Rally last month getting Pat and Vickie’s cruise control to finally work reliably.  He spent most of this morning getting their air leveling system to work reliably.  Marty is an electrician who did a lot of work with electronics in his 40 years with General Motors and is the “go to” guy in our club for most electrical issues.

There was a lull in our social activities and Linda settled in to read while I worked at my computer transferring drafts of blog posts from e-mail to Word.  I edited a week’s worth from the third week of July and got them ready to upload but did not post them.  I will do that when we get home.  I used the MCD day shade while sitting at the desk to cut down the light while still affording me a view.  Linda forgot her iPad and was using mine to read one of the latest novels in Nick Russell’s Big Lake series.  She went for a walk which gave me an opportunity to work on this post as I write them using the Note app on my iPad.

We saw Pat and Vickie walking towards the office and figured they were making arrangements for next year’s Surplus and Salvage Rally.  They stopped at our coach on the way back with the signed contract.  The dates are September 21 to 25, 2016 and the nightly camping rate is $35 plus tax for 50A full hookup sites.  It’s pricey, but the campground is conveniently located in the heart of the Elkhart area with convenient access to many RV surplus businesses.  We also get the exclusive use of a meeting room with a full kitchen, and they always reserve sites for us that are close to the meeting room.  It should be a lovely time of year to have the rally, being the first five days of fall.  Unfortunately we will probably not be attending as we do not plan to be back from New England by then.

Meals for this rally usually include dinner on Wednesday, Thursday, and Friday, with Friday also being a business meeting, and breakfast on Thursday, Friday, Saturday, and Sunday.  The only lunch is the “must goes” on Saturday.  Saturday dinner is traditionally out at a restaurant and the choice this year was McCarthy’s on the Riverwalk.  The Elkhart River splits as it comes into the city, joins back up with itself and eventually flows into the much larger St. Joseph River at two points.  McCarthy’s features some very interesting Irish fare but the ambiance is slightly upscale restaurant rather than an Irish pub feel.  Our food choices were very limited, of course, but we knew that before signed up to go.

We rode over with Pat and Vickie and sat with them at one end of the table.  I think we had 13 of the 23 attendees at dinner.  Linda had a Guinness and I had a lighter beer that had “cider” in the name.  We each had a house salad with a very nice balsamic vinegar dressing but no cheese and an order of French fries.  The service was OK but not outstanding.  I asked for Tabasco sauce and Vickie had to remind the waitress to get it.  I was over half done with my fries by the time it arrived.  The serving was small but the fries were good and we did not leave hungry.

Most of us went for a walk along the river after dinner.  The sun was already below the downtown skyline, however, and it was chilly.  None of us brought jackets so it was a shorter walk than it might otherwise have been.

Back at the campground Scott and Tami started a campfire in the fire pit by their rig.  Linda and I brought over our chairs, blankets, a bowl of grapes, and our glasses of wine.  Vickie brought her chair, popcorn, and a popcorn skillet designed for popping corn over an open fire.  Dan brought his chair and joined us.  It was a clear, crisp evening but the fire (and blankets) made it comfortable, the popcorn and grapes made it yummy, and company made it worthwhile.

Although relaxing in some ways, rallies are intense in other ways.  We have only been here 3-1/2 days but we arrived tired, ran around taking care of things, and when we finally relaxed the tiredness washed over us.  We gathered up our things and went back to the coach at 10 PM where we watched an episode of Grantchester on the local PBS affiliate, went to bed, and fell asleep.

 

2015/09/18 (F) RBus Anniversary

Leave a reply

The predicted thunderstorms came overnight with heavy rain and lots of lightning and thunder.  I was aware of the rain but Linda seemed to be more aware of the lightning.  Based on the radar just before going to bed the strongest storms passed north of us.  Even with furnaces and air-conditioners we are more intimately connected to the weather in our RV than we are in our house, especially during storms, but we like that aspect of the lifestyle.  If we wanted to live in a climate controlled bunker we would build one at the house.

Our bus at the GLCC Surplus Salvage Rally at Elkhart Campground in Elkhart, IN. We bought it six years ago today. We are the 4th owners as best we can determine.

Our bus at the GLCC Surplus Salvage Rally at Elkhart Campground in Elkhart, IN. We bought it six years ago today. We are the 4th owners as best we can determine.  The older GM buses behind ours are also members of the FMCA Great Lakes Converted Coaches chapter.

We bought our bus six years ago today.  It is an H3-40 VIP motorcoach that was manufactured by Prevost Car Inc. in Quebec, Canada in August 1990.  It is powered by a Detroit Diesel 8V92TA diesel engine manufactured in April 1990.  It went directly to Royale Coach in Elkhart, Indiana in September 1990 and the conversion was finished in October 1991.  Because of the timing it was titled as a 1992.

In Michigan vehicles have to be at least 25 years old to qualify as “historic” so we are still a couple of years away from that benchmark, but she is a grand ole gal none-the-less.  Technically historic license plates, which carry an inexpensive registration fee, are only supposed to be used on vehicles that receive limited use, such as in car shows and parades, but people routinely put them on everyday use vehicles to avoid paying higher registration fees.  We, however, do not intend to do that.  It’s the kind of thing that some bureaucrat in the future can decide to do something about and end up imposing retroactive penalties.  It’s just not worth the risk of having to deal with that hassle.

We spent an hour after breakfast figuring out the required dimensions for the Corian table that will go between the two captain’s chairs in the living room of the bus.  I then called Countertops Plus and left a message for Ferman Miller with the dimensions.  It turned out that the table needs to be 22″ wide and 38″ long and I doubt that he has enough material in his 96″ by 30″ sheet to make both the desktop and the table.  I will follow up with him on Monday if I do not hear back from him before then.

We left late in the morning to visit two of the surplus and salvage businesses on US-12 in Michigan.  Johnson’s is just west of White Pigeon and Bontrager’s is east of White Pigeon but not as far as Sturgis.  I found two switch plates at Johnson’s that might fit two small 12V DC switches I need to mount.  At Bontrager’s I found a 1-1/2″ Bristol blade valve to replace the one on our fresh water tank.  We also bought four packages of small 12V DC LED rope lights.  Each pack is 5 meters (16′) long and has 60 warm white LEDs per meter.  They are rated at 4.8 Watts per meter and are very bright.  My intention is to use them around the inside of cabinet openings in place of the incandescent light fixtures that are original to the coach.  The will give a brighter light and illuminate the entire inside of the cabinet rather than shining light from a single location.

We looked at a powered fresh water hose reel with a 40′ hose and a powered 50A shoreline reel with a 33′ cord.  They wanted $200 for the water reel and $400 for the cord reel.  Linda looked them up online using her phone.  The asking prices were certainly less than retail at Camping World, but not enough less to make me shell out that kind of money for something that might not get installed for a year or more, if I could figure out a way to install them at all.

We stopped at Martin’s on the way back to camp and bought two Amy’s frozen vegan lasagna entries for dinner.  The other rally participants were having regular lasagna and we wanted to fit in.  🙂  Salad was also being served and Vickie was making it without cheese, eggs, etc. so we could have some.

Pat and Vickie had a Nutone Food Center years ago and still had some of the accessories plus a replacement motor.  They brought all of it over to see if it would fit our unit.  It did, but was missing one piece, a right angle drive that was needed for some of the accessories.  Vickie was pretty sure they had it somewhere at home but would have to look for it after the rally.  They also did not have the food processor, which is the accessory that interests Linda the most, but it was nice to get what they had.  Linda can start checking EBay now that we know the other accessories fit our recessed power base.

I helped Pat with the wiring for an LED replacement bulb for a fluorescent light fixture.  They have 12 of these fixtures (with 24 tubes) in their 1987 Prevost XL conversion.  Pat found LED replacements that can be wired directly to the switched 12V DC supply, completely eliminating the use of the electronic ballasts.  It turned out that the pins at each end of the tubes were also electrically active and we had to cut all of the interconnecting wires.

Ed Roelle stopped by to find out what we were doing with all of the food equipment.  Apparently someone thought we were “giving it all away.”  Not true, of course; it belongs to the club and isn’t ours to give.  What we wanted was for different people to take the things that will be the most useful at the rallies they host.  Linda and I do not make it to all of the rallies, and next summer we will miss two of the big ones; Back-to-the-Bricks in August and Surplus & Salvage in September.  We plan to attend the Escapees Escapade Rally at the end of July in Essex Junction, Vermont, and then the FMCA rally in early August in Massachusetts.  We will then head for the Canadian Maritimes and work our way back down through New England over the course of the early fall.

Pat Caverly stopped by to see the bus.  Linda showed her around and then we all sat down to visit for a while.  After they left to help with dinner preparations I finished the posts for yesterday and the day before, e-mailed them to myself, and started working on today’s post.

Dinner was scheduled for 6 PM and most folks were gathered by then.  Rain looked imminent so I closed the three roof vents in our bus, gathered up the bag of chapter T-shirts and flags, and went to the meeting room.  I conferred with Pat, Vickie, Tami, and Linda and decided to hold the brief business meeting before dinner.  It took all of 10 minutes.  Dinner was salad and lasagna.  Vickie prepared the salad by keeping all of the ingredients separate.  That allowed us to build our salads using only things we eat, which we really appreciated.  Linda heated the frozen Amy’s vegan lasagnas that we bought at Martin’s for our main course.

Linda was helping clean up in the kitchen and I was sitting at a large round table swapping bus stories when Michele Henry of Phoenix Paint came in.  She was on her way home, which is not far from the campground, and knew from talking to Josh (at Coach Supply Direct) that we were here for a rally.  She stopped in to see if she could find our coach, which of course she could even in the dark, since she is the one who painted it.  Linda and I excused ourselves and went back to the coach with Michele, retrieving her kids from her car.  We showed her the interior remodeling and had a long chat.

While we were talking Juniper caught a small house mouse.  We knew there was one around because she had been focused on the bathroom most of the day exhibiting stalking behavior.  Something got my attention and when I went back to the bedroom it was immediately obvious, even in the dark, that she had a mouse on the bed and was “playing” with it.  I got a paper cup and went to the bedroom to try and catch it.  It was very small, clearly a very young mouse.  I made Juniper release it and it hunkered down on the floor by the HVAC duct.  When I put the cup down it started to go the other way but Juniper was there and it turned around and ran into the cup.  Although the cup was not big it was big enough, and slick enough, that the mouse could not climb out.  I put a paper bowl over the cup to make sure it did not escape and we continued to chat.

It started raining while Michele, Raven (her daughter), and River (her son) were visiting.  At one point the rain was very heavy and the lightning was intense and frequent so they stayed long enough for the storm to pass.  It was getting late and we were all a bit tired so they prepared to leave.  I took the bowl off of the cup and placed a plastic zip lock bag over the cup and zipped it shut.  Raven carried the cup and Michele said they would release the mouse about a mile down the road near an area of fields.

Linda turned the front TV on and we watched an episode of Gotham, which we will not have to watch again, and American Masters (on PBS).  The American Masters episode was on the photographer Pedro Guerrero.  Although known as perhaps the best photographer of Frank Lloyd Wright’s architecture, he had a far-reaching and distinguished career.  As always, it was a well done program on a fascinating individual who made important cultural contributions.  Linda was dozing at the end, went to bed, and fell asleep.  I tried to write for a while, gave up, and went to sleep.

 

2015/09/17 (R) Counter This

Leave a reply

I went to breakfast before Linda as she was still asleep.  I wanted coffee but it wasn’t ready so I toasted a blueberry bagel and ate that.  Eventually the coffee was ready and I had some.  Linda showed up a little while later with our granola and fruit and most of the rally attendees arrived and had breakfast.  I got a call from Josh regarding the Corian desktop.  He indicated that Ferman Miller of Countertops Plus in Shipshewana had a piece of Sandstone Corian big enough to make our desk top and was expecting us to call or visit.

After breakfast we gave Vickie a tour of the bus and visited for a while.  We then drove to Countertops Plus, located east of downtown Shipshewana, and met with Ferman Miller.  He had a piece of 1/2″ Sandstone Corian that was a perfect match to our existing counters.  It was 96″ long by 30″ wide.  He needed a 72-3/4″ by 25-3/4″ piece for the desktop plus a 72-3/4” by 1″ piece and a 25-1/4″ by 1″ piece for the front and left edge returns.  It looked like he might have enough Corian left to make our dining room table so I made a quick sketch but left off the length and width dimensions.  We ordered the desktop and the table.  He figured out the price and we gave him a deposit.  I need to determine the length and width of the table and call him in the morning with those dimensions.

We set the GPS for Jarel Beatty Cabinetry and headed for Logansport.  I called Jarel to let him know we were on our way and verify that it was still OK to come.  We drove through the pleasant Amish/Mennonite countryside on small count roads we had not previously traversed and passed a school where the children were playing softball dressed in their plain, traditional clothing.  It was an odd yet delightful sight.  Once we were on US-20 we were on familiar roads.  We stopped along US-20 for fuel and a break and bought some peanuts and water.  We arrived at Jarel’s place at 2:11 PM.

We brought a 60″ long piece of 1/4″ walnut veneer plywood and had Jarel rip two pieces 4-3/4″ wide.  He actually cut them slightly wider and then trimmed off a small edge to get the long edges clean and square.  We loaded the half sheet (96″ by 24″) of 3/4″ walnut veneered plywood in the car and then loaded the half box cover for the forward passenger side OTR HVAC duct.  There were other pieces of plywood and hardwood left so we loaded all of those as well.  We only realized after we left that we forgot to get the drawings back from Jarel.  I sent him a TXT message and asked him to hang on to them until I could get them from him and he agreed to do that.

We stopped at the Martin’s supermarket about a mile from Elkhart Campground and made salads for dinner at their excellent salad bar.  It was 5:30 PM by the time we got back to the campground.  Dinner was nominally at 6 PM but was ready to eat closer to 6:30.  Linda reheated seitan stroganoff (vegan, of course) for our main course.

After dinner we gave Charles and Connie Martin the tour of our interior remodeling project and chatted for a while.  There were thunderstorms in the overnight forecast so I rolled up the two driver side awnings.  We then joined Scott and Tami Bruner at the fire pit by their bus.  I took a couple of folding chairs over and Linda brought our glasses of Franzia Moscato.  Charles joined us and so did Dan.  Tami had interviewed for a new job this morning, gotten the offer, and accepted the position, so it was a big day for her.  She and Scott have also been successful finding things they need for their bus conversion projects (they own two buses) so it has been a very good week for them.

Tami was tired and headed off to bed and Linda had the same idea a short while later.  There was a fairly high probability of rain starting at 2 AM with but we got occasional drops starting at 10 PM.  By midnight we were all getting tired and the raindrops were becoming frequent enough that they gave us an excuse to call it a night as we needed to put our lawn chairs away so they did not get soaking wet.  I wrote for a while in bed but I was too tired to work efficiently and went to sleep around 1 AM.

 

2015/09/08 (T) Polyurethane

Leave a reply

I was awakened at 6:30 AM by heavy rain.  I was not sleeping comfortably and had to get up anyway, so I put on my lightweight robe and slippers and took my iPad to the living room.  Naturally the cats wanted to be fed so I took care of that and then settled in to put the finishing touches on yesterday’s blog post.  The rain lasted for about 20 minutes.  I e-mailed the post to myself at 7:15.  Linda got up at 7:30 AM so I made coffee but we deferred breakfast until later.

I was thinking about the house battery voltage issues Butch was having and the role of the Vanner battery equalizer in his (and our) house battery system.  I did another Google search on “battery equalizer …”, and selected “batter equalizer circuit” from the list.  One of the listings was for the original patent application by James D. Sullivan as assigned to Vanner, Inc. ( http://www.google.com/patents/US4479083 ).  (I found it interesting that Google has a special directory for patents.)  As I expected, it is a DC-to-DC converter and in its most common configuration it is designed to take charge from the upper portion of a series battery pack and supply it to the lower part of such a pack or to any loads connected across just the lower bank.

One of its features is that it looks at the voltage across the entire battery pack and uses a voltage divider network (two resistors in series) to generate a reference voltage that is compared to the voltage across the lower bank.  Differences as small as 0.01 volts result in the transfer of charge from the upper to the lower bank when the lower bank has the lower voltage.  As implemented for use with buses and other vehicles that have 24/12 dual voltage DC electrical systems the divider network consists of two equal resistors and the reference voltage is 1/2 the overall battery pack voltage.  The design can “balance” other configurations, in which the “upper” and “lower” banks do not have the same voltage, by changing the divider resistors to have the correct ratio.  I will call Butch again this evening to report what I found and see how things stand with them in general.

When we had consumed a sufficient amount of coffee to be alert enough to work intelligently and safely we went to the garage to finish assembling the left plenum/support box for the built-in sofa.  I forced mating pieces into alignment while Linda drove in the screws.  These parts dry fit perfectly so this should not have been a problem.  I blame the slight misalignment on the corner clamps that I used.  I was reminded, once again, that cheap tools are almost never a bargain.

We had breakfast at 8:30 AM; homemade granola with leftover mixed berries.  We also spilt a banana that was getting past ripe.  As we were finishing our meal I got a call from Steven Weber at Martin Spring with another question on the Webasto system in the Prevost Bus Conversion he is servicing.  He had isolated a cracked fuel pipe and needed to order a replacement.  I suggested Sure Marine Service but also mentioned Lloyd DeGerald and Darin Hathaway.

Linda needed to spend some time at her desk preparing for a 1 PM meeting with the I.T. department at the University of Michigan Ann Arbor so I took a shower and got dressed to work.  I gathered up the laundry, started a load, and then spent some time in the garage sanding pieces of the built-in sofa while Linda showered and got dressed for her meeting.  She planned to leave at 11:45 AM.  I left at 11:30 and went to Lowe’s to buy tack cloth.

Tack cloth is like sticky cheesecloth and is probably called that because it is “tacky” to the touch.  It is used to remove sawdust, drywall dust, and other little tiny particles from surfaces such as sanded wood just prior to the application of finishes.  While I was there I looked at inline water separators and inline oilers for use with air compressors supplying air to pneumatic tools.  I also looked at copper fittings to see if they had 90 degree elbows that I could use to modify the Aqua-Hot coolant lines that feed the two front fan-coil hear-exchangers.

Linda left before I got home.  I moved the laundry to the dryer and went back to the garage to work.  I was contemplating what I wanted to do next when Keith pulled up in his truck and trailer.  I chose to skip having the lawn mowed this week which will help Keith get the rest of his clients taken care of in his shortened 4-day workweek.  The grass has grown since last Monday but not that much and is still short and brown in places.  With rain in the forecast today, tomorrow, and Thursday giving it another week should be good for it.  I showed him the floor in the bus before he left.

I returned to the bus project and realized that I needed to stain the underside of the built-in sofa shelf as part of it might be visible through the notch in the vertical front panel at the floor.  As long as I was staining that I also stained the tops of the plenum/support boxes so they would blend with the two stationary pieces at either end of the seat.

With the staining done I came inside to make a few phone calls.  The first one was to Josh Leach at Coach Supply Direct to check on the details of the Corian countertop for the custom desk.  Josh said the Corian normally comes bonded to plywood which protects it from cracking in shipment.  I want to go ahead and cut the 3/4″ plywood top that will join the two pedestals together.  I also wanted to know if his Corian vendor could come out on the afternoon of the 14th to measure and possibly install the countertop by the end of the week.  His vendor turns out to be an Amish craftsman who does not “come out and measure” or “come back and install.”  Josh said he would check with the vendor to see if he would use my plywood base and also see if he had the Sandstone product in stock.

My next call was to Pat Lintner to check on dinner plans for the upcoming GLCC Surplus and Salvage rally.  I need to coordinate with Crimp Supply to have them provide catalogs for the attendees and perhaps speak to the group before dinner.  I got his answering machine and left a message.

My third call was to Jim Miteff (N8KUE) returning his call/message from earlier.  We had a long chat about RVing and Prevost bus conversions.  It’s a big topic and I sometimes forget that I have spent the last 10 years learning about it.  When I think back to the beginning of this adventure, however, I recall how exciting yet overwhelming it was initially.  I see Jim in the same place, but he is a very quick study and professional researcher so he will get past the overwhelming part fairly quickly.

While I was talking to Jim I heard a loud bang and then another one.  They sounded like it had come from within the house.  After the second one I got up to investigate.  As I peeked out the front door a Consumer’s Energy truck was backing out of the driveway.  I flagged the driver down and asked what was up.  He said they had detected a leak and that he had just fixed it.  I presumed it was at our meter but he wasn’t any more specific than that.  I thought it was odd that he did not knock on the door first to let me know he was on site, but I guess they have the right to service their infrastructure.  I have smelled gas on that side of the house occasionally ever since they installed it but dismissed it as a “purge valve” doing its thing.  We had the same issue at the old house and they kept telling me it was a “vent” mechanism on the meter.  I never belief that, but whatever.

I wrapped up my call with Jim, put in another load of laundry, and returned to the garage to apply polyurethane to as much of the built-in sofa pieces as I could.  Each piece has to be done in two steps and requires two coats, so that’s four applications that will have to spread out over a couple of days.

There wasn’t much else I could do, and I did not feel like working at my desk, so I hung up the dry laundry and then worked on my iPad in the living room.  Linda had made an appointment with Renee to have her hair cut at 4:30 PM.  She stopped at Meijer’s on the way home and finally arrived at 5:45 PM.  I went back to the garage at 6 PM and applied another coat of polyurethane.

Linda bought an Amy’s Roasted Vegetable pizza for dinner and made a nice salad to go with it.  I had some more of the Leelanau Cellars Apricot wine and we had the last two vegan cupcakes for dessert.  I tried calling Butch twice but his phone was either off or out of range.  I called Pat Lintner again and this time he was home.  Saturday dinner will be at a restaurant so that will not be a good time for Crimp Supply to talk to the rally attendees and pass out catalogs.  I will call them tomorrow and see what I can arrange.

I headed back to the garage yet again, applied polyurethane to all the surfaces that had not yet been coated, put the brush in the soapy water, sealed up the can, and closed up the garage.  I think I have just enough polyurethane left to put one more coat on the top surface of the shelf.  I plan to do that in the morning before I start anything else.

On the drive home Linda heard a weather forecast that thunderstorms were headed our way this evening with up to 1″ of rain, strong wind, and possibly small hail.  Linda headed off to bed at 8 PM to watch NCIS and I caught the last half of the show.  I turned the channel to Create on Detroit PBS and watched A Chef’s Life, a series about a wife and husband who run the Chef & The Farmer restaurant in eastern North Carolina, and then turned the TV off.

I checked the weather with my iPad and it appeared that system had fallen apart although there was still a reduced chance of scattered thunderstorms at 11 PM and again from 2 to 4 AM.  I turned the light out at 10:30 PM.

 

2015/08/03 (M) Happy 37

Leave a reply

Today is our son’s 37th birthday anniversary.  Happy birthday Brendan.  Linda sent him a happy birthday text and his reply confirmed that they are at Tahquamenon Falls in Michigan’s Upper Peninsula.

My main task today was to finish the design of the built-in sofa for the bus and get the drawings in the mail to Jarel Beatty, the cabinet maker in Logansport, Indiana.  I dovetailed that work with breakfast, lunch, and a long chat with Pat Lintner from our FMCA Great Lakes Converted Coaches (GLCC) chapter, but by 2 PM the two 17″ x 22″ sheets were ready.

I was not satisfied with the quality of the copies I got from The FedEx Office store in Brighton so I drove to the store in Novi where their large sheet scanner/printer does a really nice job.  Copies in hand I drove to the post office in Brighton, bought a Ready Post mailing tube, addressed it, put the copies inside, and sent it on its way.  Back home I sent Jarel an e-mail letting him know the sofa drawings were on their way and explaining them a bit.  I then settled in to continue uploading blog posts to our website.

Later in the evening I got a text message from Jarel with three more photos of the custom walnut desk.  He had sprayed all of the pieces and was letting them dry.  He planned to work on something else tomorrow but thought he would have the drawer slides and drawers installed by the end of the week.  He will probably start on the pull-out pantry but wasn’t sure he would get it done before he leaves for a vacation trip on the 21st.  It is unlikely that the built-in sofa pieces will be done by then and the HVAC chase cover needs to wait until after the desk is installed in order to get a final, accurate measurement for its length.

I will probably drive down and get the various desk pieces from him before he goes on vacation so I can install them as soon as the new floor is installed.  I have to install the two fan-coil heat exchangers in the bases and redo the hoses before I can put the pedestals in place so it will be easier for me to do this at home.  As part of the same trip I will stop at Coach Supply Direct in Edwardsburg, Michigan and pick up the fabric we ordered for sofa cushions.  If we decide to use A-1 Upholstery in Elkhart I will drop the fabric off there along with drawings of the cushions we need made.

For my evening relaxation I read a little more of “Number Theory and Its History” by Oystein Ore and then went to bed.

 

2015/06/02 (T) GLAMARAMA 2015 (Day 0)

Leave a reply

We were up at 7 AM and had cinnamon toast for breakfast but did not have coffee.  We checked various routes to the Elkhart County 4-H Fairgrounds (EC4HFG) and searched online for information about any possible road construction problem areas but did not find anything that looked problematic.  By 8 AM we had started preparing the bus and car for travel.  Linda walked over to Curtis’s coach to say “so long for now” but all the shades were down so she sent him a text message that we were on our way.  We pulled out of our site at 8:15 AM.  I pulled up clear of other RVs and stopped to wipe off the passenger side mirror which was obscured with dew.  I am always surprised that I don’t notice things like that before we start to move.

We took CR-4 west to SR-19 and went south, crossing over the Indiana Toll Road, to CR-6.  There are times of the day that this intersection would be very busy but traffic was light this morning and I had no trouble getting into the correct turn lane and completing the turn.  CR-6 is a 4-lane road and moved along nicely all the way to CR-17 except for a short lane closure for local maintenance.  We turned south on CR-17, took it down to US-20, and headed east.  As I expected, this stretch of US-20 was still very much under construction with only one lane open in each direction and no wide loads over 11 feet permitted.  Traffic was more congested and slower but it moved along.  When we got to SR-15 we turned south and ran along nicely until we got to a construction zone that had the road down to one lane with flaggers.  We waited patiently and eventually got through the bottleneck.  We were routed through a short detour and then finally entered Goshen.  We followed the SR-15/US-33 Truck Route and found ourselves in another one lane construction zone with flaggers, and a train thrown in for good measure, but we eventually made it to our turn onto eastbound CR-34 (Monroe Street) and drove the final mile to Gate 5 of the EC4HFG.

We were directed to the staging area where we unhooked our car.  We were then led to the area reserved for our Great Lakes Converted Coaches Chapter and backed into our site.  The Laughing Raven Touring Co. bus was already parked in our area.  We saw this bus at Elkhart Campground while walking but did not realize it was headed to the rally.  The owner, Mark Lovegreen, is not a member of our chapter but wanted to park with other buses and we were glad to have him.  I reserved 12 parking spaces, the parking crew gave us 13, and I had a least one coach that was not going to show up so we had the space.  Also, Pat and Vicki Lintner got parked on hard surface nearby as the ground in our area was very soft when they arrived on Sunday.  In addition to being our chapters National Director Pat is the Senior VP of GLAMA would normally be parked elsewhere except that he likes to park with the chapter.

While Linda set up the interior and made coffee I hooked up the electrical power.  Our main 50 A circuit breaker did not want to set.  I finally pushed the lever hard enough to move it but did not like the way it sounded and did not get power to the coach.  I have indicator lights that told me there was power at the coach end of the shorepower cord but I verified that using my VOM.  I removed the cover from the disconnect box in our coach and verified that there was voltage present on both the L1and L2 bus but no voltage present on the output lugs of the circuit breaker.  Bummer.

Linda turned off the 30A supply circuit breaker and unplugged the cord.  I checked with the VOM that there was not voltage present and then unclamped the L1 and L2 load wires, removed them from the circuit breaker, and then removed the breaker from the box.  I tested it for continuity and with the lever in the “ON” position and one leg showed a short but the other leg showed an open.  That meant I should have had voltage coming through to our Progressive Industries EMS on one leg but I never did.  Regardless, we needed a new breaker as at least the one side had clearly failed.

The circuit breaker was a Square D QO style 2-pole 50A model.  I knew that Lowe’s carried QO breakers so Linda searched for the nearest store using her phone.  There was one on US-33 back towards Elkhart so Linda fixed a “to go” cup of coffee for me and I headed there.  They had a good selection of QO breakers including the 50A one that needed.  I looked briefly at refrigerators and noted that they had the Frigidaire model we are considering in white, black, and stainless steel.  Maybe we will drive up later to look at them.

I took a different route through Goshen to avoid the one lane construction zone.  Back at the coach I refilled my coffee and got to work.  As bus repairs go this one was pretty straightforward.  Getting the two load wires into the circuit breaker clamps was a bit tricky but I got them in.  The QO breakers snap onto a mounting rail at the bottom and then the contact fingers snap over two blades at the top.  All of that took a bit of pushing but I got it in.  I put the cover plate back on, reconnected the shorepower cord, turned on the supply breaker, and turned on the coach breaker.  We had power to the coach but it shut off.  I reset the breakers (turned them full off and then back on) and everything appeared to be fine and the power did not trip out after that.

With our power problem averted Linda walked over and got us registered and signed up for one of the few remaining time slots to work in the rally office.  She had volunteered to work registration but most of the time slots were already filled and the only thing left was Saturday morning.  Shortly after she returned to our parking area three more buses showed up:  Bill and Karen Gerrie, Mike and Kathy Dickson, and Joe and Mia Temples.  Next in were John and Paulette Lingafelter followed by Don and Sandra Moyer.  Late in the afternoon Scott and Tami Bruner arrived.  That only left a couple of coaches arriving tomorrow.

I borrowed a sledge hammer from Joe Temples and pounded three pieces of rebar into the ground to serve as supports for the clubs three flag holders.  A number of RVs around the rally site had the same design and I suspect that there was an article in the magazine, or something online, about how to build these.  They are very simple and inexpensive, can be taken apart for transporting, and rotate with changes in wind direction.  Our club as a USA flag, a Canadian flag, and a Chapter flag.

We all stood around in small, shifting groups talking about this and that.  I laid down around 2 PM and napped for about 90 minutes.  We are conveniently located to one of the bathroom/shower facilities so Linda took a shower there so as to not use up the good water in our tank.  By 6 PM most of our group had left to go out to dinner.  We ate around 6:30 PM, having a nice, light supper of cold chickpea salad on a bed of power greens.

A little before 7 PM we drove back to Lowe’s to look at refrigerators.  It turned out that the ones I saw were the 18 cu. ft. models not the 16 cu. ft. one we need/want.  The 18 cu. ft. model would fit in our alcove but take up the entire width leaving no space for a pull out pantry.  We looked at solar powered spotlights for illuminating the flags at night but at $18 each decided not to buy any as we needed at least three and would ultimately need the approval of the club to buy them.  We stopped at the Martin’s market on US-33 and picked up a deli tray brochure and a few grocery items.

Back at the rig there were lots of folks gathered in conversation.  Linda and Vicki went for a walk while I chatted with Mark (from Alaska) and Scott.  Scott and Tami recently had a new Whirlpool residential refrigerator installed in their bus so I went to see it.  It’s a very nice French door fridge with lower freezer drawer but is too tall for our alcove.  This is the style refrigerator Linda wanted but we could not find one sized to fit our space.  Bill Gerrie helped me get the U.S. and Canadian flags off of the holders.  Linda and Vicki returned just in time to help fold them properly.  With darkness came much cooler temperatures and everyone retreated to the warmth and comfort of their coaches.

Someone reminded us that Paul’s Seating in Elkhart was a good place to shop for furniture so Linda Googled it and found the website.  There were pictures of lots of chairs, including a barrel chair, but no information about dimensions, fabric options, or prices.  We will likely go to Martin’s in the morning and place a food order and then drive in to Elkhart and find Paul’s.  The critical path for our interior remodeling project goes directly through the selection of furniture and then through the refrigerator replacement so we are starting to feel some pressure about getting decisions made and orders placed.

 

2914/06/20 (F) Couch Potatoes

Leave a reply

Over the last few months I managed to connect our friends and fellow Prevost H3 owners, Chuck and Barbara Spera, with our friends and fellow Prevost XL owners, Pat and Vickie Lintner.  Chuck was looking for a sofa to replace the one in their motorcoach and Pat and Vickie had one they were looking to sell.  Today was the day for consummating the deal, which necessitated a road trip from the Detroit, Michigan area to the Elkhart, Indiana area to pick up the couch, pay for it, and bring it back to Chuck’s shop.

Chuck and I drove down in his Ford Excursion.  I went along to keep him company, for the opportunity to catch up on a lot of conversation, and to help load and unload the couch.  We arrived in Elkhart just after noon and grabbed a quick bite to eat at Burger King.  I had French Fries, thus today was about couches and potatoes.

While I was away on the road trip, Linda went to Ann Arbor to visit our 18 month old grand-daughter and her parents (our son and daughter-in-law).  By dinner time we were both tired so we had Amy’s Pad Thai and turned in to watch two episodes of Doc Martin.  We did not get to watch any episodes while we were at the rally in Goshen, Indiana so we are catching up.

 

20140605 (R) Apple Roku

Leave a reply

Linda had to go into the bakery today which left me to catch up on phone calls and errands.  I made more phone calls to contractors this morning and had better luck than yesterday reaching people or at least leaving messages.  I rescheduled with Gary from GM Construction to come discuss the pole barn project.  I also got hold of Bratcher Electric and determined that the annual maintenance on the whole house generator could wait until we are ready to do the conversion from propane to natural gas, which they can handle.  In talking to Mike Bratcher I also determined that we can install a main panel in the garage just after the transfer switch and then run power directly from there to the pole barn rather than from the main panel in the basement.  While we are at it, we could redo the sub-panel in the garage, feeding it directly from the new main panel rather than the main panel in the basement.  The basement panel is very crowded and we have wires carrying electricity back and forth unnecessarily.

I got a call from Butch with an update on the negotiations of the sale of the major portion of their business assets.  Linda has been advising them relative to valuation, accounting, and tax issues and we have been helping them with purchase agreement language.  It looks like they are in the final stages leading up to a closing of the deal.  Their big annual event is coming up in early July and they will likely be busy with the transfer of inventory and training of the buyer during and after that event.  I need to get our bus down to their place to work on some projects and help Butch work on getting their bus conversion done enough that they can live in it this winter in the southwest.  Based on things going on at both ends, it looks like the window for that work will be mid-September to sometime in November, weather permitting.

Our converted coach friends, Pat and Vickie, have some older Motorola GMRS handheld radios that they like but the charger bases have disappeared.  My ham radio friend Scott (AC8IL) is in the commercial mobile communications business so I checked with him to see if chargers were still available.  They were and he had a couple of the drop-in style charger/bases in stock!  Scotty is just that kind of guy.  I picked them up this morning and will deliver them to Pat and Vickie at the GLAMARAMA rally.

Apple Roku sounds like an interesting dessert, but it’s not.  It might be an either/or situation, but it could be a both/and.  John Dewey was a both/and kind of guy, so I favor that approach.  We were intrigued by Steve and Karen’s Roku Internet TV streaming device last night so I stopped at Best Buy today on my way home from running my errand to see if they had them in stock and if so at what price.  Not only did they have them, they had three different models.  The “stick” was $50, the Roku 2 was $70, and the Roku 3 was $100.  (The Roku 3 does not have A/V connectors like the Roku 2, only HDMI, but it has a five times faster processor.)  But that was not all, oh no.  They also had the Apple TV device for $100 and two other similar products, one of which looked like an Amazon/Kindle thing and the other one a WD thing, whatever that is.

The Roku units (2 and 3) have access to a lot of content on a free, subscription, and pay-per-view basis.  The Apple TV unit has access to content on the same basis but the selection may not be as extensive; it’s hard to say for sure as the devices are not easy to compare directly.  The Apple TV unit, however, has one huge, unique feature; it can mirror anything on an iOS device, such as our iPads, to a TV/monitor.  The iPad can also be used as a control panel for the Apple TV device.

We do not have to choose between a Roku and an Apple TV unit, of course, we can get and use both if we want; it’s just a matter of money.  Between the two TVs in the house and the two in the bus it could be a lot of money if we wanted dedicated units of both types on all four TV/monitors.  We always have the option of moving things back and forth, but in general I prefer not to do that.  To the extent we can afford it I prefer to have the house and the bus set up so that the only things we move between them are the things we have to, such as ourselves, our food, our laundry, our computers, our cats, and some of our ham radio gear (at least for now).  The best solution, however, may be to get one of each device and move them around as needed.  That would give us the best cost/benefit ratio, but not the most convenience.

When Linda got home from her day at the bakery we finished the Egri Merlot we had opened the other night and caught up on the day’s events.  We decided to try the Apple TV device first and see how it worked in our situation.  Linda made an onion, mushroom, tomato Ragu, and served it over the leftover power grains.  It was very tasty.  After dinner I went to Best Buy to get the Apple TV device while Linda prepared fresh strawberries for dessert.  Fresh strawberries are a favorite treat of ours.  She served them with small pieces of Dandelion Small Batch Chocolate made from 70% Ambanja Madagascar 2013 Harvest beans.  The chocolate was excellent and unique.  It was a thank you gift from our son and daughter-in-law for Linda’s babysitting services while they were in San Francisco, California.

We connected the Apple TV box to one of our HD TV/monitors and went through the setup procedure.  We decided to test it on some PBS content, which required us to set up an account with PBS and enter a validation code that the Apple TV box provided.  We also downloaded an app onto Linda’s iPad2 that allowed it to mirror whatever was on its screen to the Apple TV.

We used the mirroring feature to watch Season 1, Episode 5 of Doc Martin, but it proved to be unusable.  The image was fine on the iPad2 but the Apple TV could not keep up.  I found that to be odd as our home WiFi network should have more than enough bandwidth to deliver the data stream between the devices, but maybe not.  I presumed that the limiting factor in our network was the data rate coming into our DSL gateway from our AT&T landline, but that was obviously fast enough to deliver the content from the gateway to the iPad without buffering hesitation.

We turned off the mirroring and finished watching the episode on the iPad.  Still, the content delivered directly from the gateway to the Apple TV looked great, and the mirroring will be useful for showing photos and anything else on our iPads.  We may reconfigure the Apple TV to use one of our other wireless networks and see if that helps.

 

2014/02/10 (M) A Day Of Firsts

Leave a reply

It was a near perfect day weather-wise, and a pretty decent day in all other respects.   We woke to clear skies with temperatures in the upper 40’s but by late morning it was 70 and gained a few more degrees by late afternoon.  Winds were very light from no particular direction and there were very few flying bugs.  We had a leisurely morning with our usual coffee and granola.  We took showers.  Linda vacuumed.  I opened the awnings on the coach to let them air out and dry, with assistance from Linda for the patio awning.  This was only the second time we have deployed the awnings since we left home, and the first time we planned to leave them open as rain is predicted for only one day in the next 7 to 10 days.

Linda continued with her cross-stitch project and I dealt with e-mail, website, and technology issues.  Bill was unable to clear the error codes on Pat & Vickie’s DDEC I engine computer so I e-mailed Butch, who also has a DDEC I, and provided some additional guidance.  Bill indicated that they needed wiring diagrams, which Pat did not have.  Bill had them, but they were back home in Ontario.  Doh!  I have the diagrams with us on the Network Attached Storage device.  They are all PDFs I got from Bill on a CD.  I located the lists of drawing numbers, picked a half dozen that I thought might be what Pat needed, put them in a folder in our Dropbox, and e-mailed everyone back.  Dropbox has turned out to be one of the better little pieces of technology in our cyber arsenal.

Around noon we walked to the Grocery Depot to pick up a few ingredients for dinner; a one mile round trip and the closest place to the RV resort to buy groceries.  Linda prepared lunch and we ate outside; the first time the weather has been nice enough to do that since we got back to Williston Crossings on January 1st.  We then sat outside to work; again, one of the rare days we have been able to do that.  Mid-afternoon we went for a longer walk around the RV resort that included our first hike down into the quarry.

We noticed that WCRVR had installed a new sign just inside the new entrance to the resort off of FL-121.  This is where the new section of park is being developed with ownership sites that will be available for purchase.  The sign said “The Reserve at Williston Crossings” so apparently that is how they plan to market these sites.  The sign is framed on either side with a new wood rail fence and plants, all of which looks very nice.  The first two sites have had paver blocks added to the concrete pads to dress them up a bit; presumably as demo sites to show prospective owners what can be done if they so choose.  It will be interesting to see what else they do in this area before of the park before leave.

When we returned to our coach we continued to sit outside to work and just enjoy the day.  Although the park is quiet and peaceful, it is not silent during the day.  We rarely hear other residents (talk or music) but there are always folks walking or riding bikes, and maintenance work being done by resort staff and residents.  We are near the south/old entrance so when we are here we see all of the rigs coming and going that way.  We saw more people out tending their sites or cleaning their vehicles than on past walks.  And there are birds—lots of birds—and with the sunnier, warmer weather they have had a lot to say.

Eventually, inevitably, as afternoon faded into evening it cooled off and we lost our light.  We retreated inside, had dinner, and watched Antiques Road Show on Gainesville PBS while working on projects (cross-stitch and BCM) before retiring for the night.  Linda made a delicious acorn squash stuffed with white rice and mushrooms, and onions and we opened our bottle of Blueberry Rhubarb Wine from Forestedge Winery (LaPorte, MN).  We have been spending time at the resort on less than ideal weather days so we could use good weather days to go exploring.  We enjoyed finally spending a nice day at home.

 

2014/02/07 (F) Downtime

Leave a reply

Earlier in the week we were making plans to go to Crystal River today with John and Marian Hagan but by Wednesday evening realized that being out three days in a row would be too much and put us too far behind on various tasks.  Besides, the weather forecast for Friday was for cold, overcast, rainy conditions; not ideal for exploring and hiking, especially when we had the option of going some other time.  The forecast for Saturday was even worse, but the forecast for Sunday looked much better and turned out to be a better day for them anyway.  We would have had to be back early today anyway as tonight was pizza night and our pickup time was 6:30 PM, so we stayed home today and planned to stay home tomorrow as well.  I did not take any photos today.

Linda concentrated on her cross-stitch, went for a walk, and took a call from Butch, who had another potential buyer for their business (Linda helps them with accounting and tax returns).  I worked on e-mails and blog posts and had a couple of phone calls and e-mails with Pat, who had a relay replaced in their bus and needed someone to clear the fault codes in the DDEC I engine computer.  Unfortunately the only cartridge I had for our Pro-Link was for a DDEC II / III.  Pat had already called Prevost’s Nashville service facility and they did not have a code reader for a DDEC I.  I suggested that he contact Bill in Orange City.  As I blogged in late December, Bill has a newer diagnostic instrument with cartridges for every DDEC version, as well as Allison transmissions, and was camped relatively close to Walt Disney World.  I also suggested Prevost’s Jacksonville service center and Florida Detroit Diesel Allison in Jacksonville, both of which are only an hour from Fort Wilderness.

With the January 2014 issue Bus Conversions Magazine started adding additional content to the digital edition which they send out as a PDF or allow online (registered) users to download.  With the February 2014 issue they began offering the digital edition in two versions; Standard Definition (SD) and High Definition (HD).  The SD/HD editions has expanded content compared to the print edition, most of which is additional photographs with the photos in the HD version being much higher resolution than the in the SD version.  They have also made the advertisements live links to the advertisers’ websites and plan to add video and other expanded content in the future.  I had an old login for Bus Conversions Magazine that no longer worked so BCM set up an online subscription for me so I could access the online only HD version.  My old login did not work for the BBS/Forum either so I also registered for that.

Volunteers at Williston Crossings RV Resort (WCRVR) make pizzas to order every Friday using the clubhouse kitchen, which has a small conveyor type pizza oven.  Orders have to be placed by 4:00 PM on Thursday and are for a specific pickup time.  We decided to give this a try after our neighbors described how it works and told us the pizzas were pretty good.  We ordered one with mushrooms and onions, hold the cheese, and asked for thin crust.

Friday and Saturday evenings are campfire nights at WCRVR so we had a salad at 6:00 PM, picked up our pizza at 6:30 PM, and headed to the fire pit.  The pizza was big enough for two people to split, only cost $6.00, and was partly a social thing.  Kevin, John, and Ali were there along with a few other folks.  Kevin had a nice fire going and John had his guitar.  We ate our pizza and then Linda got us a couple of glasses of Moscato.  WCRVR is not over programmed, but there are plenty of things to do here if you want to join in.  Of all the nice things at Williston Crossings RV Resort, the Friday and Saturday evening campfires have been the nicest, with John, Jeff, and others providing musical entertainment.  And they have been best when they were more lightly attended, which has been the case on these cool, damp evenings, allowing for more and better conversation.

After we returned to our coach for the evening we turned on the TV and watched a couple of interesting shows on PBS while I finished creating the blog posts for the two preceding days.  Such are our days at WCRVR in Florida.

 

2013/12/07-12 (S-R) The Celebrations Begin

Leave a reply

On Saturday morning I went to our local ham radio club breakfast as I usually do.  Linda stayed home, which is not usual, as I had a website meeting immediately following breakfast.  Club president Mike (W8XH) and I previewed the new club website for a small group that included the other two officers.  We provided them with logins so they could access the site, most of which is blocked from public view, and asked them to interact with it and provide feedback.

We had ordered garage door openers so each of our children could have one.  They arrived a couple of days earlier and we finally got around to programming them on Saturday afternoon.  They arrived just in time, too, as we were headed to Katie’s (grand-daughter #2) 17th birthday dinner that evening.  Our daughter (Meghan) and her husband (Chris, Katie’s dad) were there, as were our son (Brendan), his wife (Shawna), and their daughter (Madeline, grand-daughter #1).

Katie has developed quite a taste for sushi and selected Yotsuba in Ann Arbor, Michigan for her birthday meal.  Japanese restaurants were once a rare treat for us.  As with most restaurants that are not specifically vegan, or “vegan friendly” Japanese restaurants now pose a challenge for us.  But they had things we could eat, and they were very good.  Katie is very interested in science and decided she would like to start building a library with some quality leather-bound books in it.  She specifically requested Darwin’s On The Origin Of Species… and Linda was able to find a used, mint condition copy at Franklin Books (in New Jersey).

Brendan and Shawna had a social engagement after dinner so they left to put Madeline to bed.  Linda and I followed a short while later and did baby-sitting duty for a couple of hours until they returned.  By the time we got home it had been a long but very good day.

Sunday evening was the annual South Lyon Area Amateur Radio Club holiday dinner which is held in lieu of our regular second Sunday of the month business meeting and technical program.  The club decided to try a new venue this year and selected the Zukey Lake Tavern near Pinckney, Michigan from among three candidates.  Although not located in South Lyon, we had a portion of the restaurant to ourselves that was sufficient to accommodate the 40 people who showed up.  We were also allowed to order from the menu and had sufficient wait-staff to efficiently take our orders and deliver our food.  Everyone seemed to enjoy themselves and like the food; at least they ate a lot of it!

Linda pulled her usual babysitting shift on Monday and I headed for Edwardsburg, Michigan to retrieve the bus.  I originally planned to winterize it and then drive to our friends’ place in Twelve Mile, Indiana to spend a couple of days tying up loose ends on the Zena auxiliary power generator project.  I was then going to take the bus to Martin Diesel in Defiance, Ohio to have them check, service, and adjust it before returning home.  As most of this work would be done outside, I decided to alter my plans when the weather forecast called for overnight low temperatures near zero (F) for most of the week.  Pat and Vickie Lintner from our FMCA Great Lakes Converted Coaches chapter had once again offered the use of a spare bedroom at the house in Elkhart, Indiana so I took them up on that.  That allowed me to spend the later afternoon and early evening working with Michele Henry at Phoenix Paint on an article I was writing about the exterior renovation of our coach that was done by her shop from October 2011 to August 2012.  I grabbed a salad for dinner at the Martin’s grocery store on SR-19 on the north side of Elkhart, Indiana and then headed to the Lintners’ for the evening.  (BTW:  If you are in the Elkhart area and want a really nice salad, the Martin’s salad bar is fabulous.  They also have a deli counter where you can get hot items, including potatoes.  They have fountain and bottled soft drinks and a Starbucks Coffee, all conveniently located next to a two-level seating area where you can sit and eat, and they have free Wi-Fi if you want to sit and work.)

On Tuesday morning I finished prepping the bus for travel, hooked up the car, and left Phoenix Paint around mid-morning for the drive back to our house in Howell, Michigan.  I like to change up my route, so this time I took US-12 to I-69 to I-96 to M-59 to our house, with a stop at the Mobile Truck Stop on I-96 at M-52 before exiting onto M-59.  I arrived home mid-afternoon with a full tank of diesel fuel, parked and leveled the bus, and plugged it in.  Linda was in holiday shopping mode, so she wasn’t there when I arrived.

I spent the next couple of days working at my desk trying to get a few last minute things taken care of on various websites and straightening up papers.  When we are gone for a while we prefer not to come home to clutter and chaos.  Linda went to the bakery for the day on Thursday and I headed over to Micro-Center in Madison Heights, Michigan to purchase a Buffalo Technologies LinkStation 421e dual drive Network Attached Storage (NAS) enclosure and two Toshiba 3.0 TB hard disk drives.  This new NAS was an addition to our existing Buffalo Technologies LinkStation Pro Duo 1.0 TB RAID 1 NAS, which we planned to take with us in the bus.

The drives were very easy to install in the LS421e.  On power up the LS421e initially configured itself as a RAID 0 NAS, which means it combined the HDDs to appear as a single 6.0 TB drive.  The NAS Navigator 2 software that came with the unit made it fairly easy to manage the device and I reconfigured it as a 3.0 TB RAID 1 NAS, in which the two drives are mirror images of each other.  If one drive fails it can be replaced with a drive of the same or larger capacity and the new drive will become an exact mirror of the other one.  The process required some patience, however, as the RAID 1 configuration took approximately 10 hours per Terabyte, or 30 hours total, to configure itself.  The NAS Navigator 2 software tells you this in advance, so it doesn’t come as a surprise, but it is a very long time.  A bonus to the NAS Navigator 2 software is that it will manage all Buffalo Technologies LinkStation and TeraStations on the network, so I was able to use it to manage the existing LinkStation.  That was an unexpected bonus as the existing LinkStation was originally installed and managed from a workstation computer that is no longer in service.