Tag Archives: Aqua-Hot expansion tank

2015/10/11 (N) Now Heat This

I guess we were tired after having Madeline at our house for 23 hours.  We slept in until after 8 AM and it was going on 9 by the time the coffee was brewed and we sat down to breakfast.  I really needed to attend to some paperwork for our FMCA Freethinkers chapter but was also eager to get deeper into the manual for the new Sony a99v camera.  I installed the PDF manual onto my laptop yesterday from the CD-ROM that came with the camera and then e-mailed it go my iPad2 so I could read it conveniently.

HL – Jasper, our mackerel tabby male cat, allows himself to be photographed on the living room floor.  You wouldn’t know it from this photo, but he is actually a very sweet animal ad a real joy to have in our household.

Jasper, our mackerel tabby male cat, allows himself to be photographed on the living room floor. You wouldn’t know it from this photo, but he is actually a very sweet animal ad a real joy to have in our household.

Other than the time, date, and date format I have not adjusted any of the default settings or experimented with the camera’s many functions.  I have taken a few photos just to make sure it works but I do not want to start generating a lot of image files until I have made decisions about basic things like folder naming conventions and “normal” shooting modes and settings.  I did, however, enable a “rule of thirds” grid on the viewfinder screen.

Linda worked on our personal accounting and then prepared the treasurer’s report for our amateur radio club meeting this evening.  I took a break from reading the camera manual to research the availability of some accessories on the B&H Photo website.

The electric cable release for my old Minolta 9000 SLR film cameras works with the a100 so it may work with the a99v too.  If not, newer remotes are available, including wireless ones that are not too expensive.  I found the angle finder but it is discontinued.  With the adjustable LCD screen in the back of the camera the angle finder isn’t really necessary but would have been a nice accessory just the same.  I am also looking for a case and/or a photographer’s vest and/or a chest harness/holder.  The a99v with the vertical grip and a telephoto lens is a substantial piece of equipment, both in size and weight, and the chest harness/holder would support that weight more comfortably and securely than a neck strap.  I found several interesting things but not exactly what I had in mind.

By the time Linda finished her accounting tasks I was dressed to work.  First up was the hydronic heating system in our bus.  I got four pieces of 2×4, each about four feet long, and two pieces of 2×12 about 16″ long.  I put a pair of 2x4s under each desk base and inserted one of the 2x12s between the 2x4s and the base.  That raised each base three inches which was enough to ensure that the heater hoses attached to the lower fitting on each heat exchanger sloped slightly downward back towards the main unit.

The hose that connects the two heat exchangers together in series is attached to the top fitting on each one.  Half way between the exchangers is a T with the bull branch pointing up.  A ball valve with a waste port is attached to the branch.  While Linda held the valve higher than anything else in the system I opened the valve and used a small funnel to slowly pour in antifreeze.  When the lines and exchangers appeared to be full I closed the valve, turned on the thermostat for that loop, and turned it up to cause the circulating pump to come on.  I let the pump run for a few minutes and then turned it off.  Again with Linda elevating the valve I opened it and added a little more antifreeze.  I ran the pump again for a few minutes and shut it off.  This time the coolant was still right at the valve so I shut it and Linda set it down.

It was now time for “the big test.”  In order to be able to see if there were any leaks, and catch any coolant if there were, we put heavy duty paper shop towels under all six of the clamped connections where the heater hose went over 3/4″ copper as well as under the soldered joints of the T and valve.  I opened the water bay on the passenger side, where the Aqua-Hot is installed, checked the coolant level in the expansion tank, and made sure the paper cup was positioned under the overflow tube.  The level of coolant in the expansion tank was just above Minimum Cold.  With everything in order I turned on the Aqua-Hot burner and then turned the front zone thermostat back on.  I also turned on the thermostats for the bathroom and bedroom zones to cause coolant to circulate through those loops.

There are quite a few gallons of antifreeze in the hydronic heating system and even on a mild day such as today (temperature just above 70 degrees F) it takes a while to heat it up to the 170 degrees required to shut off the diesel burner.  I kept checking the hoses by the fill valve and the expansion tank.  When the hoses were warm and the level of the coolant had risen 1/2″ in the expansion tank I cracked open the waste port on the fill valve.  I got a tiny, short hiss and then coolant came out so I quickly closed it.  It appeared that our method for filling the system and bleeding the air out had worked as intended, and there was no evidence of any leaks.

I left the Aqua-Hot on until it shut off on its own.  The expansion tank was near full at this point and I topped it up.  As the system cools down the coolant will contract in volume and some of the coolant in the expansion tank will be drawn back into the main chamber.  It’s important that there is more coolant in the expansion tank than the amount that will be drawn in or air will get drawn in instead.  I buttoned up the coach and turned to my next task.

I removed the chain from the new Poulan Pro 18” chain saw since I completely dulled it trying to cut through a tree root.  As long as the cover, chain, and bar were off I cleaned up the motor unit as best I could.  Oil impregnated sawdust is tenacious stuff.  I put the new chain on the bar and attached them to the motor, making sure the chain was oriented correctly.  I topped up the bar and chain oil reservoir and topped off the fuel tank.

It took several trips to get the 7′ step ladder, pole saw, compound lopping shears, hand tree saw, and chain saw back to the apple tree.  I noticed yesterday that one of the main branches coming off the trunk about 3′ above the ground was dead.  The bark was missing and the smaller limbs were brittle.  The bark looked like it might have been chewed away by deer but I wasn’t sure.  All I knew is that it was dead.

I started with the pole saw and worked from the ladder to cut off the limbs that extended far up into the tree.  Once I had those detached and pulled out of the tree I started the chainsaw and used it to cut off the larger branches as I worked my way down towards the main trunk.  I gathered all of the smaller material into a pile and then gathered the larger pieces together.  I used the largest piece as a sawbuck to support the other pieces as I de-limbed them and cut them into four foot lengths.  I then cut up a large pine tree limb that has been sitting on the ground under the apple tree for quite a while.  I used the pole saw and loppers to trim off a few other small branches and the carried all of the tools back to the garage.  It was 3 PM by the time I got everything put away.  I was done with physical work for the day so I got a much needed shower and got dressed appropriately for our meeting later.

The apple tree is still in need of serious pruning if it us to survive and bear useful fruit.  It particular it needs to be “topped.”  It is too tall overall, especially in the center, and much of the fruit is growing up there where the sunlight is good but it cannot be reached either by us or by the deer.  We have been putting deadwood in the firepit all summer and, more recently, on the disposal pile, where it goes mostly depending on what part of the yard the tree was in when it fell or got cut down.  In the case of the apple tree it occurred to me that Applewood is prized for the smoke it produces when grilling so I may stack it up, let it continue to dry, and perhaps rent a chipper next year to turn it into something useful.

We had breakfast later than usual, and skipped lunch, so we ate dinner at 4:30 PM, which was earlier than usual.  Dinner was lentil loaf, baked potato, and steamed broccoli, a simple but healthy and tasty meal.

On Friday I exchanged a few text messages with Josh at Coach Supply Direct regarding our desktop and table.  The net result was that his schedule had changed and he was not going to be able to get our desktop and table from Countertops Plus in Shipshewana, Indiana and deliver them to us for over a week, at the earliest.  He had also planned to bring some extra clips for our MCD shades and look at the wiring on the front passenger seat 6-way power base.  Those last two items were not critical but we are ready to install the desk once we have the desktop and cannot afford to wait another week and a half to get it.  I called and left a message for Ferman Miller to let him know I would be driving down tomorrow morning to pick them up.  I then worked on this post until 5:30 PM when I stopped to reinstall the antenna, radio, and GPS in my car.

We left at 5:45 PM for our monthly SLAARC meeting and shortly thereafter heard Mike (W8XH) on the South Lyon 2m repeater.  I replied to his call and we had a QSO that lasted almost all the way to our meeting site, where we arrived within a minute of one another.

We socialized with fellow club members from 6:30 PM until Harvey (AC8NO) called the business meeting to order just after 7 PM.  The club secretary was absent so I took the minutes.  The business meeting lasted less than 10 minutes and was followed by a presentation on APRS by Eric (K8ERS).  I gave Mike (W8XH) a check for the Icom IC-2820H dual band radio that has been in my car since early summer.

As I said at the beginning, I really needed to update the FMCA Freethinkers roster and financial reports and make them available this evening.  Well, sometimes things don’t happen just because they need too.  Today was just too perfect a day to waste it sitting inside at a computer and by the time we got home from our meeting I did not feel like starting this task.  I will try to make this a priority tomorrow evening, but each day is an adventure and I have to be agile in dealing with the myriad tasks that lay before me, including ones that appear unexpectedly.

 

2015/09/16 (W) CSD to GLCC

I spent the night in the coach at Coach Supply Direct, in the fenced in parking lot, next to the train tracks that run parallel to M-62 through Edwardsburg, Michigan.  I was up late and went to bed tired.  The trains did not bother me (they run at every hour of the day and night) but aching knees and joints in my hands, especially the base of my thumbs, made for a less than sound sleep.  I had also not leveled the coach when I arrived yesterday but it was slightly low to the front passenger side so it did not bother me as me head was higher than my feet, the head of the bed being on the driver’s side of the bedroom.

I had granola for breakfast, checked my e-mail, and was just settling in to start today’s post using my iPad when Josh showed up at 7:30 AM.  He opened the building and retrieved a small desk/cabinet and loaded it into his car to take back to the cabinet maker.  A portion of the back needed to be finished as it will be exposed when installed.  Having just been through the process of designing built-in RV furniture and interacting with a cabinet maker I understood how a detail like this could easily be missed.  We were fortunate in our choice of Jarel Beatty, as recommended by our friend Butch Williams, to build our pieces.  Jarel’s meticulous attention to the details of how something would be constructed, installed, viewed, and used, resulted in our not having any post-construction issues.

After Josh left I checked the status of the house batteries.  They were at 81% SOC (State Of Charge). Not bad after 11 hours of use.  Extrapolating, it appears that given some reasonable energy management we could go 24 hours without recharging before hitting the 50% SOC level.  I did not, for instance, use the microwave oven.  That is much better than before we replaced the refrigerator so it appears that the new one is clearly more energy efficient than the old one.

I also checked the coolant levels in the Aqua-Hot and generator expansion tanks.  The Aqua-Hot tank was still above max cold but the unit was also still a bit warm to the touch.  The level in the generator tank yesterday was very low with the engine fully warmed up and operating under load so I added antifreeze up to the “hot” mark.  If was slightly above that level this morning although I expected it to be lower as the system cooled off and drew the coolant back in.

Tyler showed up at 8:15 AM and knocked on the door.  He had stopped at McDonald’s and bought me a large coffee, half regular half decaf.  He had asked about this before leaving yesterday and remembered it this morning.  I was impressed with both his memory and thoughtfulness.  He got right to work on the cockpit seats, starting with the driver’s seat.  Before installing it, however, I had him repair the swivel plate.

That plate has always wobbled which was an uncomfortable and annoying sensation while driving.  Now that I had a clear view of the top of the plate it was “obvious” that there was once a washer under the retaining nut but it was no longer there.  Tyler removed the retaining nut, found a large washer with the correct hole size, put it on the threaded shaft, replaced the retaining nut, and tightened it.  No more wobble.

I am always trying to deconstruct the details of how this coach was built or serviced.  My best guess is that old seat was removed when CMI installed the tile floor in the cockpit area right after we bought the bus.  The installer probably removed the seat from the swivel plate in order to have better access to the pedestal and the area around it to lay the tile and either did not replace the washer or failed to recognize that it was missing and needed to be replaced.  I will never know for sure, but that’s my best guess.

Tyler bolts the new Flexsteel driver’s seat to the existing pedestal swivel base.  There is not a lot of room to work around the base of this seat.

Tyler bolts the new Flexsteel driver’s seat to the existing pedestal swivel base. There is not a lot of room to work around the base of this seat.

I connected the chassis batteries so Tyler could connect the 12V DC power to the seat and reposition it.  The outside rear mounting bolt was particularly difficult to reach but with the power on he was able to slide the seat forward and swivel the front to the left creating better access to the left rear.  Once it was bolted down he had me sit in it and make sure all of the adjustments worked.  They did!  The seat is comfortable, fits better in the available space, and has a range of adjustment that should allow either of us to position it comfortably.  It is still a little tight on the left side, but not like the old chair, and the only control there is a manual level for adjusting the back tilt that I can reach it without difficulty and generally do not change once I have it adjusted.

When Josh returned at 10 AM with the parts for the living room slider bases he and Tyler got busy prepping them.  Linda texted me around 10:20 for a status update and I suggested that she not leave before 1 PM.  There was more custom work required to get the chairs assembled and mounted than I thought there would be, but as I was able to watch every step of the process, and talk to Josh and Tyler as they worked, I could clearly see what the problems were and what they were doing to solve them.  They were on task and focused on getting it done correctly.

One of the new Flexsteel 529 captain’ chairs with the new swivel/slide pedestal base attached.  Note the handle for the swivel release.

One of the new Flexsteel 529 captain’ chairs with the new swivel/slide pedestal base attached. Note the handle for the swivel release.

The problem this morning was getting the swivel release cables on the cockpit seats to stay in place when the swivel tang was released from the detent in the base.  The reason for the problem is that we are reusing the old swivel bases because they have base plates that match the mounting bolt locations in the floor.  The way the swivel release cable is retained on these bases, however, is different from the attachments on the ends of the new cables.  Tyler was able to figure out a solution but it took a little time.  I don’t mind paying for that kind of experience and problem-solving.

I texted Jarel to give him a status update and indicated that we could come down Thursday, Friday, or Saturday to pick stuff up.  He texted back that any of those days would work.  I checked the Magnum remote and the SOC status had gone back to “Think’n”.  Nuts.  This has happened before with the Battery Monitor Kit and I think it has to do with the 4-pin connector that plugs into the bottom of it.  Whatever the case I need to investigate and fix it if I can.

The two class C captain’s chairs installed on the passenger side of the living room.

The two class C captain’s chairs installed on the passenger side of the living room.

With the driver’s seat installed I sat and tested its various adjustments and found a position that I liked.  Next came the two class C captain’s chairs for the passenger side of the living room.  Tyler and I worked for quite a while using a base with no chair on it to determine the correct location for the bases.  The seats needed to be far enough from the passenger side wall, the desk, and the co-pilot seat to swivel without interference but no farther as we did not want them to encroach into the center isle one inch more than necessary.  We also ran them through their full range of slide and swivel motions to make sure we could pull them up to the table.

We ended up with the edge of the front seat 16″ from the front edge of the main floor and 16″ from the HVAC duct.  We checked it for square and marked the holes.  Tyler drilled pilot holes using nuts to limit the depth.  We set the chair in position and secured it with four lag screws.  We measured 36.5″ to the front edge of the second base and positioned the base 16″ from the HVAC duct.  We made sure it looked right and then Tyler marked the hole locations and we removed the temporary base.  He drilled the pilot holes, we set the chair in place, and lag screwed them into floor.

The new navigator (L) and pilot (R) seats installed in the cockpit.  The navigator seat has a powered footrest.  We reused the old 6-way power bases for both seats.

The new navigator (L) and pilot (R) seats installed in the cockpit. The navigator seat has a powered footrest. We reused the old 6-way power bases for both seats.

With the captain’s chairs installed in the living room Tyler installed the co-pilot seat.  Once that was done the job was finished except for the cleanup and paperwork.  Josh and I chatted some more about the Corian desk top.  He had inquiries out to three suppliers but was having trouble getting replies from them.  We needed a temporary desk surface, so Tyler cleaned off the 4’x8′ piece of 1/2″ plywood that had served as the workbench for integrating the seating components. He marked and cut a 72″ long x 24.5″ deep piece.  I notched the center of the back edge 18″ wide by 3″ deep.  Tyler and I installed it while Josh totaled up the bill.  I wrote him a check for the balance due, prepared the coach for departure, and left a little after 2 PM.

I could have titled this post “Edwardsburg to Elkhart” but I like to keep my titles short.  The trip from Coach Supply Direct in Edwardsburg, Michigan to Elkhart Campground in Elkhart, Indiana was a short trip of approximately 15 miles that took about 25 minutes.  Upon arrival I parked the coach to the side of the entrance road and went in to the office to register.

We have been to this campground many times before but I managed to miss the turn for the row with our assigned site so I had to go all the way around a second time.  Once I had the bus in the site I leveled it and then shut it down.  I texted Linda our site number and then chatted with other GLCC chapter members who were already there and parked.

While I helped set up tables in the meeting room Linda arrived and got the cats, litter tray, etc. on board our coach.  After settling in for a few minutes I called Terry at A-1 Upholstery.  She was there so we drove over to pick up the sofa cushions, wrote her a check for the balance, and drove back to camp.  We were unloading the cushions when Dan stopped by.  He had retired at the end of July and bought a converted GM4104 a couple of weeks later.  His wife Kathy and son James had made the trip up from Huntsville, Alabama just for this rally.  They planned to join FMCA and GLCC but wanted to check us out first.

Linda had cleared the sofa earlier and put stuff away under the bed.  By the time I came in she had the new sofa cushions in place.  They were a tight fit but they looked nice.  We might make a small adjustment to the depth of the plywood seat but I think they are going to work out OK.

Linda went to the meeting room to help prep dinner and heat our vegan chili.  I took a short nap and joined her at 6 PM to eat.  We went back to the coach and gave Ed Roelle the tour and chatted for a while.  We then went back to the club house, met up with Vickie, and went for a walk.  When we got back to our coach I opened the box of Franzia Moscato and poured two glasses of wine.  We took two lawn chairs over to Scott and Tami’s bus to sit and chat.  Scott Crosby of www.busgreasemonkey.com was also there.  He arrived after I did in his 1948 GM 3751 “Silverside” bus.  It eventually got chilly so we went inside and went to bed where I worked on blog posts for a while on my iPad.

 

2015/01/22-26 (R-M) Q 2015 W4

2015/01/22 (R) Sister Marilyn

Marilyn & Linda in front of Beer Belly's "adult day care" outdoor bar.

Marilyn & Linda in front of Beer Belly’s “adult day care” outdoor bar.

The temperature dropped into the low 40’s last night in the wake of the cold front that brought strong winds to Quartzsite yesterday.  We were up at 6:30 AM to give us time to eat breakfast and enjoy our coffee before Linda left at 8 AM for the Phoenix airport to pick up her sister.  Marilyn was scheduled to arrive at 11 AM MST and the airport is a 2 to 2-1/2 hour drive from Quartzsite but Linda wanted to take her time getting there and be in the cell phone lot before the flight got in.  The plan was to go to lunch and then drive back to Q so she was going to be gone most of the day.

I had turned off the diesel burner on the Aqua-Hot last night so this morning I turned on the three electric toe-kick heaters and the Broan cube heater to take the chill off of the interior.  With the coffee pot also turned on we were drawing 26 A at 115 VAC on leg 1 and 15 A at 118 VAC on leg 2.  That was more current than we were able to draw before Jim L. changed the shorepower connection from 30 A (120VAC) to 50 A (240VAC) and the first time we have had reasonable voltage levels since we arrived here.

I rode over to the RV show with Butch at 9 AM to look at tire pressure monitoring systems and we both ended up buying TireTraker TPM Systems from Darryl Lawrence.  We have both done business with Darryl in the past and trust him as a vendor.  I also bought three products from the Carnu-B booth.

Back at the coach I checked the coolant level in the Aqua-Hot expansion reservoir.  It was right at the maximum cold level so there was nothing else to do for the moment.  I needed to redo the overflow hose, but not today.  I then used two of the Carnu-B products on the driver-side side window and surrounding painted body surfaces.  It removed the hard water stains and polished everything up very nicely.  I then did a test patch on the front of Butch and Fonda’s bus and it appeared to clean the stainless steel nicely.  They later cleaned an adjacent patch with straight food-grade vinegar and it seemed to work just as well although it did not provide a wax finish.

While I was fiddling with the Aqua-Hot and the cleaning/waxing process Butch started reading the manual for the TT-TPMS and found information that indicated the system did not work the way we thought it did and needed it to.  The manual more than implied that the sensors were activated by motion and stated that readings would appear “… within 20 minutes of starting to drive.”  Say what?!  We both want to use the system to check our tire pressures BEFORE we start to drive, as would most RVers.

Although there are things we do not like about our current Pressure Pro TPM systems they certainly give us the current pressure in the tires without having to drive the vehicle.  They also allow us to monitor just the bus, just the car, or both.  Most systems do this, including the TireTraker, but the Truck Systems Technology (TST) does not.  That was Butch’s first choice system until he found that out.

At 12:45 PM I rode over to the Quartzsite Senior Center with Butch and Fonda for a 1 PM meet and greet with Chuck Woodbury of RV Travel and the Geeks On Tour.  It ran until 4 PM but we were anxious to get back to the RV Show tent and talk to Darryl.  We took our TT-TPMS units with us with the intent of returning them but Darryl assured us that they do work the way we need them to so we decided to keep them for another day or so to test them.

Fonda had not been to the RV Show yet so we walked the entire tent.  I spent a little time talking to the guy at John Carrillo Hydronic Heating.  He had a brand new, never been fired, Webasto DBW2010 burner (with the controller) for $1,800 (cash).  I have seen them online for $3,300, so I knew that was a good price.  I wish I needed one, but we already have a spare.  He also had a new combustion chamber for $200 and I may go back and get one of those.  They wanted $450 for an ignition coil, which I also need, but I can get one from Sure Marine Service for $303.  We spent a long time looking at flag poles at the Flag Pole Buddy booth and Butch bought a 22′ model with an extra set of mounts.

Linda was texting me her status on a regular basis and by the time we got back to camp she and Marilyn were already there and relaxing on the porch of Joe and Connie’s park model trailer.  We sat outside until the sun kissed the tops of the southwestern mountains and then moved inside to escape the chill.  While we were sitting in the coach visiting and cooking Butch installed one of the TT-TPMS sensors on the driver-side front tire of their Suburban, programmed it into the monitor, noted the readings, and went for a test drive.  He noted the readings when they got back and plans to check it again in the morning before moving the car.  That will be the real test.

For dinner Linda made a nice green salad and a lovely mushroom kale risotto with Arborio rice.  We then went to the apartment so I could light the pilot flame on the wall-mounted propane heater.  I visited for a bit and then went back to the coach and Linda followed a bit later.  We were both tired and turned in early.

240 degree panorama from atop 'Q' Mountain, Quartzsite, AZ.

200 degree panorama from atop ‘Q’ Mountain, Quartzsite, AZ. Left edge is N, right edge is SSW.

2015/01/23 (F) Q Mountain

We were up by 7:30 AM and Marilyn eventually arose and joined us for coffee and toast.  The only bread we had was a package of whole wheat pitas, but they toasted just fine and were very good with orange marmalade.  I am not, however, thrilled with the Soy Delicious Almond milk coffee creamer.  It is not as ‘creamy’ as Silk soy creamer and it tends to separate into tiny bubbles in the coffee.  I do, however, like the Almond milk that we sometimes buy, especially on granola type cereals.

Butch called just after breakfast to let me know that the TireTraker TPMS works the way Darryl said it does.  That was welcome news as we both like the system, including the small sensors and the rechargeable monitor, and we both like Darryl.  He and Fonda had things to do today so I borrowed his hose crimper pliers before they left.

Linda and Marilyn left shortly after Butch and Fonda and drove to Blythe, California to do some grocery shopping and sight-seeing.  That left me with some alone time to concentrate on getting some things done that I have needed to work on for a week, such as categorizing FMCA seminars, and have just not found (made) the time.  I value and enjoy my work with the FMCA National Education Committee but we have a significant personal investment in our presence here in Quartzsite, and although we will likely return here again in the years to come that is not guaranteed, and this could turn out to be a once-in-a-lifetime experience.  The FMCA work took about an hour to complete and e-mail too Jim A., with who has been the lead person on this.

I also needed to make a minor change to the Aqua-Hot expansion tank plumbing and turn the burner back on.  I removed the overflow hose, shortened it, re-routed it, and re-connected it to the drain tube on the tank.  I also tried to tighten the clamp on the middle zone pump hose.  I noted that the coolant level was at the ‘minimum cold’ mark on the expansion tank.  I will check everything again tomorrow.

With the Aqua-Hot project done I decided to replace the old Sentry turbo boost gauge with the new VDO gauge.  I removed the dashboard cover, disconnected the lightbulb connectors, removed the retaining bracket, and pulled the gauge out the front of the dashboard.  I removed the lightbulb socket to give me better access to the main air fitting and undid that, completely freeing the unit from the dashboard.  I pulled the light socket out of the new gauge to give me more room to put the air fitting on and to check the bulb type.  It was a miniature glass wedge base 12VDC 3W and will need to be replaced with a 24V, 3W bulb.  I then slipped the gauge into the dashboard from the front and secured it with the supplied bracket on the back side.  Linda and Marilyn returned at this point so I quit working on the gauge, put the cover back on the dashboard, and helped bring in the groceries.  I will have to get the 24V bulb and also rewire the leads to match the harness connectors.

We had a light lunch and then drove down to the market area and wandered through the big tent RV show.  We got new Ballisti-Tech screen protectors for our Samsung Galaxy S III smartphones.  We also strolled through a small part of the Tyson Wells and Prospectors Panorama areas.  When we left the RV show we headed south on US-95 to the BLM Roadrunner STVA so Marilyn could see the Quartzfest RVs in the desert.  We found Lou and Val Petkus at their 5th wheel and visited briefly before heading back to town.  The light was good and the sun was still high enough that I made an impromptu decision to climb Q Mountain and try to get pictures of the RVs spread across the desert around Quartzsite.

I got my pictures, and got off the mountain before it got dark, but missed the best color, which we saw while driving back to camp to close up the rig before going to dinner.  The Geeks were out viewing and photographing the sunset before walking to the Grubstake restaurant for dinner so and we chatted with them briefly and then drove to Crazy Jerry’s for our evening meal.  The very thin crust mushroom, onion, and tomato no-cheese pizza was excellent and the French fries were also good.  When we got back to our coach Linda prepared some fresh strawberries for desert.

After visiting with Jim and Chris on Wednesday we decided that we would join the Quartzsite Yacht Club, which claims to have the largest membership of any yacht club in the country (world?, universe?) at over 7,500., although we later heard that it was more than 9,000.  Membership is $30 which gets you a hat, T-shirt, membership card and certificate.  Apparently the membership is good at other (real) yacht clubs that honor reciprocal arrangements.  We had planned to join today but did not fit it in.  It may be Sunday or even a day next week at this point.

I spent some time transferring photos from my camera to my laptop computer and our NAS unit.  I processed three panoramas and three individual images taken on Q Mountain, checked my e-mail, and went to bed.

Sunset glow looking NE from 'Q' Mountain.

Sunset glow looking NE from ‘Q’ Mountain.

2015/01/24 (S) Lake Havasu City

We were up at 7:15 AM and I brewed a pot of coffee while Linda showered.  I took my turn and also trimmed up my beard a bit.  Marilyn came over around 8:25 AM and we all had coffee followed by breakfast.  Linda and I had granola while Marilyn had toast and jam.  She is not that found of breakfast and does not care for milk or milk substitutes.

I removed some of the parts boxes from the back of the Element to eliminate the rattling just in case we decided to drive in to the Desert Bar on the way back from Lake Havasu City (LHC).  We left around 9:15 AM and headed up AZ-95 towards Parker.  It was a cool morning with clear skies and the sun lit up the mountains to the west and north.  When we got to Parker we decided to cross the Colorado River into California and take the Parker Dam Road 17 miles up to Parker Dam, drive across back into Arizona, re-connect with AZ-95, and continue north to LHC.

We knew that the stretch of the River from the dam downstream to Parker had quite a few RV Parks, campgrounds, and mobile home communities because we caught glimpses of some of them from AZ-95, or saw signs for them, the last time we were in LHC.  The drive from Parker to LHC is very scenic but you do not have a view of the river most of the time.  Much of the drive from Parker to the dam on the California side, however, was close to water level so we were able to see the resorts on both sides of the river.  We had also heard that there were wild burros along the California route and indeed there were.  We saw five total, two of them just before the dam.  They appear to be docile animals, but they are wild, and you are not allowed to feed or harass them.

Once we got to LHC we followed the signs for the London Bridge and found the parking lot and visitor center.  We watched a video on the history of the London Bridge, which was actually the second most recent in a long succession of bridges across the River Thames dating back before Roman Times.  The Bridge was purchased, disassembled, moved, and reconstructed in LHC.  It was placed at the entrance to a peninsula and then a channel was dug out under it and connected to the Colorado River on either end, turning the peninsula into an island.  There is an “English Village” at the base of the bridge on the mainland side, which was not very special, but a wonderful pedestrian path winds along the channel all the way down to Rotary Park.  The air was cool and the wind was very strong, but the sun was very warm and we had a lovely stroll.

After walking the path we drove over the bridge and around the island, stopping at one of the reproduction 1/8 scale lighthouses.  The LHC Lighthouse Association has erected some two dozen scale replicas of U. S. Lighthouses.  The ones on the island are all replicas of lighthouses from the Great Lakes while the ones on the Arizona shore are east coast replicas and the ones on the California shore are west coast replicas.  While we were driving Linda researched places we might be able to eat lunch and settled on The Black Bear Diner.  She and Marilyn had garden burgers with French fries and I had the Sweet Garden Harvest Salad.  All of the food was very good, and I was particularly pleased with the salad, which had raisins, dried cranberries, nuts, fresh strawberries, and shredded coconut with a honey Dijon dressing.

The restaurant was in a corner of the parking lot for the Albertson’s grocery store so we went in looking for regular Silk soy creamer.  They did not have any so we started back to Quartzsite and stopped at the Basha’s market on the south end of town.  They had the Silk Vanilla Soy Creamer, not the regular, but I got some anyway.  They also had a nice selection of Daiya cheeses and vegan sausages.  We picked up some sourdough bread and preserves on our way to the checkout.  Of all the food stores we have been in Basha’s was the nicest so far.

By the time we got to Parker I was getting tired so I pulled into the casino parking lot.  I switched places with Linda and she drove the rest of the way to Q.  Back at camp she and Marilyn went to the apartment and started assembling a 500 piece puzzle on the dining table.  As I do on any day that I have taken a lot of pictures I transferred them from my camera to my computer and backed them up to the NAS unit.  I used the Microsoft Image Composite Editor to create two panoramic images of the California mountains just south of LHC.

None of us were hungry enough to warrant fixing dinner so we snacked on hummus and chips (vegan junk food).  Marilyn went back to the apartment at 9 PM and we went to bed shortly thereafter.  A long day of fresh air and sunshine had once again worn us out.

2025/01/25 (N) Visitors

Linda& Marilyn at the London Bridge English village.  It's a real London phone booth, but no phone.

Linda& Marilyn at the London Bridge English village. It’s a real London phone booth, but no phone.

Today was basically a stay at home day.  Marilyn is officially “on retreat” and spent part of the day by herself reading and contemplating.  I made coffee for breakfast, as usual, and Linda made her amazing vegan cinnamon rolls for brunch.  They were brunch because they take hours to make and she did not feel like getting up early enough to have them ready by breakfast and we did not expect her to.

Butch dropped Fonda at church and then came back to get me on his way to the Big Tent RV Show.  Today was the last day of the show so I bought a 2″ wide roll of rescue tape and got three smaller rolls in the deal.  I bought more of the Carnu-B wax but the vendor was out of the Metal Shine cleaner.  That’s the risk one takes waiting until the end of a rally or show.  I also bought two small LEDs that looked like the might work in our spotter/downlights.  We then stopped by Mac McCoy’s booth to chat.  He was busy with customers but Charles Martin was there so we chatted with him instead.

We got back to camp just after 11 AM as Linda was putting the finishing touches on the cinnamon rolls and Marilyn joined us for brunch.  I tried one of the new LED bulbs but it would not fit in our fixtures.  I dealt with some e-mail and thought about spending the rest of the day writing but decided to work outside instead.  My outside task today was cleaning some of the bus windows using the Carnu-B Metal Shine to remove hard water stains.

Chris and Jim of Geeks On Tour did their weekly live broadcast from their rig and then started making preparations to leave.  We had two cinnamon rolls left so Linda took them over as a going away gift.  Charles and Connie Martin dropped in and a short time later Mara and her friend Michael arrived.  Marilyn came over followed by Butch and Fonda so we circled the chairs and had quite a gabfest.

Eventually everyone left and I returned to my window cleaning while Linda and her sister started preparing dinner.  Linda made her wonderful warm Farro dish with kale and dried cranberries while Marilyn made a shredded Brussels sprout dish with pistachios and dried cranberries.  Both dishes were excellent and the use of dried cranberries in each one tied them together nicely.

Linda and Marilyn went to the apartment to watch Downton Abbey but the satellite receiver was not activated so they worked on the jigsaw puzzle instead.  I stayed in the coach and took a call from Lou Petkus who had questions about RVillage.  I then consolidated my blog posts from the first seven days of October (2014) into a single post, selected five photos to go with it, and uploaded it to our WordPress site, the first post I have done since September 30, 2014.  If I do one consolidated post each evening I should be caught up to our arrival in Quartzite on December 12, 2014 in about two weeks.  After that I may go back to daily posts or continue to consolidate three or four days at a time.  I would like to be caught up and making current/daily posts by the time we pull out of here on March 1st.

London Bridge in Lake Havasu City (LHC), AZ.

London Bridge in Lake Havasu City (LHC), AZ.

2015/01/26 (M) A Plethora of Jims

We had toast and jam (strawberry preserves and orange marmalade) for breakfast along with our usual coffee and juice.  Jim A. called just after breakfast to update me on work we are doing for FMCA HQ.  Jim G. (&  Chris) pulled out yesterday.  Jim B. (& Barb) are here for the winter.  Jim L. (The brother of owner Joe L.) manages this place and stops by almost every day.  I think we have met several other Jims along the way.  When we meet someone new I just assume their name is Jim until I learn otherwise.  This winter has truly seen a plethora of Jims.

Jim and Barb let me know they were headed to Blythe, California to go grocery shopping and offered to pick up anything we might need.  Butch and Fonda also left but Larry and Sandy did not, which was unusual for them.  Linda and Marilyn wanted to walk around Tyson Wells so I drove them down to Kuehn Street and Central Avenue, stopping at the Post Office on the way.  I stopped on the way back at Herb’s Hardware store to get some 000 steel wool and then topped off my fuel tank at the Union 76 station.

Connie Martin visiting us at the Camp Liebherrvile / Brocker.

Connie Martin visiting us at the Camp Liebherrvile / Brocker.

Back at our coach I started assembling my blog posts from October 8 through 15 into a single post and selecting photos to go with it.  I do not like to sit and do this kind of work for long stretches of time so I got out my cleaning supplies and worked on the outside of some of the bus windows.  I tried using straight vinegar to clean them followed by rubbing with the steel wool, and tried it in the opposite order.  I decided to stick with steel wool first figuring the vinegar would help clean it off.  I did not apply wax to the outsides of the windows as I want them as clean as possible before I wax them.  Rain was forecast for today and it eventually started so I moved indoors and cleaned the insides of several windows on the passenger side of the coach.  These were clean enough that I used the Carnu-B spay wax that I bought yesterday on them.  The rain let up so I moved back outside and worked on the upper windshields.  I got both of them steel wooled and wiped down with vinegar and got a coat of wax on the driver side glass before it started drizzling again.  I put my supplies away again and headed back inside.  Linda called and asked to be retrieved so I drove back down to Kuehn and Central to pick them up.

Linda put out some hummus, chips, and grapes for lunch and we heated up the leftover Farro dish and divided it up between us.  Marilyn went back to the apartment to take a nap and Linda laid down to read and snooze while I continued working on e-mails and blog posts.  Gary Hatt, publisher of Bus Conversion Magazine, sent me several photos of himself standing in front of his Eagle.  I selected the one I thought would work best to go with his “Publisher’s Letter” in the January 2015 issue, post-processed it several different ways, and sent it back with an explanation of what did and why.  I also got the blog post for the second seven days of October completed and uploaded before dinner.

Mara Culp and Charles Martin visiting us at Camp Liebherrville / Brockner.

Mara Culp and Charles Martin visiting us at Camp Liebherrville / Brockner.

As the afternoon progressed the rain settled in.  Although not heavy, like a thunderstorm, it was steady well into the evening.  Jim and Barb returned and Marilyn eventually came back over to the coach.  That got Linda out of bed and working on dinner.  She made a dish that has become a standard; pasta with onions, garlic, mushrooms, and sun-dried tomatoes lightly sautéed in olive oil.  Instead of wheat noodles, however, she used “zoodles.”  Zoodles are long slender pieces of zucchini made with a hand operated SpiraLife spiral slicer.  They get added to the sauté just before serving and are simply heated rather than cooked.  We had a green salad with Ken’s Steak House Asian Sesame dressing, dried cranberries and pistachios.  We had slices of a sourdough baguette with pepper spiced olive oil for dipping and Linda and I had a glass of Franzia sangria.  Fresh strawberries for desert completed a nice meal.

Marilyn helped with the dishes after which she and Linda checked on the developing storm out east and then played Scrabble and other games while I stayed out of their way and worked on this post.  Hey, it’s a small kitchen.

The rain stopped at 7:38 PM but started again in earnest around 8:30 PM.  It was still raining at 9:15 PM when Marilyn went back to the apartment and the forecast said we could have rain overnight until 5 AM tomorrow.  We have had very little rain here this winter so I am sure this is welcomed.  It will be interesting to see if the precipitation triggers any sort of desert bloom tomorrow on our drive to Yuma or perhaps the following day.

Linda’s iPad battery was down to about 10% at 9:45 PM so she retired to the bedroom, where the charger is located, and continued to read for a bit longer.  I am usually very sleepy an hour after dinner but get my second wind a couple of hours after that.  I had an e-mail from Gary at Bus Conversion Magazine regarding the use of soft water in the Webasto-based Aqua-Hot in his Eagle and sent him a reply.  I then went through the article on Butch’s main engine air-compressor failure, finalized all of the changes, and uploaded it to our Dropbox along with the photo files.  I updated my BCM Article Status Sheet and uploaded it to the BCM folder in our Dropbox.  I then e-mailed Gary and editor Mike Sullivan to let them know that the new material was ready and available.  By the time I finished it was going on midnight.

 

2015/01/21 (W) Quartzfest

Quartzfest 2015 at the Road Runner BLM area south of Quartzsite, AZ.

Quartzfest 2015 at the Road Runner BLM area south of Quartzsite, AZ.

There are so many things going on this week it’s hard to decide what to do.  Linda decided to do laundry right after breakfast because her sister is arriving tomorrow and she doesn’t want to have to do it while Marilyn is here.  The short list included:

  • SKPs Chapter 6 Loose Gathering at Plomosa Road BLM north of town (we are members of Chapter 6).
  • Quartzfest at US-95 MM 99 south of town on BLM land (we are both amateur radio operators).
  • Bluebird Wanderlodge Rally south of town at BLM La Posa South (Bus Conversion Magazine would love to have photos of this gathering).
  • The “Big Tent” RV Show (there are a couple of things we are looking to buy).
Quartfest is where RVing Hams meet up.  There were almost 300 rigs, all with radios and antenna.

Quartfest is where RVing Hams meet up. There were almost 300 rigs, all with radios and antenna.

While Linda was doing laundry I finished up yesterday’s blog post and started today’s post.  A large APS (Arizona Power System) truck pulled into our camp around 10 AM.  Jim L. had contacted them and succeeded in getting them to send someone over to check the power.  They happened to have someone in town already, so he got here, diagnosed and fixed the problem, and was gone before Jim arrived on his bicycle.  We knew the voltage was high and the linesman confirmed that.  The transformer had several tap positions and he was able to change it to provide more windings and reduce the voltage.  We were consistently seeing 127 to 131 VAC (to neutral) on each leg (258 VAC across the legs) and we know it was rising above 132 because it was causing all of our power protection devices to trip, cutting off the shore power.  We are now seeing 118 to 122 VAC (240 VAC across the legs), which is near perfect.

A Crank-IR antenna from Stepp-IR.

A Crank-IR antenna from Stepp-IR.

Butch, Fonda, Jim, and Barb were all gone but I walked over to let Jim and Chris know that the power would be off for about 10 minutes.  I was too late.  The power had already been cut and restored and Jim was outside checking their connection.  Linda was on her way back from the laundry room and we ended up chatting with Jim and Chris for a while.  Chris and Linda went back to what they were doing and Jim L. showed up on his bicycle so we filled him in on the morning’s events.  We agreed to get-together at 4 PM for happy hour and went back to our various chores.

The wind had come up so we decided to use the ratcheting tie-down straps I bought a few weeks ago.  We rigged up two of them between the ends of the patio awning and the anchors we found weeks ago with Butch’s metal detector.  We watched the wind for a while and decided to just put the awning up.  Better safe than sorry.  Been there, done that, bought the new awning fabric (in our previous motorhome).

The Crank-IR fully deployed.

The Crank-IR fully deployed.

With the laundry done and the awnings secured we headed for the southern desert to find the Quartzfest and Bluebird/Wanderlodge encampments.  I set the 2 meter radio in the car to 146.55 MHz simplex mode.  Quartzfest (and RV hams generally) use that frequency for talk-in, info nets, and general contact purposes.  Quartzfest was at the Road Runner BLM Short Term Visitor Area (STVA) just south of Mile Marker 99 on the west side of US-95.  As we were driving down someone called on frequency requesting assistance.  They had just exited I-10 at exit 19 and did not know how to get to Quartzfest from there, so I gave them directions.

When we got there we checked in with the camp host to confirm that we did not need entry permits for a daytime visit.  He directed us to the area where Quartzfest was taking place and we eventually found the check-in station after Gordon West (Gordy), WB6NOA gave us directions over the air.  We met him going out of the sheltered area as we were going in.  We walked around looking at, and photographing, antenna setups and stopped to talk to a few people.  Part way through our stroll I thought I heard someone calling my name, albeit somewhat indistinctly.  I looked back over my right shoulder and realized we had just walked past the Montana 5th wheel trailer and pickup truck belonging to Lou and Val Petkus.  We had a short visit with them and then continued on our walkabout.

That is a Hi-Q HF antenna, just like the one we have but with a different capacitance hat.

That is a Hi-Q HF antenna, just like the one we have but with a different capacitance hat.

With the wind came dust and we decided to drive around the area and then leave to find the Bluebirds.  We headed back towards town as far as the BLM La Paz Long Term Visitor Area (LTVA) and turned east into La Paz North.  The other side of the road was the La Paz Tyson Wells LTVA but we recalled Jim Guld telling us that the Bluebird Motor Coach / Wanderlodge group was at La Paz North.

We drove in quite a ways and eventually found the BMC/Wanderlodge buses.  There were very few people around, and those that were there stayed in their coaches.  One guy came out, probably to see who we were and what we were doing, so we introduced ourselves and explained why were there.  He directed us to the rally organizer’s bus, but he wasn’t there.  There were 28 buses formed into a circle, noses pointed in towards the center, and I shot a full 360 degree panorama from the fire circle at the center.  I then shot at least two photos of each bus from just off either side of the front.  More buses were arranged in a second, incomplete circle outside the main one, but those rigs were more difficult to photograph.

We saw some fairly sophisticated portable ham setups at Quartzfest.

We saw some fairly sophisticated portable ham setups at Quartzfest.  It reminded us of Field Day.

A classic older Bluebird Wanderlodge outfitted for serious desert boondocking.

A classic older Bluebird Wanderlodge outfitted for serious desert boondocking.

Linda was keeping an eye on the time and at 3 PM we started working our way towards our camp.  We were back before 4 PM and I made sure Butch/Fonda and Jim/Barb were invited to join the happy hour.  We all gathered at the appointed hour in front of our coach.  Everyone brought a chair, a snack to share, and a beverage of their choice.  The bus provided some shelter from the strong northeast winds and the very warm late afternoon sun balanced out the chilly air until it set, at which point our happy hour gathering ended.

The Bluebird/Wanderlodge logo done in rocks on the desert floor.  These folks were serious about their gathering.

The Bluebird/Wanderlodge logo done in rocks on the desert floor. These folks were serious about their gathering.

Jim and Chris stuck around to see our coach and we looked at a few videos on YouTube that he made with his Quadcopter mounted Go-Pro camera.  We also introduced them to the music videos of the group “OK Go.”  The groups’ most recent video was shot entirely with a Quadcopter mounted video camera.  We moved over to their rig, which we had not been in before, and ended up talking for another hour.  Some of that conversation was about diet and health.  They still had work to do this evening, and we had not had dinner, so we returned to our coach a little after 7 PM.

While Linda prepared two of the Thai Kitchen noodle soup bowls we keep on hand for such occasions I checked the level of the coolant in the expansion reservoir for the Aqua-Hot.  I had turned the unit off two days ago to let it cool down and most of the coolant in the reservoir had been drawn back in as it did.  There was only about a half inch of coolant in the reservoir so I added some of the 50/50 premix that we carry with us, bringing the level halfway between the “Minimum Cold” and “Maximum Cold” marks.  I turned the burner on, let it run through a full cycle while we ate our soup, and then checked the reservoir as soon as it shut off.  The level was less than an inch below the bottom of the fill cap, so I had guessed correctly how much to add.  I am going to let it cool off again and see where the level ends up.

Happy hour at Camp Lieberville.  (L-2-R): LInda (hidden), the Gulds, Williams, and Brockners.

Happy hour at Camp Lieberville. (L-2-R): LInda (hidden), the Gulds, Williams, and Brockners.

After working on this blog post while my camera battery charged I transferred today’s photographs to my computer, organized them, and backed them up to our NAS unit.  It was yet another long but very satisfying day.

 

2014/08/31(N) By Any Other Name

My first task after breakfast was to sand drywall compound and apply the next coat where needed.  I’m down to touch up work in most spots and so I am trying to apply very thin layers with feathered edges that will dry quickly and require minimal sanding.  The old A-C opening in the library, however, is taking many, many overlapping layers.  Fortunately I can finish that at my leisure as Darryll is not working in that location.  Since he just this week installed the two pieces of duct in the lower part of the wall between the garage and the library I am still building up drywall compound to fill the irregular and, in places, large gaps on the garage side.  Unfortunately, the thicker compound takes longer to dry and watching drywall compound dry is worse than watching paint dry as it’s even slower.  The trick is to have something else to do while I wait.  Fortunately, I have lots to do.

I had some e-mail correspondence on Friday with the publisher of Bus Conversion Magazine, Gary Hall, whose name turns out to actually be Gary Hatt.  He had his reasons for not using his real name when he first took over BCM, which he explained and which made good sense.  BCM is running my article on Suncoast Designers in the August 2014 issue and he sent me a Dropbox link to the draft.  It looks like another really good issue, but is again coming out a month late.  Ever since the editor had a minor heart attack in early May they have been a month behind.  It appears that they will be doing an article on spin-on oil filters in the October issue and will also use my article on the Spinner II centrifugal oil cleaner that Joe and I installed a year and half ago.  I only have one other article ready for them to use, so I guess I need to get busy and write some new ones.

When I am not working on the house, the yard, or the bus, there’s always computer work to be done.  I have multiple projects to work on, but I also like to relax on a pleasant day and catch up on reading the blogs and RV magazines that I follow.  It was very pleasant today so we turned off the air-conditioning, opened up the house, and sat on the back deck reading and watching wildlife.  I addition to our resident American Red Squirrel we were treated to a visit by three Sandhill Cranes.  The squirrel has been busy for most of the month harvesting and stockpiling pine cones in what we presume is a midden under a cluster of very large fir trees northwest of the house.  The cranes spent a long time wandering around the back yard foraging.  We sat quietly and watched them and they came closer to the house than usual so we got a very good look at them.  They are large and magnificent.

I finally decided to continue editing the rough drafts of my blog posts for this month and get them ready to upload.  I still need to select photographs to go with some of the posts, or to put in separate gallery posts, but I finally uploaded the tree photos I took on the 21st to our Dropbox and e-mailed the link to Paul at Detroit Tree Recycling.

I spent some time online searching for sources of supply for an ignition coil for our Aqua-Hot diesel-fired hydronic heating system.  I can get one from Darin, but he quoted me MSRP and it is an expensive part.  I wasn’t having much luck so I called Butch mid-evening to discuss the situation.  He suggested that I hold off on getting a new ignition coil until I got the coach to his place and we were able to look at it more carefully.  He said I should have had white smoke and a definite smell from the atomized but unburned diesel fuel.  I didn’t which made him wonder if the problem might be fuel delivery rather than ignition spark.  Good advice, as always.  I don’t know enough about the control circuitry on the Aqua-Hot (it’s actually a Webasto inside) to know how the operation of the spark and fuel solenoid might be intertwined.  I have the manuals, but I have not had time to dig into them.  Besides, I have enough other things to work on right now that I am willing to let this one go for a few more weeks.

 

2014/08/18 (M) Tasks Menagerie

I woke up early, before 5 AM, so I got up, showered, shaved (not a daily occurrence), got dressed, and sat in the living room to read.  I started making coffee around 7 AM, which provided Linda the clue (incentive?) to get up and get dressed.  Ahhh, breakfast (homemade granola).

No more limbs hanging over the bus.

No more limbs hanging over the bus.

Linda was on tap to babysit in Ann Arbor today and left around 8:15 AM.  I got the Little Giant ladder out of the front bay of the bus and set it up as 14′ extension ladder.  This is the only ladder we own that will get me onto the roof of the bus.  I took a brush to clean off the roof of bus and a pole saw/pruner to trim tree branches encroaching on the bus.  When I was done on the roof I collapsed the ladder and put it back in the front bay as this ladder goes wherever the bus goes.  I trimmed lots of other trees from the ground and then gathered up the limbs into a pile to get them out of Keith’s way so he could cut the grass.  (Monday is grass cutting day this year.)

I wanted to run the Aqua-Hot but discovered we had left the electric heating element on so the coolant was hot enough the diesel burner would not come on.  We have been told by Aqua-Hot service technicians in seminars that the unit should be run at least once a month to keep it in peak operating condition.  I turned the electric heating element off and checked to see what else might be on that wasn’t needed.

I looked at replacing the overflow reservoir with the larger Oasis one I got from Butch, but it would require stand-offs or brackets to clear existing water lines (at least until I rebuild the water bay) and I did not feel like getting involved in that today.  Besides, the overflow reservoir was just below the full/hot mark from having left the electric heating element turned on, so I needed to let the system cool down before I could do anything anyway.

No limbs hanging out into the pull-through driveway.

No limbs hanging out into the pull-through driveway.

I chatted with Keith for a little while after he finished cutting the grass and then had lunch, after which I settled in to work at my desk on the SLAARC WordPress website.  I took a break mid-afternoon and made several phone calls.  My first call was to Heights Tower Systems in Pensacola, Florida to start finding out what I need to get our used Heights tower erected, how to order it, and what it’s going to cost.  My chat with Katie made it sound like they might not be all that helpful.  They need measurements, photos, and the name of the previous (original) owner as a starting point and I said I would send her that information as soon as I could.

I called Paul’s Tree service next to see if Paul Keech might come out and trim our trees.  The gal who answered the phone said Paul was trying to get out of the tree-trimming business but wanted to know if we needed trees trimmed or felled?  We need both, but I was primarily looking for trimming.  I guess that was the wrong answer.  I left my name and phone numbers and asked that he at least give me a call.  I suspect we will have to find someone else to trim several trees in places I cannot reach.

My last call was to EZ-Connector in Tulare, California.  I talked to Joe and was ready to order until he suggested I double check a couple of things first, specifically the number of circuits (wires) I need and the length of connecting cable.  I need to get these parts ordered, but I’m not sure when I will find time to verify these things.

Linda stopped at the Whole Foods Market in Ann Arbor but still got home ahead of the afternoon traffic.  She bought an Amy’s roasted vegetable pizza for dinner which we enjoyed with red grapes and sweet Bing cherries.  I worked some more on the SLAARC website creating pages for business meeting documents and uploading them.  I also uploaded my blog posts for the last five days of July to our personal blog.  I added more projects to my bus project list, got discouraged at its growing length, and went to bed.