Tag Archives: pot luck

2013_08_17 (Sat) BTTB Rally – Day 3

We continued to have a good weather streak for our rally.  Cool temperatures overnight made for great sleeping and the brisk morning air made the coffee taste especially good at 7:30 AM.  The breakfasts are simple, help yourself, affairs with enough variety that everyone can find something they like while no one is burdened with fancy preparation.  A toaster and bagels ensure that a warm breakfast choice is available.

Carl and Cara Muntean’s MCI MC-8.

Carl and Cara Muntean’s MCI MC-8.

As soon as we left the coach to get coffee, a distance of 40 feet from where we are parked next to the pavilion, we realized that two additional buses had arrived since we turned in last night.  Carl and Cara Muntean’s MCI MC-8 was parked alongside the other building, and behind the building we could just see the nose of a late model Prevost H3.

 

Coach Quarters (Mike Middaugh) Prevost H3-45 Marathon Executive Coach.

Coach Quarters (Mike Middaugh) Prevost H3-45 Marathon Executive Coach.

The Prevost turned out to be the 2007 H3-45 executive coach that belonged to Coach Quarters from the Columbus, Ohio area.  Mike Middaugh had the coach in the Detroit area representing Prevost and NASCAR at the Woodward Dream Cruise, and came on up to our rally when he was done with that work.  Mike is a member of GLCC and CCO.

A water distribution manifold, Marathon style, where function becomes art form.

A water distribution manifold, Marathon style, where function becomes art form.

 

This particular H3-45 is a Marathon conversion with an interesting history.  It was in a bad accident and was further damaged while being towed under a low overpass.  It was considered a total loss, and Coach Quarters acquired it.  Mike, however, has been in the converted coach business for a really long time and knew how to get it repaired and back in service.

 

Marty explaining to Graciella who John McCann is and what it meant for his campaign to use this H3-45 executive coach as their presidential campaign tour bus.

Marty explaining to Graciella who John McCann is and what it meant for his campaign to use this H3-45 executive coach as their presidential campaign tour bus.

The final result was a very nice executive coach that Coach Quarters rents out for day use by up to 14 people who need to conduct business while being driven somewhere.  The coach is used to represent Prevost at events, including the Woodward Dream Cruise.  For example, Prevost is the official motorcoach of NASCAR.  The most famous use of this coach, however, was as John McCain’s presidential campaign bus.

 

The H3-45 galley features high levels of craftsmanship and style.

The H3-45 galley features high levels of craftsmanship and style.

Mike positioned the coach by the pavilion and opened it up for rally participants to see, including the interior, the engine compartment, and all of the bays.

Late morning I drove Linda back to our house as she had agreed to babysit our 8-month old granddaughter this evening.  I contacted our driveway contractor to see if he’d had a chance to come look at our problem.  He had been there, and had already formulated a game plan for fixing it that involved some additional material with finer particles to help lock the gravel in place followed by compaction by some heavy roller.  Due to current commitments it will take a week or so for him to get back to the house with material and equipment.  I drove back to the rally site and arrived around 2 PM.

Don tracked me down to see if I was still interested in going to see Bill’s bus barn.  I was, and so were three other folks plus Don.  He arranged with Bill for us to head over.  Bill’s barn has doors on both ends, and a concrete floor with a pit.  The pit is not full length, but more than adequate to work on the underside of one end of a bus at a time.  It’s a “pole barn”, but the main poles that support the 12 foot ceiling are set in from either side, with lower sections on either side for storage.  I’ve looked at enough bus barns at this point to see that a concrete floor with a maintenance pit is probably a necessity.  It would also be nice for it to have an 18 foot ceiling so I can work on the roof, and be long enough for a 45 foot coach with a car attached behind it.  A pull-through design with access roads on either end would also be nice, but not necessary.  What I don’t think we need is the extra square footage for storing as much stuff as the barns I have seen.

GLCC president Larry Baker (standing, rear) conducting a chapter information meeting immediately following dinner.

GLCC president Larry Baker (standing, rear) conducting a chapter information meeting immediately following dinner.

From 4:00 – 5:30 PM was the official “open house”, although most of us had already seen each others’ coaches earlier in the rally.  Dinner was pot luck, with grilled chicken provided as part of the rally fee, and there were lots of good things to choose from.

 

 

Pat Lintner, GLCC National Director, addressing the members.

Pat Lintner, GLCC National Director, addressing the members.

 

Immediately following the meeting GLCC president Larry Baker held a brief information meeting.  Pat Lintner, the chapters National Director, also spoke and gave a brief update on the national convention that was held in Gillette, Wyoming in June and the upcoming GLAMARAMA rally scheduled for mid-September in Goshen, Indiana.

 

CCO meeting about to convene following the GLCC meeting.  President Mark Reid seated, right.

CCO meeting about to convene following the GLCC meeting. President Mark Reid seated, right.

As soon as the GLCC meeting was done most of us moved our chairs over to Mark Reid’s coach for a CCO business meeting.  There was discussion of the upcoming Halloween rally in mid-October, and further discussion about rallies in general.

Some of the CCO members at the meeting.

Some of the CCO members at the meeting.

All of the RV groups/chapters we belong to are facing the same challenge of getting members to host and attend rallies.  No doubt the two things are related and determined in part by peoples’ personal financial circumstances and their general feelings about the economy.  This seems to be a particular problem for groups that are formed around common interests, such as converted buses, rather than a limited geographic area, although even geographic groups are struggling.  Several of us continued to discuss this informally after the meeting, but no one seemed to have a full grasp of the problem or any really good ideas as to what to do about it.

As with every other evening of this rally, the temperature cooled off quickly after the sun went down.  Someone had a “Chinese lantern”.  They lit the firepot and turned it loose.  The flag at the rally site indicated no wind, but as soon as they turned the lantern loose it took off to the west.  It rose to quite an altitude and we estimated that it was moving west at 20 – 30 MPH when we finally lost sight of it.  Most folks turned in for the night after that except for a small group that stayed up and talked until sometime after midnight.

 

2013_07_17 (Wed) Two Steps Forward, One Step Back

Mornings are lovely here this time of year with 5:00 AM temperatures typically in the mid-to-upper 50’s and clear-to-partly cloudy skies.  And so it was again today.  I know, because I was up at 5:00 AM working on our blog and watching the sun rise.

Linda L. holding the tape at the truss peak.

Linda L. holding the tape at the truss peak.

We gathered at the Works site at 7:30 AM, had our circle, and went to work.  Kent and I were joined by Lynn and Linda (the other one) and worked to correct the spacing of the roof truss peaks.  The spacing between the peaks had gradually increased from rear to front so that the ones by the front wall were leaning 3″ towards the front of the house.

 

Bruce and Lynn adjusting the truss peaks spacing.

Bruce and Lynn adjusting the truss peaks spacing.

Linda held the free end of the tape measure on a common reference point while Lynn and I worked our way along the trusses on either side of the ridge, alternately measuring, aligning, and then nailing 16 foot 2x4s to the center upright of each truss to hold the peak in place.  Kent worked from below passing tools up/down and using a board as a push stick and/or lever to help push the trusses into position and hold them while we nailed.  It was slow, careful work, but we got it done before lunch.

Linda L., Lynn, and Bruce, adjusting the truss peaks

Linda L., Lynn, and Bruce, adjusting the truss peaks

Angel and her two children.

Angel and her two children.

This house is being built for Angel and her two children.  As part of her “sweat equity” in the house, Angel organized the preparation of our lunches and got the food to the church kitchen and arranged on the buffet table.

 

 

 

Ron nailing hurricane clips.

Ron nailing hurricane clips.

Ron nailed hurricane clips all day and most of the rest of the team painted siding panels.  The Lindas installed another closet header and the worked with Lynn and Jack to cut and install extensions for the north trusses.

 

 

 

Front porch posts and beams (not)

Front porch posts and beams (not)

Kent and I were originally going to start sheeting the roof, but that had to wait for the truss extensions to be installed.  We switched off and worked on installing the front porch posts and side beams.  These are massive rough milled western Douglas fir (8×8 posts and 4×10 beams) pinned at the top by rebar inserted into drilled holes.  We cut the posts to length and notched the top surface of the house end of the beams using a circular saw and a Sawzall, and cut the rebar with a hack saw.  We cut and installed jack studs to hold the house ends of the beams.  When we finally lifted the west beam into place we discovered it was about a foot short.  Sigh.

A flurry of activity followed for the next hour as Brian figured out that the porch portion of the concrete slab was a foot longer than it was supposed to be, which placed the base pads for the posts a foot farther from the house than they should be.  Kent and I offered some suggestions for how to fix the problem beyond the obvious one of getting two new beams, but even that fix had the downside of a 3-week delay and another $300 in expense.  Brian conferred with Matt and Sandy (the architect), both of whom came to the site. In the end they decided to go with a solution Kent and I had suggested of constructing beams out of 2×10’s sandwiched together.  They decided to use 2×12’s and have us cut them down, but that would have to wait for Brian to get material on site tomorrow morning.

Linda F., Jack, and Lynn, extending and plumbing the north truss tails.

Linda F., Jack, and Lynn, extending and plumbing the north truss tails.

We had agreed several days ago to have a pot luck social this evening at 5:30 PM, with happy hour starting at 5:00 PM instead of our usual 4:30 PM.  Brian came, as did the folks from Castle Rock CO.  It was a warm evening (in more ways than one), and there were several dishes that Linda and I could eat.  Linda made the garbanzo bean salad, which tastes remarkably like egg salad, and is a favorite dish of mine.