Tag Archives: Passwords Plus (CS 2.0)

2015/11/25 (W) T Minus 2 Days

We both got up at 7:45 AM.  My back felt OK when I went to sleep last night but it was not good by morning.  I don’t know if that is a result of being immobile and supine or just the Ibuprofen wearing off.  As painful as it is to get up it feels better once I do.  We both got dressed to work.  Linda prepared raisin toast and tea for breakfast while I positioned myself on the heater pad.  Linda was busy by a little after 9 AM and I was up and about by 9:30.

The first thing Linda did was take out the trash.  She called yesterday and stopped our pickups starting next week.  It took me an hour to finish organizing tools and supplies in the garage.  At that point I turned off the garage furnace and opened the overhead doors.  I started my car and turned it around with the back end facing the garage.  We moved all of the things that were going in the bus outside the larger door.  We then loaded a lot of the stuff into the car.  This is not a permanent arrangement but was merely for the convenience of getting packed for traveling.

I helped get the recycling tubs into Linda’s car.  Late morning she took them to the recycling center and stopped at two different banks to make club deposits.  I took care of some computer-based tasks while she was gone.  I finally got a reply from DataViz regarding a sync problem with Passwords Plus and sent the tech support person (Colin) a copy of the sync log from my computer.  I also managed to register the Sony flash and accessories I bought a month ago.  When Linda got back she made grilled cheese sandwiches for lunch and served them with fresh apple slices.  The cheese was Tomato Cayenne from Field Roast and it made for a tasty sandwich on rye bread from Metropolitan Baking Company.  I had a couple of Ibuprofen for dessert.

We disassembled the temporary work table in the garage and stored the sawhorses out of the way.  We shook out the floor mats (as best we could) and Linda used the ShopVac to vacuum the floor of the larger bay.  We finally had enough room to store her Honda Civic inside for the winter.  That will be the first time it has been stored inside since she bought it in 2007.

[ Photo 1 of 1 – HC – The large bay of garage ready to accept our Honda Civic for the winter.  This is the first time we have been able to put a car in the garage since we moved in to this house. ]

The large bay of garage ready to accept our Honda Civic for the winter.  This is the first time we have been able to put a car in the garage since we moved in to this house.

The large bay of garage ready to accept our Honda Civic for the winter. This is the first time we have been able to put a car in the garage since we moved in to this house.

We rearranged some things in the front of the smaller garage bay to make room for the large trash container, the wheelbarrow, several 10′ lengths of 1-1/4″ plastic conduit, 10 large paver blocks, and the mower deck for the Cub Cadet lawn tractor.  With those things stowed inside the concrete driveway was now free of objects that Kerry could have hit with his snowplow.

The tractor and 18 cubic foot trailer will remain in the yard alongside the driveway where we park the bus.  The tractor won’t start and we had no interest in pushing it uphill through snow.  We found our large plastic tarp the other day so we unrolled it, covered the tractor and trailer, folded the edges under, and weighed the edges down with landscape blocks.  Hopefully it will stay put through the winter.

With sunny skies and the temperature hovering around 50 degrees F I opened the house electrical bay on the bus.  We loaded the four toolboxes onto a hand truck, two at a time, and rolled them over to the bay where Linda got them stacked and pushed in.  We then loaded the two drill cases in front of the toolboxes and I closed up the bay.

Next we opened the passenger side engine bay door and replaced the main engine air filter.  It did not look that dirty but the new one was obviously very clean by comparison.  This air filter is a bit pricey at $130 plus tax but it is so critical to good engine performance that it does not make sense to try and save a few cents by not replacing it or trying to clean a used one and reuse it.

With the air filter changed we then pulled out the chassis battery tray.  It holds four Group 31 lead acid batteries and is very heavy.  It has a very heavy duty slide out tray but the tray is worn and lets the leading edge drop a little bit as it comes out.  That means we had to lift it as well as push it to get it back in.

We applied a 14″ strip of black Gorilla Tape to the horizontal frame member at the top of the compartment opening to prevent metal tools from coming in contact with the chassis, which is tied to the battery ground.  I got this idea from Chuck when I saw that he had done this to their coach.  There was some fine rust on top of the batteries but the connections were all tight and did not show signs of corrosion.  I should probably have cleaned them anyway but we had too much else to do.  I did notice, however, that one of the batteries was from 2009 and the other three were from 2010 so they may be due to replaced.

I opened the doors on both sides of the front bus bay and climbed in.  Linda carried stuff over from the driveway and the living room (of the house) and I figured out how to fit them into the space.  We have less stuff in the front bay then the last two winters but more stuff in the car.  The problem for the bay is that we have things in open topped cardboard boxes so I could not stack things the way I have in the past.

We were done with this phase of the loading process by 3 PM.  I had turned on the main engine block heater and the Aqua-Hot engine preheat loop at 1 PM.  I started the main engine to air up the suspension, leveled the coach, and then turned on the auxiliary air compressor to maintain it at level.  I was getting ready to pull my car around behind the bus so we could hook it up when I realized I should probably move the bus a little bit first to make sure the brakes were not locked up.  I backed it up a few feet and turn pulled it forward a little farther than where it started.  Linda checked the floor and it was level so I switched the suspension back to Level Low to help minimize leaks and hold the pressure.

I continued to let the bus run on high idle while we hooked up the car.  With all of the connections made I opened the air valve that supplies air to the auxiliary braking system in the car and went to the cockpit to activate the various lights while Linda checked them.  Everything checked out as OK.

With the bus still idling we carried the HP Color LaserJet network printer from my office in the basement upstairs and into the bus.  It was heavy and awkward but we got in into the bus.  I had to remove the center cover from between the desk pedestals and we had to get it into its alcove in the left pedestal from the knee space between the pedestals.  I was pleased, however, that it fit very comfortably in that space as the space was designed to hold this particular printer.

Once the printer was in we found the replacement black toner cartridge and put it on board.  Linda also carried the smaller APC UPS up from the rec room to the bus and I put it on the connector cover shelf.  I think there will also be room on the shelf for one of the NAS units.  The newer one is physically smaller but has more storage capacity and is faster but my plan us to take the larger/older/slower one.

We were done with this phase of the loading process at 4 PM.  Our next task was to replace the screen insert from the front door of the house with the storm door insert.  Linda turned her attention to preparing food for our family gathering tomorrow and I stripped the bed, took all of the laundry to the laundry room, and started a load of whites.

My back was making me aware that I had worked it harder today than it would have liked so I took a few more Ibuprofen and settled in on the sofa with the heater pad.  Juniper found my lap almost immediately and stayed there until just before 6:30 PM when I had to get up for dinner.

Linda heated up a couple of Amy’s curry and rice frozen dinners and served them with the remaining kale/almond/raisin salad.  After dinner Linda started packing non-refrigerated food items in paper grocery bags for moving to the bus.  I brought all of my photography equipment upstairs to repack but left that for later.  I went downstairs and pulled two additional sets of BCM issues plus extra copies of some of the issues in which I have had articles.  I boxed the sets, labeled them, and brought them upstairs.

By the time I replied to a few e-mails it was after 9 PM.  We could have worked until midnight but we had both had enough for the day.  I settled in on the living room sofa with the heater pad on my back.  In spite of wearing a knee brace Linda’s right knee was bothering her all day so she took some Ibuprofen and we both went to bed.  We watched Weather Nation for a while and then went to sleep.

Tomorrow will be a long day but of a different sort.  In the morning we will finish loading the bus and I will check/adjust the pressures in all of the bus and car tires.  We are due at our daughter’s house at noon for Thanksgiving dinner and will probably stay until 7 PM. That evening, after we get home, we will winterize the plumbing in the house and spend the night on the bus in final preparation for our departure for Florida the following morning.

 

2015/10/28 (W) Inside Flash

Linda’s iPad alarm went off at 5:45 AM but she did not get up until after 6.  I got up at the same time she did but she was dressed and out the door by 6:15 while I was still stumbling around.  I put on my warm robe, fed the cats, made coffee, and had a banana nut muffin.  After enjoying my coffee by the fireplace I had my orange juice and granola with blueberries.

It started raining overnight and was still raining this morning as the remnants of hurricane Patricia pulled up from the lower Mississippi River and moved north between the river and the western side of the Appalachian Mountains towards the Great Lakes.  The forecast was for the rain to continue through the day and then off and on into tomorrow.  It was a good day to work in the house so that is mostly what I did.  But first I gathered up the trash from the house and rolled the large container to the street for pickup.

The first thing on my self-imposed to-do list was finalizing an order with DX Engineering.  I had already placed multi-packs of two different sized snap-on ferrite beads in my cart but needed to spend slightly more money to get free shipping.  I am not, however, one of those people who is drawn into buying something I do not need just because it is a BOGO item.

I have been planning for quite some time to install a multi-outlet fused DC distribution panel in the front of the bus to provide Anderson PowerPole connections for the various 12V DC accessories such as the GPS.  I had just never made it a priority, which is to say, never taken the time to figure out exactly which product to buy.  I had to go out to the bus to assess the size and feasibility of available areas for mounting.  After looking at all of the options I selected an 8-port unit from West Mountain Radio.  I really wanted a unit with USB charging ports but the only such model they make only has four PowerPole connections, which is not enough.

My next task was to order a couple of items from the Rockler Woodworking and Hardware website.  I have been considering their black, powder-coated shelf brackets for a while.  I made another trip to the bus to determine how much space I had on the wall where the table will go.  It looked like I will have 14 inches of wall space for mounting brackets so I selected the middle of three sizes, which is 12″ high by 18″ deep.  The brackets will support 1,000 pounds each so a pair of them will certainly support the weight of the Corian-topped dining table.  The table is 38″ long and fully supported by 3/4″ plywood underneath, but it remains to be seen if the wall is strong enough to support the table in a cantilevered installation.  If not, we will have to add a leg or an angled support.

The other thing I needed was hardwood veneer to build the three panels that will replace the strip mirrors that were on the lower portion of the outside hallway wall.  I decided to go with the Allwood 2-ply maple and put a 24″ wide by 96″ long roll in the cart.  The three panels will have a finished size of about 22-1/2″ by 28″ so the 8′ long piece should work out just right.  I placed the order and moved on the next thing which was entering account information into our password program.

Our password app is wonderful but frustrating at times as it tries to synchronize via the cloud every time you open it, edit an entry, or create a new one.  By design it keeps our passwords up-to-date on multiple devices, which is why we have it, but it is slow to sync and sometimes appears to hang up.  When it is trying to sync it won’t let me do anything else, so I sit and wait (or make another cup of tea).

Phil called around 12:15 PM, returning my phone message from yesterday, and we chatted for 20 minutes or so.  With any luck he will have stone delivered here on Friday or Saturday and get the driveway put in before Joe gets here next week with his trailer.  Phil, however, is at the mercy of Wayne County inspectors on another job and was not able to work anywhere today due to the rain.  Most of his work is weather and bureaucrat dependent.

I had the leftover squash and quinoa/lentil pilaf for lunch at 12:45 PM.  While I was eating a lone buck wandered through the back yard with what appeared to be a 6-point rack.  It is the first buck (with antlers) that I have seen this year.

I worked on this post for a while and then went to my office.  As much as I needed to work on getting posts uploaded to my blog there were other unfinished tasks weighing more heavily on my mind.  At the top of the list was an article for Bus Conversion Magazine on a 1985 Model 15 Eagle bus conversion that I saw and photographed at the Eagles International converted coach rally in Quartzsite, Arizona back in January of this year.  I met the owners at that time and subsequently interacted with them a bit but then got really busy with my own projects and had to set the article on the back burner.

I was pleasantly surprised to find that the article was farther along than I remembered.  I also had a short narrative and eight photos from the owners that I had not yet incorporated into the article so that gave me additional material to work with.  With only a few short breaks to interrupt my work I pulled together a first complete draft by 6 PM and e-mailed it to the owners and the publisher of the magazine.  Gary (at BCM) wants to run this article as the feature/cover story in the January 2016 issue so the editor needs it before the end of November.  Personally, I need to be done with it at least a week before Thanksgiving.

While working on the article I had quite a few e-mails back and forth with Gary, one of which inquired about my article on The Desert Bar / Nellie E. Saloon outside of Parker, Arizona.  A draft of that article also exists but it is not even a full page of text and I have not yet selected and processed any photos.  I wrote a little bit on The Desert Bar in a March 2016 overview article about our time in Quartzsite.  For a standalone article I will need to say something more/different than I said there.  If the weather continues to be crummy tomorrow I may use that as an excuse to sequester myself in my office, hunker down at my computer, and crank this article out.

One of my afternoon breaks was in response to the doorbell.  It was UPS delivering my order from B&H Photo.  I did not open it right away as I wanted to stay on my BCM article task.  Linda texted me at 3:30 PM to let me know she was leaving the bakery and arrived home about an hour later.  Even though she left the house at 6:15 AM this morning it took her 90 minutes to get to the bakery in Hamtramck.  Wet roads with poor lane markings in marginal early morning light will do that.  Michigan does not do a good job of maintaining its roads.

For dinner Linda made a simple salad of power greens with Ken’s Sweet Vidalia Onion dressing, roasted the white asparagus we bought the other day, and reheated the leftover risotto.  The risotto held up well to being served as leftovers but the white asparagus, which was fresh, was disappointing.  It was tough and we ended up microwaving it.  Linda thought it was bitter, and did not like it, but I think that is a characteristic of asparagus.  We both agreed, however, that it did not taste like much of anything.

While we were relaxing in the living room after dinner I did a search on white asparagus.  Asparagus is a spring vegetable so the stuff we bought probably came from a long way south of the border.  It is grown “underground” by keeping dirt around the stalks; a process known as etiolation, or light deprivation.  It is supposed to be milder than regular (green) asparagus but with a tough, bitter outer skin than needs to be removed before cooking.  The classic German method of preparation is immersion in simmering water with salt and butter until tender.  Now we know.  Eating things out of season may be one of the “benefits” of being globally interconnected but there is a lot to be said for eating local in-season whenever possible.

The power flickered once during dinner and several more times during the evening.  Winds were forecast at 15 – 25 MPH out of the SW gusting to 40 and strengthening into the morning hours as the wind shifted out of the W in advance of a second cold front.  I shut off the color laser printer, the two NAS units, and the Linux box as a precaution but left my laptop on since it runs on its own internal battery.

 

2014/05/30 (F) Outlook Contacts

I have had a Palm PDA for most of the last 13 years, and for most of that time it has been a Palm Tungsten T3.  While I was still working at Wayne RESA it was synced to their GroupWise e-mail and calendar system but also synced to the Palm Desktop software on my laptop for Contacts and Tasks and my Passwords Plus program.  I did not use the Tasks list much, but I did keep all of my personal contacts, and some of my business contacts, on the Palm along with all of my encrypted passwords.  Linda also had a Palm PDA for a while and had it synced to Outlook on her office computer.  Her PDA quit working years ago and never got replaced.  Once she was settled in at the bakery she did not have a need for a PDA.

When I retired I reverted back to using the Palm calendar, which I always liked.  I even installed a new Lithium Ion battery, which was no easy job, to prolong the unit’s life.  But three things have converged to finally spell the end of the Palm era for me: 1) the unrecoverable failure of the Passwords Plus app on the Tungsten T3;  2) the porting of our home Outlook Express information into Outlook 2007 after the loss of our twmi.rr.com e-mail address, and;  3) getting a new laptop computer due to the end of support for Windows XP.

Over the winter we were able to purchase an updated version of Passwords Plus (CS 2.0) that synced through the cloud.  Versions were available that ran on our iPads, Linda’s Samsung laptop, and my then current Win XP Dell laptop.  It is also available for Android (I think) but so far we have not installed it on our phones.  The new PWP apps allowed us to successfully migrate all of our passwords from the old Palm version and make them available on four devices with back-up and synchronization via the DataViz cloud servers.  Just this past week I installed PWP CS 2.0 on my new Win 8.1 machine and got it synced with the other four.  When the passwords are available and secure, life is good.

When we moved from the previous house to the current house last year we lost our long-time home e-mail address.  I took that as an opportunity to export our home address book and all of our personal e-mails from Outlook Express and import them into Outlook 2007 on my Win XP Dell laptop.  Since that time I have continued to build out the address book with contact information, but I still have and use my Palm Contacts.  Yesterday I learned that I could export my Palm contacts in a vCard (.vcf) format.  Further research suggested that I could convert the file to a comma separated value  (.csv) format and then import it into Outlook 2013 on my new laptop.  It would be a lot more work than it sounds as the vcf –> csv conversion would require me to review each entry, but it would still be a lot less work than re-entering everything by hand.

I figured I would need the better part of a long day to accomplish this task, so before rushing into it I decided to do more research.  Today I discovered that there are add-ins available for Outlook that will take my single .vcf Palm output file and import it into Outlook directly, as long as I am willing to pony up the $$.  The idea of spending $20 -$25 for a program I will use once does not sit well with me, but the idea of sitting all day reviewing entries one at a time does not sit well with me either.  If I want to clean up duplicates, I can do that semi-automatically for another $25.  I’m thinking about it.

The calendar is another matter.  The Palm calendar can be “archived” but not exported.  My Palm calendar goes back at least a decade, and this history may just have to remain in the Palm Desktop on the old laptop.  On the upside, once I start using the Outlook calendar I may be able to set it up so I can access the address book and calendar on my Android phone.  That would be nice; I have long enjoyed having my contacts and calendar information “in my pocket,” or “on my belt,” depending on my clothing choices that day.

It was yet another beautiful day today; when Michigan weather is nice, it’s the best.  Linda decided to do some weeding in the front planting beds and I decided to install the new rear-view mirror on the bus.  You just can’t let a day like this go by without doing something outside.  After a little break we decided to work in the back yard.  We had several large pine trees that had large limbs broken over the winter.  I used our pole saw to cut those loose and dragged them over near an old burn pile.  I cut the small branches off, cut up the larger central limbs, and made a pile.  We gathered up some of the dried grass clippings from Tuesday and stuffed them under the limbs and twigs.  We added a few old, large logs to the pile that were laying around in the yard and soaked everything in diesel fuel.  Forget gasoline and charcoal starter fluid; let the diesel fuel soak in (it does not evaporate like gasoline) and put a match to it.  You will get a sustained fire.

After the fire had burned down to a smolder we moved some of the blocks from the rear retaining walls and laid them around the burn pile.  We’ve decided to use some of them to build a fire pit and wanted to see how many it would take to make a circle of the appropriate size.  We plan to build the pit 2 or 3 courses high on the low side.

Kimber, from GM Construction LLC (GM Decks), called to let me know that Gary had taken ill and would not make it out to the house late this afternoon to discuss our pole barn project.  We will try again next week.  Village Landscape Development also did not show up or call today.  I will give Steve a call tomorrow and suggest that we set a firm start date for Monday June 16.

The afternoon mail brought a Jury Summons for Linda for a two week commitment for U. S. District Court in Flint, Michigan starting Monday, June 30.  That interferes with some travel plans we have and will now likely have to adjust.  She won’t be able to find out if she needs to report on the 30th until 5 PM on Friday the 27th.