Tag Archives: Stacy (BCM)

2015/03/01-03 (N-T) Wrapping Up In Q

2015/03/01 (N) Clean Flying

I had coffee and toast for breakfast.  That finished the sourdough bread, which lasted two weeks, and the strawberry preserves, which had been around a lot longer than that.

I spent most of the rest of the morning cleaning the inside of the coach, specifically the tile floor, and putting things away so that there was someplace for two people to sit.  The floor and kitchen counter looked better than they have most of the time Linda has been away.

Heavy rain over the mountains and desert east of Quartzsite and south of Plomosa Road.

Heavy rain over the mountains and desert east of Quartzsite and south of Plomosa Road.

I left a little after 11 AM to drive to Sky Harbor International Airport in Phoenix.  Linda’s flight was scheduled in at 2:35 PM MST but was delayed on departure with a revised ETA of 2:56 PM.  The weather was overcast with intermittent rain; something we have not seen much of since we arrived here in early-mid December.  It is approximately a two hour trip from Quartzsite to the airport so that left me two hours to take care of two shopping errands.  That seemed like plenty of time but I had not calculated in the time required to deal with Sunday noon traffic at a major shopping location.  I needed cat food and had an address for a PetSmart.  I also needed a GE water filter and had an address for a Home Depot.

As I approached the Dysart Road exit on I-10 I saw a Home Depot.  It was not the one I had programmed in my GPS, but it was right there.  Little did I know that the area around that exit was a massive shopping complex that felt like square miles of retail stores.  The Home Depot did not have the GE housing or filter element I was looking for, even though I bought it at a Home Depot in Logansport, IN.  I no sooner got on the highway when I saw the sign for a PetSmart on the north side of I-10.  I took the next exit and doubled back.  In retrospect I should have taken W McDowell Road and snuck in (and out) the back way but I had no way of knowing that in advance.  They had the Hill’s Science Diet Sensitive Stomach and Skin cat food and I bought a 20# bag.  There was a Lowe’s on the same (north) side of I-10 on the west side of Dysart Road so I went there looking for the GE water filter but they also did not have it.

Although I still had plenty of time to get to the airport the delays associated with dense shopping traffic and finding stores led me to abandon my quest for a new water filter.  I didn’t really need it anyway as the filter in question fits in a GE inline housing under the kitchen sink and provides the final filtering for our drinking and cooking water.  It’s a 1 micron cartridge that filters for at least five different classes of things and costs $35 – $40 as I recall.  I think it is supposed to be good for six months of ‘normal’ use.  Our filter has been installed for about four to five months, and has not had that much water run through it, so it should be good for quite a while yet.

I got to the west cell phone lot at 2:38 PM, about the time Linda’s flight was originally scheduled to arrive.  I knew it was delayed because she texted me when she boarded.  I checked the status on my smartphone and it showed the flight arriving at 3:10 PM.  It was a bit latter than that when Linda texted that they had landed.  She called me from the terminal at 3:30 PM and I headed for Terminal 3, Door 5.  I missed the pull-off and then missed the turn-around, ending up six miles east of the airport before I could exit and head back.  I called Linda to let her know but she saw me drive by and knew I was out there somewhere trying to get turned around.  Fortunately the airport was easy to get back to and this time I pulled in to the correct place, looped around, and picked her up.  Another loop-around and we were headed back to I-10 West.

The first serious weather we had was on our last full day in Q.

The first serious weather we had was on our last full day in Q.

Linda picked up a bug yesterday, perhaps just a cold, but she was obviously tired and not feeling well.  She dozed off and on the whole trip back to Q.  The weather had lifted a bit, with the sun occasionally peeking through the clouds, but closed in the farther west we traveled and we encountered light but steady rain for the last 60 miles.  The skies were especially dark, and the rain heavier, as we cleared the last mountain range and made the long descent into the La Paz Valley and took exit 19 into the east end of Quartzsite.  I stopped at the Road Runner Market for a bag of salad greens, sandwich bread, and bananas and then headed to our coach.

It was cool in the coach so I made some hot tea.  I fixed a big salad for dinner after which we were not hungry enough to have soup.  Linda went to bed early while I checked e-mail and then worked on my blog post for the third week of January.  I took a lot of photos that week and did not have enough time left to make selections, process them, and upload the post.  I won’t have time to work on it tomorrow but I will try to finish it on Wednesday and upload it.

2015/03/02 (M) Our Last Full Day In Q

Today was our last full day in Quartzsite, Arizona unless something prevents our departure tomorrow morning.  After our usual breakfast of coffee, juice, and granola we filled out our mail forwarding form for the P. O. Box, signed our tax returns, and got them ready to nail.  We left around 9:15 MST for the post office.  There was a line so we decided to come back later and headed for the UPS Customer Service Center in Blythe, California.  The center is only open for will call pick up from 9 to 10 AM PST Monday through Friday.  We pulled into the parking lot at 8:57 PST and were second in line behind a couple from Alberta, Canada.  I retrieved my package and then had a nice chat with the other couple in the parking lot.

We stopped at Albertson’s for cat litter and a few other sundry items and then headed back to Q.  We stopped at the RV Lifestyles store to buy a repair kit or replacement for the fresh water tank blade valve.  They had both 2″ and 1.5″ and I did not know which one I needed so I left empty-handed.  By then it was after 11 AM MST and we avoid the Post Office between 11AM and 1 PM as those are the hours for General Delivery pickup.  I stopped at the Union 76 station just behind the post office and topped off the tank before heading back to our motorcoach.

Another view of the storm.

Another view of the storm.

We spent the next four hours straightening up the interior of the bus.  Linda sorted through all of the brochures and guides we had picked up and designated most of them as trash.  I consolidated bus parts in cardboard boxes and put them in the car.  I cleaned out the storage space under the bed and we pulled out the air pump for our old Select Comfort air mattress.  The pump went in a big bag and we took it over to Butch and Fonda along with some literature on things to do in/around Yuma.  I reorganized the space under the bed which created room for us to store things.

At 3:15 PM we drove back to the Post Office.  There was a line but it was short and was moving along.  We turned in our mail forwarding form, put postage on a letter to the FMCA Freethinkers chapter treasurer, Dan Fregin, and mailed our federal and state tax returns certified mail with electronic tracking.

Back at camp Linda put a load of laundry in the washing machine.  Fonda had taken Butch to pick up a “desert bug.”  He found a 1969 VW bug for sale that had been modified to be an ATV.  Butch drove it to Bouse with Fonda following him and we made the trip a short time later.  We got to see the dune buggy and the park where they will be the working next season as the managers.

On the drive back to Q we drove through some heavy rain and pulled over at one point on Plomosa Road to take pictures.  We stopped again on AZ-95 to photograph brilliant white RVs against the very dark storm clouds and then finished our return trip to Q.  Linda and Fonda had left a few items on the clothesline to dry when the rains came through so she put them in the dryer.  The laundry was done by 6 PM and we headed over to Crazy Jerry’s for our last meal together for a while.

I got a call from Lou Petkus.  He had just found out that they are supposed to be at the fairgrounds on Wednesday rather than Friday.  He wanted us to check our e-ticket which Linda did back at the bus.  We were definitely setup for Friday entry which means we will not be able to enter and park together.

On the drive back we scouted out places to hook up the car and decided the ARCO station on the east end of town looked like out best bet.  I had e-mails from Stacy indicating that she had finished proof-reading two more of my articles.  I retrieved them from our Dropbox and did the final editing on them while Linda streamed the last episode of Downton Abbey for the season on her iPad using our Verizon MiFi.  She went to bed to nurse her cold and I uploaded the final versions of the two articles and also updated/uploaded my article tracking spreadsheet.  I then headed off to bed too.

2015/03/02 (T) Farewell Q

We arrived in Quartzsite, Arizona on December 12, 2014 with Butch and Fonda Williams and got our buses parked at the Liebherr-Brockner lot on the north central end of town.  Our bus remained in that spot for 80 full days and was there for all or part of 82 days.  We were up at 7 AM to have a cup of coffee and some granola early enough to have time to digest it before we hit the road.

After breakfast I dumped the holding tanks, flushed out the drain hose, and stowed it away.  We were down to 1/2 tank of fresh water so I topped it up.  I then disconnected the water softener and all of the hoses and filter housings that go with it and stowed those away.

And another view of the storm.

And another view of the storm.

We were aiming for a 10 AM departure so around 9:30 AM Jim L. read the electric meter and calculated our final bill.  Linda added in the loads of laundry and wrote a check to cover our obligations.  I shut off the power, disconnected the shorepower cord, and stowed it away.  I connected the chassis batteries, turned on the air supply valve for the engine accessories, and turned on the air valves for the auxiliary air system accessories.  I also checked the oil level in the engine and it was at the ‘full’ mark.

Butch and Fonda were also supposed to leave today for Yuma but when they checked on their reservation they were told the rains yesterday had softened the ground and they should wait a day before coming down.  Larry and Sandy had not returned from Yuma yet, but Butch/Fonda, Jim/Barb, and Jim L. were all gathered to wish us farewell and safe travels.  Jim L. was also there to help me get the bus out of the lot with damaging anything.

The engine fired right up, I switched it into high idle, switched the Level Low system to ride height mode, and lifted the tag axle.  Once the air pressure was fully up (~130 PSI) I dropped the engine back to low idle and got out to do a walk around, checking the suspension height and securing the bay doors.  Linda did her own walk around to verify everything was closed and locked.  At that point there was nothing left to do but pull out.  Jim L. suggested I back up while swinging the noise gently to the passenger side to get a better angle going forward.  I was going to back up a short distance anyway to release the brakes in case they had frozen while sitting.  The humidity has generally been quite low here and the brakes were fine.

I cut the steer wheels hard to the right (PS) and pulled forward aiming for the gap between the concrete patio pad on the left and the Palo Verde tree and light pole on the right.  Jim L. spotted me on the DS while Linda kept an eye on the PS and I made it through with plenty of room to spare.  Once clear of those obstacles I pulled up to the left and straightened out.  I then backed between the park model trailer on the PS and the cactus garden on the driver side with Linda watching the rear of the bus and the street and Jim watching the front and sides.  I backed into the street and then pulled forward so I was not blocking any driveways.  I shut the engine off and then guided Linda has she pulled the car up behind the bus.  Hooking up the car usually takes 15 to 20 minutes or a bit longer if we gave not done it for a while.

We were ready to go for real at 10:35 AM, had one last round of “farewell for now, see you down the road” and finally pulled away at 10:40 AM.

Looking east from AZ-95 at part of the Plomosa Road BLM STVA with heavy storm clouds in the distance.

Looking east from AZ-95 at part of the Plomosa Road BLM STVA with heavy storm clouds in the distance.

I had some concern about the turn from southbound Lollipop Lane onto eastbound Kenoyer with the car attached but Jim assured me it would be fine and it was.  We turned south on Central Ave (AZ-95) to Main Street (BL-10) then east to Riggles Road and south over I-10 to the eastbound entrance ramp.  I got on the accelerator and the bus responded nicely coming up to speed as I merged onto the freeway.  Leaving Q to the east or west involves long, steady climbs of 700 feet and I wanted the speed, RPMs, and turbo boost up going into the grade.

All of my gauges indicated that everything on the bus was running well except I wasn’t sure the air dryer was purging.  When the air pressure in the system reaches the maximum set point the governor actuates the unloader valves, stopping any additional compression, and sends a pneumatic signal to the dryer to open the purge valve and release any water it has removed from the compressed air.  The brief puff of air sounds a little bit like a “sneeze” and is often referred to as such.  I always listen for the “sneeze” when the chassis first airs up but did not recall hearing it.  As we were driving, however, the pressure in the auxiliary air system cycled between ~100 and 130 PSI, indicating that the air compressor and governor were doing their main jobs.  Later, as we were getting ready to pull out of a rest stop, I heard the air dryer sneeze so I finally had confirmation that everything appeared to be working correctly.

The other thing that surprised me was that I never saw over 15 PSI on the turbo boost gauge.  The old gauge only went to 15 PSI but the needle would routinely go past that to the limit of its movement.  I had gathered from the POG and PC forums that 22 to 25 PSI was more like what I should see when asking for maximum power.

The drive over I-10 was nice as the recent rain had changed the appearance of the desert.  Just before coming to the western edge of the Phoenix metropolitan area we took AZ-85 south.  As we did we could see rain to the southeast and wondered if we might encounter some of it.  The run down AZ-85 was flat but there were interesting mountains on either side of us.  We eventually reached I-8 and got on going east.  Much of the drive across I-8 was through the Sonoran Desert National Monument but we could not locate a headquarters for it on any of our maps.  We also drove through rain and started to get a glimpse of the desert in spring.

Not long into our trip Linda used my phone to text Curtis and give him our ETA.  He called back and asked if we could delay our arrival until 3:30 PM as he had a meeting at 2 PM.  Linda found a rest stop on I-8 not too far from I-10 so we pulled in there, had lunch, and took naps.  It turned out to be a picnic area with no facilities but that was OK with us; we are self-contained and it was a lovely day to sit and enjoy the scenery.

The final leg of our trip took 45 minutes.  Linda texted Curtis when we exited I-10 at Sunland Gin Road and he texted back that the gate was open.  Although wide enough for the bus we decided to unhook the toad before going in.  We were going to have to unhook the car anyway as we will have to back up to get turned around when we leave.  Curtis came out to greet us, closed the gate behind us and directed us into a parking spot.  He let Augie out so he could greet us and run around, which he loves to do.  Augie is a small, six year old, white dog who is full of energy but has spent most of his life living in a bus.  Having the enormous yard of the house Curtis is renting to run in is very exciting for Augie and he takes full advantage of it.

Rainbow colors refract from the rain near the center of this scene.  AZ-95 looking NE over the Plomosa Rd BLM STVA.

Rainbow colors refract from the rain near the center of this scene. AZ-95 looking NE over the Plomosa Rd BLM STVA.

Forrest & Mary Clark were already here in their Foretravel U295 so it was good to see them again.  When we crossed paths with them at the RoVers Roost SKP Co-op they were waiting to have solar panels and a charge controller installed.  Forrest said they did not run their generator once while boondocking for five weeks near Quartzsite so their system appears to be correctly sized and working properly.  Randy & Marianne (Boondockers Welcome founders) pulled in about 20 minutes after us.  After greetings and introductions Curtis gave us a tour of what is currently serving as the World Headquarters of RVillage.

The house is hexagonal and sits on a bump out into the northeast corner of a man-made lake.  The house was originally a bar/restaurant, with the bar on the main floor and the restaurant seating on the second level, which was not enclosed except for railings.  The property is extensive because it was once a parking lot.  When the restaurant was closed in the early 1990s the owner converted it to a house, enclosing the upper level and dividing it to make bedrooms.  He retained a portion of it as an outside deck that most of the bedrooms open onto.  Back on the main floor the central bar was converted to a residential kitchen surrounded by an open floor plan with a generous outside deck.  The building still has a functioning walk-in refrigerator that Curtis uses as a pantry.  It is an extraordinary property and the driveway could accommodate eight buses as long as the neighbors did not complain.

Exciting things are always going on behind the scenes with RVillage so one of the perks of crossing paths with Curtis is hearing about them or even getting a sneak peak at some of them.  It is also an opportunity to see the “back end” of the site which has the tools Curtis and his team use to develop and manage the system.

After tours and demos we all stood around on the lawn chatting and enjoying the view and the cool evening air.  Too soon the air was chilly.  Forrest and Mary returned to their motorhome to have dinner while Linda and I did the same thing.  Randy and Marianne had business to discuss with Curtis and hung out with him on the deck a while longer.  They may have gone out to dinner but we did not see them leave or return.

I had turned our generator on to bring the batteries up to charge and so Linda could cook dinner.  She made a green salad and red beans and rice, which went well with the Franzia Fruity Red Sangria.  After dinner we got our technology set up and got online.  Linda is still recovering from the cold she picked up just before flying back to Arizona so she went to bed early.  I checked e-mail and saw that Stacy had proofread another article so I made the final edits to it and uploaded it to the READY folder in my Dropbox BCM Articles folder.  Since we are boondocking I shut off most of the unessential electrical loads and then shut down the generator for the night.

Travel days are exciting but also a bit stressful, especially when we have been sitting in one place for a long time, be that at home or away.  But it felt good to be on the road again and to have landed in such a lovely place for the night.  It’s harder on the cats, who do not like it when the engine is running and the bus is moving, but they came out of their travel (hiding) spots as soon as we were parked and were fascinated by the change of scenery.  We were both tired but it was a good kind of tired.

 

2015/02/24-28 (T-S) Bus Projects

2015/02/24 (T) Little Bus Projects

I went to bed early (for me) last night but slept in until almost 8 AM.  It was cool in the coach and I had cats snuggled up with me enjoying the warmth of the electric heating pad.  When I finally got up I tended to their needs—food, water, and litter—and then tended to mine; fruit juice, granola, coffee, and grapefruit.  It is Tuesday, which is trash collection day, so I gathered up the trash from the kitchen and took it to the refuse container by the curb.  We will only have one more trash collection while we are here and that will likely occur after we have pulled out on Tuesday March 3rd.

I finished up yesterday’s blog post, got dressed, and got to work on my bus projects.  I started by wiping off the spotting on the windows and body from the recent rains.  I thought the reason I spent 40 hours cleaning and waxing the body was so water would run off if it but apparently I was mistaken.  I had also noticed that the wax on the passenger side of the bus had not been fully rubbed down.  I started working on this but without using additional water it just made it look worse so I quit somewhat disgusted with the whole situation and got to work on other stuff.

First up was the dashboard instrument lighting.  For the turbo boost gauge I made a 5 inch extension lead with red #14 wire and insulated female spade connectors on each end to connect to the +24VDC supply wire for the old gauge.  I made a similar lead with black wire for the ground but only put a connector on one end to attach to the new gauge bulb holder.  I used a crimp style speed connector to splice the free end into the existing ground wire which had a fork connector on the end that I did not want to cut off.  I put one of the 24VDC wedge base bulbs in the holder and snapped it into the gauge.

I undid the retaining ring on the speedometer and pulled the instrument out the front of the dashboard.  I thought I had wired the two light bulbs in series to use 12VDC bulbs on a 24VDC circuit but discovered that they were already wired in parallel.  I pulled the two bulb holders out and the bulbs were discolored as if they had been too hot.  I could not determine the voltage rating on the bulbs so I replaced them with 24V ones.  I reinstalled the speedo into the dashboard and put the dashboard cover back on.  I will test the lights the next time I connect the chassis batteries.

I next considered replacing the MAC valve that controls the air shutters for the two A-C compressor/condenser units in front.  I looked at the existing valve and decided to hold off until I could talk to Butch.  He and Fonda had taken off for the day, so that would have to wait.  The valve has a diagram on it that indicates how it operates but I was not completely clear on how to read it.  When I built the new air panel I used identical replacement valves and plumbed them the same as the old ones.  I searched online for “pneumatic valve symbols” and got all kinds of sites.  One of them had a 25 slide presentation on ANSI standard symbols and schematics so I downloaded and studied it.  With my new knowledge I was able to verify that the valve was, in fact, installed correctly.  I figured it was since it seemed to work correctly (until it failed) but it was nice to know for sure.  I am not certain that the three control switches are wired correctly, however, but that is a different project for a different day.

I really did not want to change the entire valve.    I bought the replacement valve from Hei/Tek in Phoenix so I called them for technical support.  They confirmed what Butch suspected; the operator (solenoid) can be changed without replacing the entire valve.  They had a defective valve and offered to take the solenoid off and mail it to me for no charge.  Deal.  I should have it tomorrow so I deferred any further work on this project until the part arrives.

By now it was time for lunch so I made a nice sandwich with toasted sourdough bread, vegan deli slices, Daiya havarti style vegan cheese with jalapeños, lettuce, onions, pickles, veganaise, and honey mustard.

Next up was mounting the turbo boost sensor.  It was a beautiful, sunny day but rather cool so I put on one of my long-sleeve flannel work shirts.  Hey, who said the desert in the winter was paradise?  Oh yeah, I did.  I knew this was going to be an annoying little project and it was.

The turbo boost (intake manifold pressure) sensor is a small rectangular part about 1″ wide by 2″ long by 1/2″ thick.  It has a weatherproof 3-wire electrical connector and a 1/2″ long tube that the pressure hose from the intake manifold slips over.  The sensor is mounted to a somewhat larger flat bracket with a slight bend in it.  The bracket has an angled slot and is supposed to be secured to the back side (towards the front of the bus) of the engine computer mounting bracket by a single bolt that the slot slips over.

No doubt there is an easy (correct) way to mount the bracket, but it probably requires disassembling other stuff to create access.  That was not going to happen, at least not today.  One problem was that there was not a lot of space to get my hands in there to work.  Another problem was that I was working “blind.”  Even though I had a telescoping mirror I could not position it correctly in the available space and I needed both hands to install the bracket.  But the real problem was that the retaining bolt had long ago disappeared and I had no idea what bolt was supposed to be used or if it threaded into a hole or required a nut.

I had looked this up in my engine manual some time ago so I knew where and how the bracket was supposed to mount, but the manual did not call out the diameter, thread pitch, or length of the mounting bolt.  I tried several bolts that I had but none of them where right.  I asked Barb to keep an eye on my tools and bus while I made a quick run to Herb’s Hardware where I bought an assortment of bolts.  None of them fit.

One of my original bolts was “close” but a little loose.  I decided to wrap it generously with Teflon tape to see if I could fatten it up enough to hold.  I reattached the electrical harness, shortened the pressure hose, and reattached it as I would not be able to make these connections after the bracket was mounted.  I finally managed to get the bracket installed and I think my taped bolt will hold it until we get home and I can figure out the correct bolt.  Even if/when I do, there is no good way to get in there and tighten it.  I ended up using a 7/16″ short socket with a swivel adapter and 6″ long drive extension that I turned by hand.  At least it was mid-late afternoon on a beautiful day with abundant sunshine illuminating the west-facing engine bay.

I still have a half dozen projects to take care off over the next four days but it was good to have the dashboard and turbo boost sensor completed.  During the course of the afternoon I discussed with Barb and Jim what I had found about the use of potassium bromide (KBr) to control seizures in dogs and cats.  I really hope they will discuss this with their vet.

I made popcorn for a late afternoon snack and then checked my e-mail to see if Stacy had proofread my Quartzsite 2015 article and deal with any other correspondence from publisher Gary Hatt.  She had called in sick again, so the proofreading was delayed yet another day.  Linda had called while driving home but caught me in the middle of working on the turbo boost sensor mounting.  I called her back around 6:30 PM my time (8:30 PM EST).  She was really tired so we did not talk very long.

At 7:30 PM (MST) I called David Lambert.  David currently lives in a group home in Olympia, Washington (PST).  He has long been the adult best friend of J.C. Armbruster, my best friend from high school (besides Linda, of course).  I met David on a visit to Washington State many, many years ago and we also became friends.  I learned then that David had struggled with bi-polar affective disorder all of his life and it has not gotten better for him with time.  He does not have much contact with people outside of the group home other than J.C., who has really come to his rescue over the last couple of years.  David does not usually have much to say, but I try to let him know that I know he exists.  Tonight, however, he was a bit more talkative and told me about recent visits with his sister Mary Kay from Everitt, Washington and his half-sister Soliel, who is moving to Sacramento, California.  He also like to watch the TV program “Axe Men.”  He is at least a 3rd generation native northwesterner and logging is part of his family heritage.

For dinner I heated up the “Soyrizo” we bought at Albertson’s supermarket.  I diced garlic, shallot, sweet onion, carrot, green and jalapeño peppers and sautéed them is a little olive oil before adding the soy Chorizo and heating it thoroughly on high heat.  It was a filling but tasty dish.  After dinner I resumed working on the photos of Larry and Carol Hall’s GM bus conversion.  By the time I got to bed and turned the lights out it was midnight.

2015/02/25 (W) Another “Little” Bus Project

I was up at 7:30 AM, which seems to be my norm when I’m in bed by midnight.  The local Farmers Market operates on Wednesdays and this would be my last opportunity to buy a loaf of Barry’s Basic Bread.  I skipped coffee and breakfast, got dressed, and counted out enough dimes and nickels from the cup where we store our change to cover the $3 cost of a loaf.

Once I got back to the coach I made coffee and had breakfast and then settled in to finish yesterday’s blog post, which needed a lot of work, and start on today’s post.  Jasper sat on my lap purring and enjoying my attention for quite a long time before moving to the dinette.  Juniper ate breakfast and then stretched out on the passenger seat as she does most mornings.  The cockpit is the part of the bus that gets coldest at night but since we are parked facing east it is the first place to warm up in the morning.  The sun is not coming up due east yet, of course; that doesn’t happen until March 21st, but it is rising more directly in front than it did in late December and much of January.

I still had a list of bus projects to work on, but first I checked my e-mail.  I did not have a communique from Stacy or Gary so I logged in to our WordPress website/blog and replied to a comment Kate had recently posted.  While I was logged in I updated three plug-ins, deleted 80 spam comments, and initiated a Wordfence scan.  I repeated the update process for the FMCA Freethinker and Great Lakes Converted Coaches websites and the South Lyon Area Amateur Radio Club website.  “In for dime, in for a dollar,” and “no time like the present” are phrases that came to mind.

I don’t seem to get started on bus projects much before noon, but that’s OK; nowhere is it written that I have be working on the bus at sun up.  The bus projects still to be done include:

  • Replacing the solenoid operator on the air-conditioning shutters.
  • Replacing the solenoid on the pilot valve that controls the level low front axle.
  • Securing the wheel well body panel just forward of the PS drive axle.
  • Starting the generator and making sure it works by turning on all three A-C units + Starting the bus and making sure everything works, including repositioning the bus and re-leveling it to make sure the Level Low system is working.

Butch and Fonda were gone all morning so I did not know if my operator solenoid had arrived yet via the USPS.  I don’t have time at the moment to sit in a holding pattern so I decided to work on the body panel.  It was being held on by only two screws and a bolt without a nut, so I was able to remove it without too much difficulty.  (When someone says “without too much” it means “with some.”).  Once the body panel was off I could see clearly that it was supposed to be attached at six points plus the bolt that connected it to the next piece of wheel well trim.  Two more things also became obvious:

  1. that the missing screw I had set out to replace could not be reached without removing the splash guard panel in front of drive tires, and
  2. I was going to have to slide under the bus in order to reach some of the screws.

Given that reality, I slid one of my stands under the chassis just aft of the passenger side rag axle.  The chassis was about 1″ above the stand but I was reasonably confident it would keep the bus from falling on me if the passenger side air springs failed suddenly.  I also pulled out one of my large sheets of plastic that make it a lot easier and more comfortable to slide under the bus, especially on gravel.

I had removed and replaced the two splash guards at Butch and Fonda’s house this past fall when we replaced the ride height linkages.  Fonda helped me with that project so we both knew how obnoxious a job it was even with the bus sitting on four chassis stands so I could get under it easily and work safely and comfortably.  But there was no way around it, so the splash panel came off.  We put the body panel back in place but had trouble lining it up with the holes in the chassis.  Where the front top corner attached we could see that an old fastener had rusted into the hole and sheared off, probably when someone tried to remove it.

Someone showed up to talk the Butch and Fonda about their work-camping job for next winter so I continued working alone.  I eventually got the panel secured at all six points plus the bolt and got a nut on the bolt.  I also got the splash guard back in place with the three retaining screws installed.  The fourth mounting point, however, used a bolt with a spacer tube and a locknut and was in a location that made it impossible to install by myself without getting completely under the bus and sitting up by the transmission or pulling both drive wheels off, neither of which was going to happen.  That meant I needed Fonda’s assistance again.

I started putting my tools away and cleaning up my worksite while I waited for Butch and Fonda’s visitor to leave.  He eventually did and Fonda came over to help me with the last attachment point on the slash guard.  Once that was done, again with some difficulty, I put my tool boxes away and locked up the bays and the car.  It took a whole afternoon for what started out as a job to replace one missing screw.  That’s often how it goes with buses.

I washed up (buses can be dirty work) and then worked on this post for a while.  I called Linda a little after 5:45 PM my time (MST) figuring she would be close to being done working for the day.  I figured correctly and we talked for about 15 minutes.  The issue with the generator required a new pressure regulator and some new hoses.  Natural gas operates at 1/2 to 1/3 the pressure of propane and, even though the generator engine is supposed to work on either just by changing an electrical connection, Bratcher Electric said they have seen this delayed failure quite a few times when switching from propane to natural gas.  It is still programmed to self-test on Thursdays at 11AM EST, so we will see if it auto-starts tomorrow like it should.

For dinner I made a mixed greens salad with onion, carrot, green pepper, dried cranberries, honey roasted peanuts, Daiya pepper jack vegan cheese, and Tofurkey brand deli slices cut into thin strips, dressed with Newman’s Own Creamy Balsamic dressing, and a couple of grinds of fresh black pepper.

I was starting to run low on the lightly flavored/carbonated water that I enjoy and we were almost out of raisins which I use on my salads.  I was also out of hummus and Snyder’s Sourdough Pretzel Nibblers both of which are unacceptable things to be without.  I had checked the Road Runner Market here in town a couple of days ago but they did not have any of these products.  Our supply of small paper bowls and plates was also getting low.  The forty mile round trip to Albertson’s in Blythe, California would take 75 to 90 minutes and two gallons of gasoline, costing $5 to $6, but I decided to make the trip after sunset rather than work at my computer.  The left side of my neck and left upper back were bothering me more than usual as a result both of long hours at the computer and working under the bus on the body panel today.

As long as I was at the store I picked up a few things that were not on my list including:  Ken’s Steak House salad dressings, several different fruit preserves, another bottle of honey mustard (with real honey), another pack of Tofurkey peppered mock deli slices, some black grapes, extra chips, and two bottles of Goslings Ginger Beer.  It was an easy run over and back, a nice drive over the small mountain range that separates this part of Arizona from California.  We have not driven around much at night since we have been in the southwest and I discovered that both Blythe and Quartzsite sparkle like gems at night.  On the drive from Blythe back to Q I could easily see all the way to the other side of the valley once I was clear of the pass.  Not only were the lights of the city spread out before me, I-10 was a ribbon of white and red light snaking up the KOFA Mountains until it disappeared over the next pass.  It was quite a sight.

Back at the coach I got all of the groceries moved from the car to the kitchen and put away.  The plastic bags often end up with holes in the bottom because they are so thin so I sorted them according to whether they had holes or not and ended up with five of each.  How convenient.  I put one holy bag inside each unholy bag creating five ready-to-use double bags.  Sometimes I amaze myself.  But I can only bask in the glory of my accomplishments for so long and then I have to get back to the processes of daily life. Tonight that meant cleaning up the dishes from dinner and checking e-mail.  I lose track of time when I am working and it was well after midnight by the time I turned off the lights.

2015/02/26 (R) LiveStream

For some reason I was awake at 7 AM.  I can function on only six hours sleep but I do better on seven.  By eight hours I am uncomfortable and need to get up whether I am rested or not.  Even before I got up I heard engine noses and voices outside and looked to see what was going on.  It took me a moment to recognize Larry and Sandy’s motorhome and then remember that they were taking it to Yuma for a long weekend.  Larry had told me yesterday they were going to do that so they would be in a good position to watch an air show at Marine Corps Air Station Yuma.

It has been getting cool overnight, dropping into the upper 40’s, so I put on my sweat pants and shirt.  We bought these not long after we got to Quartzsite so we would have something easy and comfortable to wear on mornings when it was cool in the coach.

I fed the cats, refreshed their water, cleaned their litter tray, bundled up the trash, ground up some Sweet Seattle Dreams coffee beans, and brewed a pot of coffee.  I got out the two blue blankets and put one on the dinette seat and one on the passenger seat.  Jasper immediately curled up on the dinette blanket and Juniper curled up on my lap while I sat on the coach working on my blog posts for yesterday and today and enjoyed my first cup of coffee.

I like the start of the day; it is one of my favorite times.  I am usually rested and generally relaxed and have the comfort of my small morning routine.  The whole day is in front of me and it is still possible to accomplish something, anything really, but not everything, and sometimes not much.  The end of the day is always more variable.

I only have a few repair tasks left to do on the bus plus one or two on the car.  Bus-wise, I need to:

  • Replace the solenoid operator on the air-conditioning shutters.
  • Replace the solenoid operator on the pilot valve that controls the level low front axle.
  • Replace one of the driver side headlights (it has a small hole in it).

Car-wise, I need to:

  • Replace the two auxiliary tail lights in the car.
  • Wash and wax the car.

Although I have most of the parts I need I was expecting another solenoid operator for the shutters to arrive in yesterday’s mail.  It did not, so I hope it arrives today as I really do not want to replace the whole valve nor do I want to disassemble the new one, even though I’ve been told that it is OK to do so.  I think the headlight can wait until I get home, but I need to see if I have one with me.

The other things I have to do are not maintenance/repairs, just routine checks to make sure that we, the car, and the bus are ready to roll on Tuesday.  These include:

  • Starting the generator and making sure it works by turning on all three A-C units + some additional load(s).  That will also verify that the air-conditioners work.
  • Starting the bus and making sure everything works, including repositioning the bus and re-leveling it to make sure the Level Low system is working.

The things that will wait until Monday include checking/setting all of the tire pressures, which I will do on Monday morning, and making sure the hitch and tie bar are ready to go.

While I was working on this post I got a call from Joe Cannarozzi, the mobile mechanic who has maintained our bus chassis, generator, and some aspects of our main engine for the last four years.  He is still in Mississippi but starting to arrange his spring service calls enroute to his summer job in upstate New York.  Unfortunately it looks like he will be in Michigan in early April and we will miss him this time around.

By the time I finished breakfast it had warmed up enough in the coach to take a shower.  I then started a load of laundry and settled in to upload some blog posts from early January.  I decided to keep doing consolidated posts and started pulling together the ones for January 1st through 7th.  I selected nine photos from these dates and processed them.  My work was frequently interrupted by the three loads of laundry I was doing and some necessary housekeeping.

The water level in our fresh water tank was indicating below 1/3rd so I checked it visually.  It was at 1/4 so I filled it, which took about 90 gallons.  I tested the water coming out of the softener for total hardness (TH) using a test strip from each bottle as I wanted to make sure the strips gave me the same reading.  They did, and it was somewhere above 0.0 and below 1.5.

As the tank was nearly full I noticed water on the floor of the bay and determined that it was coming from the fresh water tank drain valve.  I soaked up the water that was there and tried moving the valve quickly open and then closed to see if that might clear a small piece of debris or somehow “seat” the valve.  The leak was not coming out the drain pipe onto the ground.  It was seeping around the top of the valve housing but I could not determine if it was coming from a seam or around the metal rod that comes out the top and attaches to the knife blade inside.  This is a 1-1/2″ diameter valve of the type used on smaller RV waste tanks, especially grey water tanks.  I will check in the morning to see if it leaked overnight and probably make a trip to several of the RV stores here in town to see if I can locate a spare valve.  I won’t be able to attempt a repair, however, until the tank is almost empty so I only have to dump (waste) a small amount of softened fresh water.

Interspersed with my blog work I had some pretzel nibblers and sun-dried tomato hummus and eventually ate a grapefruit.  I did not feel like fixing anything fancier so that constituted lunch.  Butch and Fonda left at 1:45 PM to check the P. O. Box and then go to a meeting of the Quartzsite Gem and Mineral Club.  They stopped at the post office on the way hone but there was no package for me.

Linda called at 2:45 PM my time.  She had wrapped up her year-end work at the bakery and was back at the house making a cup of tea before settling in for one more evening of tax return work.  She was fairly confident that she would have everything wrapped up tonight or tomorrow morning.  There was a tentative plan in place for her to babysit Madeline Friday evening so Brendan and Shawna could go out.  Plans were also in the works to attend a women’s gymnastics competition at the University of Michigan on Saturday and then go to dinner.  She did not mention whether Meghan would be joining them.

Sometime during the afternoon I got the last load of laundry out of the dryer and put away.  I took a break from working at my computer around 6 PM to sit and chat with Butch and watch yet another gorgeous Quartzsite sunset.  In spite of a cooler air mass the sun was very hot today, but once it started to set the air temperatures asserted their presence and we eventually retreated to our coaches for the evening.

I continued working on my blog post, checking e-mails as they popped up.  I had one from Gary with my Quartzsite 2015 article attached.  Although Stacy had not made it into work she was feeling well enough to edit it at home.  I had planned to view a live Technomadia chat on “Making Connections on the Road” at 7 PM but forgot to tune in.  I realized my oversight around 7:30 PM and joined the event in progress, but first I had to create an account with the LiveStream service which involved the usual e-mail verification process.  But it was quick and I got to see/hear the last 20 minutes of the event which was mostly Q&A.  The whole thing was archived, however, so after it ended I nuked a vegan hot dog for dinner and then replayed the part I had missed.

I had not yet made the bed so I took care of that and then resumed working on my blog post.  I finally uploaded the post sometime around 10:30 PM and by the time I uploaded and captioned the photos, created all of the tags, and clicked the “publish” button it was after midnight.  Rather than wait until tomorrow, I went through Stacy’s edits of my article, accepted most of them, and rewrote a couple of awkward sentences.  I uploaded it to the BCM folder in my Dropbox and then e-mailed Mike (editor) and Gary (publisher) that it was there along with all of the photos.  I also e-mailed it back to Stacy and Gary so she could compare it to the one she sent me.  I got to bed at 1:30 AM, later than I like but with some things accomplished.

2015/02/27 (F) Granola Express

In spite of going to bed so late last night (early this morning, actually) I was up at 7:45 AM.  That was mostly because the cats do not care what time I went to bed.  They have their routines and by 8 PM they figure breakfast and fresh water are way overdue.

Linda called around 9:15 AM my time to ask me about a bucket full of water in the furnace room. The double wall stainless steel flue pipe for the furnace runs horizontally under the floor joists through the furnace room and then through my office above a suspended ceiling and finally out the east side of the house.  Moisture tends to condense inside the pipe and drip out of it at the joints between sections if they are not sealed.  The bucket is there to catch the drips and it was full.  It used to drip on the furnace but Tom from TOMTEK HVAC sealed that gap so now it drips somewhere else.

Linda checked the status of the UPS delivery of the “care” package Linda shipped to me.  It was in Blythe, California at 5:15 AM this morning and scheduled for delivery by the end of the day.  It will be nice to finally have my pillow and once again be able to enjoy Linda’s homemade granola.

After breakfast I checked my e-mail, updated my water usage spreadsheet, and finalized my FMCA Freethinkers 2014 financial statements.  The statements are now ready for Linda to audit, which will take her all of 10 minutes (at most).  I then took stock of my BCM articles that are “in-process” and decided to finish the one on the Turbo Boost Repair and move it to the proofreading stage.  With that done, I started pulling together the next consolidated blog post for January 8 – 14, 2015.

For lunch I made a sandwich with sourdough bread, salad greens, vegan deli slices, vegan cheese, pickles, veganaise, and honey mustard.

The solenoid operator from Hei/Tek in Phoenix was not in today’s mail so something obviously went wrong.  I called Hei/Tek and talked to Brie.  She checked with her shipping department and called me back to let me know it got sent UPS ground to our P. O. Box.  UPS does not deliver to P. O. Boxes so it was sitting in Blythe, California in an undeliverable status.  I gave them our P. O. Box number because she told me on Tuesday they were going to mail it (USPS).  Brie gave me the number for UPS, but it was a national 800 number.  I looked up the local Blythe UPS center but it had the same national number listed.  It also indicated their Will Call hours were M – F, 9 – 10 AM.  I called the 800 number and Jose fielded my call.  He changed the status to “hold for pickup” and we will have to drive to Blythe on Monday to get it.

Somewhat ironically I had a UPS delivery scheduled for today and it arrived around 4 PM.  My part could have been on the truck had I done something about this on Wednesday or Thursday.  The box contained an envelope for Butch and Fonda and a small envelope for me.  My envelope contained license plate tabs and registration cards for both vehicles, and dues check for our FMCA Freethinkers Chapter.  The box also contained my pillow, which I have missed, and four bags of Linda’s homemade granola, which I have really missed.

Since I could not get my part until Monday I decided to take the operator solenoid off of the new valve and put it on the old valve.  This was certainly a faster, easier job than replacing the entire old value/operator with the new valve/operator.  I put air to the shutters and used the low voltage control circuits to test the new operator solenoid and it worked as designed and built.

I settled in at my computer to work on the next consolidated blog post, stringing seven separate posts together and selecting/processing photographs.  I worked on a detailed e-mail reply to Gary at BCM and then worked for a while on another article that has been “in-process” since January.

I was finally hungry around 9:30 PM and heated up an Amy’s frozen Sweet and Sour gluten free noodle dish.  Much to my surprise it was not very good, which is unusual for Amy’s products.  I needed to get up and adjust tire pressures first thing in the morning so I made sure I was in bed with the lights off by midnight.

2015/02/28 (S) Out With A Roar

I got up at 7 AM and debated whether to go ahead and adjust the tire pressures or make coffee and eat breakfast first.  I was a short debate and I won.  It was 8 AM by the time I finished my granola and my first cup of coffee.  The sun was well above the horizon but partially obscured by clouds and the temperature was 57 degrees F.  I put on my zip front work hoodie (sweatshirt jacket) and went out to take care of business.

I turned on the TireTraker Monitor and stuck it in my pocket.  As I removed each sensor it triggered a brief alarm on the monitor.  Most of the bus and car tires were close to correct according to my air pressure gauge, with some slightly over-inflated and some slightly under inflated, except the driver side steer tire on the bus which was four pounds low.  When I put a sensor back on the valve stem it reestablished communication with the monitor.  This is supposed to trigger a new/current reading on the monitor but it appeared to me that all of the displayed pressure values were off, reading high in most cases by 3 – 4 pounds.  I am not convinced yet that this system works the way I was told it does.

With the tires taken care of I disconnected the air hose from the air-compressor and stored it in the tray over the driver side drive wheels along with the air pressure gauge and air chuck.  I disconnected the power cord and rolled it back up on its reel and then put the air-compressor back in its travel compartment in the car.  I then went back inside to have my second cup of coffee.

A wind advisory was in effect for today and through the overnight hours.  Winds were forecast at 25-30 MPH with gusts over 40 MPH and that is what we got.  The temperature barely reached 70 degrees F while the sun played peek-boo with partly cloudy skies all day.  The combination made for a brisk day.  The forecast for Sunday morning through Tuesday noon is for rain, with possibly an inch along and north of I-10, and a flash flood watch from 5 PM Sunday until 5 PM Monday.  February was definitely going out with a roar.

I spent the central part of the day cleaning out the front bay of the bus and re-packing it.  We acquired a few things while we here, most notably supplies for cleaning and waxing the bus, and they had to be stored someplace for travel.  We had kept several cardboard boxes from UPS shipments and I used those to organize the new cleaning supplies and stow them in the back seat of the car.

Butch and Fonda put their mats away yesterday and I should have done the same but was busy with other things.  Jim L. stopped by to use Joe and Connie’s WiFi DSL gateway.  I gave him about 30 pounds of solar salt for his water softener and he helped me fold up our large patio mat.  As I have written here, the solar salt is simply not effective in recharging our portable water softener.  We could use it at home in our residential water softener but it is a heavy, bulky, and inexpensive commodity so it made more sense to leave it here with someone who could use it than to transport it over 2,200 miles.

Jim L. suggested that I pull out by pulling forward, cutting my front tires hard to the right, and angle out between a concrete pad and the Palo Verde tree (bush) by the light pole.  The Palo Verde was hanging out far enough that I decided to trim a few branches so as to avoid any possibility of scratching the passenger side of the coach.

My one little repair project today was to try building a “retaining pond” on the floor of the water bay underneath the leaking fresh water tank drain.  I used self-stick weather seal formed to circles, one inside the other.  I had noticed that there is a small gap where the discharge pipe turns and goes through the floor.  My solution was to contain the water that is seeping from the drain valve in the little retaining pond and give it a chance to flow down through the gap.  We are going to pick up some inexpensive bath towels on Monday to soak up the water.  We can ring them out, line dry them in the dry Arizona air and brilliant sun, and re-use them.

The only outside chores I have left to do to get us ready to leave are to:

  • dump the waste tanks.
  • clean and stow the dump hoses and fittings.
  • top up the fresh water tank.
  • recharge the water softener (maybe).
  • check the engine oil and top it up if needed.
  • check the hitch, tow bar, and cables.

Mid-afternoon I called J. C. and left a message.  He called me back a short time later and we talked for almost two hours.  J. C. was my best friend in high school (Linda had her own special status) and is one of the only people from that period in my life with whom I am still in contact.  J. C. works at Boeing Aircraft as an inspector in the 737 production facility.  He is only a few months younger than me but is looking at age 66 as his earliest possible retirement point.

I also had a call from Pat Lintner.  Pat is the National Director for our FMCA GLCC chapter and is also the Senior VP of the FMCA GLAMA.  He wanted to give me a heads up that Jane Roush, the GLAMA President, would be sending an e-mail later today to all of the GLAMA chapter presidents and national directors regarding a recommendation that the Midwest and Great Lakes areas be merged.  The Great Lakes Area consists of Indiana, Michigan, Ohio, and Ontario and has 21 chapters, the smallest number of any FMCAA area.  The Midwest Area is made up of Illinois, Wisconsin, Iowa, Minnesota, South Dakota, North Dakota, Manitoba, and Saskatchewan and has 24 chapters.  All of the other nine areas have more chapters.  I did, in fact, receive Jane’s e-mail a few hours later and forwarded it to all of the GLCC members for whom I have valid e-mail addresses along with a few additional comments.

The rest of the day was spent doing this and that.  Linda called and brought me up to date on her day.  She went with Brendan, Shawna, and Madeline to Crisler Arena at the University of Michigan Ann Arbor to watch part of a women’s gymnastics competition.  Meghan and Chris met them back at the Fay-Lee house for dinner.  I cleaned up the dishes, mostly silverware that had accumulated over the last few days.  I checked and replied to e-mails, mostly from Gary at BCM.  I worked on my consolidated blog post for the second week of January and had it ready to upload by 11 PM but was too tired to start the process at that hour.