Tag Archives: Jack Hoskins (Duraclean)

2015/05/22 (F) Stuck Nut

Our day started, as it usually does, with coffee and breakfast.  When we finally got to work on our tasks for the day we started by putting various things in the house back where they belonged, many of them having been piled on beds or put in uncarpeted areas while Jack cleaned the carpets on Wednesday.  Linda settled in at her desk to deal with paperwork while I got out our Honda self-propelled lawn mower and finished cutting the grass around the house.  She then turned her attention to straightening up the house and cleaning the kitchen in anticipation of tomorrow’s dinner guests.

I puttered in the bus for a bit trying to figure out how the cabinet above the refrigerator was constructed and might, therefore, be deconstructed but did not solve that puzzle and turned my attention to our Cub Cadet 1000 Series (LT1040) lawn tractor.  The mower deck is badly out of adjustment, sitting very low on the right side even with the height adjustment lever in the highest position.  I wanted to remove it rather than try to adjust it so I could use the tractor to more easily tow the new utility cart around the yard.

I already had the PDF version of the manual on my iPad and studied the directions for removing the mower deck.  It appeared to be an easy procedure that could be done by one person but I had Linda help me.  Once it was out from under the tractor we cleaned it off as best we could.  It had what looked like many years of grass clippings packed into every nook and cranny.  One of the idler pulleys was broken, a wheel was loose and its bracket slightly bent, and the drive belt was in very bad shape.  If we ever want to use it again those things will have to be replaced and repaired.  The suspension mechanism on the tractor will also have to be adjusted.

The tractor is leaking something, either oil or hydraulic fluid, so now that the mower deck is out of the way I will try to identify the location of the leak.  The tractor came with the house when we bought it so it was “free” (in a sense).  It was not in the best of shape, so there is a limit to how much time, effort, and money we will put in to fixing it.  Besides, for now Keith mows the grass and we have the self-propelled Honda walk-behind mower for trimming up the yard, if needed, between major cuttings.

My next task was to get the trailer ball off of the back of the lawn tractor.  The ball had a 2-1/8″ hex base flange and the nut was 1-1/8″.  I did not have a 1-1/8″ socket or a 2-1/8″ open end wrench, so I went to Lowe’s in search of said items.  I found a deep 1-1/8″ impact socket with a 1/2″ drive but they did not have open end wrenches the size I needed so I bought a very large slip wrench.

The nut was initially coming off easily but then bound up.  Even with Linda’s help we could not turn it.  We own a torque wrench that is over 3′ long and will work up to ~800 lb-ft of torque, but it has a 3/4″ drive.  So we went back to Lowe’s to get a 1-1/8″, 3/4″ drive socket.  Fortunately they had one.  While we were there we also bought a 6 gallon pancake style Porter Cable air compressor and a new American Standard toilet seat for the upstairs hall bathroom.  The air compressor is smaller than the 15 gal Dewalt and may fit in the passenger side engine bay.  It has regulated output pressure to 150 PSI so it should be sufficient for inflating the front bus tires.  The toilet seat was the right shape but the wrong color, so it will get returned.

The torque wrench gave us enough leverage to move the nut a bit more but then it bound up again.  I suspect the threads are mangled.  We sprayed some WD-40 on it but it did not help.  I called Butch to see what suggestions he might have.  Heating it might help but I do not have anything that would get it hot enough fast enough.  Plus, the ball/nut are just below and behind the plastic gas tank; not a good place for intense heat.  Butch has an induction heater that would be ideal for this situation, but it is five hours away in north central Indiana.  I asked about a nut splitter but Butch said he has not had much luck with those.  He suggested a large pipe wrench.  They are self-tightening (when used correctly) and could grip the ball directly if needed.  I do not plan to reuse the ball so I do not care if it gets mangled, I just want it off the tractor.  If all else fails Butch said I can cut off the bolt with my Sawzall reciprocating saw.

I had planned to work on computer-based tasks today but was not in the humor by the time I was done working on physical tasks.  Linda made fajitas with sautéed onions and bell peppers, vegan gyro “meat”, and vegan sour cream.  Yum; that’s a keeper.

2015/05/20 (W) Duraclean

Today was carpet cleaning day.  Linda had been picking up the house for the last week getting ready but we still had a lot of last minute stuff to move, including the cats.  We put them in the library along with their food, water, and litter tray.  We also moved their cat “tree” out there.  They were confused and unhappy about the arrangement but we figured it would be less stressful for them than constantly trying to find new places to hide as Jack moved about the house with his big, noisy carpet cleaning machine.

Jack Hoskins runs a one-man carpet and upholstery cleaning business named Duraclean.  Located in Farmington Hills near our previous house, Jack took care of our cleaning needs for the last years we were there.  When we bought the house in Oceola Township we had him clean all of carpets after the painters were done but before we moved anything into the house.  We did not have him clean the carpets in 2014 but had him out today to do all of them, including my office / ham shack, which was under construction when he was here in 2013.  Jack arrived right on time at 8:30 AM, walked through the job with both of us, and then spent most of the rest of the day cleaning.  Jack works hard and always does a nice job.

Once Jack was squared away we bagged up the pieces of carpet and pad from the bus that would not fit in the trash container and took the container and the bags to the curb.”  (We live on a dirt road and don’t really have curbs, but it doesn’t sound right to say we took the trash to the edge of the street.)  We then unloaded the box from my car with the garden trailer I bought at Lowe’s yesterday, opened it, removed all of the parts, and assembled it.  Linda broke down the cardboard packaging, gathered up some other cardboard and our usual recyclables, and we loaded them into my car to take to Recycle Livingston later.

Keith Kish (Kish Lawn Care) showed up mid-morning to finish cutting our grass.  His Hustler zero-turn riding mower was not repaired yet but he borrowed an articulated stand-behind mower from his son.  Something failed in the hydraulic pump on his Hustler and blew a 1 inch hole in it.  The cost to replace the pump and put the mower back in service will be significant but his business is primarily based on that machine.

I mostly puttered in the bus while Jack worked in the house and Keith worked in the yard.  Linda eventually went to the recycling center and then stopped at Lowe’s to buy some plants, pots, and potting soil.  She is going to try growing some tomatoes, which are one of her favorite summer things, and some herbs.  She moved the hummingbird feeder away from our deck and hung it on a stand in the shade of a tree we can see from our outdoor table.

I boxed up the ceramic tile pieces that were still spread out on the floor of the bus and moved the box to the garage.  That stuff is heavy!  I turned on the chassis batteries so I could move the driver’s seat forward to get access to the seatbelt attachment bolts.  I unbolted the two seatbelt straps and removed them so I could remove the last pieces of the old white carpet from behind and next to the seat.  I then reattached the seatbelts, moved the driver’s chair back, and turned off the chassis batteries.  Refinishing the area around the driver’s seat will be its own special challenge and may not get done with tile as I may need something more flexible.  It will not, however, be heavy carpet intended for use on floors.

My next task was to remove the flexible duct adapters from the HVAC chases.  One of them has an AC electrical cable passing through it, so I will have to undo the cable from a nearby outlet box to get the adapter free.  While I was working on these relatively minor tasks I was also thinking about furniture options.  It finally dawned on me that we did not have buy an expensive custom made sofa-bed or use chairs instead and try to figure out how to finish that area.  I could build a simple but very effective sofa out of wood and have a bottom and back cushion made to the exact dimensions we need using a fabric of our choice.  That opened up the possibility of the fabric matching whatever we get on the chairs.  The seat cushion could double as a bed for one person, with the back cushion removed, and the seat could hinge up to reveal a large storage area rather than dealing with the complexity of a drawer on suspension glides.  The HVAC supply and return could also be easily be accommodated and I would not have to figure out how to finish the chase or conceal all of the wires that run along the floor in front of the chase.  I discussed the idea with Linda and she liked it.

I moved the dinette table up front and we considered its size and placement relative to the seating we would like to use on the passenger side of the coach across from the sofa. We agreed that one of the things we would do while we are at the GLAMARAMA rally is visit Lambright Furniture in Shipshewana and Bradd & Hall in Elkhart.  We also discussed buying a carpet remnant and trimming it to fit in the front part of the bus while we attend the GLAMARAMA rally.

I called Butch to see how his cataract surgery went on Monday.  Apparently it went well, at least his world is suddenly brighter and more colorful.  We talked through various bus projects, including approaches I might take to get a flat, level underlayment for the floor tile.

Keith wrapped up his work, collected his payment, and moved on to Sean’s yard just north of ours.  I suggested that he come every week instead of every other week as long as the grass is growing as quickly as it has the last two weeks and he agreed.  Keith normally does a nice job with our lawn but was now a couple of days behind schedule and trying to catch up using equipment that was not his.  He did not want to drive the stand-behind mower over or near gravel, so some areas along the pull-through driveway did not get cut.  He was also not able to work around obstructions as tightly as he can with his zero-turn mower, and appeared to not overlap some rows.

Jack wrapped up his work not long after Keith and took off for another short job before calling it a day.  I let the cats back into the house and then decided to get out our self-propelled Honda walk-behind mower and trim up the yard in front of the house and some of the areas Keith had missed.  It took a while to get the mower started but I eventually did.

Linda made a nice salad and baked an Amy’s pizza for dinner.  It was 6:30 PM by the time we finished eating.  Linda gathered up the plastic wine glasses and toilet paper holders she bought yesterday at IKEA and we drove to the store in Canton to return them.  The glasses were too tall to fit in our wine glass display case in the bus and the toilet paper holders did not fit in the places we needed them to go in the house.  While we were at the store we looked at their selection of refrigerators, none of which will fit through the entrance door on the bus, and just wandered through looking for ideas.  We were not up that long after we got home, it having been a long but productive day.

 

2015/05/17 (N) A Tale of Two Sittings.

Our day had two parts.  Part 1 was at home and Part 2 was in Ann Arbor.  The first part started with our normal morning routine:  coffee, breakfast, and iPads.  I put a load of laundry in the washing machine and then checked/replied to e-mails, which I had not done for a couple of days.  We then got busy on tasks and chores.

Linda’s focus for the first part of the day was cleaning and straightening up the house in advance of Jack coming on Wednesday to clean all of the carpets.  Jack Hoskins runs Duraclean as a one-man business and has done our carpets and upholstery for a while.  My focus was the bus and my first task was to carry all of the “stuff” that came out from under the bed into the house.  All of that stuff then went various places downstairs, but not on the carpets.  By the time we finished the morning chores it was almost 1 PM so we had a few pretzels with hummus for lunch.

I only worked in the bus for a few of hours but I got some things done.  First I broke all of the carpet tack strips into pieces small enough to fit in a trash can.  Linda then helped me get the Shop-Vac into the bus and I vacuumed up most of the loose debris.  I had not yet removed the carpet from the right wall of the entry stairs so I did that next.  To remove it I had to take a light fixture loose and remove a piece of upholstered trim from around the bottom door hinge.  The two door hinges have thick rubber covers and after I removed the carpet I pulled back the rubber cover of the lower hinge and measured the width of the opening from the left edge of the door frame to the hinge.  It looks like we have 27″ to work with if needed.  I put the trim back on and re-installed the light fixture.  I then spent the rest of my time pulling carpet pad staples and carpet strip nails out of the plywood subfloor.  Removing the staples was tedious but it was part of what had to be done.

I quit working around 3:30 PM and took a shower and then relaxed for a bit while Linda was busy in the kitchen making a mushroom and power greens risotto.  She often uses barley in her risottos but this time she used Arborio rice which is the type normally used to make risotto.  I really like her barley risotto, but the rice version was outstanding.  After our early dinner I set an alarm on my iPad and we both took short naps.  We up at 5:30 PM and I gathered up my laptop computer, digital camera, and iPad while Linda closed up the house and got her iPad.  At 5:45 PM we were off to Ann Arbor to entertain (and supervise) grand-daughter Madeline while her parents went to a friend’s house for dinner.  We stopped at Whole Foods for some Almond Dream non-dairy ice cream.

Madeline was very excited to see us and showed us her house and back yard.  We went for a short stroll with her in her tricycle and then again in her car.  She had a Little Tykes kitchen playset on the back porch, just outside the real house kitchen, and she made “coffee and tea” for us to enjoy on the veranda.  Brendan has been working on the back yard and slowly but surely getting it into shape.  Yards are a lot of work.

Madeline was a little teary when Brendan and Shawna left but she settled down quickly as Linda got her engaged with some of her puzzles.  I sat on the floor with her and helped build the giant animal puzzles.  (The puzzles are large and have large pieces, they are not puzzles of giant animals, although giraffes are rather large.)  We learned that lions are nice but we do not pet “dinos” (alligators).

Linda prepared a bedtime snack for Madeline of grapes, strawberries, pineapple, and crackers and we had a few grapes too.  By 8 PM Madeline was tired and Linda got her ready for bed, which is a whole routine unto itself.  While they did that I got out my computer and set it up.  I checked my e-mail and then copied the photos I had taken since May 1st from my camera to my laptop.  I had photos of the work on the bus from four separate days so I selected a few photos from each day and post-processed them.  I then copied my draft blog posts for May 10 through 17 from my e-mail to separate Word documents and edited all of them.

I was spell checking my blog post drafts when Brendan and Shawna got home around 10:20 PM.  I shut down my computer and we visited while I packed up.  By 10:45 PM we were ready to be on our way.  We drove down in Linda’s car so she drove us home.  It rained several times between 8:30 and 10 PM but riding home we had clear skies in some directions (we could see stars) and lightning in other directions.  The roads were mostly wet and we drove in and out of a few showers.  We were hoping the rain would hold off as we have had a wet week and Keith is supposed to cut our grass tomorrow.