Tag Archives: HFH RV CAV

2013_07_20 (Sat) The Last Day (of building)

Today was the last day of our 2-week HFH RV CAV / SKP BOF build.  It was our 6th day in a row, and was scheduled as a half day.  There was a mix of feelings at circle: satisfaction in what we had personally and collectively accomplished; disappointment that we had not accomplished more; excitement that we were almost done; a touch of sadness that we would soon be going our own separate ways.  It was also clear that most of us had an accumulated tiredness.  But we had one last half day to work, and we had things to finish.  We had one last reminder about safety; don’t rush, be careful on/under ladders and roofs where teammates are working, and watch your energy level.

Installing roof trusses over the front porch.

Installing roof trusses over the front porch.

One crew finished installing siding.  Another crew built a truss-like top for the front wall to fill in for a truss that had to be moved due to the front porch being foot longer than planned.  Lynn and Jack continued sheeting the roof.  Brett, an HFH homeowner, showed up to work and helped Brian lift roof decking up to me so I could hand it to Lynn and Jack.  When they were far enough along, I nailed off the roof sheets with the air nailer.  The Lindas finished the bedroom closet, installed the living room closet, and removed diagonal cross-bracing from the interior.

The house as far as we were able to build it.

The house as far as we were able to build it.

11:00 AM came quickly and we packed up the tools, stacked unused materials, and picked up the site.  The house was not closed in as the windows had not yet arrived on site, the front and rear hip roofs still needed to be sheeted, and the roof shingles had yet to be installed.  But it was clearly a house, and it was structurally sound.

 

After lunch, which included a very nice salad, we all made a final check of the site and then returned to our rigs.  Linda and several others headed to the laundry room and most of us started readying our rigs for departure the next morning.

Matt and Julie.

Matt and Julie.

At 4:30 PM we started gathering for our caravan to Dave and Karen’s house in Big Horn just south of Sheridan.  Dave is a founding member of the Eastern Bighorn HFH affiliate and the current treasurer.  They gave us a thank you dinner and a comfortable place to sit, relax, and be together as a group one last time.  The meal included several vegetable dishes, including grilled beets from their garden.  Matt, the executive director of the Eastern Bighorn HFH affiliate, and his wife Julie were also there.

Wherever/whenever Escapees gather there are hugs all around, and so it was tonight.  It was a nice way to cap off our first HFH build.

The view looking south from Dave and Karen’s back yard.

The view looking south from Dave and Karen’s back yard.

 

2013_07_19 (Fri) The 2nd To Last Day

Today was the last full day of our 2-week build.  Everyone was aware it, but held feelings at bay knowing we still had a lot of work to do and would have time tomorrow to come to terms with the end of our time together.  At circle we were reminded of Steve’s parting safety advice, that accidents on HFH builds are most likely on the last few days while working on a ladder.

Kent and I built and set two beams for the front porch using six 12 foot long 2x12s.  We cut them for length, ripped them for depth, and then notched the upper surface of the house end to fit a “pocket” atop three jack studs.  We then glued them, clamped them together, and nailed them together using the air nailer.  Finally, we drilled a hole in the bottom of each beam to receive the rebar from the top of the post.  Once assembled we set them over the rebar, into the pockets on the front wall, and secured them.  This took us all morning.

The front porch beams being glued up.

The front porch beams being glued up.

Nailing the front porch beams together.

Nailing the front porch beams together.

The front porch beams set in place on top of the posts.

The front porch beams set in place on top of the posts.

Other work was going on at the same time of course.  A female crew cut batten strips to cover the joints where the siding panels meet.  Jack and Linda finished cutting the truss tails on the east wall and a crew continued sheeting the roof in 4’x8′ sheets of 5/8ths OSB.  Once the sheeting was down I finished nailing it off using the nail gun.

An all female crew cutting batten strips on the table saw.

An all female crew cutting batten strips on the table saw.

Lynn and Jack installing the roof decking.

Lynn and Jack installing the roof decking.

We called it a day and were packed and out of there by 2:00 PM.  We headed directly to the Black Tooth Brewing Company and were joined by Lynn and Linda for a beer and two hours of conversation.  Former AT&T managers, they retired a bit younger than some folks and taught scuba diving and underwater photography in the Caribbean and Hawaii.  They started RVing in 1998 and were full-timers until recently.  They have been active in HFH for years and have done many builds, including overseas and previous visits to Sheridan.  Linda also ran the RV Care-A-Vanner desk at HFH headquarters in Americus, Georgia for several years.  And they are just one couple on this team. Everyone on this build has had fascinating experiences and brings with them a willingness to share.

We got back to Peter Ds in time for the 4:30 PM social hour.  Rick and his wife joined us around 5:30 PM.  Rick is the president of the local HFH Board of Directors.  The group finally split up around 6:45 PM.

We went back to our rig, got cleaned up, and finally had a bite of dinner around 7:45 PM.  We then went to watch Brian play slow pitch softball again.

 

2013_07_17 (Wed) Two Steps Forward, One Step Back

Mornings are lovely here this time of year with 5:00 AM temperatures typically in the mid-to-upper 50’s and clear-to-partly cloudy skies.  And so it was again today.  I know, because I was up at 5:00 AM working on our blog and watching the sun rise.

Linda L. holding the tape at the truss peak.

Linda L. holding the tape at the truss peak.

We gathered at the Works site at 7:30 AM, had our circle, and went to work.  Kent and I were joined by Lynn and Linda (the other one) and worked to correct the spacing of the roof truss peaks.  The spacing between the peaks had gradually increased from rear to front so that the ones by the front wall were leaning 3″ towards the front of the house.

 

Bruce and Lynn adjusting the truss peaks spacing.

Bruce and Lynn adjusting the truss peaks spacing.

Linda held the free end of the tape measure on a common reference point while Lynn and I worked our way along the trusses on either side of the ridge, alternately measuring, aligning, and then nailing 16 foot 2x4s to the center upright of each truss to hold the peak in place.  Kent worked from below passing tools up/down and using a board as a push stick and/or lever to help push the trusses into position and hold them while we nailed.  It was slow, careful work, but we got it done before lunch.

Linda L., Lynn, and Bruce, adjusting the truss peaks

Linda L., Lynn, and Bruce, adjusting the truss peaks

Angel and her two children.

Angel and her two children.

This house is being built for Angel and her two children.  As part of her “sweat equity” in the house, Angel organized the preparation of our lunches and got the food to the church kitchen and arranged on the buffet table.

 

 

 

Ron nailing hurricane clips.

Ron nailing hurricane clips.

Ron nailed hurricane clips all day and most of the rest of the team painted siding panels.  The Lindas installed another closet header and the worked with Lynn and Jack to cut and install extensions for the north trusses.

 

 

 

Front porch posts and beams (not)

Front porch posts and beams (not)

Kent and I were originally going to start sheeting the roof, but that had to wait for the truss extensions to be installed.  We switched off and worked on installing the front porch posts and side beams.  These are massive rough milled western Douglas fir (8×8 posts and 4×10 beams) pinned at the top by rebar inserted into drilled holes.  We cut the posts to length and notched the top surface of the house end of the beams using a circular saw and a Sawzall, and cut the rebar with a hack saw.  We cut and installed jack studs to hold the house ends of the beams.  When we finally lifted the west beam into place we discovered it was about a foot short.  Sigh.

A flurry of activity followed for the next hour as Brian figured out that the porch portion of the concrete slab was a foot longer than it was supposed to be, which placed the base pads for the posts a foot farther from the house than they should be.  Kent and I offered some suggestions for how to fix the problem beyond the obvious one of getting two new beams, but even that fix had the downside of a 3-week delay and another $300 in expense.  Brian conferred with Matt and Sandy (the architect), both of whom came to the site. In the end they decided to go with a solution Kent and I had suggested of constructing beams out of 2×10’s sandwiched together.  They decided to use 2×12’s and have us cut them down, but that would have to wait for Brian to get material on site tomorrow morning.

Linda F., Jack, and Lynn, extending and plumbing the north truss tails.

Linda F., Jack, and Lynn, extending and plumbing the north truss tails.

We had agreed several days ago to have a pot luck social this evening at 5:30 PM, with happy hour starting at 5:00 PM instead of our usual 4:30 PM.  Brian came, as did the folks from Castle Rock CO.  It was a warm evening (in more ways than one), and there were several dishes that Linda and I could eat.  Linda made the garbanzo bean salad, which tastes remarkably like egg salad, and is a favorite dish of mine.

 

2013_07_15 (Mon) HFH Week 2

It was 66 degrees at 7:00 AM this morning.  Very pleasant, but it is usually in the upper 50’s at that hour, so we knew we were in for another hot day.  The forecast high was 93 degrees F.

View of Bighorn Mountains to the SW on our drive to the Works site from Peter D's RV Park..

View of Bighorn Mountains to the SW on our drive to the Works site from Peter D’s RV Park.

Although reduced in numbers, our team reconvened at 8:00 AM to continue working on the Works house.  We were only scheduled to go until noon today, but we had significant tasks to try to accomplish.  First was getting the walls plumb and square followed by setting the trusses and starting to wrap the house in Tyvek.

Trusses laid out and ready to lift into place.

Trusses laid out and ready to lift into place.

We learned at “circle” that 4-6 more volunteers would be joining us for the morning.  They turned out to be a group of four, but were an experienced group from Castle Rock Colorado, and they worked right in to the tasks at hand.

Trusses being nailed in place.

Trusses being nailed in place.

Linda and I nailed some wall bracing in place, but we quickly had more bodies than we had tasks or room to work, so I took up my semi-official photographer duties for a while.   Posey , John, Linda and I then went in Brian’s HFH truck to the Poplar Grove site to fetch the 5/8″ OSB roof sheathing.  It was a big stack and if took us two trips.

We learned that being idle on an HFH build is a minor “sin” unless you are “taking a break”, so Linda and I grabbed a couple of shovels and started back-filling the small trenches along the east edge of the slab.  The sun was very hot, made worse by the reflection of light and diminution of breeze from the Tyvek, so we found a shady spot at the northwest corner of the house and moved dirt around until Jack whistled for the team to quit for the day.

We did not get lunch today as it was originally scheduled as a day off and no one expected Angel to arrange food on short notice.  Brian worked with the new crew after lunch to finish setting most of the trusses.  Tomorrow he is supposed to move them to the Woodland house to develop a final punch list and get it wrapped up.  That house has been under construction for almost a year.

It ‘s starting to look like a house.

It ‘s starting to look like a house.

Although not our personally most productive day, the team accomplished most of what it set out to do.  Tomorrow we will finish setting trusses and wrapping the house and should start sheeting the roof.  There is still a lot work to do at the Poplar Grove site, but no indication that any of us are going to work there.

When we got back to our coach we had a light lunch.  We were both surprisingly tired but opted for different solutions.  I took a nap while Linda went for a four mile walk to downtown Sheridan and back.

Jan stopped by around 3:00 PM to see if I was available to work on their Internet connectivity.  She and Kent have a WiFi Ranger X (WFR-X) and it has the same web browser control panel as our WiFi Ranger Mobile (WFR-M), so that was a plus for me.  I suspected that the SSID and Password for the WFR-X followed the same pattern as the WFR-M, but we found the instruction sheet and confirmed that.  They also had a Motorola cable modem (that they had used at a fixed location).  It wasn’t hooked up correctly, but it didn’t matter as cable modems are generally of no use in a mobile lifestyle.  I was able to connect their iPad mini to the WFR-X and reconfigure the password.  We then got Jan’s iPhone and Mac connected to the WFR-X.  Finally, we got the WFR-X connected to one of the public/open/free WiFi networks in the RV park and from there to the Internet.

I suspect that their setup is fairly typical of full-time and extended-time RVers, for whom connectivity has become a significant part of the lifestyle.  Smartphones, tablets, laptops, even cameras, often two of each, create a complex arsenal of devices with multiple methods of connectivity, including cellular, WiFi, and Bluetooth.  Even if you have some understanding of this technology, this is a complex environment that requires active management by the user.  Devices like the WiFi Ranger products (X, Go, Mobile, etc.) appear to add to this complexity initially, but properly configured and used, actually simplify the user experience.

After dinner we watched an hour-long presentation by Dr. Michael Greger, M.D. on the leading causes of death and the preventative and curative effects of a Whole-Food Plant-Based Diet.  You can find it at http://nutritionfacts.org  but if you are not interested in changing how you eat in order to be healthier, you probably shouldn’t watch it as it will just make you unhappy.

 

2013_07_13 (Sat) The House Takes Shape

Our SKP HFH BOF RV CAV team.

Our SKP HFH BOF RV CAV team.

Our HFH team was back on the job this morning at 8:00 AM; our last day as a full team as three of our members would be leaving tomorrow.   Three members went to work at the ReStore and most of the rest of the team worked on building the 76 foot long west wall.  Linda and I worked with the air nailer to tie all of the partition walls together and to the east wall.  Four of the partition walls were built 3/4 of an inch short (floor to ceiling) so we cut 1×4 fillers and nailed those to the top plates.  We were able to stand the west wall up, tie it to the front and rear walls, and temporarily secure it with diagonal braces before lunch, a good morning’s work.  But it was hotter and more humid than we expected, and the whole team was ready to get inside and have lunch in the air-conditioning.

Angel has been coordinating and staging our lunches at the Catholic Church that is a very short walk from the building site.  Today was fried chicken, mashed potatoes, and watermelon, as well as apple and cherry strudel.  She brought two 6″ veggie subs for me and Linda.

After lunch everyone worked to start getting the walls plumb and square.  We made some progress on this, but called it quits at 2:00 PM due to the heat and the fact that twelve of us had volunteered to sell programs at the Sheridan Wyo Rodeo starting at 5:00 PM.  In return for our service the local HFH affiliate is receiving a $500 donation from the rodeo.

The temperature peaked around 90 degrees F in mid-afternoon, but by 5:00 PM clouds had moved in and a strong breeze was blowing.  Linda and I worked at the Rodeo from 5:00 PM until 8:00 PM selling programs and day sheets.  We were stationed at the north end of the main grandstand and were able to view the opening ceremonies, either directly or on the jumbotron screen.  We also got to see the finals of the Indian Relay Races, a wild event in which five riders at a time circle the track three times using a different horse each time and riding bareback.  The horses are retired thoroughbreds, and just one step shy of being wild.  As the main rodeo events began we returned our unsold programs, aprons, and cash.  We walked the midway and then left the fairgrounds in search of French Fries as today was National French Fry Day.  We ended up at MacDonald’s as we did not want to sample the local bar and grill scene on the last night of the Wyo Rodeo.

 

2013_07_12 (Fri) The Bighorn Mountains

Our normal work schedule for HFH is Tuesday through Saturday.  The schedule was changed due to the activities connected to the Sheridan Wyo Rodeo (pancake breakfast, bed races, parade, etc.) and we had today off in exchange for working next Monday.  Angel was throwing a Bar-B-Que after the parade and our HFH team was invited for lunch.  One of the challenges we face when doing group activities is that our food choices are often limited, and sometimes non-existent, unless we bring something.  Such were the food offerings today.

The change in schedule was fortuitous for us as the closing on the sale of our old house was scheduled for 10:00 AM EDT today back in Michigan (8:00 AM MDT in Sheridan).  Our daughter handled the signing of documents on our behalf, but we wanted to be available by phone or e-mail in case anything came up.  Everything was arranged properly, and shortly after 9:00 AM (our local time) we got the “thumbs up” that the transaction was concluded.

Linda and I opted out of the Wyo Rodeo activities and went for an all-day drive through the northern Wyoming Bighorn Mountains.  US-14 and US-14A are National Scenic Byways that we wanted to see, but we had been told, and read, that they were not friendly for large RVs and should be avoided by larger/heavier rigs in particular.

Coming into the Bighorn Mountains on US-14

Coming into the Bighorn Mountains on US-14

US-14 connects Ranchester and Dayton, Wyoming on the east side of the Bighorn Mountains to Greybull, Wyoming on the west side.  It has numerous switchbacks and some 7% and 8% grades, but is used by semis, as we saw today.  We also saw four full-size Prevost buses (H3-45’s) during the day, so we know vehicles that size can use this route if they have enough power to go uphill and good enough brakes to come back down.

US-14A warning sign at Burgess Junction.

US-14A warning sign at Burgess Junction.

Part way across US-14, traveling east to west, is Burgess Junction.  US-14A starts at Burgess Junction and goes north and then west to Lovell, Wyoming.  It has numerous warnings at both ends and along its full length for semi’s, motorhomes, and any other vehicles pulling trailers.  Like US-14, it has switchbacks and tight turns, but the road is good and seemed wide enough to be drivable.  In fact we saw a couple of semi’s along the way (climbing eastbound and going real slow.)  The major hazard is a 13 mile stretch on the west side of the range that features long stretches of 10% grade going downhill when traveling west.  There are several mandatory brake check areas, and a couple of runaway truck stops, which always give one pause for thought.

Observation Point on US-14A.

Observation Point on US-14A.

The summit of this drive was Observation Point at 9430 feet ASL, between Burgess Junction and the turnoff to the Bighorn Medicine Wheel National Historic Landmark.  The Observation Point turnout provides the first view of the Bighorn Valley that lies between the Bighorn Mountains and the Absaroka Range on the eastern edge of Yellowstone N. P.  Clouds were blowing up the side of the mountains from below us, and it was refreshingly cool.

View SW from Observation Point.

View SW from Observation Point.

Open range above 9000 feet!

Open range above 9000 feet!

Approaching the Medicine Wheel turnoff.  FAA facility on top of mountain.

Approaching the Medicine Wheel turnoff. FAA facility on top of mountain.

The car, with Linda at the wheel, handled the road just fine.  Besides the scenery, which was great, one of the reasons we went this way was to see the Bighorn Medicine Wheel, an archeological site that is still in use by Native Americans today.  To get to the Bighorn Medicine Wheel site, we took a steep, narrow, curvy, dirt road 1.5 miles to a U. S. Forest Service station.  Four-wheel drive is not necessary, but four-wheel stop is.

USFS station at the Medicine Wheel.

USFS station at the Medicine Wheel.

From the station parking lot there are two gravel roads, one to the FAA facility on top of the mountain you see driving in, and another one that goes to the actual Medicine Wheel.  The road to the Wheel is closed to all vehicles except those displaying handicapped tags, so we hiked the final 1.5 miles.  The USFS station is at 9500 feet ASL and there is some up and down before reaching the Wheel at 9,956 feet ASL, which makes it the highest medicine wheel in North America.  The sun was intense when not obscured by clouds and parts of the road were exposed to wind, which was strong.  The air temperature was very cool, but we walked briskly and were comfortable.

A view from the road hiking to the Medicine Wheel.

A view from the road hiking to the Medicine Wheel.

The final climb to the Medicine Wheel.

The final climb to the Medicine Wheel.

Yup, we were pretty high up.

Yup, we were pretty high up.

Note: We forgot to bring jackets.  Rule number one about any mountains, always bring adequate clothing.  Rule #2; wear adequate hiking boots or shoes.  Rule #3; bring water.  We missed on all three today,  L but I was recalled having learned some years ago in wilderness survival training that most cases of hypothermia occur between 40 and 60 degrees F, particularly when people get wet (or sweaty) in a windy situation.

An aerial view of the Medicine Wheel (from a display board).

An aerial view of the Medicine Wheel (from a display board).

The Bighorn Medicine Wheel is an archeological site because its construction and initial use pre-dates any written record or oral history of the area.  The best estimate is that it was constructed around 1200 C.E. by people who had subsequently disappeared from the region long before “modern” Indian tribes moved in.  It is made of rocks placed on the ground in the shape of a wheel 80 feet in diameter with 28 spokes, making it the largest medicine wheel in North America.  It has a rock cairn at the center hub, and six smaller cairns spaced around the perimeter.  Its origin and purpose are unknown, but the nature of the site suggests that it served both astronomical and spiritual functions, and it is the later that continues today.

Approaching the Medicine Wheel.

Approaching the Medicine Wheel.

The Bighorn Medicine Wheel is worth the trouble it takes to get there, but like many archeological sites, you might be underwhelmed if you don’t understand what you are going to see and appreciate when/where/how/why it was built.

The spokes and cairns of the Medicine Wheel.

The spokes and cairns of the Medicine Wheel.

The view to the west from the Medicine Wheel.

The view to the west from the Medicine Wheel.

Besides the Wheel itself, we experienced being above the tree line and above the base of some clouds.  The views were magnificent in all directions, and although it was hazy to the west, we could clearly see the Bighorn River valley spread out below, and the Absaroka mountains of the Yellowstone N. P. area on the other side of the valley over 100 miles away.

Bruce at Medicine Wheel.

Bruce at Medicine Wheel.

 

As we backed out of our parking spot I heard a loud screech.  I got out of the car and checked each wheel position as Linda moved the car backwards and forwards.  The screech was coming from the passenger-side rear disc brakes.  I tapped on the caliper with my hammer and gravel fell onto the inside of the wheel rim.  I repeated this until I stopped getting gravel.  Linda tested the brakes again, and they were fine, another example of a potential problem resolved.  We pulled out and headed for Lovell, Wyoming, the western terminus of US-14A.

Brake check ahead on US-14A!

Brake check ahead on US-14A!

The drive from the Medicine Wheel turnoff going west is where US-14A becomes a challenging drive with a long stretch of 10% downhill grade.  There are brake check turnouts, and runaway truck ramps, and just to make matters more interesting, as if the scenery weren’t distracting enough, it’s open range.

10% grade on US-14A!

10% grade on US-14A!

More open range on US-14A!

More open range on US-14A!

As we came out of the mountains into the Bighorn River valley, we left the Bighorn National Forest and entered the Bighorn Recreation area.  The river is obviously dammed somewhere and we crossed the reservoir and headed towards Lovell.

Bighorn Rec Area Reservoir.

Bighorn River Recreation Area Reservoir.

Before we got to Lovell we stopped at the Bighorn Recreation Area Visitor Center, and made some follow-up phone calls pertaining to our house sale.  By then it was almost 2:00 PM, so we found a Blimpies Sub Shop in Lovell and split a veggie sub.  Wyoming 37 heads north out of Lovell along Bighorn Canyon, which we would have liked to see, but our return route to Sheridan was via US-14, so we took US-310 south to Greybull, Wyoming.  Although not marked as a scenic drive, this stretch of US-310 was very interesting.  Except along the Bighorn River and Shell Creek the valley is arid and reminded us of the dessert southwest; stark but beautiful in its own, otherworldly way.

Heading into Shell Canyon.

Heading into Shell Canyon.

We headed east on US-14, and stopped in  Greybull to change drivers as Linda’s right hip and leg were bothering  her.  (This tends to happen if she drives for too long.)  We crossed the river and started climbing back up into the Bighorn Mountains.  As we got into the mountains we found ourselves following Shell Creek along the floor of Shell Canyon.  This stretch of the highway was very dramatic, and the roadway was somewhat narrower with tighter blind curves.  Eventfully the road left the floor of the canyon and climbed up the sides of the mountains, getting more and more dramatic with each bend in the road, the canyon walls and mountain peaks still looming high above us.

Shell Canyon.

Shell Canyon.

Shell Falls Visitor Center.

Shell Falls Visitor Center.

On both US-14 and US-14A we often had the road to ourselves, and even the scenic pullouts were often empty.  Thus we were surprised when we came upon the Shell Falls Visitor Center.  The large parking lot was almost full and the place was crawling with people.  (So that’s where everybody was!).  We pulled in anyway and watched a Trafalgar Tours Prevost H3-45 disgorge a large number of sightseers.  (We saw four 45 foot tour buses on US-14, so large RVs can obviously do this route as long as they have the necessary power and braking.)  We waited in line to get our “passport” stamped and then hiked around the site, which was actually quite stunning.

Nearing the top of Shell Canyon.

Nearing the top of Shell Canyon.

After leaving Shell Falls, the road continue to climb and the canyon eventually gave way to the broad mountain meadows that cover the top of this part of the Bighorn Mountains.  The grade on US-14 reaches 7 – 8% in places, but takes more miles to change elevation than US-14A does.

 

On top of the Bighorn Mountains (almost).

On top of the Bighorn Mountains (almost).

We went through Granite Pass at 9033 feet ASL, and started our descent towards Burgess Junction, and eventually Dayton, Ranchester, and finally back to Sheridan.  The whole trip was approximately 240 miles and took about 9 hours.

 

 

 

Although it was 6:00 PM when we got back to Peter D’s RV Park, four members of our HFH team were having an extended social hour so we poured a couple of glasses of wine and joined them.  Dinner could wait.

 

2013_07_11 (Thu) We Finally Got To Use “Guns”

The team receiving the daily building instructions from Brian at "circle."

The team receiving the daily building instructions from Brian at “circle.”

The forecast for today was partly cloudy with 60% humidity and a high of 100 degrees F.  Most of the team was at the Works site and ready to go by 7:00 AM.  The main task today was to set all of the interior partition walls, nail them to the (concrete) floor, and tie them together.  Additional work included building the front wall and beginning to assemble the west side wall.

Assembled partition walls ready to be installed.

Assembled partition walls ready to be installed.

There was other work, of course.  At 9:00 AM six of us went over to the other building site at Popular Grove to load the roof trusses for the Works house onto a 2-ton flatbed truck.

Retrieving roof trusses from the Poplar Grove building site.

Retrieving roof trusses from the Poplar Grove building site.

The roof trusses.

The roof trusses.

When the truck got back to the Works site, everyone pitched in to unload and stack the trusses.

Unloading the roof trusses.

Unloading the roof trusses.

When it was time to install the partition walls, I volunteered to use the RAMSET to nail them to the floor.  This tool is a gun that takes special hardened nails and drives them using a .22 caliber blank.  This RAMSET was a single shot model that had a pump action for the firing chamber.  With the chamber open, a nail is loaded into the barrel and then a .22 blank into the firing chamber.  The pump slide is pulled back to close the firing chamber and cock the firing pin.  The tip of the nail must be pressed into the wood to release the safety interlock.  The trigger can then be pulled to drive the nail through the board and into the concrete floor.  Sliding the pump forward opens the firing chamber and un-chambers the spent shell so it can be removed.  We try to keep our worksite clean as we go, so I put the spent shells in a tool belt pouch rather than ejecting them onto the floor.

Installing the interior partition walls.

Installing the interior partition walls.

After lunch a couple of our team members went to work at the ReStore, and seven others went to help Matt load a trailer and pickup truck with donated materials from a closet organizer company that went out of business.  That left half of our team at the Works site, some of whom (including Linda) continued working on the 76 foot long west wall which is being built in three sections.

Bruce connecting interior partition walls together.

Bruce connecting interior partition walls together.

The partition walls still needed to be pinned together, so John, Bruce (the other one) and I worked on that.  Brian finally got the air-powered framing nailer and air compressor out for this task as we had to hold pieces in alignment and then nail them at awkward angles while standing on a ladder.  I did the ladder work with the nail gun, so that was my second use of a “gun” today.  Now I really feel like I am in the west!

 

Discussing the plans with Sandy, the architect.

Discussing the plans with Sandyy, the architect.

We wrapped up at the Works site by 2:00 PM as planned but were asked to join the rest of the team at the ReStore to help unload the donated material.  That made for a longer day, and everyone was beat by the time we finished.  But we accomplished a lot, and that felt good.

 

 

We did not go for a walk as we were very tired and I had to sanitize our fresh water system as the water in the fresh water tank had turned rather foul.  We try to travel with fresh water “just in case” we need to boondock or pull of to the side of the road and use the on-board facilities.  What we have discovered, however, is that the water can only be left in there for so long, especially with long, not days, before it goes bad.  I started the sanitizing process around 3:00 PM.

Sanitizing a fresh water system on a RV involves the dumping, adding, and pumping of water along with the use of chlorine (household bleach) and the removal/replacement of carbon filters, which will be overwhelmed and ruined by running chlorine through them.  The process takes time and uses (wastes?) water because the chlorine has to be diluted to the proper concentration (1/4 cup per 15 gallons tank capacity), flushed into the fresh water tank from an empty filter housing, circulated through all of the plumbing, and allowed to sit for hours before being rinsed out with fresh water.  First I had to dump the old, gnarly water.  It’s still considered fresh water, so it’s OK to dump it on the ground.  We are lucky in that our 125 gallon fresh water tank has a 1.5″ RV dump valve installed near the bottom that discharges through the floor of the bay and can be used to drain the tank relatively quickly.

We do not have any way to pour chlorine directly into the tank, so I have to shut off the water, relieve the pressure, unscrew the inline filter housing, remove the carbon filter, pour the pre-determined amount of chlorine into the housing, screw the housing back onto its base, and start filling the tank by opening the diverter valve and adding water to the tank.  I then have to use the house water pump to fill every inch of plumbing in the rig, and let the diluted chlorine solution sit for 3 to 4 hours and do its magic.  I know I have chlorine in all of the plumbing when I can smell it coming out of all of the faucets.

By 4:30 PM most of us had recovered sufficiently from our long, hot work day to gather at Kathy’s motorhome for our SKP social.  We were joined by Russell, a fellow SKP from Texas, as a SKP happy hour is always open to any SKPs who are around.  We’ve met one other SKP on our evening walks, but he did not attend.

We had a light dinner of Masala Lentil Pilaf.  By the time we were done it was 8 PM and still warm, so we skipped our evening walk.  The chlorine solution had been in the plumbing for about four hours so I dumped the fresh tank (again) and refilled it with good water from the campground through our sediment filter, water softener, and carbon filter, which I had re-installed in the inline housing.  The Shur-Flo pump was then used to flush all of the lines out with fresh water.

We finally took our showers and Linda headed off to bed while I replied to e-mails and worked on this blog post.

BTW:  The Shur-Flo 4048 water pump is working very well, providing better pressure and flow than we get from the campground connection.  Given that the pump is working well, it us our plan to start using the water from the tank to keep it from going bad and refill it as needed.  There is also the issue of having water pressure applied to the coach when we are not here.  Whether it’s the shore hose or the on-board pump, having the water system pressurized poses a risk of flooding and water damage if the system develops a leak.  In general, the system should not be pressurized unless it is being used and can be monitored.

 

2013_07_10 (Wed) It Takes Studs To Frame A House

It was all hammers on deck today.  Because the afternoon high temperature was forecast to be in the 90’s, most of us started work at 7:00 AM instead of 8:00 AM so we could be done by 2:00 PM.

Part of our Sheridan HFH RV CAV team taking a break.

Part of our Sheridan HFH RV CAV team taking a break.

We split up into smaller crews.  One of them covered the floor slab with Tyvek house wrap to protect it.  Several crews then laid out and assembled the 76 foot long east wall of the house while other crews cut, laid out, and assembled interior partition walls.

Brian, our local HFH construction supervisor.

Brian, our local HFH construction supervisor.

There’s another guy on our team named Bruce, who retired after 40 years as a builder, and I worked with him to lay sill seal and install metal foundation flashing.  The team delayed going to lunch in order to raise and secure the east wall, which was something to see, with all but two of us involved (and those two were taking pictures).

Raising the 76' long east wall.

Raising the 76′ long east wall.

After lunch we raised the rear wall and tied it to the east wall.  The exterior walls sit on wood sill plates, so they were anchored using 16 penny nails nailed the old-fashioned way (with hammers) like all of our framing so far.  By 2:00 PM we were ready to call it quits for the day, packed up, and returned to our rigs.

This is where the hats go during lunch.

This is where the hats go during lunch.

Most of our team decided a couple of days ago to attend the Sheridan Wyo Rodeo this evening, so we did not have our usual 4:30 social.  Linda and I did not attend the rodeo and had a quiet evening at home instead.  Linda did a load of laundry while I continued to edit and post blog entries and discover new things about WordPress, which is what we use to create our website and blog.

 

2013_07_09 (Tue) Let’s Get To “Work”

Today was the first day of our SKP team’s HFH RV Care-A-Vanner build–our reason for being in Sheridan–and our first day of our first HFH build ever!  We were all eager to get started and convened at the project on Works street at 7:45AM, along with Brian (construction supervisor) and Matt (executive director) from the local HFH affiliate.  “Circle” started promptly at 8:00 AM.  This is a HFH tradition and protocol that includes announcements, safety reviews, project discussion, assignments, and a short devotional (participation optional).

Studying the blueprints.

Studying the blueprints.

We have a crew of 18 that includes a number of people with building and HFH experience, so teams were quickly assembled and working.  The “Works” house is a 14 foot wide by 76 foot long “shotgun” house; one story on a very thick slab that includes a radiant heating system.  The slab was already poured and cured with various pipes sticking out of it, and the lumber to frame and sheet the house was piled neatly at the back of the lot.  Linda and I volunteered to work on grinding and polishing the slab, which will be the finished floor of the house once it is sealed.

Before we started working Nancy and Angel showed up.  Nancy is the local HFH office/ReStore manager.  Angel is the mother of two children, one with special needs, and they are the “partner family” for whom this house is being built.  It was touching to hear her talk about how much this house will mean to her family.  The property for the Works house was obtained from the local Catholic Church where Angel is a parishioner (I think).  It is located on Works Street.

A group of eight young AmeriCorps volunteers has been doing HFH work in Sheridan the last couple of weeks, including work at this site.  Today was their last day working on the Sheridan projects and they showed up around 9:00 AM to help and wrapped up just before lunch.

The building begins.

The building begins.

Linda and I worked all day grinding and polishing the concrete slab, with additional help towards the end.  Armin, an AmeriCorps volunteer from St. Croix, U. S. Virgin Islands, worked with us in the morning.  The rest of our crew split up into smaller teams and spent the day cutting wood and assembling walls.

Safety is foremost on a HFH build, and Steve frequently reminded us to be careful, take breaks, and stay hydrated.  Lunch was provided and included lasagna, salad, bread, and cookies along with lemonade, iced tea, and vitamin water (donated by Coca-Cola).  We had salad, and it was good.

By 3:00 PM it was getting warm and we were all getting tired, but it was a good tired, having been a productive day.  We cleaned up the site and returned to our rigs, which are only a mile from where we are working.

After cleaning ourselves up, we gathered at 4:30 PM for our traditional SKP social hour.  Everyone bought their own beverage of choice, and many brought snacks to share.  By 6:00 PM the beverages and snacks were gone and we all returned to our RVs for dinner.  By the time we finished eating it had cooled off outside, so we went for a walk as we do most evenings, weather permitting.

 

2013_07_07 (Sun) A Day Of Transition

Today was our last day at the CAM-PLEX in Gillette, Wyoming.  John & Cheryl pulled out at 6:15 AM, so we did not get to see them off.  We had a leisurely morning prepping the rig for travel, and pulled out of the Boxelder RV Park around 10:15.  Our destination was Peter D’s Campground in Sheridan, Wyoming, where would be joining nine other rigs (16 people) for a two week Habitat For Humanity RV Care-A-Vanner build coordinated through the HFH BOF of The Escapees RV Club.

The 103 mile drive was “high plains scenic”, and the first glimpse of the Bighorn Mountains was exciting.  The terrain was rolling and some of the grades were steep, albeit not steep enough to require special signage.  The last 30 miles of the trip one of the pyrometer gauges (Left) started exhibiting a new behavior.  On downhill grades, both pyros drop to the bottom of the gauge (300 deg F) as the engine is using very little fuel and getting lots of cooling.  As I started up the next grade, the “R” pyro would instantly start to rise as the engine burned more furl, but the “L” pyro would sit on 300 for 3 – 10 seconds and then jump up to and indicate a temperature close to the “R”.  (Note:  the left pyro has always indicated about 150 – 200 deg F less than the right one.)

We arrived at Peter D’s RV Park around 12:30 PM.  Peter D’s is easily accessed from I-90.  It is not a fancy place, but it is nice with clean restrooms/showers and laundry room.  The sites are a bit narrow, but they are all pull-through with full hookups and 20/30/50 amp power.  Out site was close to level and long enough for our bus and car.

I was a little concerned about the pyro readings, so I e-mailed my mobile mechanic and three fellow bus nuts, to see if they had any suggestions.

Before we left Gillette, Nick Russell gave us a bundle of latest issue of The Gypsy Journal to distribute during our travels, so we dropped off copies at the campground office.

Our HFH RV CAV / SKP HFH BOF team gathered at Jack & Shirley Krohn’s Airstream Sovereign trailer at 3:30 PM for the initial team orientation, led by Steven Gullette.  We were joined by Matt, the Executive Director of the Sheridan HFH affiliate, and Brian, the construction supervisor for our builds.  We learned that we would be working on two different houses, both within a mile of Peter D’s.  We had a late addition to the team, so we will have 11 rigs and 18 people.

Our HFH team assembled for dinner.

Our HFH RV CAV / SKP BOF team opening dinner.

We gathered at the Krohn’s again at 5:00 PM for the pot-luck welcome social.  Matt brought a grill and the meat and team members brought side dishes.  A bit to our surprise, there were several things we could eat (besides the dish we brought).  We were barely finished eating when a thunderstorm blew in and we had to gather up our stuff, head back to our rigs, and secure them against the coming storm.  At that point we hunkered down for the evening.

BTW:  The Rescue Tape holding the two halves of the roof-mounted searchlight worked just fine at highway speeds.