Tag Archives: Field Day chair (Paul KD8SNZ)

2015/06/26 (F) Field Day Setup

I was up at 7 AM and ready to leave for breakfast with the other SLAARC members who would be setting up our temporary field site for the ARRL Field Day event.  I called the SLAARC repeater and Steve (N8AR) came back and wanted to know if I had the site use permit from the township?  No, I did not.  Paul, N8BHT, got on the air and said he gave it to Linda so I went back home.  Linda was up but had no recollection of receiving it.  We looked through the materials she got from Paul but could not find it.  I left again for breakfast but after more radio QSO went back a second time to retrieve all of the records and bring them with me to the field day site.  (Our best guess is that he gave the permits to the other Linda (NF8C) who is the club secretary.

SLAARC's Field Day setup begins in earnest when Steve's equipment trailer arrives.

SLAARC’s Field Day setup begins in earnest when Steve’s equipment trailer arrives.

By this time it was too late to make it to breakfast so I stopped for coffee and fueled my car.  Mike (W8XH) also did not go to breakfast with the group in South Lyon so we were the first to arrive at the site.  Another 10 guys showed up shortly thereafter.  John’s Sanitation then arrived and dropped off our rented porta-potty.

We had 12 people for most of the day and 14 total who were there for at least part of the day.  It was a good group and just the right size for the task.  We worked steadily from 9 AM until almost 5 PM except for an early afternoon lunch break.  By the end of the day we had erected two towers and set up six antennas (20m beam and 6m beam co-located on the taller tower, two off-center fed dipoles from the taller tower, a 40m crossed dipole from the shorter tower, and a 40m 1/4 wave vertical with four elevated counterpoise wires).  We also put up three radio tents, a screen room, and the big food tent.

Larry (K8UT) holds the 6m beam while Steve (N8AR) and others attach the 20m beam to the mast of the taller tower.

Larry (K8UT) holds the 6m beam while Steve (N8AR) and others attach the 20m beam to the mast of the taller tower.

The weather was cloudy and dull and not the best for taking photographs but I took pictures anyway.  I had to be deliberate in my shot selections, however, as both of my memory cards were almost full.  All of the work that needed to be done today was finished by 4:30 PM and most of us took off.  Our Field Day chairman, Paul (KD8SNZ), and a new member, Ron, setup their tents as they would be spending the night and keeping an eye on the site.  Steve (N8AR) and Eric (K8ERS) stayed a bit longer to test the antennas using the mobile radio in Steve’s SUV.

Back home I took a nap for an hour before dinner.  Linda grilled Portobello mushrooms and corn on the cob and cut up some fresh strawberries and cantaloupe.  After dinner I went to my office and transferred all of our recent photographs from the Sony alpha 100 DSLR to my computer and then to our older NAS device which we had with us this past winter.  I then started backing up all of the photographs we had taken since December 2014 from the old NAS unit to the new one.  This involved a significant number of images, a lot of gigabytes of data, and took a bit of time.

Rather than sit around waiting for file transfers to finish I decided to turn on the Icom IC-7000 ham radio and see if I could figure out why I could not hear the Novi 440 repeater on Wednesday when we tested the antenna and coax installation.  I checked the Nifty guide for the Icom IC-7000 and, as Mike had suspected, I did not have the Tone Squelch frequency set correctly for the Novi repeater.  I changed the mode on the 440 MHz band from ‘Tone’ to ‘TSQL’ and then caIled Mike (W8XH) on the phone to see if he could help me do a radio check.  We spent about an hour going back and forth between the Novi and South Lyon repeaters.

With the correct settings I was able to work both repeaters although I had a lot of background noise (static).  I played with the noise reduction (NR) and pre-amplifier functions and both seemed to help.  Mike tried various combinations of power and simplex operation and we determined that the basic problem seemed to be a weak signal in both directions.  I am still suspicious of the fact that I do not have the Go Box grounded as I vaguely recall from three years ago having noise problems with this setup until I grounded the box, which is tied to the radio ground.

Field Day is an "all hands on deck (antenna)" event for our SLAARC group.

Field Day is an “all hands on deck (antenna)” event for our SLAARC group.

Mike was suspicious of the coax I used to go from the lightning arrestor to the radio but looked up the specifications on my Diamond X-50N antenna and suggested that an antenna with more gain might be in order.  We also discussed the location where I placed the antenna on the tower.  Although most of the antenna is above the tower it is on the northwest leg.  The two repeaters lie to the southeast so the tower may be ‘blocking’ some of the signal although that does not seem likely to me.  Of more concern to me is that I mounted the base of the antenna so that two of the three counterpoise (ground plane) rods are even with, and parallel to, two of the three topmost crossbars.  If anything is being blocked it is likely those as the crossbars are between the rods and the repeater locations.

Ed (KD8OSM) jumped in briefly to let us know that I also had a ‘hum’ that sounded like the 60 Hz power line frequency only higher pitched.  I have a small fan installed in the back of the Go Box so I hummed the same pitch as it was producing into the microphone and both Ed and Mike confirmed that this was the tone they were hearing.  The fan is audible, but not that loud, and was two feet behind the microphone so I would be surprised if it was picking up the fan noise.  It is possible that the fan is inducing the hum electrically, but I believe it is a DC fan, so that seems unlikely.  I do not have an AC line filter installed on the fan, or anywhere in the box, so that may be a next step.

The larger of the two towers is up and secured.  It has a 6m beam antenna on top of 20m beam antenna on a common mast with a rotator.  We also attached one end of an off-center-fed dipole to this tower.

At the SLAARC Field Day site atop the Lyon Township Atchison Memorial Park the larger of the two towers is up and secured. It has a 6m beam antenna on top of 20m beam antenna on a common mast with a rotator. We also attached one end of an off-center-fed dipole to this tower.  Tents are being erected to house the various operating stations.  The weather was overcast and forecast to get much worse before Field Day as over on Sunday.

Mike and I wrapped up our QSO and I shut the radio off.  I checked my e-mail and saw that the May 2015 issue of Bus Conversion Magazine was available.  I logged in to the website and downloaded both the standard and high definition versions of the April and May digital editions.  By the time I got to bed it was well after 11PM.  I finished up yesterday’s blog post draft and outlined as much of today’s post as I could before I lost the sequence and details of the day’s events.

 

2015/06/14 (N) WordPressing

We had yet more rain overnight.  I heard the rain around 6 AM and checked the Wundermap app on my iPad but did not get up.  Linda did not need to go to the Howell Farmers Market today as the refrigerator is quite full and the rainy weather made the prospect less appealing.  We finally got up at 9 AM and I made coffee.  Linda checked the weather forecast.  It called for a 100% chance of rain between noon and 3 PM with thunderstorms and up to 2″ of rain.  By 10:15 AM it was raining steadily again.

We deferred by one more day getting back to work on the bus.  The monthly meeting of our South Lyon Area Amateur Radio Club (SLAARC) was this evening and we did not want to get involved in physical work today.  I wanted to do a load of laundry but deferred that as the high humidity makes it harder to get the clothes dry.

I opened the three boxes that made up the OTA TV antenna shipment from AntennasDirect.com and laid all the parts out on the floor.  As I wrote yesterday I need to determine exactly what types/lengths/connectors I need to get everything hooked up and make sure I have it on hand before I climb the 40 foot tower next to the house.  After I laid all of the parts out this morning Linda asked how I was going to get all of that stuff up the tower.

Our new Antennas Direct DB8e Over-The-Air TV antenna.

Our new Antennas Direct DB8e Over-The-Air TV antenna.

My plan is to preassemble as much stuff as possible.  I will then take a 100 foot rope with me when I climb the tower, loop it over one of the crossbars, and drop it back down to the ground where Linda can tie it to a bracket, or directly to some part, and pull it up to me.  As I describe this it occurs to me that I should probably rig up a pulley.  We also figured out that we should run the TV co-ax inside the house before I climb the tower.  That will allow Linda to scan for signals and talk to me on our portable ham radios while I am on the tower if the antennas need to be aimed.  I called Mike (W8XH) to see if he would bring his climbing harness to our ham radio club meeting this evening and he agreed.

For breakfast I had some of the Pepperidge Farm cinnamon chocolate chip bread Linda bought and we both had fresh grapefruit.  After breakfast I got cleaned up and dressed and then partially assembled the OTA TV antenna.  I then went to my office and settled in at my desk to upload blog posts.  I had not been in my e-mail for a few days so there were some things I had to respond to before working on our blog.

I got my blog posts uploaded for May 29 through June 7 and then decided to update the other three WordPress websites I work on.  Much to my dismay I was not able to log in to the FMCA Freethinkers website.  I got an error message instead and the contents looked to me like the site might have been hacked.  I notified the President of the chapter and indicated that I would contact the ISP technical support folks and see what they can tell me.  I have never opened that site up to the members of the chapter because I never quite finished it but I intended to and I have a lot of time and effort invested in its development.  Still, if the site is totally corrupted I may just delete it and abandon the whole project.

I wrapped up my work just in time for dinner.  Linda reheated the two leftover vegan cheeseburgers and served them with the remaining vegan potato salad and fresh nectarines.

Linda spent a little time during the afternoon getting the treasurer’s report ready for our SLAARC meeting.  We left at 6 PM and were at the Witch’s Hat Depot in South Lyon by 6:30 PM.  We have changed the meeting format to have social time from 6:30 to 7:00 PM, followed by a business meeting, and then a program.  I got the climbing harness from Mike (W8XH) as soon as we arrived and put it in the car.  I then had a brief chat with Scotty (AC8IL) regarding Universal Towers in Clinton Township, Michigan and LMR-400 co-ax.  Scotty stocks LMR-400 but also stocks RG-213 which he thinks is better for outdoor use.  His opinion is based on a Motorola white paper that discusses potential problems with the aluminum foil wrapped copper braid outer conductor in LMR-400 in the presence of moisture.

Tonight’s business meeting was a discussion about preparations for the upcoming ARRL Field Day lead by this year’s club field day chair Paul (KD8SNZ).  The program was a presentation by Larry (K8UT) on the N1MM Logger+ contest logging program that we will be using to log contacts on four different networked computers.  Larry is a member of the N1MM development team.  I asked Larry if I could send him the URL for my broken WordPress website and he said he would look at it.  We left at 8:45 PM.

When we got home Juniper was hunched over something in the living room and I could see immediately that she had caught another mouse.  It was very small, like the last one, and for all I know it was the same mouse.  I got her to drop the last one and it escaped into my office.  Linda grabbed one of the antenna boxes and pulled out the shipping paper that was stuffed inside.  I managed to get Juniper to drop the mouse in the box, from which it was not going to be able to escape, and then took the box outside and set it free.  If it has any sense it won’t come back in the house and it will tell all if its little mouse friends to steer clear of this place.  Juniper is a very skilled hunter and will catch anything in that house that moves that is smaller than she is.

Linda prepared some fresh strawberries and served them with some non-dairy ice cream.  She logged in to Amazon.com and ordered six live traps and a new cover for my iPad, both eligible for Amazon Prime.  We then spent a little more time reading and writing and checking the weather.  The 10-day forecast is for continued rain almost every day.  We are still expecting the new roof shingles to be delivered tomorrow but we won’t be surprised if they are not.  We are also expecting that Apex will have to push the start date of our project back due to all of the recent rain delaying other jobs that are ahead of ours.  We turned in for the night at 10:30 PM; late for Linda and early for me.  She was asleep fairly quickly but I stayed up writing and played a few games on my iPad as I do most nights.