Tag Archives: Cub Cadet lawn tractor

2016/4/16-20 (S–W) From Ham to Home (Again)

2016/04/16 (S) A Local Hamfest

I heard Butch and Fonda get in their car a little before 6 AM this morning and leave for the quad-county hamfest at the fairgrounds between Peru and Mexico (in North Central Indiana, not Central America).  I got up quietly at 7:30 AM, got dressed, put my camera in the car, and walked over to Small Town Brew to say “good morning” to proprietor Lisa Paul and fill my coffee thermos before driving to the hamfest.  As I approached the coffee shop I sensed that something was amiss.  The lights were off and something about the appearance looked different.  A closer view revealed that the interior had been redone and the name Small Town Brew was nowhere to be seen.  “The Branded Bean” was written on the window instead, but regardless of the name it clearly was not open for business.  I walked back to my car and drove to the hamfest about 10 miles away, slightly disappointed at not starting my morning with a nice cup of coffee and a cheery chat with Lisa.

There were quite a few cars parked around the venue when I arrived.  I’m not sure why, but hamfests and swap meets always seem to begin at sunrise and end by early afternoon.  Perhaps it’s a certain residual military influence or because it just leaves the rest of the day open to go home and play with new found treasurers.  Whatever the reason, I paid my $5 admission, got my door prize ticket, found Butch to say “good morning,” and then got some coffee.  Fonda was already taking her Amateur Radio Operator General Class license examination and Butch was busy with potential buyers so I walked the aisles in search of ham radio or other treasurers I could not live without, but did not find any.

Hamfests and swap meets are mostly cash only affairs unless there are larger commercial vendors there, in which case they might take credit cards.  I do not carry much cash, which is a good way to make sure I don’t spend much money buying junk I don’t need.  I did find a placemat size laminated grid square map of the United States for $5 and a laminated letter size sheet with the U.S. Amateur Radio frequency allocations for $1 and bought those.  Butch liked them so I went back and got a set for him too.  I also found some relays mounted to substantial heat sinks.  The seller had four of them for $1 each so I bought one without any specific purpose in mind.  The heat sink alone was worth more than $1 and Butch bought two of them later.

I eventually sat down at Butch’s tables and chatted with him (when he wasn’t busy) while we waited for Fonda to emerge from the testing room.  When she did she had a big grin on her face and we knew she had passed the test.  She only missed one question out of 35, which was an excellent performance.  Butch immediately got their W5YI / Gordon West General Class Study Guide and CDs out of a storage tub and put them out for sale.

Although Fonda had not studied for the Amateur Extra Class license exam she decided to take it since there was no additional testing fee beyond the $15 she had already paid to take the General Class test.  I decided to stick around and keep Butch company (not that he needed me to do that) until Fonda finished the Extra exam.  She got 19 items correct out of 50, not enough to pass but not bad for not having prepared, and it gave her a sense of what the test is like.  She wants to get her Amateur Extra license before the end of June as a new question pool goes into effect on July 1, 2016, and is very different from the current item pool.

I spent a few minutes talking to a soldier from the Indiana Army National Guard about the Hum-V they brought to the event and then returned to our rig in Twelve Mile.  I told Linda that Fonda had earned her General Class license (which Linda already has) and that Fonda was determined to get her Amateur Extra Class license by the end of June.  Not that Linda typically responds to a challenge, but this seems to have rekindled her interest in doing the same.

I had not eaten breakfast so we had vegan hot dogs and fresh fruit for lunch around noon.  I worked on blog posts until 1:30 PM when Butch and Fonda returned from the hamfest and I helped them unload their truck.  We all sat around chatting for a while but we were all very tired and Butch/Fonda needed to eat, so we returned to our motorhome to take naps.

Butch and Fonda had not reappeared by 5 PM so Linda checked to see if they were up as we wanted to go see the progress on their “new” house in Metea.  They were up so that is what we did.  We were at the house for over an hour looking at the interior reconstruction and discussing the plans for what was still to be done.  The house will not be ready to occupy this year and their hope/plan is to have it ready in 2017 before they leave again for the winter.

The property was seriously distressed but they got it for a good price.  Besides the house, which they are gutting and rebuilding inside, there is a 40′ W x 48′ L building with a concrete floor and two 12′ W x 16′ H overhead doors.  They could not build a new building like that for what they paid for the entire property.   We know, because we have been trying to figure out how to put up a similar building on our property.  Still, they bought themselves a big project and it is going to take some time and money to make it habitable and useable, or saleable if that is what they choose to do.

Fortunately they are now “retired” and still have the place in Twelve Mile to live as well as the converted bus.  Indeed, they still have an enormous amount of work to do to get the Twelve Mile property ready to sell.  It is an unusual property, having started life as a GM dealership in the 1930’s and only closing in 1981.  It then housed an electrical harness manufacturing operation before Butch and Fonda acquired it more than 20 years ago.  They turned the old showroom area into living quarters, retained the two bay auto service area for that use, as it has a functioning in-ground lift, and repurposed the rest of the space as a parts room, machine shop, wood shop, and warehouse for their business.

All told they have about 12,000 square feet under roof on two acres in the center of town on a state highway within very short walking distance of a bank and Post Office.  All-in-all, it has served their business and personal needs quite well over the last two decades but is now much more building than they need having sold off much of their business inventory in 2014 and closed Service Motors as an active supplier of parts for Crosley automobiles.  It will make an excellent building for someone, but it is going to have to be a buyer with specific and appropriate needs.

By the time we left it was 7:30 PM so we drove to the Mi Camino Real Mexican restaurant in Logansport for dinner.  Linda and I split a taco salad (no meat or dairy) and an order of vegetarian fajitas (no dairy).  We sat a long time after we were done eating just chatting before returning to Twelve Mile.  It was 9:45 PM by the time we got back so we called it a night and went our separate ways.

Back in our rig I checked my e-mail.  I had several from Gary at BCM, one of which had the first draft of the June 2016 issue.  My article on servicing the Webasto DBW2010.75 Diesel Burner is in that issue and needed to be proofread and corrections noted.  I made a first pass at that, replied to a couple of e-mails, and went to bed.  It had been a long but satisfying day and tomorrow was the first morning since this past Tuesday that we did not have to set an alarm and/or get up early.

2016/04/17 (N) Parts Shuffle

Fonda goes to church on Sundays.  She typically leaves around 9 AM and gets home between noon and 1 PM.  Butch is often up very early but not necessarily ready to interact with the world except through his computer so I tend to not bother him first thing in the morning.  We had a leisurely morning sitting around in our sweats (pants and shirts), enjoying our coffee, and eventually having breakfast.

When I finally got dressed and was in the humor to work, I unloaded the old tag axle caliper, old-old brake pads (not the ones I burned up), and the old torque plate, along with the new left-hand caliper rebuild kit, and moved them into Butch’s machine shop.  I also moved the old/broken Shur-Flo 4048 12 VDC water pump to his shop as he wants to see if he can figure out what failed and why.  With all of that stuff out of the car I repacked it to try and evenly distribute the weight of the remaining cargo.

Late morning I texted Jarel Beatty in Logansport to let him know we were here and invite him to come out and see the cabinetry he built for us last year as it was finally installed in the bus.  He had a shooting competition at 1 PM at the gun club/range near Twelve Mile and said he would try to stop by afterwards.

I had finally located the 24VDC regulator yesterday and showed Butch where it was located on our bus at the outside rear corner of the storage bay over the DS drive axle.  It was a very convenient location except that Royale Coach installed the slide out storage tray tight against the cover, making it impossible to remove without first removing the tray, which did not look easy to do.  Butch suggested that I unplug the chassis battery maintenance chargers, connect the batteries, and leave some of the bay lights on to draw off the surface charge so we could get a more accurate reading of the battery voltage later.  He also wanted to draw down the battery voltage a bit so that the alternator would have some work to do after starting the engine.

We were discussing how to deal with the failure of the regulator or alternator on the road and Butch suggested that I could always maintain the chassis battery voltage with a battery charger powered from the onboard genset.  I mentioned that besides the sophisticated, but low current, maintenance chargers that I have installed the coach came with a 24V emergency charger hardwired to the chassis batteries and powered from a 120 VAC outlet in the electrical bay.  The instructions for that charger, however, clearly indicate that it is for short time emergency charging to get the engine started and not for continuous use.  It given its age it is clearly not an “intelligent” multi-stage charger and would boil the electrolyte if left connected for too long.  Butch suggested that I remove the emergency charger and replace it with a modern, high amperage one that could be used to run the batteries and not just top them up for starting.  That seemed like a good idea to me so I added it to my (mental) project list.

Butch has been redoing the solar battery charging system on their bus and had one solar panel still to install.  Since it was loose he had me photograph the mounting rails he devised and attached to the long edges of the panel flanges.  The photos were for a future BCM article.

Jarel showed up sometime after 3 PM.  We showed him how we had installed all of the cabinetry and woodworking he had done for us based on my design drawings.  He had been in the bus several times before to discuss the project, so he had a good idea of what we were trying to accomplish, but visualizing it was one thing and seeing it quite another.  He really enjoyed seeing how the project turned out and took some photos with his phone to show his wife.

Linda started preparing dinner around 4:30 PM.  Jarel stayed and chatted until 5 PM and then went into Butch and Fonda’s house to visit with them and their dogs, Rascal (a Jack Russell Terrier), and Daffy (some kind of wire-haired Terrier mix thing).

While Jarel was visiting I borrowed a set of jumper cables from Butch and some sandpaper.  I used the sandpaper to clean the two terminals in the passenger side engine bay that are used to jump start the engine.  I then attached the jumper cables in such a way that the free ends could not touch, or the positive lead short to the chassis, by clamping the ground lead to a rail in the bay and setting the positive lead on a piece of cardboard on the ground.  I then clamped my VOM leads in the two jumper cable clamps so we would not have to hold them.

After Jarel left we checked the voltage on the battery bank.  It was 24.95 VDC.  A fully charged lead-acid battery bank at rest would be 25.2 VDC, so the voltage was reasonable given that I had the maintenance chargers off and there were some small loads on the system.  Butch had me start the bus motor, let the oil pressure come up, and then shut it off.  He had me start it a second time and then shut it off, and then start it a third time and leave it running, switching it to high idle.  While I was doing all of that he was monitoring the voltage on the VOM.

The voltage was showing just over 28 VDC, which is what we expected from a properly adjusted, correctly operating voltage regulator.  The voltage rose slightly when I switched the engine to low idle, but the batteries were probably fully charged by then and the current draw was probably minimal.  In any event it did not rise above 28.5 VDC, nowhere near the 30 VDC that would trigger a “high battery voltage” warning light on the dashboard.  There was also no indication of the alternator/regulator not producing adequate voltage as the “low battery voltage” warning light (the same light, actually) is triggered by a voltage below +24 VDC.

While the engine was running I made a mental note of the position of the needles on the two analog battery voltage gauges in the dashboard.  The “24V” gauge was higher than the 28V mark by a full needle width, i.e., there was a needle width gap between the 28V position and the left edge of the needle.  The gauge is only marked every 4 volts so it looked to me like it was reading around +29V.  The “12V” gauge was sitting right on the 14V mark.  The “24V” gauge should read 28 VDC and the “12V” gauge should read exactly 1/2 of that if the Vanner equalizers are working correctly.

Our simple test did not preclude intermittent problems with the alternator and/or voltage regulator that might occur after they were warmed up, and/or vibrating with the engine rotation at full RPM, and/or bouncing down the road.  It also did not rule out problems with the Vanner battery monitoring system, which is what controls the warning lights on the dashboard.  We also did not check the voltage at the battery bank center tap to see how closely it matched the gauge on the dashboard or how closely it was tracking 1/2 of the overall voltage as a check on the operation of the two Vanner Battery Equalizers.  Still, it appeared that the alternator and regulator were functioning correctly.

Linda made black beans and rice for our dinner and Fonda made baked squash and pork chops for their meal.  We also had carrots, grapes, strawberries, and pickled vegetables, including okra, to share around the table.  After dinner we got out our lawn chairs and sat outside for a while, pretending we were “camping.”  The air temperature dropped as the sun set and we finally put the chairs away and went inside the house to continue visiting as we had no way to make a campfire in their driveway.

By 10 PM we were all tired.  I asked Butch if I could use his big auto shop air-compressor in the morning to adjust our tires and he said he would turn it on and put the hose out first thing.  We returned to our coach and were fairly quickly off to bed.

2016/04/18 (M) Twelve Mile To Turkeyville

I was awake at 6 AM and finally got up at 6:30.  I put on my sweats, fed the cats, and prepared our morning coffee.  I noticed that Butch had already put the air hose out where I could use it so I checked/adjusted all of the tire pressures while the coffee brewed.  I also turned on the TireTraker TT-400 receiver/monitor and plugged in the repeater in the PS rear closet of the bus.  The outside air temperature was in the low 50’s F and all of the tire pressures were slightly below the cold pressures I like to run so I adjusted them.

After all of the tires were adjusted, and the air hose and tools were put away, I went inside the bus and used the monitor to check all of the tire pressures/temperatures and make a chart showing the actual and indicated values for each tire.  All of the sensors indicated pressures higher than the ones I had just set, using a known good digital tire gauge, by 1.0 to 4.5 PSI.  While this was within the specified “precision” of +/- 4% for the sensors, it was not as accurate as I think it should be.

Linda was up by this time but waited for me to have coffee and cereal (homemade granola) for breakfast at 9 AM.  Today is a travel day for us, and we would not normally have coffee or breakfast on a travel day, but we were not planning on leaving until around noon for the 3-1/2 hour drive to the Camp Turkeyville RV Resort near Marshall, Michigan.  We will also pass the Michigan Welcome Center / Rest Area and stop for fuel at the M-60 exit, so we will have opportunities to use facilities if needed.

After thinking about it overnight I decided that it did not make any sense for us to take the three new/rebuilt brake calipers home to Michigan only to have to haul them back to Indiana in a few weeks to have our mobile mechanic, Joe Cannarozzi, install them.  I borrowed one of Butch and Fonda’s hand trucks and move them from the car to the machine shop one at a time.  I then repacked the back of the car, which was now 300 to 350 pounds lighter than when we arrived in Twelve Mile.

Sometime between 9 and 10 AM I called Camp Turkeyville to make a reservation for today.  Angela was not in the office but a woman took our name and request.  The park was far from full and the reservation not really necessary, but we wanted to make sure we got a full-hookup pull-through site.  We visited for a while with Butch and Fonda before making our final departure preparations.  By 11:30 AM we were ready for the final steps in the departure process.  Linda moved the car from in front of the bus and battened down the inside of the bus while I got the shorepower disconnected.  I started the motor, let the chassis air up, and pulled it straight across the street into the grain elevator driveway where Linda pulled the car up behind it.  With the car connected and prepared for towing I restarted the bus engine and we did our light check.  Butch and Fonda walked over for one last, quick conversation and then it was time to go.  They never chat with us while we are hooking up as they know it can create a dangerous distraction.

We knew the exact route we planned to follow but entered the destination into the Rand-McNally GPS anyway.  Ever since I did the update at Florida Grande Motor Coach Resort the unit has been very sluggish in its response to screen taps but appears to still work.

I looped around through the grain elevator driveway back to IN-16 and headed east out of town.  At US-31 we headed north.  The GPS unit kept trying to get me to head east on county roads but I stayed on US-31 all the way to US-20.  At US-20 we headed east and stayed with that route all the way to I-69 in spite of the GPS unit’s repeated attempts to get me to turn north and head up into Michigan, presumably to pick up US-12.  At I-69 we headed north and soon enough we were back in our home state, the first time since November 27th last year.

About 12 miles into Michigan we stopped at the Welcome Center / Rest Area briefly and then continued or trip.  We exited again at Tekonsha / M-60 (exit 36?) and stopped at the Travel America for fuel.  The pump would not accept our Chase VISA card and we assumed that Chase Bank, ever vigilant with regards to its use as we cross state borders, had rejected it.  It turned out that the truck pumps were only set up to accept corporate/fleet cards so Linda had to go inside anyway and used one of our other cards to pay for the fuel.  All of this caused a bit of a delay but I eventually put 50 gallons in the tank.  I did not fill it because I did not want to put in the additives at this fuel stop.  I wanted to do that at the Mobil Truck Stop near our house and top it up just before getting home.

On our way once again we exited I-69 at N Drive North and a half mile to the west pulled into the entrance to Camp Turkeyville.  It was just before 4 PM and Angela was in the office and expecting us.  The site she planned to put us on had a car parked in it, without the owner around, so she moved us to a different one a few sites down.  It was a difference without a distinction and was an easy in, easy out, relatively level pull-through full-hookup site, which was all we cared about.  I adjusted the level and then shut off the motor.  The only hookup we needed for the rest of the day and evening was electricity so I took care of that and shut off the chassis batteries and air supply for the engine accessories.

Since we would only be here for one night we did not set up the interior the way we would if we were sticking around for even a few days.  We were parked facing south and the afternoon sun was bright and warm so I put out the awnings on the passenger side of the coach.  Gary, a fellow camper from a few sites down, stopped to chat and compliment us on our motorcoach.  After we wrapped up our chat we went inside and had an easy dinner.

One of our routines (traditions, rituals?) is to walk an RV park when we arrive unless the weather is very disagreeable.  The weather was near perfect this afternoon, and it was still plenty light at 7 PM, so we walked over to the Cornwall’s Turkeyville building to see if it was still open.  The building houses a restaurant, ice cream parlor, and general store.  They were open until 8 PM so we meandered through the store but did not buy anything as neither of us brought our wallets.  We strolled back to the campground and walked the outer loop before returning to our coach.

We had access to quite a few OTA TV signals and tuned in one of the CBS affiliates with a strong signal.  We watched our usual Monday evening TV programs and turned in for the night without setting an alarm.

2016/04/19 (T) Home Again

With the overnight low outside air temperature forecast to be in the upper 40’s we left the bathroom roof vent and bedroom windows open as we knew the outside conditions would make for wonderful sleeping conditions inside the coach.  We were tired, and did not have to be up at any particular time, all of which made for good sleeping snuggled under a thin blanket.  I got up at 8 AM, tended to the cats’ needs, and made 7 cups of coffee.  A little after 9 AM we had toast and preserves for breakfast.  We don’t usually have breakfast and coffee on a travel day, but today was the final leg of our winter 2015-16 snowbird season, and the trip from Camp Turkeyville to our home was only 80 miles, with rest stop opportunities along the way if needed.

Checkout time at Camp Turkeyville RV Resort is noon and our target was to pull out between 11:30 AM and noon.  Part of the reason for stopping here for one night before going home was to empty our waste tanks.  Another reason was to give us a short, easy drive at a time of day that avoided the rush hour traffic at the beginning and end of the work day.  This was the third year in a row that we have done this and it works very well.

We started tending to our departure tasks around 10 AM and would have been ready to go by 11 AM except for a very nice, but very talkative, neighbor.  Still, we were on schedule and not in any particular hurry.  We pulled out of our site at 11:30 AM and made the long, slow trip around the outer road of the campground to get back to the exit.  Once we were on I-69 N I set the cruise control at 63 MPH and let the bus roll.  I-69 between I-94 and I-96 is a concrete road made of small, discrete slabs, and you feel every joint between them.  But hey, it’s Michigan; we expect the roads to be in bad shape and we like it that way (not).  Well, apparently the majority of our fellow citizens like it that way, OR at least prefer it to paying taxes and enforcing weight limits and speeds.  If that wasn’t the case, our elected officials would do something about it.

There was rain headed our way but it was not expected until tomorrow or later.  Still, the sky was overcast and we had not traveled very far up I-69 when we started getting a light, intermittent drizzle.  It stayed with us all the way to Lansing where we picked up I-96 E.  By the time we got to exit 122 (M-52), where we stopped at the Mobil Truck Stop for fuel, we had driven out from under the rain.

Since the bus would be sitting for at least a couple of weeks I added Stanadyne Performance and Lubricity Formulas, and Racor Biocide before filling the tank.  It’s always better to have fresh diesel fuel but it is also good to store the bus with a full tank to prevent condensation from moist air in the tank.  My solution has been to use the Biocide and store the bus with a full tank.  If it is going to sit for any length of time I run the Parker Fuel Polishing Module to slowly filter it and remove residual moisture.

From the Mobil Truck Stop it was only 11 miles to exit 133 (M-59), another 10 miles to Hacker Road, and about 2-1/2 miles (on dirt roads) to our house.  This stretch of Hacker is scheduled for paving this year and we knew from the Livingston County Road Commission that work had already begun.  Indeed, the surveyors were working in the fall before we left for Florida.

The initial work this spring was the removal of trees along both sides of the road and as soon as we turned off of M-59 onto Hacker it was immediately obvious that this had occurred.  It was also obvious that the road had been very recently graded and that there had not been any rain since then.  We still took our time, keeping our speed to about 25 MPH, but it was one of the smoothest trips we have ever had in the bus along this stretch of Hacker.  To our delight, the grader had also obviously done our street recently and we noticed that a few of our neighbor’s had apparently trimmed or removed a lot of trees and bushes near the road.  Yeah!

As we got to the first of our three driveway entrances I stopped the coach and lifted the tag axle while Linda got out.  She always spots for clearance to obstructions and guides me into the final parking position.  There were a few larger tree limbs in the driveway so she picked those up before I pulled in.  Once I was positioned on the level parking pad area of the driveway I put the tag axle down.  The coach was close enough to level that I did not bother adjusting the suspension.  After letting it idle for a couple of minutes I shut off the motor and we started our arrival routine with one notable difference; Linda’s first task was to get the cats in their carriers, unlock the house, take them inside, and let them out of their carriers.  Coming home us a big deal for them, too.

I turned off the engine accessories air supply and the chassis batteries and connected the shorepower cord.  The circuit breaker for this electrical service is in the sub-panel in my office.  I turned on the wrong breaker the first time so it took a second trip to the basement of the house to get power to the coach.  We had no intention of unloading everything today but there were a few things we wanted to get into the house right away, such as wallets and keys.  At the top of my list was all of our computer, networking, and photography technology while Linda’s focus was on clothing and food.

Once we had our highest priority items moved into the house I texted the small circle of friends who we have been keeping in touch with about Linda’s illness and our bus problems to let them know we were home safe and sound with no further problems.  I then went to the garage, found our good battery charger, and connected it to the 12V starting battery in the Honda Civic Hybrid.  Brendan had told us a week or so ago that the battery was dead and when I connected the charger it would only accept about 2.5 Amps of current and quickly tapered off to less than one Amp.  That wasn’t much current for a depleted battery but I left it and went back into the house.

I checked a little while later and the charger had given up and displayed an “F01” error code.  I did not even bother looking it up as the car is a 2007 model and this was probably the original battery.  I decided to go ahead and get a new battery from O’Reilly’s in Howell, but first we had to unhook the Honda Element from the bus.  The car was filthy, having been towed at least 1,500 miles since it was last washed, but I stopped and got the new battery first and then went to the car wash just down the street on the same side of Grand River Avenue.  I then went to the Meijer’s supermarket at Grand River Avenue and Latson Road and picked up a few things.

Linda started preparing dinner at 5:30 PM and was just about to put the pizza in the oven when Butch called.  We chatted for about 15 minutes and he updated me on the removal of the radiator blowers and T-drive from their MCI MC-9 NJT bus.  This assembly is above the engine and almost the width of the bus but they were able to get it out using their forklift.  (It really is nice to have the right tools for the job.)  Butch noticed last weekend that a lot of the oil had leaked out of the T-drive and figured it needed new shaft seals, at a minimum, and might need new bearings.  With the assembly out of the bus Butch can conveniently do all of the needed work on a bench and repair/rebuild some other things while he is at it.

Our first dinner course was a nice salad with arugula and Italian kale.  The pizza was one of our favorites, an Amy’s Roasted Vegetables with Caramelized Onions.  By the time we were done eating it was almost time for our Tuesday evening CBS TV shows and I decided to replace the car battery tomorrow morning.  I did, however, move the NAS and my computer to my office and connect them to power and the Netgear switch.  To my great relief, the network interfaces on both devices still worked just fine.  Clearly, the Amped|Wireles SR20000G wired network ports had failed although I still do not know why and probably never will.

The 2015-16 TV season is coming to an end so the season finales are now airing and they are all cliffhangers, of course.  We went to bed at 11 PM, watched a rerun of Two and a Half Men, and a few minutes of The Late Show with Stephen Colbert before going to sleep.

2016/04/20 (W) Core Return

We love our bus, love being in the bus, and love the lifestyle the bus affords us.  But we are not true gypsies at heart, and we also love our house and property.  We like the anticipation of travel and the promise of new experiences, but we also like the comfort and stability of finally landing at home after a long voyage.

We slept in this morning and finally got up at 8 AM.  Some things are the same regardless of whether we are at home or in the bus, and morning coffee is one of them.  We were enjoying our morning brew when our son texted Linda to see if we were available to FaceTime.  Of course we were!  A short time later we were “face-to-face” with grand-daughter Madeline (and her parents).

Another constant is Linda’s homemade granola.  She managed to make enough of it, and/or we managed to limit our consumption of it sufficiently over the winter, that we still had some left for breakfast this morning.  We might have one or two more servings beyond today, but she will be shopping for ingredients and making a new batch very soon.  She will also be making sure we have the necessary ingredients on hand to make vegan pancakes and vegan cupcakes as we anticipate an overnight visit with Madeline in the very near future.

After breakfast we got dressed and got to work.  Linda called Alchin’s to restart our weekly trash pickup while I made a service appointment for the Honda Element.  We checked our home phone messages.  Only a handful of the 42 messages contained any actionable information.  I made note of those details and then deleted all of them.  I called Catamaran Home Delivery and ordered refills for two prescriptions.  I then called Keith at Kish Lawn Care to see when he was planning on starting our mowing this season.  Keith’s wife just had major surgery, and the grass has not grown much yet this spring, so the first cutting is probably still a couple of weeks away.

With our calls taken care of we turned our attention to replacing the 12V battery in Linda’s Honda Civic Hybrid.  The nuts on the two threaded hold down rods were badly rusted and did not want to come loose so I sprayed them with WD-40 and let them sit for a while.  I eventually got the nuts broken loose and backed off enough to remove the rods, but bent the retaining brackets in the process.  I put the rods in my bench vise, and finished removing the nuts.  We removed the old battery, transferred the anti-corrosion pads to the new battery, set it in place, and reinstalled the protective plastic 2-piece cover.  We connected the vehicle cables and then connected the good battery charger to it to bring it to full charge before trying to start the car.

Back in the house Linda unloaded containers of water from the house refrigerator and then wiped it out.  She then unloaded a few more things from the bus, including clothes and food.  I texted Jim and Kristine Gullen to let them know we were back and then started researching small tractors and mobile Wi-Fi devices.  Linda was getting ready to order an Instant Pot and a couple of 12VDC power adapters for our Rand-McNally GPS unit through Amazon and I suggested she look for the Burton portable induction cooker that we saw at Butch and Fonda’s place.  The Suntunpen unit we have now works fine but the Burton unit has two advantages over it; a completely flat/smooth top and higher maximum power setting.  She found it, added it to the cart, and placed the order.

Linda heated a can of Amy’s vegetable soup and we split it for lunch.  I checked the battery charger and it said the battery was full so I put the old battery on the back seat floor and had Linda start the car.  It started on the second try and she backed it out of the garage so I could get in.  The hybrid battery was depleted and there was a red battery symbol illuminated on the instrument panel that we had never seen before so we got the Owner’s Manual out and looked it up.  It either meant that the 12V battery was not charging or that the hybrid battery was drained below some threshold, or possibly both.  We could see the charge level coming up on the hybrid battery so we waited and the battery warning light eventually turned off.  Linda also noticed that the in-dash navigation system, having completely lost power, was requesting a security code to reactivity it.  I found the code on a sticker inside the glove box and after Linda entered it the system returned to normal operation.  When the hybrid battery charge indicator was above 50% she backed out of the driveway and we went on our errand run.

I was on Golf Club Road last night when I went to O’Reilly’s to get the new battery so I knew it was in rougher shape than usual.  We took Hacker Road south instead which kept us on pavement.  We headed back west on Grand River Avenue to O’Reilly’s to return the old battery and get the core charge refund.  We then drove back east a short way to the drive-through car wash.  Linda had not used it before and was unclear about its location.  With the car all cleaned off we headed west again to Teeko’s Coffee and Tea to order some fresh roasted coffee beans.  Jeff was there and roasted the beans while waited and enjoyed a cup of Sumatra Manhelding coffee.  We got our usual Ethiopian Yirgacheffe half-caffe blend and decided to try a Costa Rican Terrazzu half-caffe blend.

We took the long way home, going back east on Grand River Avenue and then north on Hacker.  The extra driving around gave the hybrid battery plenty of time to recharge and cycle up and down and kept our just-cleaned car mostly on paved roads.

Back at the house I backed my car up to the large garage door and unloaded everything inside in preparation for my 10 AM service appointment tomorrow at Brighton Honda.  While I did that Linda unloaded a few more things from the bus.  We had quite a few rocks on the concrete driveway, as a result of Kerry Fear plowing snow this past winter, so I swept them off with a push broom.  We also had 6″ high ‘curbs’ at our three driveway entrances as a result of recent road grading, so I graded them out using a metal toothed rake.

By the time we finished those tasks we were ready to be done with physical work for the day.  Linda decided to spend an hour or so studying the item pool for the ham radio Amateur Extra class license exam.  I gathered up the laundry, took it to the laundry room, sorted it, and started a load.  I then joined her on the back deck to work on blog posts for a while.  By 4:30 PM it was a little chilly and we went inside.  I took up my usual spot on one of the living room sofas and almost immediately Juniper (our female cat) was in my lap.

For dinner Linda made a nice salad with arugula, Italian kale, strawberries, and slivered almonds.  The main course was pan-seared tofu with caramelized onions and barbecue sauce, served with a side of corn kernels.  Yum.  After dinner Linda wanted to go for a walk so we patrolled our street from one end to the other, which took about an hour.

Wednesday night is usually PBS night for TV but neither of us were in a TV watching mood.  I went to my office for a while, checked in to RVillage, and changed our location.  I then went to the WiFi Ranger website, downloaded some manuals, and opened a support ticket.  Back upstairs I texted Joe Cannarozzi, our mobile mechanic, to arrange a time to call him and discuss brake work.  I then called Mike (W8XH) to catch up on ham radio and SLAARC stuff and check on borrowing his trailer to transport our non-functional Cub Cadet Lawn tractor to Sloan’s for repair.  By the time I wrapped up my conversation with Mike, Linda had gone to bed and was watching a program on PBS about a previous live broadcast from the Monterey Bay Marine Sanctuary called The Best of Big Blue Live.  Linda fell asleep but I stayed up long enough to watch a rerun of Two and a Half Men and the first half hour of The Late Show with Stephen Colbert while working on this post.  With the stroke of midnight came sleep.

 

2015/11/25 (W) T Minus 2 Days

We both got up at 7:45 AM.  My back felt OK when I went to sleep last night but it was not good by morning.  I don’t know if that is a result of being immobile and supine or just the Ibuprofen wearing off.  As painful as it is to get up it feels better once I do.  We both got dressed to work.  Linda prepared raisin toast and tea for breakfast while I positioned myself on the heater pad.  Linda was busy by a little after 9 AM and I was up and about by 9:30.

The first thing Linda did was take out the trash.  She called yesterday and stopped our pickups starting next week.  It took me an hour to finish organizing tools and supplies in the garage.  At that point I turned off the garage furnace and opened the overhead doors.  I started my car and turned it around with the back end facing the garage.  We moved all of the things that were going in the bus outside the larger door.  We then loaded a lot of the stuff into the car.  This is not a permanent arrangement but was merely for the convenience of getting packed for traveling.

I helped get the recycling tubs into Linda’s car.  Late morning she took them to the recycling center and stopped at two different banks to make club deposits.  I took care of some computer-based tasks while she was gone.  I finally got a reply from DataViz regarding a sync problem with Passwords Plus and sent the tech support person (Colin) a copy of the sync log from my computer.  I also managed to register the Sony flash and accessories I bought a month ago.  When Linda got back she made grilled cheese sandwiches for lunch and served them with fresh apple slices.  The cheese was Tomato Cayenne from Field Roast and it made for a tasty sandwich on rye bread from Metropolitan Baking Company.  I had a couple of Ibuprofen for dessert.

We disassembled the temporary work table in the garage and stored the sawhorses out of the way.  We shook out the floor mats (as best we could) and Linda used the ShopVac to vacuum the floor of the larger bay.  We finally had enough room to store her Honda Civic inside for the winter.  That will be the first time it has been stored inside since she bought it in 2007.

[ Photo 1 of 1 – HC – The large bay of garage ready to accept our Honda Civic for the winter.  This is the first time we have been able to put a car in the garage since we moved in to this house. ]

The large bay of garage ready to accept our Honda Civic for the winter.  This is the first time we have been able to put a car in the garage since we moved in to this house.

The large bay of garage ready to accept our Honda Civic for the winter. This is the first time we have been able to put a car in the garage since we moved in to this house.

We rearranged some things in the front of the smaller garage bay to make room for the large trash container, the wheelbarrow, several 10′ lengths of 1-1/4″ plastic conduit, 10 large paver blocks, and the mower deck for the Cub Cadet lawn tractor.  With those things stowed inside the concrete driveway was now free of objects that Kerry could have hit with his snowplow.

The tractor and 18 cubic foot trailer will remain in the yard alongside the driveway where we park the bus.  The tractor won’t start and we had no interest in pushing it uphill through snow.  We found our large plastic tarp the other day so we unrolled it, covered the tractor and trailer, folded the edges under, and weighed the edges down with landscape blocks.  Hopefully it will stay put through the winter.

With sunny skies and the temperature hovering around 50 degrees F I opened the house electrical bay on the bus.  We loaded the four toolboxes onto a hand truck, two at a time, and rolled them over to the bay where Linda got them stacked and pushed in.  We then loaded the two drill cases in front of the toolboxes and I closed up the bay.

Next we opened the passenger side engine bay door and replaced the main engine air filter.  It did not look that dirty but the new one was obviously very clean by comparison.  This air filter is a bit pricey at $130 plus tax but it is so critical to good engine performance that it does not make sense to try and save a few cents by not replacing it or trying to clean a used one and reuse it.

With the air filter changed we then pulled out the chassis battery tray.  It holds four Group 31 lead acid batteries and is very heavy.  It has a very heavy duty slide out tray but the tray is worn and lets the leading edge drop a little bit as it comes out.  That means we had to lift it as well as push it to get it back in.

We applied a 14″ strip of black Gorilla Tape to the horizontal frame member at the top of the compartment opening to prevent metal tools from coming in contact with the chassis, which is tied to the battery ground.  I got this idea from Chuck when I saw that he had done this to their coach.  There was some fine rust on top of the batteries but the connections were all tight and did not show signs of corrosion.  I should probably have cleaned them anyway but we had too much else to do.  I did notice, however, that one of the batteries was from 2009 and the other three were from 2010 so they may be due to replaced.

I opened the doors on both sides of the front bus bay and climbed in.  Linda carried stuff over from the driveway and the living room (of the house) and I figured out how to fit them into the space.  We have less stuff in the front bay then the last two winters but more stuff in the car.  The problem for the bay is that we have things in open topped cardboard boxes so I could not stack things the way I have in the past.

We were done with this phase of the loading process by 3 PM.  I had turned on the main engine block heater and the Aqua-Hot engine preheat loop at 1 PM.  I started the main engine to air up the suspension, leveled the coach, and then turned on the auxiliary air compressor to maintain it at level.  I was getting ready to pull my car around behind the bus so we could hook it up when I realized I should probably move the bus a little bit first to make sure the brakes were not locked up.  I backed it up a few feet and turn pulled it forward a little farther than where it started.  Linda checked the floor and it was level so I switched the suspension back to Level Low to help minimize leaks and hold the pressure.

I continued to let the bus run on high idle while we hooked up the car.  With all of the connections made I opened the air valve that supplies air to the auxiliary braking system in the car and went to the cockpit to activate the various lights while Linda checked them.  Everything checked out as OK.

With the bus still idling we carried the HP Color LaserJet network printer from my office in the basement upstairs and into the bus.  It was heavy and awkward but we got in into the bus.  I had to remove the center cover from between the desk pedestals and we had to get it into its alcove in the left pedestal from the knee space between the pedestals.  I was pleased, however, that it fit very comfortably in that space as the space was designed to hold this particular printer.

Once the printer was in we found the replacement black toner cartridge and put it on board.  Linda also carried the smaller APC UPS up from the rec room to the bus and I put it on the connector cover shelf.  I think there will also be room on the shelf for one of the NAS units.  The newer one is physically smaller but has more storage capacity and is faster but my plan us to take the larger/older/slower one.

We were done with this phase of the loading process at 4 PM.  Our next task was to replace the screen insert from the front door of the house with the storm door insert.  Linda turned her attention to preparing food for our family gathering tomorrow and I stripped the bed, took all of the laundry to the laundry room, and started a load of whites.

My back was making me aware that I had worked it harder today than it would have liked so I took a few more Ibuprofen and settled in on the sofa with the heater pad.  Juniper found my lap almost immediately and stayed there until just before 6:30 PM when I had to get up for dinner.

Linda heated up a couple of Amy’s curry and rice frozen dinners and served them with the remaining kale/almond/raisin salad.  After dinner Linda started packing non-refrigerated food items in paper grocery bags for moving to the bus.  I brought all of my photography equipment upstairs to repack but left that for later.  I went downstairs and pulled two additional sets of BCM issues plus extra copies of some of the issues in which I have had articles.  I boxed the sets, labeled them, and brought them upstairs.

By the time I replied to a few e-mails it was after 9 PM.  We could have worked until midnight but we had both had enough for the day.  I settled in on the living room sofa with the heater pad on my back.  In spite of wearing a knee brace Linda’s right knee was bothering her all day so she took some Ibuprofen and we both went to bed.  We watched Weather Nation for a while and then went to sleep.

Tomorrow will be a long day but of a different sort.  In the morning we will finish loading the bus and I will check/adjust the pressures in all of the bus and car tires.  We are due at our daughter’s house at noon for Thanksgiving dinner and will probably stay until 7 PM. That evening, after we get home, we will winterize the plumbing in the house and spend the night on the bus in final preparation for our departure for Florida the following morning.

 

2015/11/06 (F) MEF3

Rain was forecast for overnight with the highest probability between 4 and 7 AM.  I think we had some light rain starting a little after midnight but around 6:45 AM a front moved through with intense thunderstorms.  The heavy rain lasted at most 15 minutes, but while it was coming down I could not see past the railing on our deck.  The winds were also very intense judging by the sound and movement of the Crimson King Maple Tree next to the deck.

When we finally got up Linda checked the weather.  The storm front had already pushed into Ontario, Canada and it looked like we were done with the rain.  Temperatures will drop during the day and we have some below freezing lows coming up the next few nights, but it’s November so we can’t claim to be surprised and have no basis to complain.

Linda left around 9:45 AM to go to the supermarket.  While she was gone I worked on my iPad finishing my posts from Wednesday and yesterday.  I made a few phone calls and sent several e-mails before getting to work on the bus.

One call was to SLOAN’s in Linden to see about having the lawn tractor repaired.  The service tech said the normal turnaround this time of year is about two weeks depending what is needed and whether they have the parts on hand.  He said that if I brought it in soon and they did not get it finished before Thanksgiving they would store it for us until spring.  Given the limited space in our garage and the need to get Linda’s car in there for the winter having them store it would be a real bonus but would require the better part of day to borrow Mike’s trailer, haul the lawn tractor up there, and return the trailer to Mike.

The second call was to A-1 Upholstery in Elkhart, Indiana.  Terry said the fabric was sewn for our spacer cushion and she was expecting the foam today or Monday.  Once the foam was stuffed into the fabric she would have to stitch the seam closed.  She figured it should be ready by Wednesday.

My last call was to Pat Lintner from our FMCA Great Lakes Converted Coaches (GLCC) chapter.  He and Vickie live just outside of Elkhart, Indiana and found several pieces for an old Nutone kitchen counter mounted multi-function appliance.  We have a Nutone power base in our bus that works and got a few accessories from Pat and Vickie at the GLCC Surplus and Salvage Rally back in September.  They subsequently found more, and were going to bring them to Florida, but I let them know I would very likely be passing through Elkhart late next week and could pick them up.  Pat offered me the use of the guest room, as he always does, and I may take him up on it this time.  Given the number of places I have to stop it will likely be a very long day.

One of my e-mails was to our cabinet maker, Jarel Beatty, to update him on when I might be coming to Logansport and to see if he could/would get a 60″x60″ sheet of Baltic Birch plywood and cut it into four 30″x 30″ pieces for me.  I then e-mailed Bill Tharpe to let him know I would be in his part of Indiana late next week and would drop off the antique SUN Distributor Tester at his place in Mexico, Indiana.

Bus floor under the driver’s seat.  Black tray to rear (upper left) has been sprayed with rubber undercoating.  Seat mounting rails (center) are visible.  Open area is the bay below the driver’s seat.

Bus floor under the driver’s seat. Black tray to rear (upper left) has been sprayed with rubber undercoating. Seat mounting rails (center) are visible. Open area is the bay below the driver’s seat.

Linda got back around 11 AM and we finally got to work on bus-related projects at 11:15.  The POR-15 and black spray-on rubberized undercoating paint seemed to have dried adequately overnight but the wood I treated with Thompson’s Water Seal was still tacky.  The directions said it took 48 hours to dry but we don’t have that kind of time to wait.

We removed all of the painter’s plastic and painter’s tape from the cockpit of the bus and put it in a trash bag.  I then drilled a 1/4″ drain hole in the bottom of each tray area where water had accumulated.  The one under the passenger seat opened into a dark space but I was fairly certain it was outside the body behind the plastic wheel well trim.  I could see the driveway gravel through the driver side hole so I knew it was outside the body.

The next task was putting spray foam insulation in a few critical spots.  We did not need much for the bus so I sealed two holes in the floor of the bedroom in our house (under a couple of the baseboard radiators) and then added some around the back door frame of the garage.  Once I start using a can of this spray foam insulation I find it best to use it up.

Cutting and fitting the new plywood to patch the area under the driver’s seat in the bus.

Cutting and fitting the new plywood to patch the area under the driver’s seat in the bus.

Patching the floor under the passenger seat involved three pieces of wood.  The tray area under the plywood floor between the seat mounting channels is slightly raised along the inside edges of the channels.  I had cut a piece of 3/16″ SurePly to fit between the raised edges and slide under the existing floor towards the center of the bus.  I set it in place and slid it under the old floor while Linda and I help it up slightly with pry bars.  Because of the geometry of the situation I had to cut about six inches off of the end of this piece towards the outside of the bus.  I had notched this piece to fit around the drain line for the front AC evaporator, so it slipped in behind the first piece just right.  The third part of the patch was a piece of recycled 3/4″ plywood that I had cut yesterday to just fit between the mounting channels.  With that in place I screwed through the old wood into SurePly and screwed through the 3/4″ plywood into the SurePly and pulled it up tight.

By this time it was 1:15 PM and I was ready for lunch.  Linda made hummus and onion sandwiches and served them with tangerine halves.  A simple but delicious mid-day meal.

After lunch we worked on the driver side floor patch.  The driver side was trickier because the patch has to rest on and span structural members.  As with the passenger side I am trying to replace 1″ thick plywood without having access to material of that thickness.  The plywood sold as 3/4″ actually measures from 0.707″ to 0.717 inches in thickness.  As it turned out the combination of so-called 3/4″ plywood with the SurePly underlayment plywood was just thick enough to match the old 1″ stuff.

Yet another layer of plywood to fill in and even up the floor under the driver’s seat in the bus.

Yet another layer of plywood to fill in and even up the floor under the driver’s seat in the bus.

I had to trim the piece of SurePly several times and drill holes for the seat mounting bolts.  The holes were not quite in the right place but I was able to trim it to my satisfaction and it was generally a good fit.  We then used it as a template for laying out the same shape on a piece of 3/4″ oak veneered plywood.

Hardwood veneered plywood is more expensive than regular fir plywood but it has more layers and is dimensionally more stable.  I had a piece that was flat and big enough to cut out the part we needed so I used it.  After some minor trimming it fit properly and lined up with the SurePly layer.  I turned them upside down, aligned them carefully, and screwed the SurePly to the underside of the 3/4″ piece.  I then installed them back into the open area.

We now needed another piece of SurePly, but it needed to be larger and a different shape.  It would be one of two pieces that would replace the 1/2″ thick top layer of plywood.  I removed the old piece from the bus after feeding two wires back through a hole.  We used the old piece as a template to outline the new piece and mark the four holes for the mounting bolts and the one for the wires.  I cut out the new piece and drilled the holes and then put it in place.  I was surprised by how much it was off.  It needed to be wider and longer and the holes were not as well aligned with the holes in the plywood below it as they needed to be.

All of the patch pieces in place in the driver’s compartment.  The four holes are for the mounting bolts for the seat pedestal base.

All of the patch pieces in place in the driver’s compartment. The four holes are for the mounting bolts for the seat pedestal base.

SurePly is not expensive but it’s not free either.  It is relatively easy to work with, however, so making a second piece was not a big deal.  What was a big deal was the cloud cover, dropping temperature, wind, and diminishing light, all of which were making outside work more difficult and less enjoyable with each passing minute.  But we took our time and got it cut, and after some minor trimming it fit very nicely.  I did not, however, secure it, or the 1″ plywood sandwich under it, as I needed the top piece to use as a template for the final piece.  This last piece will not only cover the area under the driver’s seat, it will extend out towards the door and cover the landing.  Once I have that cut correctly I will secure the bottom sandwich and then use floor leveling compound to fill in gaps.  I will then install the last two layers of SurePly.  At that point I will need to go to Lowe’s for another sheet of SurePly to finish the passenger seat platform and will probably get two sheets just to make sure I have enough.  As much as I like going to Lowe’s and The Home Depot, each trip takes time away from actually working on the bus.

We quit working at 4:30 PM to get the tools put away before Brendan and Madeline arrived.  They got here at 5:15 PM and she was very excited to see us and be at our house.  Linda and Brendan got all of Ms. M’s stuff from the car to the house and Brendan transferred the car seat to Linda’s car.  Brendan entertained Madeline while Linda got the inflatable toddler bed set up.  Madeline went immediately for the cabinet under the sink in the hall bathroom where we keep the bandages and found one to put on.  She likes cartoon character bandages.

Brendan hung around until 6 PM and left just as Linda put dinner on the table.  He and Shawna are headed to Ajo, Arizona this weekend for a wedding.  Their flight to Phoenix leaves tomorrow morning so Madeline will be with us until Monday afternoon when Linda takes her back to her house in Ann Arbor.  Her parents’ flight is due in at 7 PM so Linda won’t be home before 9 PM that evening.

For dinner Linda made roasted potatoes and mock chicken tenders.  She and Ms. M had broccoli and peas but she was kind enough to only serve me broccoli.  I don’t think I will ever develop a taste for green peas.

By the time we finished dinner Madeline was a little tired and had a brief crying episode when I told her she could not use our bed as a trampoline.  Linda offered to let her watch an episode of Daniel Stripped Tiger and that seemed to ease her distress at having been told ‘no’ which is a very traumatic experience for her at this age.  She wanted to put on her pajamas and brush her teeth first, so Linda helped her with that.  The two of them climbed into our bed and watched the video on Shawna’s iPad while I stayed in the living room and wrote this blog post.

When the video was over Madeline wished me ‘good night’ and went quietly off to bed.  Linda and I lingered in the living room and I texted Chuck to inquire about their travels yesterday and today.  I then went to my office for a while where I updated our WordPress site, off-loaded photos from today’s work, logged in to RVillage and checked the forums of various groups, and dealt with a few e-mails.  I came back upstairs at 9:45 PM and we were in bed by 10 PM where I finished the draft of this post.

 

2015/10/26 (M) More Tree Trimming

Linda was up early and off to the bakery.  I got up at 7:15, put on my robe, fed the cats, heated water for a cup of tea, and had a couple of vegan banana nut muffins.  I turned on the fireplace and worked on my iPad with Juniper curled up in my lap.  With Linda going to the bakery most days for the next few weeks this is how our days will start.

I have a lot of things to do, some of which require good weather.  Today looked to be just such a day so I wanted to take full advantage of it.  Keith called yesterday afternoon and we agreed that he would skip this week and mow the grass again on Monday, November 2nd.  That may be the final  cutting for this year and our hope is that most of the leaves will have fallen by then as Keith’s mower does a pretty good job of mulching them.

I left around 10 AM and went to the Tractor Supply Company store in Howell.  They sell Cub Cadet lawn tractors and someone recently suggested to me that they might carry parts specifically for CC machines.  They had a good selection of mower blades and drive belts but their fuel filters were generic and they did not sell starters, fuel pumps, or ignition coils.  I think the “Tractor Supply” name is a misnomer.  I bought a fuel filter but it turned out to be too big to fit in the clip that holds it on the side of the engine.

I got out one of our battery chargers, connected it to the battery on the lawn tractor, and let it sit for a while.  It has a 60A start boost setting and I tried using that to start the tractor.  It did not turn over fast enough but eventually gets a little fuel, putts, putts, putts for a few seconds, and stops.  There could be any number of things wrong such as any/all of: a gummed up carburetor, a bad fuel pump, or a bad starter motor.

My main focus today was trimming trees at the west end of the property.  Most (all) of them have branches that hang down low enough to bump your head when walking or knock you off a riding lawn mower if you are not paying attention.  Some of the branches were in Phil’s way the last time he was here and I said I would trim them before he returned as he will be placing and grading topsoil all through this area.  This will also make it possible for Keith to mow under these trees right up to the trunks, something he has not been able to do up to this point in time.

Except for a short break at 1 PM to have a quick lunch I worked until Linda texted me at 3:30 that she was leaving the bakery.  I was basically done at that point, finished picking up some small branches, and carried my tools back to the garage.  Linda got home at 4:30.  After catching up on our days she made a batch of granola.

I worked for a few minutes in the bus starting to loosen the last few pieces of old vinyl floor tile in the cockpit while Linda pulled dinner together.  We had the leftover dandelion greens risotto.  She used the rest of the greens in a sauté with onions, garlic hot pepper flakes, and a little EVOO.  We had an Asian Apple Pear for dessert; the first one of these either of us has ever had.  It was definitely a pear but a bit crisp, like an apple, and with some apple taste.  Monday night is TV night and we watched our usual shows before going to bed.

 

2015/10/19 (M) Flashless

Linda was up at 5:45 AM and out the door by 6:15.  I woke up but went back to sleep and finally got up at 7:30 and got dressed.  I turned on the furnace in the garage and turned up the thermostats in the bus and then had breakfast.  Rather than grind up a small quantity of coffee beans and get the coffee maker dirty I had a cup of tea.  I retrieved Butch’s e-mail and called Clyde in Canton to arrange pickup of the antique Sun distributor tester that Butch bought from him last night on Ebay.  I will drive down Friday to pick it up.

Phil showed up around 8:30 AM, unloaded his front loader, and got to work on the French drain.  I went out around 10 AM and talked to him briefly.  I then walked through the southwest corner of our property looking for a corner marker.  I did not find one but I did discover some REALLY big trees with REALLY BIG vines woven through them.  The base of the vines was as big as one of the trees, about 30″ in diameter.  I had never seen a vine root that size.

Back at the house I called John Palmer, of Palmer Energy Systems in Florida, to update him on my recent call to Magnum Energy technical support.  He said he would talk to Tom in the next couple of days and try to get me the connector (terminal block) I need.  We agreed I will call him back on Friday.

Next I called A-1 Upholstery in Elkhart, Indiana and talked to Terry.  I ordered a bolster cushion to fill in the space behind the sofa seat cushions and below the sofa back cushions.  It will be 6″ high x 4-3/4″ deep x 78″ long and will be one density of firm foam rather than a firm center layer with softer outer layers on top and bottom (like the seat cushions).  She will use a plain beige fabric as it will not be visible and so it does not have to match the other sofa cushions.  She said it would be ready in early November, which is plenty of time for us to drive down and get it.  The price was $125, which sounded like a fair price to me.

I got out my old Sunpak DX-8R ring flash and connected it to one of my Quantum high voltage battery packs but the battery pack appeared to be dead.  The two battery packs I have are almost unused but have apparently self-discharged and are now dead.  This also happened to my original battery packs.  The only flash equipment I have is set up to run off these packs but I am not inclined to replace them again as I do not use them enough to keep them charged which makes it hard to justify the cost as they are expensive.  Unfortunately that leaves me, for the moment, without any flash capability for the new Sony SLT-A99V DSLT camera.  Buggers.

I sent a TXT message to Joe to let him know that I did not see any indication of axle/hub seal leaks on the inside of the bus wheels.  I then called Bill in Mexico, Indiana and left him a message regarding the antique Sun distributor tester.  I will drive it at least as far as Elkhart, Indiana when I pick up the bolster from A-1 Upholstery and transfer it to Bill if he can meet me there.  There is also the possibility that I will drive it all the way to Bill’s place in Mexico, Indiana and stop by Jarel Beatty’s cabinetry shop in Logansport to have him cut down the connector on the passenger side HVAC duct cover.  If I do I will also pick up the drawings for the desk, sofa, and pull-out pantry as long as I am there.

Phil checks the grade of the new driveway extension.  The laser level is set up by the utility pole.

Phil checks the grade of the new driveway extension. The laser level is set up by the utility pole.

I went back outside and walked through the layout of the driveway extension with Phil.  He then set up his laser level, took elevation measurements at various points, and made an annotated sketch.  He needed to think about the data and figure out what we could actually do given the change in grade from the existing concrete driveway to the road at the third culvert and the need to flatten out before reaching the culvert to tie in with where the barn will (might) eventually go.

Keith, from Kish Lawn Care, showed up around 11 AM to mow the grass.  I got out our leaf blower and let Phil know that I would be occupied for a little while with yard work.  I blew the leaves off of the rear decks, out from under/around various bushes, and off of the two boulder retaining walls into the yard where Keith could mulch them with his riding lawn mower.

About the time I was done blowing leaves Phil had a plan to discuss.  The elevation drops 7-1/2 feet from the concrete driveway (that goes from the street to the garage) to the street at the third culvert some 200 feet away.  Phil thought that our best bet was to slope down from the driveway over a distance of 40 feet, level out for 40 feet, and then gently slope down for 70 feet to the area in front of the future barn location.  That would leave another 50 feet with a slight drop to get to the street.  Some of the area down there will be close to level, however, so another RV could park down there.

We also discussed running power and agreed that I would buy about 40 feet of plastic conduit to get under the level area and headed towards the southwest corner of the garage.  We would need the conduit first thing tomorrow morning so I decided I would go to Lowe’s this evening.

I finally got to work in the bus around 1:30 PM.  I positioned the sofa seat, secured the piano hinge to the stationary backboard with four screws and then drilled all of the other screw holes using my smallest VIX bit.  I installed all of the little screws, dialed back the thermostats, and closed up the bus.  My time-on-task was short but it was a big item to check off of my “list.”

The Sunpak DX-8R ring flash can operate on four AA batteries so I put a set in and connected it to the hot shoe on top of the camera.  The camera was able to trigger the flash (more than once) but the shots were seriously overexposed.  I did not take the time to try and figure out if the flash can be controlled by the camera based on light coming through the lens.  If not it won’t be usable in most situations.

It was a mild day with blue skies and white puffy clouds so I took the new camera outside to capture some images of the work Phil is doing.  I shot a few frames of the more colorful trees in our yard while I was at it.

Linda texted me at 3:40 PM to let me know she was leaving the bakery and stopping at the store on the way home.  Phil continued to find rock, concrete, and brick debris as he dug out the driveway extension.  He used the 30″ toothed bucket on his excavator to sift out the larger pieces and pull them into a pile and then used his front loader to put all of it into his dump truck.  I got a metal tine rake and raked out some of the smaller stuff, not because it needed to be removed but because I needed to do something physical and wanted to smooth it out to get a better idea of how it will look when finished.

Phil started securing his equipment at 5 PM and we were wrapping up our last discussion of the project for the day when Linda got home at 5:30.  After unloading a few groceries she started fixing dinner.  Phil took off and I continued raking for another half hour until dinner was ready.  Linda served the rest of the polenta with puttanesca sauce and steamed sliced parsnips.  I thought we finished the Cupcake Black Forest wine last night but I was pleasantly surprised to find out that we still had enough for our meal this evening.

After dinner I went to The Home Depot looking for a fuel filter for our Cub Cadet lawn tractor.  THD sells Cub Cadet equipment but only had generic fuel filters so I did not buy one.  I went to Lowe’s, where we get a 5% discount on everything we buy! and bought the following:  four 10-foot pieces of 2″ PVC non-conductive conduit, a 90 degree elbow, a coupler, two end caps, 1″ and 1-1/4″ self-drilling screws, an 8′ long pressure treated 4×4′, and a clamp on saw guide.  The saw guide was an impulse purchase but I had a $10 Off card for a total purchase of $50 of more.  We have struggled with makeshift saw guides all summer and fall and I still have more careful cutting to do.  I already have a saw guide but could not find it and should have bought a new one at the beginning of the bus remodeling project.

Phil called the house while I was out so I called him back.  He had figured out that extending the driveway to within 10 feet of the front of the proposed bus barn would add 25% to the cost of the project.  That was more than I was prepared to spend at this time so we will defer that work until we build the barn, probably in summer 2017.  We watched Scorpion and NCIS Los Angeles and then went to bed.

 

2015/09/30 (W) Annual Checkups

We were both scheduled for our physical exams today.  Mine was at 9:20 AM, and I needed to leave by 8:20 to be sure I was there on time, so I got up at 7:30, showered, and dressed.  I took my vitamin and allergy meds but did not make coffee or have breakfast, Linda’s appointment was at 1 PM so she slept in.  We both had our blood drawn a week ago and the lab results had already been reviewed by our doctor and made available to us via the Henry Ford Health System MyChart patient information system.

We are both basically in good health with only minor issues, such as arthritis in the base of my thumbs or worn out knee joints in Linda’s case.  Both of our blood analysis results were OK across the board but that does not mean we were completely happy with them.  My blood pressure was a little higher than I would like but the doctor thought it was fine.  Linda’s total cholesterol is higher than she would like so we are still learning what dietary choices and physical activity have to do with controlling that.  We respect our doctor’s judgement but we are also re-calibrating our own understanding of what is desirable for us versus what is “normal” for adults our age living in the USA.

The problem with “normality” is that it is a statistical concept.  In a population that is overwhelmingly unhealthy we do not necessarily want to be normal.  As an example, American medicine considers the normal range for total cholesterol to be 120 to 200 and yet research, as reported by Dr. Michael Greger at NutritionFacts.org, shows that real health is associated with a number less than 150.  Most Americans have total cholesterol way above that except for one group; active vegans.  As another example it is generally accepted that as people age blood pressures in the 130’s over 80’s are “normal” and yet in rural China and Africa, where people eat mostly whole-food plant-based diets, “normal” is 110 over 70 for their entire lives.  Heart disease and other “western” aliments are also virtually unknown.  We are still works in progress.

I do like my morning coffee even though it is usually half regular and half decaffeinated so I left my physical exam and headed for the Tim Horton’s at Beck and Grand River Avenue.  While I was in line I got a call from Chuck wanting to know if the new windshield cut down any of the wind noise.  He was headed to his shop just down the street so I suggested he stop and chat over a cup of coffee.  I told him what intersection I was at but mistakenly told him I was at Dunkin Donuts so he stopped there first.  We have air/water leaks around the other windshields, side windows, and the entrance door so I could not tell any difference from replacing just one windshield.  I trust, however, that the new one will not leak air or water and it is currently not cracked or dinged, so I am happy with it.

Linda texted me that she was leaving early for her appointment and was going to stroll around the mall.  When I got home and tried to lock the driver side door on my Honda Element the key stuck in the lock and would not turn or come out.  This lock has been failing for a while but the failure mode has been an inability to insert the key.  Fortunately I had a second key in the house and was able to unlock the passenger door and rear lift gate.  Not only was I unable to remove the key, the latch was disconnected from both the outside and inside handles and I could not get the door open.  I called Brighton Honda to make sure they could give a ride back to the house and then removed the ham radio control head and microphone, the GPS, the cellular booster, and the 2m/70cm antenna before driving to the dealership.

Rob checked me in and tried jiggling the key harder than I had.  The key still did not come out but he managed to get the latch to re-engage with the handles so we could get the door open.  He wrote up the work order and I only had to wait a short time for the shuttle to return and drive me home.  Rob called later in the afternoon with the estimate.  They had to order a new latch which should be in on Friday, and then send the latch and one of my keys to a locksmith to have the lock matched to the key.  By the time they got the mechanism back from the locksmith and installed in the door he figured it would be the middle of next week.  That was not ideal for me but it was what it was.  The car was not very usable in its current condition so I did not really have a choice.  I was all too well aware that this was another case where I put off fixing something longer than I should have.  I was lucky, in a sense, that it failed when and where it did as I was not stranded somewhere calling Linda to bring the spare key.

When I got back to the house I attached the battery charger to the battery in the lawn tractor.  Philip Jarrell is supposed to start working on our French drain and pull-through driveway extension tomorrow and the lawn tractor is parked where he will be working.  I added gasoline to the tank but even after bringing the battery to full charge and using the jump start feature on the charger I was unable to get it started.  After repeated attempts I gave up.  When Linda got home we disengaged the transmission and pushed to another part of the yard where it would be out of Phil’s way.

I have mentioned before that this lawn tractor was left here by the previous owners.  The mower deck was pretty messed up and we removed it this past spring.  We have a lawn service, Kish Lawn Care, mow the grass so we really do not have a reason to buy a new lawn tractor/mower.  Still, I thought it would be useful for hauling materials and debris around the property and I put new drive tires on it in 2013 and bought an 18 cubic foot dump trailer this year to pull around behind it.  Whatever the problem is I’m sure it can be fixed, and probably by me, if/when I have time; which I do not at the moment.

I spent much of the rest of the day in my office except for dinner.  I reviewed the final draft of an article I wrote which is running in the October 2015 issue of Bus Conversion Magazine.  I then logged in to the B&H Photo website and finally ordered the Sony alpha99 (a99v) DSLT body and a few accessories.  The body comes with the vertical grip battery pack for no extra charge, a $378 value, so that was a nice surprise.  The body comes with one battery but the grip, which holds two additional batteries, does not come with any, so I ordered five additional batteries giving me six total for two complete sets.  I also ordered two 64 GB memory cards and a small case for carrying an extra battery on my belt.  B&H is closed until October 7 for SUCCOS.  My order is scheduled to ship on the 8th and arrive on the 9th, no added shipping charge.

I spent the rest of my time editing drafts of blog posts and selecting/processing a few photos to go with some of them.  I hope to have the posts for the first two weeks of August uploaded in the next couple of days.  When I finally came upstairs we watched a show on PBS about the life long work of biologist E. O. Wilson.  It was fascinating.

 

2015/05/22 (F) Stuck Nut

Our day started, as it usually does, with coffee and breakfast.  When we finally got to work on our tasks for the day we started by putting various things in the house back where they belonged, many of them having been piled on beds or put in uncarpeted areas while Jack cleaned the carpets on Wednesday.  Linda settled in at her desk to deal with paperwork while I got out our Honda self-propelled lawn mower and finished cutting the grass around the house.  She then turned her attention to straightening up the house and cleaning the kitchen in anticipation of tomorrow’s dinner guests.

I puttered in the bus for a bit trying to figure out how the cabinet above the refrigerator was constructed and might, therefore, be deconstructed but did not solve that puzzle and turned my attention to our Cub Cadet 1000 Series (LT1040) lawn tractor.  The mower deck is badly out of adjustment, sitting very low on the right side even with the height adjustment lever in the highest position.  I wanted to remove it rather than try to adjust it so I could use the tractor to more easily tow the new utility cart around the yard.

I already had the PDF version of the manual on my iPad and studied the directions for removing the mower deck.  It appeared to be an easy procedure that could be done by one person but I had Linda help me.  Once it was out from under the tractor we cleaned it off as best we could.  It had what looked like many years of grass clippings packed into every nook and cranny.  One of the idler pulleys was broken, a wheel was loose and its bracket slightly bent, and the drive belt was in very bad shape.  If we ever want to use it again those things will have to be replaced and repaired.  The suspension mechanism on the tractor will also have to be adjusted.

The tractor is leaking something, either oil or hydraulic fluid, so now that the mower deck is out of the way I will try to identify the location of the leak.  The tractor came with the house when we bought it so it was “free” (in a sense).  It was not in the best of shape, so there is a limit to how much time, effort, and money we will put in to fixing it.  Besides, for now Keith mows the grass and we have the self-propelled Honda walk-behind mower for trimming up the yard, if needed, between major cuttings.

My next task was to get the trailer ball off of the back of the lawn tractor.  The ball had a 2-1/8″ hex base flange and the nut was 1-1/8″.  I did not have a 1-1/8″ socket or a 2-1/8″ open end wrench, so I went to Lowe’s in search of said items.  I found a deep 1-1/8″ impact socket with a 1/2″ drive but they did not have open end wrenches the size I needed so I bought a very large slip wrench.

The nut was initially coming off easily but then bound up.  Even with Linda’s help we could not turn it.  We own a torque wrench that is over 3′ long and will work up to ~800 lb-ft of torque, but it has a 3/4″ drive.  So we went back to Lowe’s to get a 1-1/8″, 3/4″ drive socket.  Fortunately they had one.  While we were there we also bought a 6 gallon pancake style Porter Cable air compressor and a new American Standard toilet seat for the upstairs hall bathroom.  The air compressor is smaller than the 15 gal Dewalt and may fit in the passenger side engine bay.  It has regulated output pressure to 150 PSI so it should be sufficient for inflating the front bus tires.  The toilet seat was the right shape but the wrong color, so it will get returned.

The torque wrench gave us enough leverage to move the nut a bit more but then it bound up again.  I suspect the threads are mangled.  We sprayed some WD-40 on it but it did not help.  I called Butch to see what suggestions he might have.  Heating it might help but I do not have anything that would get it hot enough fast enough.  Plus, the ball/nut are just below and behind the plastic gas tank; not a good place for intense heat.  Butch has an induction heater that would be ideal for this situation, but it is five hours away in north central Indiana.  I asked about a nut splitter but Butch said he has not had much luck with those.  He suggested a large pipe wrench.  They are self-tightening (when used correctly) and could grip the ball directly if needed.  I do not plan to reuse the ball so I do not care if it gets mangled, I just want it off the tractor.  If all else fails Butch said I can cut off the bolt with my Sawzall reciprocating saw.

I had planned to work on computer-based tasks today but was not in the humor by the time I was done working on physical tasks.  Linda made fajitas with sautéed onions and bell peppers, vegan gyro “meat”, and vegan sour cream.  Yum; that’s a keeper.

2015/05/18 (M) Ceramic Floor Tile

I plugged my laptop in, started it, put a load of laundry in the washer, and then made our morning coffee.  We are finally running out of the six pounds of beans we had shipped to us in Quartzsite, Arizona at the end of February and will need to get more from Teeko’s sometime soon.  While we were enjoying our morning coffee I pulled up some information online on how to remove ceramic floor tiles.  What I found was a bit discouraging but what was clear was the need for certain equipment and safety precautions.  Linda needed to return the Sherlock DVDs to the Howell Library today so we went on an errand run to Howell.

At the Library we did some more vehicle research in the April 2015 Consumer Reports.  The Chevy Colorado / GMC Canyon mid-size pickup truck was Motor Trend Magazine’s 2015 Truck of the Year, but being a new model CR had no data on predicted repairs or user satisfaction.  Ditto for the 2015 Ford F-150 and its 700 pound lighter aluminum body.  We liked the size of the Nissan Frontier but the manual transmission required for four-flat towing behind our bus will keep us from buying one.  We have not looked at the Colorado/Canyon yet but it is similar in size to the Nissan Frontier.  CR gave good marks to most of the Subaru models and the Forrester was one of their top picks.  Years ago we wanted a Subaru Outback but they were always just slightly too expensive.  Compared to the vehicles we have been looking at recently, the Subaru’s are less expensive.  Right now, however, we are focused on the utility of a 4-door pickup truck.  Yeehaa!

We checked out the DVDs for Season 1 of the British detective series A Touch of Frost. It is not a BBC production so we will see how we like it.  We stopped at D-R Electric Appliance Sales and Service just up the street to look at refrigerators.  We bought our new gas range/stove from them last September.  They had a 16 cubic foot top-freezer GE (GTE16GTHxx) whose dimensions looked like they might work.  With the doors removed it was under 26″ deep so it would fit through the door of the bus sideways.  It is available in white, black, and stainless steel.  Kurt Richards helped us and said he would search the units he can order if I give him the dimensions of our enclosure.  D-R Electric Appliance is not a dealer for Fisher and Paykel so we would have to get one of those through Lowe’s if we decide to go that route.

Lowe’s was our next stop.  Linda looked at plants but decided not to buy any on this trip.  We picked up a couple of 40 W appliance bulbs for the microwave as one of the two bulbs that lights the top of the range burned out the other day.  I picked up a new face shield, dust masks, a Tyvek jump suit, a floor chisel with shield, and a 3-pound short-handle sledge hammer.

Teeko’s Coffee and Tea is kitty corner from the Lowe’s/Walmart shopping center so we stopped there and ordered one pound each of our three half-caffe blends: Sweet Seattle Dreams (Seattle Blend + Sweet Dreams decaf blend); Ethiopian Yirgacheffe, and Cafe Europe.  Jeff wasn’t there but his mom (Mary) took our order and his dad (John) was starting to put together the roast when we left.  I will pick the beans up tomorrow afternoon.

By the time we got back to the house it was time for lunch so Linda fixed grilled “cheese” sandwiches.  She is still using up the non-dairy cheddar cheese we bought a while back.  It is not Daiya brand and it does not taste like cheddar.  Actually it doesn’t taste like much of anything.  Keith was there mowing the yard as we thought he might be.

Me in the Tyvek jumpsuit removing the black ceramic floor tiles.  (Photo by Linda.)

Me in the Tyvek jumpsuit removing the black ceramic floor tiles. (Photo by Linda.)

[p1 L] It was once again 1 PM by the time I got to work in the bus removing the black ceramic floor tiles.  I suited up and Linda took a couple of photos.  I was over dressed under the Tyvek jumpsuit so I changed into something cooler.  Even then it was a hot, sweaty afternoon.  Houses get wrapped in Tyvek to prevent air movement between the interior and exterior, so a jumpsuit does not really breathe.  Neither did I with the dust mask in place so I settled for my wrap-around safety glasses, full face shield, Tyvek jumpsuit, and leather gloves.

I had hoped to get most of the floor tiles out intact.  They are nice 12″x12″ black ceramic with a hint of silver flake in them and they were probably expensive when they were installed in the bus in 1990-91.  They were installed just the way they would be in a house, on a troweled bed of thin set mortar, with one difference; they were set directly on the factory original plywood subfloor of the bus rather than on an underpayment layer.  The information I found online this morning indicated that removing tiles installed this way might require removal and replacement of the subfloor.  That is not an option in the bus so I was curious, and a bit nervous, to see how they would come out.  The other caution was to NOT smash them with a sledge hammer to break them into smaller pieces for easier removal, even though there are lots of websites that tell you to do this.  Ceramic tiles with a high quartz content will shatter sending tiny razor sharp shards flying in every direction; thus the Tyvek jumpsuit, face shield, and gloves.

I took a few tiles out yesterday and most of them came out intact.  The first few today, however, came out in two or more pieces.  Either way I was committed to removing them, so I kept at it.  I developed a technique that seemed to work more often than not.  I would chisel along one free edge and when I got the first indication that the tile was loosening I would switch to an adjacent free edge (if there was on).  Proceeding in this manner I was able to work my way down a row getting most of the tiles loose in one piece.  The tiles were laid in rows with aligned joints running across the coach and staggered joints running the length of the coach.  Thus the rows were short and easier to work on, my work was interrupted by something I will describe next, but I returned to the task and removed the tiles from the entire kitchen/dining area back past the refrigerator.  This part of the deconstruction will take a while but based on the progress I made today it will not take as long as I thought it might, all things being equal (which they never are).

While I was working Keith came to the bus in need of some assistance.  His zero-turn Hustler mower had quit moving and started smoking and was stranded in the northeast corner of our yard.  This particular mower is all hydraulic; the gasoline engine simply turns a hydraulic pump and fluid pressure is used to drive/steer the mower and turn the cutting blades.  Keith had oil on his arms and needed some paper towels.  He suspected a hydraulic hose had failed and the smoke was from the hot oil.  The immediate problem, however, was to get the mower back into its trailer some 400 feet away.

Keith got the mower stuck once last year in wet/soft soil along the north property line.  I was able to use our Cub Cadet lawn tractor to pull him out then so we figured we would try that again.  Just this past weekend I had charged the starting battery and moved the lawn tractor outside to make room in the garage for the furniture we took out of the bus.  It complained for a moment and then started up.  Keith had tow straps so I drove it over to his mower and we hooked the straps to the trailer ball on the back of the lawn tractor.

Keith’s mower weighs 1,200 pounds.  I doubt that our Cub Cadet weighs half that much even with me sitting on it.  I was able to pull it part way across a level-to-slightly-downhill part of the yard but once we hit an upslope my back tires started to slip.  Keith went to get Linda because the lawn tractor would stop if I got off and I was too far from the house to conveniently jump start it.  I continued to drive while Linda helped Keith push although we should have figured out a way to trade places.  It was very hard work for them but the Cub Cadet proved to be “the little engine that could” and we got the mower down by the third culvert (where the driveway for the barn is supposed to go).  We chose that location because it was downhill and close to Keith’s truck and trailer.

Keith’s trailer has a large rear ramp and pointed front like the bow of a boat with smaller ramp that opens at an angle on the driver’s side.  I tried pulling his mower up the rear ramp into the trailer.  The plan was for me to drive out via the front ramp.  Unfortunately the Cub Cadet could not maintain enough traction.  We unhooked it and I drove out the front and put it back in its parking spot.  I got a pair of wheel chocks from our bus and placed them in front of the trailer wheels while Keith unhooked the trailer from his truck.  He then attached the tow straps to the trailer ball on his truck, brought them I through the front ramp opening just off the nose of the trailer, and tied them around the front frame of the mower.  It took a few tries, and one repositioning of the strap on the mower, but Linda and I were finally able to guide it into the trailer while Keith pulled it up the ramp with his truck.

Linda got water for all of us while I helped Keith reload the trailer.  Keith is retired and doesn’t mow lawns for the money.  He’s a good guy who charges us a very reasonable price for the service he provides and we were glad to help him get his mower back in his trailer so he could go home, take a shower, and have a cold beer.  We should have done the same, but he probably took the trailer someplace to have the mower fixed and we both went back to what we were working on.

By 4:30 PM I was too warm and too sweaty to remove any more tiles.  I was also at the point where I was starting down the hallway and needed to remove some quarter round base molding that was installed over the edge of the tiles.  Tomorrow I plan to work earlier in the day when it is cooler, but I say that every day.

Linda cooked most of our dinner on the outdoor grill using the grilling mat to cook potatoes, zucchini, and Japanese eggplant that had been sliced in half lengthwise.  She also made Farro and served it as a side dish.  I think that is the first time she has done that; she normally uses it as an ingredient.  While the vegetables were grilling we sat quietly on the back deck enjoying the last of the first bottle of 2013 Egri Merlot we bought at Whole Foods last week.  The robin eggs in the nest under our deck have hatched so we are trying not to disturb the parents too much.  They need to fly back and forth constantly to feed their young but are understandably weary of us.

I had a call after dinner from Darin Hathaway, the Aqua-Hot technician who worked on our unit in June 2014.  It appeared to have an intermittent ignition coil then and would not fire at all when I had the bus a Butch and Fonda’s in the fall.  Butch and I replaced the burner in October 2014 with the one I bought from him.  That burner was running rich until I replaced the blower bearings while we were in Quartzsite.  Old bearings = slow fan speed = inadequate air supply = rich air:fuel ratio = inefficient combustion and sooty/smoky exhaust.  I still need to repair the original one but for now that is not a priority.  Darin said he could bench test/repair it but Lloyd DeGerald has the same capabilities.

Butch had eye surgery this morning at a clinic in Indianapolis.  I will call tomorrow and see how he is doing.  Linda is having a girl’s day out with our daughter tomorrow, Jack will be here to clean the carpets on Wednesday, Linda has to go to the bakery on Thursday, and I have to take the cats to the veterinarian Thursday afternoon.  I also expect Keith will return sometime this week to finish mowing the grass.  Saturday morning will be our usual ham radio club breakfast and Linda invited Steve and Karen for dinner on Saturday.  Somewhere in there we will probably go look at the Chevy Colorado (GMC Canyon), Toyota Tacoma, and the Subaru Forrester and Outback.  In between all of that I will be doing a load of laundry or two, working on the bus floor, and trying to figure out refrigerators, furniture, and wall treatments, so it is shaping up to be a busy week.  Heck, it’s going to be a busy summer, and maybe a busy fall.