Tag Archives: breakfast (ham radio)

2015/04/21-25 (T-S) IN, MI, Home

2015/04/21 (T) Back to Twelve Mile, IN

The outside air temperature dropped into the 30’s (F) last night and the air temperature in the coach fell to 60, so when I got up this morning I turned on the Aqua-Hot diesel-fired hydronic heating system to take the chill off.  We eventually got up, got dressed, and walked across to Small Town Brew to get a couple of cups of coffee and chat with owner Lisa Paul and her friend/neighbor, Ashley, who helps her run the coffee shop.  Both of them remembered both of us, which was nice.

It’s interesting sitting in a small town coffee shop, where everyone is a friend or relative, and just listening to the conversation.  We are outsiders her, of course, strangers to most of the folks who drop in, but everyone is nice to us.  Some are curious about who we are, and where we are from, but rarely ask why we are there, in this little coffee shop in this little town, surrounded by corn fields.  Of course, we usually mention that we are friends of Butch and Fonda, so that probably answers whatever questions they may have had.

We eventually returned to our coach and had breakfast.  We tried connecting our WiFiRanger to Butch and Fonda’s Wi-Fi router yesterday and it was able to connect and obtain an IP address but the data transfer rate was so slow that web pages would not load and e-mail would not download before timing out.  I turned our Verizon Mi-Fi on and we had a very weak but usable signal, so I connected the WFR to the Mi-Fi and we were able to do the few things we needed to do online.  We then went in the house to let Butch and Fonda know we were awake and see what they were up to.

Butch’s brother, John, and his nephew, Brock, showed up and helped Butch with the driver side front wheel assembly on Butch and Fonda’s MC-9 bus.  The tire/wheel was off when we arrived yesterday and I learned that Butch is replacing the hub bearings and seals, installing an automatic slack adjuster for the brake, and replacing the brake pads.  It looked like quite a job with some large, heavy parts, so I did my part by staying out of the way.  I also took a few pictures at Butch’s suggestion.  He does not want to write articles for Bus Conversion Magazine, but he has been interested in having me write articles about projects on his bus.

Linda spent some time working with Fonda’s new sewing machine that she got while they were in Quartzsite, Arizona.  It is a little smaller than a regular sewing machine, only weighs 13 pounds, and only cost about $130.  Linda gave her sewing machine to her sister many years ago but now that she is retired she is thinking that it might be nice to have one for mending tasks or projects, such as new privacy curtains for the bus.

Butch got a catalog recently from Crimp Supply in Royal Oak, Michigan, which is not at far from our house.  I glanced through it last night and it contains a lot of specialized parts that would be useful to a ham radio hobbyist or someone converting a bus into a motorhome.  I called and requested a catalog and had a nice chat with Debbie.  She was willing to provide me with additional catalogs that I can give to members of GLCC and CCO at the Back-to-the-Bricks and/or Surplus & Salvage per allies in August and September respectively.  She was also willing to show up in person and give a brief presentation on her company and hand out the catalogs.  Cool.

Brock had to leave after which Butch and John decided to go to the shooting range along with a third guy whose name I did not get.  I went along to see the range and watch what they were doing.  Butch had home-brewed some shotgun shells for his Ruger revolver and wanted to test them.  They caused the revolving chamber to jam so they will require some additional work.  John had a new semi-automatic pistol and wanted to see how it handled.  He also had ammunition he had loaded with bullets he had cast and wanted to test fire them.

I was offered the opportunity to shoot but declined.  I have never handled a pistol and it would have been a waste of good ammunition.  I did take a class in rifle marksmanship while I was at the University of Missouri – Columbia many years ago.  I was in the Air Force R.O.T.C. Program at the time and thought I should know something about how to handle a firearm.  Learning to handle a pistol correctly would have been more relevant, but I do not recall a course being offered for that.  I bought a Ruger 10-22 rifle at that time, and I still have it.  It’s a .22 caliber semi-automatic rifle designed to look like an M-1 carbine and features a 10-round rotary clip that is flush to the bottom of the stock when inserted.  I was only interested in shooting at paper targets so I added a scope to it.  It is safely tucked away with a trigger lock on it, but I have not fired it in many, many years.  I should probably bring it to Twelve Mile the next time we come down, let Butch inspect and clean it properly, and take it to the range just for grins and giggles.

John and the other guy went back to Logansport from the range.  When Butch and I got back to the house he continued working on the driver side front wheel of their bus.  I helped a little, but mostly by taking photographs for a possible future article.  After putting tools and parts away we sat and relaxed for a while and then all of us went to Logansport for dinner at Pizza Hut.  It was 8:45 PM by the time we got back so everyone said “good night” and turned in for the evening.

2015/04/22 (W) Chillin’ in Twelve Mile

Yesterday looked and felt more like winter than spring with gray, cloudy skies and blustery, cold winds.  The temperature overnight dropped into the mid-30s but we were toasty warm under blankets with our electric heating pad turned on.  I got up at 7:30 AM and turned on the thermostats.  The temperature in the kitchen was reading 63 degrees F but the temperature by the dashboard was only 53.  The Aqua-Hot has performed very well since I rebuilt the blower bearings and quickly brought the temperature in the coach up to 70 degrees F.

We put on our sweats and walked over to Small Town Brew for coffee and conversation with owner Lisa Paul and whomever else might be there.  Three local guys were enjoying their morning brew when we arrived.  They eventually left and were replaced by others.  Most of the patrons seemed to be retired or semi-retired farmers.  One fellow, Lee, chatted with us at length about a canvas covered hoop barn he put up.  It was constructed using laminated wood hoops rather than steel, was 30′ wide by 70′ long and cost about $4,000 15 years ago, although I was not clear whether that included the 4-foot high poured concrete walls.  He already owned concrete forms and the heavy equipment that one finds on farms, so he was able to do a lot of the work himself without renting equipment or hiring contractors.  Still, it has to be the lowest cost way to create a structure for getting our bus out of the weather and out of sight.  It is unknown, however, whether the Township and County would let us to put it up.

Butch left at 8:30 AM for medical appointments in Logansport and Fonda came over at 10:45 AM to gather up Linda for a girl’s day out.  Linda wanted to go to McClure’s Apple Orchard on US-31 between IN-16 and US-24.  Although it is very close to Twelve Mile Fonda had never been there.  They were then headed to Peru.  Although it is the same distance from Twelve Mile as Logansport and Rochester it is the city that Butch and Fonda visit the least.  Peru’s claim to fame is that it was the birthplace of Cole Porter and Emmet Kelly and was the winter home of several circuses many, many years ago.  I believe there is a circus museum there that Nick Russell wrote about in the Gypsy Journal.

With no bus project or social interactions I settled in to work on my blog and await everyone’s return.  It started out sunny this morning but by 11 AM was thickly clouded over and looking wintery with blustery winds.  The only bus project I had in mind to do today was to pull out the chassis batter tray, check the circuit breakers, disconnect the batteries, swap the upper 12 V pair with the lower 12 V pair and reconnect them.  It was not something I wanted to do alone and I did not have to do it today, especially under cool, windy, overcast conditions, so I ended up not doing it.

Linda and Fonda eventually returned, having first gone to the Walmart in Logansport.  Linda picked up some hummus and Snyder’s sourdough pretzels so we snacked on those for lunch.  Linda then hung out with Fonda while I continued to work in blog posts.  Butch finally returned from his medical appointments and busied himself with something.  Whatever it was, he was not outside working on their bus and neither was I.  I managed to get the post for April 1 – 3, 2015 uploaded to our blog.

Linda and Fonda developed a plan for dinner.  Fonda made a nice salad and baked a loaf of par-baked bread that we got from Marilyn.  Linda made black beans and rice and prepared a mix of fresh blueberries and strawberries for dessert.  Linda and I each had a glass of Franzia Red Sangria.  After taking all of dirty serving containers back to our coach we returned to the house to visit a bit longer and finally returned to our coach just after 9 PM.  That left me enough time to pull together the posts for April 4 – 6 and upload it before turning in for the night.

2015/04/23 (R) Return to Michigan

I was awake at 6:30 AM and finally got up at 7 and put on my sweats.  The Aqua-Hot was already on so I turned up the thermostats and turned on the engine pre-heat loop.  I also turned on the Broan cube heater and pointed it into the cockpit as the temperature on the dashboard was only 50 degrees F.  I walked over to Small Town Brew, got a cup of coffee, and said “so long for now” to owner Lisa Paul.  Linda was still asleep when I got back so I fixed a couple slices of toast for my breakfast, turned on our Verizon Mi-Fi, and settled in to take care of a few e-mails.  Linda finally got up and, as I suspected, had not slept well last night.  She had some toast and orange juice but had no interest in coffee, a strong indicator of just how tired she was and not feeling completely well.

When she was done with the toaster I turned the cube heater off and turned the electric block heater on.  The overnight low temperature was forecast to drop into the upper 20’s and starting the big Detroit Diesel at that temperature is hard on the engine so I wanted it nice and warm before I cranked it over.

Butch had an appointment with an ophthalmologist in Indianapolis around noon and had some other things to do down that way as long as they were there so he and Fonda planned to leave by 9 AM.  He came to our bus just before 9 AM to let us know they were close to leaving and that he put an air hose out by the automotive bay so I could fill the front tires on the bus if needed.  Based on the readings from our TireTraker TPMS, however, no adjustment was needed.

We planned to leave sometime after they did but not later than 10 AM.  The main reason for not leaving sooner was to give us time to digest our breakfast, but the other reason was our relatively short drive today to Camp Turkeyville, an RV park on I-69 just north of I-94.  This will be the first time I have been in Michigan, which I certainly consider home, since we left on November 30, 2014.  Turkeyville is only 80 miles from our house, but we will have a full hookup site so we can dump our waste tanks tomorrow morning and not need to use them on the final short drive to the house.

We started getting ready to leave around 9:45 AM.  I shut off the block heater, put Butch’s air hose away, and then took care of the chassis batteries, auxiliary air, and shorepower.  The DD fired right up and I switched it to high idle while it built air pressure.  As soon as the chassis was at ride height and the air dryer purged I pulled onto IN-16 pointing eastbound and pulled into the curb/parking lane.  That was around 10 AM.  I left the engine idling while Linda pulled the car up behind the bus.  By the time we hooked up the car for towing, checked the lights, and pulled away it was closer to 10:20.  I noted that the time was 10:30 AM EDT as we pulled onto US-31 N from IN-16 E.

Traffic was light and we had an easy run up US-31 to US-20 except for the 15-20 MPH crosswind from the WNW.  I also had a very cold breeze blowing into the cockpit by my feet and had to turn the heat up to stay comfortable.  We were an hour into our trip when I finally realized that I had not opened the air supply valve for the shutters on the two front house air-conditioner condensers which are installed in what is normally the spare tire bay.  Those shutters are held open by a spring and held closed by air pressure.  When they are open air can easily find its way into the cockpit.  There is also a mechanical damper that is supposed to regulate fresh air flow to the cockpit, or cut it off completely, but the flexible actuator cable broke some time ago and the damper/cable are difficult to access so it has not been repaired.  Either the cable broke with the damper in the closed position or I taped some sort of cover over the air inlet once upon a time because once I closed the shutters for the A-C compressors I no longer had cold air coming in by my feet.

Traffic was heavier on US-20 eastbound but it always is as it runs just south of South Bend and Elkhart, Indiana, and a bit north of Goshen.  It is still a limited access highway until east of Elkhart, so it moved along up to that point.  There was one stretch between there and Middlebury where major construction was taking place, but we got through that easily enough.  After that it was a nice, rolling, 2-lane highway and we rolled along at 55 MPH except for the occasional town on intersection.  We always enjoy driving through this part of Indiana.

We turned off of US-20 onto I-69 N, crossed into Michigan at 12:53 PM EDT, and pulled into the Michigan Welcome Center five minutes later.  We only had 37 more miles to our destination but we both needed a short stretch break and I wanted to open the air valve for the A-C shutters, which is in the bay under the driver’s seat.  We resumed our trip and exited I-69 at exit 42 around 1:45 PM, crossed over the highway, and traveled the 500 yards to the Camp Turkeyville entrance.  We followed the long, wide, winding entrance road and stopped at the office where Linda got us registered.  They put us in a 50A full hookup pull-through site with easy access that was long enough for us to leave the car hooked up for towing.

We went through our usual arrival routine and then Linda fixed a light lunch of French Country Vegetable Soup and a tofu hotdog on pita bread with mustard and relish.  She also made a pot of coffee.  We connected our WiFiRanger to the RV Park Wi-Fi system but did not seem to be able to move any data so we turned on our Verizon Mi-Fi and connected the WFR to it.

Linda spent the afternoon reading a book on her iPad and I mostly worked on my blog post for April 7, 8, and 9.  I had 14 photos for that post but inserted them into the post rather than put them in a WP image gallery.  I logged into our personal WordPress site, installed WordPress 4.2, and then installed updates to plugins and themes.  Once that was done I uploaded the blog post and uploaded/captioned/inserted the photos and generated the tags.  I clicked the “Publish” button about 7:10 PM.

Linda put dinner on the table about 10 after I finished working.  She made a nice tofu scramble, a dish that vaguely resembles scrambled eggs, and served it with toast and jam, a small glass of juice, and black seedless grapes.

I thought about working on my blog post for April 10th, as it is the last one for which I have photos, but I was too tired to get involved in that tonight.  We pointed our front OTA TV towards Battle Creek and Kalamazoo, found the local CBS station, and watched a couple of episodes of The Big Bang Theory and whatever else was one.  We caught some local weather and decided to enable the diesel burner on the Aqua-Hot, turn the thermostats on, and set the temperatures for 60 degrees F.  The overnight low temperature was forecast to be 27 and it was already 29 when we went to bed.  Welcome to Michigan in late April.

2015/04/24 (F) Touchdown

I awoke at 6:30 AM to an outside temperature of 27 degrees F.  Our coach has several ways it can be heated if we are plugged into adequate electrical power, including three electric toe-kick heaters.  I turned on the Aqua-Hot diesel burner and electric heating element last night before going to bed and left the living room and bathroom thermostats turned on with the temperature dialed back to just under 60 degrees.  I also turned on the Broan cube heater, dialed back the thermostat, and set in on the step to blow into the cockpit.

I got up at 7:15 AM and put on my sweats. It was 60 degrees F on the kitchen counter, but the refrigerator adds some heat mid-coach.  The thermometer on the dashboard read 53.  I turned the thermostats up to 68 and turned on the Aqua-Hot engine preheat loop.  I also turned on the front electric toe-kick heater.  I made coffee and then turned on the electric block heater for the engine.  I checked e-mail and monitored our amperage while I waited for the coach to warm up and for Linda to get up.  We were drawing about 30 A on Leg 1 and 20 A on Leg 2.  On a true “50 A” RV electrical service with a main circuit breaker that functions correctly we can safely draw 40 Amps on each leg, so our usage was not going to trip any breakers.

By 10 AM the temperature was up to 40 degrees, the sun was shining, and it’s was delightfully cozy in the rig.  I got a call from Michele Henry at Phoenix Paint in response to an e-mail I sent her yesterday and talked to her for 15 minutes.  We had planned on a 10:30 AM departure but by the time I connected the sewer hose, dumped the waste tanks, and put the hose away it was 10:45.  We had the bus and car ready to travel by 11AM and pulled out of our site.  We had to wait for a few minutes until someone moved a 5th wheel which they had temporarily parked in the middle of a two-way road while waiting to get into their site.  We finally made our way out of Camp Turkeyville and pulled onto I-69 N at 11:13 AM.

We had an easy run to our house and our wheels “touched down” on our driveway at 12:45 PM.  Even the dirt roads for the last two miles of our trip were in reasonably good shape, which made for a nicer homecoming.  We opened the house, put the cats in their carriers, and took them inside.  I got the bus plugged in and the air shut off while Linda put the batteries back in the water softener and sanitizer and turned the well pump on.  I turned the gas back on for the kitchen and fireplace and then set all of the thermostats up to 65 degrees F.  We unloaded a few things from the bus and then had lunch, after which I sent text messages to both of our children and to Chuck Spera to let them know we were home.

After lunch we unhooked the car from the bus and continued unloading the bus but did not get everything taken off.  I was tired and took a long nap, only getting up when Linda told me it was time for dinner.  We had a Daiya Mushroom and Garlic pizza.  We have used Daiya vegan cheese for a while but did not know they made pizza products until we saw them at the Dierbergs Market in Edwardsville, Illinois.  It had a thin, crispy, rice flour crust (gluten-free), lots of garlic and cheese (of course), and was very tasty.  I wish we could buy them near our house.

After dinner I called Butch to let him know we made it home safe and without any new or reoccurring bus issues.  He had reassembled the driver side steer wheel and discovered that the new brake drums he got from MCI some time ago are the wrong ones, so he is going to have to track down the correct ones next week.

2015/04/25 (S) Return to Regular

Do you remember when OTA TV stations used to break in to programs with special news bulletins or emergency alert tests?  At the conclusion of such interruptions the announcer would say “we now return you to your regular programming.”  Having spent most of 61 years living in stationary dwellings we still consider being back at our house to be the baseline for our regular lives.  The last two years, however, we have spent half of the year, more or less, living in our converted motorcoach.  That fact, combined with the fact that we moved to a new-to-us house just before we started our extended traveling, has altered our perception of what constitutes “regular.”  All we know for sure is that living this dual lifestyle is our new normal and we like it.

Whether living at home or in the bus we have routines.  Part of our “at home” routine is Saturday morning breakfast with our friends from the South Lyon Area Amateur Radio Club (SLAARC) and that is how we started our day.  We took our usual route to South Lyon and were surprised by the extent of the construction work at the I-96 and US-23 interchange.  We knew this interchange was scheduled to be rebuilt starting this year but as of March 1st, when Linda last drove through there, work had not started.  A lot has happened since then, and from the look of things this is going to be a BIG project.

There were a LOT of people at breakfast, 24 by Linda’s count.  It was good to see our friends and ease back into ham radio talk.  The club president, Harvey Carter (AC8NO), had the personalized club jackets we ordered from Sunset Sportswear in South Lyon over the winter so we got those from him after we were all done eating.  The jackets are dark blue with fleece lining and yellow embroidery that looks very sharp.  The left breast says “South Lyon Area” on top and “Amateur Radio Club” underneath.  On the right breast is our first name (in script) on top and our call sign underneath in block letters.

We stopped at Barnes and Noble on the way home to pick up a gift for grand-daughter Katie and found two books that we thought would interest her.  One was on rocks and gems and the other was on snakes, both of which are interesting to Katie.  Both are also an integral part of the desert southwest where we spent the winter.

When we got home I set about the tasks of moving various pieces of technology from the entrance foyer to my basement ham shack/office, reconnecting it to power and our network, and starting it up.  I started up our Linux box but the video driver would not “catch” so I shut it down and restarted it in Windows 2000 Pro, updated the es|et nod32 anti-virus database, and installed three Microsoft updates.  I checked e-mail on my primary laptop, responded to a couple, and then installed updates on all of the websites I manage.  WordPress just released version 4.2 and each new release triggers a flurry of plug-in and theme updates.

Our daughter, Meghan, had arranged for us to come over mid-afternoon to visit and have dinner without the bother and fuss of fixing a big meal.  Minn, the female cat, hid immediately but Inches, the male cat, hung around for a while.  Grand-daughter Katie is working at Pizza House in Ann Arbor where he dad, Chris, has been the general manager for a long time, but she got off work and arrived just after us followed by Chris, who had run out to pick up dinner at Seva.

Our son, Brendan, daughter-in-law Shawna, and grand-daughter Madeline showed up a little later, and Inches promptly disappeared.  Madeline is very sweet and interacts with her two kitties, Gus and Iggy, just fine but our cats, and Meghan’s/Chris’s cats, disappear whenever she comes to visit.  They are just not used to the size, motions, and sounds of a 28 month old.

Seva is a vegetarian restaurant that has been a staple of the Ann Arbor restaurant scene for many years but recently moved out of downtown to a location on the far west side of Ann Arbor.  While not just around the corner from Chris and Meghan’s house it is much closer, and easier to get to, than driving into downtown.  Many of their menu items are vegan, or can be made vegan, and that is mostly what they ordered.  We had a nice visit with excellent appetizers and main dishes, a dozen choices in all, and a nice Riesling wine from Washington State.

After appetizers we distributed the gifts we had picked up for everyone.  Besides Katie’s books Madeline got a “Dr. Seuss” book about deserts and a t-shirt from Marilyn with a design on the front that changes color in the sunlight. Both of our children, who kept an eye on our house for us over the winter and took in our mail, got the following:  A bottle of Red Chile Wine from St. Clair Winery in Deming, New Mexico; a bouquet of pequin chiles from Hatch Chile Sales in Hatch, New Mexico; a box of Prickly Pear Cactus jellied candies and a jar of Prickly Pear Cactus jelly from Organ Pipe Cactus National Monument in Arizona; a bag of Green Chile Pistachios from Eagle Ranch (Heart of the Desert) in Alamogordo, New Mexico; a two box set of olive oil and peach balsamic vinegar glaze from Queen Creek Olive Mill in Queen Creek, Arizona; and a non-stick grilling mat from the “Big Tent” RV Show in Quartzsite, Arizona.  We appreciate what they do when we are away which would be more complicated for us without their assistance.

We enjoy looking for gifts that are unique to the areas we visit and tend to limit ourselves to items that are consumable so no one has to find room to store or display something, at least not for very long.  We saw many wonderful art and craft objects this winter but they present a special challenge beyond simply getting them home.  We are no longer collecting “things,” as we already cannot display or store the stuff we have, and our children are in somewhat the same situation (which is why we still have a lot of stuff instead of them having it).

Then there is the matter of taste.  Both children have their own taste in art and have carefully arranged items for display on their walls and shelves.  As much as we might like something, and think someone else might like it, buying art for other people is fraught with peril because there is an implied expectation that it will be displayed.  If it is displayed but the recipient does do not like it then the gift is intrusive.  If it is not displayed the giver is disappointed and potentially offended.  Better to stay clear of all that by avoiding surprise gifts.  The exception is if we know they are looking for something in particular and we come across one.  In that case it is a simple matter to take a photo with one of our smartphones and message them to see if they want it, making it clear that “no” is an acceptable answer.

Madeline goes to bed at 8 PM so she left (with her parents) at 7 PM.  Both Minn and Inches came out shortly thereafter to have a bite to eat and get the attention they had missed for the last four hours,  We stuck around for another hour which gave us just enough time to get home before it got really dark.  Brendan and Shawna had kept/used Linda’s Honda Civic all winter. They came in two cars and went home in one so that Linda could get the Civic back to our house.  There is a chance that she will have to go into the bakery a day or two this week and I do not like be without transportation, especially when we have a lot going on.

We sat in the living room for an hour reading and relaxing with our favorite iPad apps/games but without the benefit of our natural gas fireplace logs.  I lit them when we got home and they operated for about 60 seconds and then shut off and would not relight.  I turned the pilot flame off and will deal with that tomorrow.  I went to bed, read for a while longer, and then went to sleep.

 

2014/11/03-09 A Week at Home

Note:  There are no photographs for this consolidated post.  Sorry.  🙁

2014/11/03 (M) Getting Ready

Linda was up early and off to the bakery.  I got up an hour later and had some raisin toast for breakfast.  Whenever I have had time since I got home on Friday I have been working on the project list for our bus.  I worked on it some more this morning but eventually had to set it aside while I made some phone calls, tried to deal with an issue with Linda’s Samsung laptop computer, and got documents ready to upload to my Dropbox for a meeting on Wednesday afternoon.

I called Bill Jensen, the national service advisor for conversion shells at Prevost Car Inc., but his voice message said he was unavailable indefinitely and gave alternate contact info.  The main contact was Kevin Laughlin so I called him.  I described the shorter ride height linkage and the downward pointing position of the ride height valve lever arm in its neutral position.  He agreed that neither of these seemed right.

I called Prevost and ordered a new ride height valve and two CX-96 (Gates) drive belts for the OTR air-conditioning compressor.  I then called Martin Diesel in Defiance, Ohio and made an appointment to have the diesel generator in our coach serviced on the 20th and 21st if needed.  I also needed to call Webasto technical support but did not get that call made today; maybe on Wednesday (or Thursday).

Linda’s Samsung laptop suddenly decided to turn the screen brightness down and she has not been able to turn it back up.  It’s bright enough to see in somewhat dim conditions, but still uncomfortably dim for general office use.  I did a Google search and found that lots of other folks had encountered the same problem and had advice on how to fix it.  I shared several links with Linda but she could not get it to work.

I put the finishing touches on the FMCA Freethinkers Associate Chapter’s financial statements, roster, and minutes of last year’s’ meeting.  I uploaded them to Dropbox and e-mailed the chapter members that the materials where there.

Linda got home later than usual from the bakery so we decided to go to La Marsa in Brighton for dinner.  It’s our favorite local restaurant but was more crowded than on a regular Monday due to the buffet they have the first Monday of each month and we had to wait about 20 minutes for a table.  We ordered the almond garlic Ghallaba from the menu, one of our two favorite vegan dishes, but it was not as good as usual.  Not bad just somewhat flat, as if they had left out the garlic.  It was 8:30 PM by the time we got home and we turned in for the night fairly quickly.

2014/11/04 (T) Election Day

Linda did not go into the bakery today.  We spent much of the day together and this is what we did:

  • Had raisin toast for breakfast with Orange juice and banana…
  • ..
  • Got passport photos at Rite-Aid in Brighton…
  • Went to Panera for coffee…
  • Drove to Dearborn for dental hygienist appointments…
  • Drove back to Farmington Hills where we went to McDonald’s and had French fries for lunch…
  • Drove a mile to the Henry Ford Health System Columbus Center in Novi for flu shots…
  • Drove back home where we had a few chips and hummus for an afternoon snack…

I drove to Brighton Honda for a 3:30 PM appointment to have the Element’s recalled air bag serviced.  The appointment took 45 minutes by which time the traffic was really bad.  Because of the combination of rush hour traffic and the ongoing re-paving of Grand River Avenue just west of the dealership a left turn was going to be near impossible.  I needed to get to Latson Road and Grand River Avenue so I made the easy right (and correct) turn out of the dealership and quickly got on I-96 westbound.  I took the relatively new Latson Road exit and stopped at Walmart to stock up on ICE brand water.  I went to Meijer’s for a Mega-Millions lottery ticket and then to O’Reilly’s Auto Parts for two more 12VDC duplex power outlets.  It was still raining lightly, as it had been for most of the day, so I returned home by way of Grand River Avenue and Hacker Road which kept me on pavement for most of the trip.

Linda heated up the leftover chili for dinner.  She continued to try different things to get her Samsung laptop to allow her to adjust the screen brightness and return it to normal but nothing worked.  I took a little time to update WordPress websites and tweak the Wordfence login security.  We then filled out and printed our passport renewal applications and got them ready to mail.  We also figured out how to create, share, and synchronize multiple calendars on multiple devices so that we can now see the same information on our laptops, tablets, and smartphones.  It’s all about Google.

Linda was tired and needed to get up early but something had broken on our bed foundation and needed to be fixed, if only temporarily.  We are still using the plastic foundation that came with our select comfort air mattress years ago and one of the cross members that carry the load to the side rails had come loose from the interlocking top platform and dropped down.  We had to get the mattress off the bed to work on the platform.  We got it put back together for now, but we need to get a box spring or other foundation to replace it.  That probably won’t happen until spring.

2014/11/05 (W) The Day After

Yesterday’s election results were generally as predicted, so nothing to cheer about from our point of view, but the world did not come to an end either.  Elections change very little in the short-term and the daily tasks of living continue regardless of who does or does not get elected.  We were happy, of course, that Gary Peters won the U. S. Senate seat and that Debbie Dingle was elected to the U. S. House of Representatives.  We were especially pleased that our friend, Brian Robb, won re-election to the Ypsilanti City Council and that Richard Bernstein was elected to the Michigan Supreme Court, but saddened to learn that Casandra Ulbrich failed in her attempt to get re-elected to the State Board of Education.  And so it goes with American politics.

Linda was back at the bakery today reviewing the period accounting and continuing to answer questions and monitor the use of the new software.  I took care of some e-mails and then headed to the Brighton post office to mail our passport renewals.  I refueled my car at Meijer’s for $2.899/gal and then stopped at Bed, Bath, and Beyond to exchange two Sodastream CO2 cartridges.  BB&B is in the same strip mall as the Panera, so I stopped in for some coffee.

When I got home UPS had already delivered my package from Prevost.  I took the trash can to the street first and then I opened the box and verified the contents.  I installed one of the Sodastream cartridges but the display would not reset.  The unit has an LCD display so I figured it had a battery hidden somewhere.  I released a clip at the top of the display and the whole display module came out with the nickel-sized battery was installed on the back side.  I started to remove it and the display changed, so I figured it needed a new battery.  I did not think we had any of this type of battery in the house but Linda told me later that we did.

I had not backed up all of my photo files from last week so I spent some time in the early afternoon copying files from my camera to my laptop and then from my laptop to both of our NAS units.  I printed off all of the documents I needed for the FMCA Freethinkers Associate Chapter annual meeting and was responding to an e-mail when Tony and Mark from GSI showed up to install the new natural gas fireplace logs and hookup the new natural gas outdoor grill.

Tony and his wife own GSI but he had Mark install the fireplace while he worked on the grill.  He installed the new disconnect but when leak testing discovered that there was a small leak on the output side of the shutoff valve.  I had to shut off the gas supply to that branch circuit, which also supplies gas to the kitchen range and the fireplace, so he could work on it.  Tony removed the new disconnect, installed a new valve, and reinstalled the disconnect.  I turned the gas supply on and he retested for leaks but did not find any.  He suggested that we run it for a while to burn off manufacturing oils and other things that initially produce odors and can affect the taste of foods cooked in the unit.  I got the stainless steel heat diffuser and two cast iron grills and set them in place.  The left burner lit easily using the battery powered piezoelectric igniter and the right grill lit easily from the left one.

Linda got home at 3:30 PM while Tony and Mark were still working and took over interacting with them while I got ready for our 4 PM telephone meeting.  She got instructions on how to light/operate both appliances, paid them, and then joined me for the meeting.  By 4:05 PM we had 14 “F” numbers represented, safely exceeding our quorum requirement of 10, and Bob Pelc called the meeting to order.  The meeting was friendly but efficient.  We conducted all of the necessary annual chapter business and adjourned at 4:42 PM.  I was re-elected to another 2-year term as chapter secretary but did not run for chapter vice-president, the position I have held since the chapter was formed in June 2010.

After the meeting Linda shut off the outdoor grill and we sat in the living room monitoring our fireplace logs and discussing dinner options.  As a result Linda decided to make waffles.  She tried a different recipe and substituted pastry flour instead for regular flour.  Neither of us understand the difference, at a food chemistry level, but she apparently invented/discovered something that will stick to Teflon-coated cookware; really, really tightly. The waffles were crispy and tasted fine, once we got them out of the waffle iron, but they would not have won any prizes for presentation.

We spent a couple more hours after dinner sitting in the living room letting the firelogs operate with the flue opened a bit.  Tony and Mark said it can take up to 20 hours of use for the unit to stop producing odors and suggested that we operate it with the flue slightly open while breaking it in.  The logs are a non-vented design, just like a kitchen range, which means they are designed to operate without being vented to the outside yet not produce harmful combustion by-products such as carbon monoxide.  At 8:50 PM I turned the logs down to their lowest setting.  Linda shut the unit off at 9:15 PM (it has an On/Off/Remote switch but we do not have a remote).  The pilot light does not consume enough air or produce enough heat and combustion by-products to be a safety or economic concern, so I left it on, closed the flue, and went to bed.

2014/11/06 (R) Inductive Thinking

Linda left the house before I awoke and spent a long day at the bakery.  I spent most of the day at the dining room table working at my computer.  I typed up the draft minutes from yesterday’s FMCA Freethinkers annual meeting, generated PDFs of the chapter’s financial reports, uploaded files to the Dropbox folder, and reorganized it.

I took a break at noon and drove into Novi to have a look at Chuck’s latest bus projects and then go to lunch at the local Leo’s Coney Island.  The new wedge cabinet and Corian top look and fit great between the end of the new couch and the kitchen base cabinet.  He did a nice job replacing the outside Jenn Air electric cooktop/grill, which was mounted in a pull-out tray in one of the bays, with two Indufix 2-hob induction cooktops.  The tray has an open bottom and is supported by four heavy duty extension slides, two on each side.  The induction units are from Germany and came with European “208VAC” plugs.  They are strictly 208/240 VAC devices and do not have a neutral connection.  The wire colors are also different with brown and blue for the L1 and L2 (hot, load) and yellow/green for the ground.  Chuck had an addendum sheet explaining the color codes and how to match them up to the U. S. standard.

For lunch I had a small Greek salad without feta cheese and an order of French fries.  Chuck had a more substantial meal with a salad, chicken on skewers, and rice.  I was back home by 3:00 PM and settled back into my computer-based work.

Linda got home around 6:15 PM and made barbecued tofu sandwiches with grilled onions and corn on the cob.  We washed it down with Leelanau Cellars sweet Red Table Wine.  It was labeled semi-sweet but it reminded me of the King of the North wine from Red Trail Vineyards in North Dakota which had a distinctly grape juice taste.  I liked it and Linda said she did too, which surprised me a little, as she tends to like dryer red wines.

After dinner Linda read and played online word games on her iPad to the warm glow of our new natural gas fireplace logs.  These logs are a high-efficiency, unvented design and actually through heat into the living room rather than up the chimney.  I continued reformatting the Freethinkers chapter roster, uploaded it to my Dropbox, and e-mailed the members to let them know it was available and ask them to review their listing and get back to me with corrections.  RVillage had notified me that someone wanted to join both the CCO and GLCC groups so I logged in and approved those.

I discovered the other day that Wordfence will allow me to block individual IP addresses so I would like to find the time to go back through the “User Locked Out” notification e-mails and enter some of the most egregious repeat offenders.  But not tonight.  It’s late, Linda is already asleep, and I’m tired.

2014/11/07 (F) 50% plus

My objectives for today were the following:

  • Finish up yesterday’s blog post and start working on today’s…
  • Read a few of the blogs I follow in Feedly (I am way behind)…
  • Move the spare Aqua-Hot from the garage to the library…
  • Move any other freeze sensitive items from the garage to the library…
  • Finish the drywall compound work in the library…
  • Call Webasto technical support…
  • Measure the inside of the Honda Element…
  • Buy plywood to build the storage divider for the Element…
  • Start building the storage divider for the Honda Element…
  • Use the blower to clear the leaves from the deck and planting beds….
  • Prepare the FMCA Freethinker annual chapter certification paperwork…
  • Select a few photos to go with blog posts going back to early October…
  • Start uploading blog posts to our website…

That was obviously more than I could possibly accomplish in one day, but it helps to write it down.  Here is how I did…

  • Finish up yesterday’s blog post and start working on today’s…check.
  • Read a few of the blogs I follow in Feedly (I am way behind)…check.
  • Move the spare Aqua-Hot from the garage to the library…check.
  • Move any other freeze sensitive items from the garage to the library…some.
  • Finish the drywall compound work in the library…check.
  • Make an unplanned trip to Lowe’s and Sherwin Williams for paint supplies…Yes.
  • Prime the areas in the library where the drywall work was done…Yes!
  • Call Webasto technical support…check.
  • Measure the inside of the Honda Element…check.
  • Buy plywood to build the storage divider for the Element…no.
  • Start building the storage divider for the Honda Element…no.
  • Use the blower to clear the leaves from the deck and planting beds….no.
  • Prepare the FMCA Freethinker annual chapter certification paperwork…no.
  • Select a few photos to go with blog posts going back to early October…no.
  • Start uploading blog posts to our website…no.

That’s 6-1/2 + 2 out of 13 + 2 or 8-1/2 out of 15 which is over 50%; not bad.  I might have gotten one or two other things done, or at least started, but we ended up meeting Chuck at BD’s Mongolian Bar-B-Que in Novi for dinner at 7:00 PM.  Barbara was still attending to out-of-town family business and Chuck appreciated not dining alone.  We were at the restaurant for over two hours and had a nice meal and great conversation in spite the very loud, upbeat youthful vibe of the place.  Next time we will try Sizzling Sticks in Northville; same kind of food but a much more subdued atmosphere according to Chuck.  Overall it was another good day.

2014/11/08 (S) Steve and Karen

We had a good sized crowd at the ham radio breakfast this morning.  We did not have to be anywhere at any particular time, and we were enjoying the conversation, so we stayed a little longer than usual.  Once we got back to the house I changed into work clothes for drywall and painting while Linda gathered up the recyclables and finished her grocery list.  She left to run the errands and I got the painting tools/supplies out.

Linda dropped off the recyclables, stopped at the bank, stopped at Lowe’s to return something that it turned out we had not purchased there, and then did the grocery shopping at Meijer’s.  While she was gone I put a first coat of paint on the areas of the west wall of the library where I had repaired the drywall.  The item she planned to return was a can of Great Stuff Fire Block that broke yesterday when I tried to use it.  It turned out that I had not purchased it at Lowe’s as they do not sell it.  They sell a 3M product for the same application, which I had sitting in the garage but had overlooked.  I used it to try to fill gaps around the gas supply pipe and the condensate drain, which were open clear through to the outside, and the double-walled flue pipe and gas pipe that pass through the furnace closet wall.  I applied the foam from inside the furnace closet and will need another can to finish the job from the outside of the closet.

Linda started putting together supper while I gathered up laundry and started a load.  I spent some quiet time with Jasper, our very sweet 10-year old cat, and then settled in to write and read for a while.

Steve and Karen arrived at 5 PM and we visited while Linda put the finishing touches on dinner.  She made the warm Farro dish with kale, dried cranberries, almonds, garlic, and onions and roasted asparagus as a side.  She has the Farro dish tagged “good for company.”  We still have a few bottles of the 2009 Egri Merlot and the slightly sweet full body of this wine went very nicely with the earthy Farro.  She made a chocolate cake for dessert with raspberry sauce made from fresh raspberries.  I think the cake was her best yet; very moist with just the right texture.  Vegan baking is tricky and Linda is still figuring it out.  Sometimes the cakes are a bit dry and other times they lean towards being brownies but tonight she got it just right.

Steve brought his Raspberry Pi single board computer (SBC) and an SD card with photos of their recent (September) trip out west.  He connected the Pi to our TV/monitor in the basement so we could all comfortably see the photos.  They had excellent weather and some fall colors the days they were in Yellowstone National Park and got some nice images.  But we spent most the evening sitting in the living room enjoying the new natural gas firelogs and catching up on what we had been doing since we last saw each other.  They left around 10:30 PM and we had everything picked up by 11 PM and headed off to bed.

2014/11/09 (N) Wrapping Up

Today was mostly about wrapping up the library drywall/painting project and other minor chores, doing laundry, and getting me packed for a two week return visit to Twelve Mile, Indiana to work on our bus and help Butch and Fonda work on theirs.

Linda made blueberry pancakes for breakfast, which is always a treat.  I made a trip to Lowe’s for a nine inch disposable paint roller cover and another can of 3M Fireblock spray foam.  I used the can of spray foam to finish sealing the gaps in the utility closet wall openings where the black iron gas pipe and the double-wall flu pass into the garage.  I only needed a little more foam to finish the utility closet openings so I used the rest of the can to fill gaps around the rear entrance door in the garage.

I used some scrap packing paper from recent Prevost shipments and some frog tape to mask the opening for the library furnace return air grille.  I then used flat black spray paint to make everything that is visible through the slots in the cover disappear.  Finally, it was time to paint walls.

I used a small brush to cut in the adjacent wall and ceiling with the Sherwin-Williams Extra White satin finish paint.  I removed the cover plates from two outlets and a switch and then rolled on a new/final coat of paint.  I cleaned up my paint supplies and then we brought the outdoor grill (and cover) into the garage to store for the winter.  We also brought the patio table umbrella and base into the library and set the umbrella in the base for the winter rather than let in lie on the floor.

Linda made another batch of granola while I checked stuff on my computer and took care of laundry and packing.  We had leftovers for dinner at 5:15 PM and then headed to South Lyon for the monthly SLAARC (ham radio) meeting where I was re-elected as VP for a second year and Linda was elected Treasurer for the coming year.  The program was a presentation on Software Defined Radios (SDR) by Mike Alexander (N8MSA).  When we got home we finished the chocolate cake and raspberry sauce with a glass of Leelanau Cellars Autumn Red wine and then turned in for the night.

 

20141030-1102 Fixing Buses in Indiana

2014/10/30 (R) To Kokomo We Go

Well…sort of.  Our actual destination was Maple Grove Distributors in Galveston, Indiana, which was in the general direction of Kokomo, but not as far.  (It’s pronounced “gal VES ten” with the emphasis on the second syllable.)  The tie rod ball ends that Butch ordered had finally come in and he wanted to get them early this morning so that: 1) We could get back and take advantage of a relatively nice late October day, and 2) He would have them for tomorrow when the weather is forecast to be lousy and thus a good day for inside work such as fabricating ride height linkages.

PS rear corner bedroom cabinet with slot in door for TV/monitor wires.

PS rear corner bedroom cabinet with slot in door for TV/monitor wires.

In spite of the nice weather I spent most of the day working inside my bus, stopping occasionally to help Butch with something.  I don’t have a lot of outside projects at the moment, or at least none that I felt like working on, and I really wanted to get the bedroom TV cabinet taken care of.  As with the front TV cabinet that I worked on for the last couple of days, the bedroom cabinet once housed a 19″ CRT TV set and a VHS tape deck.  I removed those in late 2011 while the bus was at Phoenix Paint and had Jaral Beaty make doors to cover the openings.  Once those doors were installed, I mounted 22″ diagonal, 16:9 aspect ratio, LCD/LED flat panel TV/monitors on each door. The power and signal connections, however, were inside the cabinets, so for the last couple of years the cables have come out of the bottom/rear of the TVs and under the bottom edge of the doors and into the cabinets.  This arrangement prevented the doors from being closed, even though they had spring loaded ball catches, so we have held them closed with a couple of pieces of bright green Frog Tape.  The tape is sticky enough to hold the door closed but does not seem to leave any reside even after being in place for a while.

The wires from the TV/monitor pass through the slot in the door so the dorr can be closed and latched.

The wires from the TV/monitor pass through the slot in the door so the dorr can be closed and latched.

As with the front TV cabinet door, I created a horizontal slot behind the TV, positioned to allow the cables to come down out of the back of the TV and bend gently through to the inside of the cabinet.  I removed some unneeded cable and coiled up other cables and secured them with zip ties that have a mounting tab with a hole for a screw.

My two outside projects were brief.  I got back under the front of the bus between the front tires and unbolted the ride height linkage.  It unbolted from the ride height valve lever arm easily but not from the axle bracket.  Fonda got a can of Cyclo Breakaway and some paper towels for me, but even after spraying the nut and letting it sit it would not come loose.  I am not the strongest guy in the bus yard so I put some more muscle into it and broke the bolt off with the nut still stuck tight to it.  The other half of the bolt then slide out easily.

As long as I had my wrenches out I slide under the rear end of the bus to see if I could free a couple of wires for the auxiliary braking system that were pinched under a mounting pad for the rear bumper fascia.  The stud had a Nylok nut on it that was barely threaded onto the stud.  The reason, I guessed, was the stud was at an angle that made it difficult to get a socket and ratchet on it.  I was able to loosen/tighten it using a universal (swivel) adapter between the socket and the ratchet.  While I was under there I noticed a second stud with a barely threaded Nylok so I tightened it as well.  One of the things you have to watch out for on a used RV is all the work that other people have done ‘just well enough’ to get it ‘out the door’ without something falling off in the parking lot.  These are always things that are hidden and relatively inaccessible, which is why they were not done correctly or completely in the first place, but the assumption is you will never see them.

My other inside project was to separate the load wires for the lighted entrance handle and the patio light and put them on separate switches.  It turned out that the front most switch just inside the entrance door (next to the passenger seat) was supplying 12VDC power to three circuits, the two just mentioned and a third one that, as of this writing, is still a mystery in that I was unable to determine anything that was being controlled by those wires.  The first (front) switch now controls only the lighted entrance handle, the second (middle) switch controls only the patio light, and the third (rear) switch controls…well, I don’t know what it controls but it definitely puts 12VDC power onto a wire that goes somewhere.

I assisted Butch briefly in locating their front fan-coil heat exchanger relative to the bay where the coolant lines will go.  Later in the day I helped him position the front suspension of their coach to the MCI specified spacing for the air springs so he can fabricate the ride height linkage to the correct length.

I needed a few parts for projects I might want to work on tomorrow so I left at 7 PM and drove to the Home Depot in Logansport.  That also gave me a chance to call Linda and chat about cell phone data plans.  I got back to Twelve Mile at 8:30 PM.  Butch and Fonda were already having their dinner so I went to my bus and made a salad.  After I cleaned up the day’s food utensils I installed the 6-outlet surge protected adapter in the AC duplex outlet in the bedroom TV cabinet.  That completed my work for the day and I returned to the house, visited briefly, and retired to my room to check e-mail, offload photo files from my camera, and write this post.

2014/10/31 (F) Boo! Snow (Boo)

After a relatively mild October the weather decided to turn more seasonable just in time for Halloween.  I was originally going to title this post “Foot Pounds and Gigabytes” but decided to acknowledge All Hallows’ Eve instead, along with the dramatic change in the weather.

A couple of days ago I bought a torque wrench from Butch that is adjustable up to 600 foot pounds, which is the kind of torque needed to tighten and loosen the lug nuts on our bus wheels.  It’s a very big torque wrench; over three feet long.  I need to buy a compatible socket to go with it.  Today was also the last day for the Verizon and AT&T double your data plan promotions, so I planned my day to put me in Elkhart, Indiana while one of the corporate stores was still open.

I got up around 8 AM and spent 45 minutes doing some preliminary packing after which I went out to my coach and had breakfast.  We had snow flurries around 9 AM this morning and did not work outside today save the few minutes I spent adjusting the air pressure in the tires of my Honda Element.  Today was mostly about shopping.

I got a cup of coffee from Small Town Brew and then we headed to Logansport where we did most of our usual circuit:  NAPA Auto Parts, O’Reilly’s Auto Parts, Rural King, Aldi’s, and Walmart.  (The only regular place we did not go was Home Depot.)  My only purchase was a 12VDC dual outlet with a mounting flange that I found at O’Reilly’s.  I plan to use it to create power connections for the GPS and TPMS receiver.  (I realized later that I should have bought three of them as I also need to supply power to the DVD camera/recorder up front and the TPMS repeater which I plan to mount in the rear TV cabinet.)

We got back around noon and I spent the next couple of hours straightening up the inside of the bus and packing everything that was going home with me.  Around 2:45 PM I finished packing the stuff I had in the guest bedroom and began loading the car.  I wrote up a list of things we owed each other money for and, as I expected, I owed Butch more than he owed me.  (He tends to order things we need on his accounts and I pay him back.)  I bought a Variac from him, added it to the list, and put it in the car.  Fonda has been working on a wedding dress for their daughter Gene for quite some time and was done except for some trim, so I got to see it before I left, which I did at 3:15 PM.  It was very nice.

I had located a Verizon corporate store on US-33 just south of US-20 which was on my normal route home.  I arrived at that intersection around 4:45 PM and first stopped at the Burger King next door for some French Fries.  The Verizon sales associate, Hector, claimed to know nothing about the double data promotion and insisted there was no such thing available.  I called Linda from their parking lot and we discussed what to do as today was the last day for the promotion.  She had checked our account online last night, and although we could change our monthly data allowance online (for a price, of course) there was no information about the promotion available there either.  Very strange considering how much this has been in the media all month.

Linda was stuck in traffic coming home from the bakery so we chatted while I made my way over US-20 to CR-17 (IN) to I-80/90 (Indiana Tollroad) to the I-69 exit where I had to pay my toll.  Traffic on her end had also loosened up by then so we ended our call.

My entire trip home was in some form of precipitation; mostly rain but occasionally sleet or snow, with very strong and gusty winds from the north that made for somewhat more difficult driving.  It also made it difficult to judge the effect of the adjusted tire pressures on handling although the shimmy seemed to be gone.  I stopped at the Michigan Welcome Center on I-69 and unpacked some of the food I had with me.  I stopped again at M-60 for coffee at McDonald’s and fuel at the TA/Shell station where Regular gasoline was $2.929.  It’s been a long time since we have seen gasoline prices below $3/gallon.  That was my last stop before arriving home at 8:45 PM.  The last few miles were through moderate snow and the strong winds had coated the north facing side of trees and road signs.

Linda helped me unload the car and get everything into the house.  I gave Butch a call to let him know I had arrived home safely and we chatted briefly about bus projects.  I took a shower and went to bed where I finished this post before 11 PM and went to sleep.

2024/11/01 (S) Words

Although we were both very tired we did not sleep well last night.  We awoke early to find a thin covering of snow on our rear deck and over parts of our yard with the temperature in the upper 20s.  We went to our SLAARC ham radio club breakfast this morning anyway, the first time in several weeks for Linda, and there was a good turnout.  Those members who came from east or south of us did not have snow on the ground.

When we got back to our house Linda worked at her desk on our personal finances while I worked at the dining room table on e-mail, websites, and bus project documentation.  Our son and daughter-in-law showed up around 3:30 PM with their daughter.  They had a baby shower to attend in Detroit and Madeline was spending the night with us.

Linda had given me the heads up that Madeline’s vocabulary had increased significantly since I last saw her and that certainly proved to be the case.  She finally had understandable words for many things including the counting words from one to ten.  She is now 22-1/2 months old and is a very active and busy little girl.  We played with lots of different toys, including a new little Thomas The Train locomotive that Grandma Linda bought for her.

We had dinner between 6 and 6:30 PM.  Madeline had mock chicken tenders with broccoli, cauliflower, mandarin orange segments and sliced strawberries.  Linda and I had yummy homemade chili that she had been cooking in the crockpot most of the day.  I played with Madeline after dinner while Linda cleaned up the dishes and then joined the fun.  Nighty-night is her current pre-bedtime game, but by 7:15 PM she was tired enough let Linda get her into her pajamas and then sit quietly while I read a couple of story books to her.  As always, she went to bed without a fuss.

Once Madeline was asleep Linda read and played online word games with friends and relatives and I continued working on my bus projects list, light bulb inventory, and reconciliation of purchases that Butch and I have made for each other.  By 10:45 PM I was tired and ready to do something else so I climbed in bed and worked on this post.

2014/11/02 (N) An Extra Hour

At 2 AM EDT this morning it was suddenly 1 AM EST so when Linda got Madeline out of her porta-crib at 8 AM, according to the clocks in our house, it was officially 7 AM.  We all slept well last night and Madeline woke up well rested and in a pleasant mood.  She enjoys her meals so before any playtime we had breakfast of toast and juice and fresh fruit.  Brendan called around 9 AM to see if we could keep her until after her afternoon nap as he and Shawna had professional work they needed to concentrate on.  I suggested they come for an early dinner and they agreed.  Linda checked her ingredients on hand and then agreed to make her seitan stroganoff served over rice.  This is one of my favorite vegan dishes and a standard ‘go to’ when we are having non-vegan company for dinner.

You cannot have too many bows in your hair, apparently.

You cannot have too many bows in your hair, apparently.

We played with Madeline all morning and she was a very busy girl.  She has understandable words for a few things and a much richer, if somewhat secret, vocabulary that she takes great delight in using.  She knows the names of her basic colors and has started to get the idea of counting.  She enjoys building tall structures with her Lego blocks and is still fascinated with the organ.  Running around the island in our kitchen is another favorite activity; sometimes chasing, sometimes being chased, and sometimes holding someone’s finger.

I got a TXT message from Chuck asking if I was back in town and had time to talk.  Linda let me take a break from playing with Madeline so I could call him back.  He has been working on their bus and wanted to bring me up to date on his projects and get caught up on my projects and timeline.

Our other grand-daughter, Katie, is up in the U. P. with Chris (her dad) and Meghan (our daughter) visiting Northern Michigan University in Marquette.  They visited the Pictured Rocks National Lakeshore yesterday and made it out to Castle Rock.  This evening they had a banquet to attend and tomorrow she has an interview for a scholarship.  Katie is interested in animals and wants to study zoology.  NMU is one of the few universities that offer a true zoology major rather than a biology major with an emphasis in zoology.  It may sound like a distinction without a difference, but it is an important distinction to Katie.  Katie is a serious young lady who has done well in school and will certainly represent herself as such during the interview.  We are excited for her and hope she is successful in obtaining this merit-based financial support.

By 11:30 AM we were anticipating lunch and Madeline requested pizza.  We happened to have an Amy’s Roasted Vegetable pizza in the freezer (our favorite) so Linda preheated the oven and baked it on our pizza stone.  We sat down at noon and enjoyed our pizza accompanied by seedless red grapes.  We were all full by 12:30 and Madeline was showing signs of being ready for her nap so Linda helped her wash her hands and face and then got her settled in her porta-crib.  Madeline enjoys sleeping almost as much as eating and went to bed without any fuss.

The cats, who had retreated to the basement this morning as soon as they heard/saw Madeline, are keenly aware of when she is eating and sleeping.  Once we have her in her high chair at the table we usually open the safety gate at the top of the basement stairs so they can come up.  Both of them did and walked around under the dining room table, apparently aware that she was not mobile.  They eventually went back downstairs but came back up once she was asleep.  We decided to leave the door to the middle/blue bedroom open about six inches to see what the cats might do.  Jasper immediately turned around and went back downstairs but Juniper stuck her head in the room, probably got sensory overload, and also left.

Linda needed a few grocery items and went to Meijer’s in Brighton where she topped up her gas tank for $2.919 a gallon.  If only the price of diesel fuel would pull back to corresponding levels.  It has dropped but not by the same amount.  I stayed home and worked on my bus projects spreadsheet.  When Linda got back with batteries I changed all of the clock batteries and reset the time.

Brendan and Shawna arrived at 3 PM just as Madeline was waking up from her nap.  She was thrilled to see her parents, of course, as they were thrilled to see her.  It was a beautiful, if somewhat chilly, day and they got her coat, hat, and mittens on and played in the yard while Linda started preparing dinner while I cleared the table of my computer and papers and set it for the meal.  We sat down to eat at 4:15 PM and started with a nice salad of chopped greens and cabbage, an Asian dressing, and crispy Asian noodles.  The main course was the seitan stroganoff served over white rice and accompanied by roasted Brussels sprouts and a sliced multi-grain baguette.  The adults had a small glass of the Leelanau Cellars Witch’s Brew, a seasonal mulled (spiced) red wine.

After dinner Brendan and Shawna began the process of getting ready to leave which includes delay tactics on Madeline’s part and their response to them which is always gentle but persistent.  They were out the door at 5:30 PM and by 6 PM we had cleared the table, rinsed the dishes, loaded the dishwasher, and picked up the few toys that were left out in the living room.  Although the clock said 6 it felt like 7.  As hard and as long as I have been working on bus projects, I am surprisingly tired after spending a whole day with Madeline.  I opened the safety gate and Jasper came upstairs right away, eager for our company and attention.  He curled up in my lap while I worked on this post.

We watched Inspector Lewis (streamed), the first TV program I have watched in quite some time.  Part of the PBS Masterpiece Mystery series, it is a really excellent production.  I did some online research on 2m/70cm ham radio antennas and dual (co-phased) CB antennas but did not come to any conclusions about what to get.  The problem remains the same; I cannot put anything tall on the roof of the bus and even if I wanted to I have little-to-no access to the underside of most of the roof.  The fact that the lower roof sections in the front and rear are part of the front and rear fiberglass caps just complicates matters even more as they do not provide a conductive path or ground plane.

 

2014/10/23-29 The Bus Work Continues

2014/10/23 (R) Close Encounter of the 1st Kind

My two main bus projects today were the lighted handle by the entrance door and the Progressive Industries remote display installation.  The lighted handle needed new machine screws and some additional gasketing on the upper securement.  It turned out that all five of the screws that I removed were stripped to a greater or lesser extent.  After trying several different screws I concluded that the threaded holes must be messed up.  Butch loaned me a 10-24 tap and I used it to re-tap all five of the mounting holes.  I cut two additional pieces of the vinyl shower pan liner and trimmed them to fit just inside the upper securement.  That allowed the piece to be reattached to the body using the 10-24 stainless steel screws I bought last night without causing interference with the LED bulb.

Some time ago I bought a remote display kit for our Progressive Industries Energy Management System (EMS).  The kit consists of a second display unit and a selector switch unit.  I mounted the selector switch in the utility bay in place of the display unit, moved the display unit to the left, and connected it to the switch with the short cable provided in the kit.  I routed the long cable from the switch through the bay to the other side by the Aqua-Hot and fed it through a small hole into the electrical bay, which is the next bay going towards the front of the coach.  I temporarily mounted the remote display in the house panel.  I then repeated the work I had done yesterday to relocate the Magnum inverter/charger remote.  This time I used serial cable #1, removed the DB-9 connectors from each end, and connected the wires on each end.  The difference from yesterday is that Progressive Industries wires their cables so that pin 1 of the RJ-11 on one end is wired to pin 1 of the RJ-11 on the other end.  That meant I had to keep the wire colors the same between the two surface-mount phone jacks, i.e., black-to-black, red-to-red, green-to-green, and yellow-to-yellow, rather than cross wiring them like I did yesterday.

ITR Oasis Combi in Butch & Fonda's MC-9.

ITR Oasis Combi in Butch & Fonda’s MC-9.

Butch’s major focus today was the ITR Oasis Combi.  He and Fonda worked for much of the day running new diesel fuel lines.  By late afternoon I was done with my projects and went to work on the fresh water plumbing for the Oasis.  Prior to the last couple of weeks I had not worked with PEX tubing and fittings.  Butch has a crimper that he showed me how to use.  By the time we quit working to have dinner we had the fresh water tank connected to the inlet of the Shur-Flo 4048 pump, the outlet of the pump connected to T-fitting that supplies cold water to the house and to the Oasis Combi inlet, and the outlet of the Combi connected to the line that supplies hot water to the house.

For dinner I fixed a salad, a Thai Kitchen mushroom noodle soup bowl, and a bowl of fresh strawberries for dessert.  I took everything in the house and dined with Butch and Fonda.  After dinner I went back to the coach to try and straighten things up a bit.  I must have opened the cabinet door under the kitchen sink a dozen times to throw away food scraps, product packaging, and paper towels.  I had bundled up the various recyclables and opened the cabinet to remove the trash bag when the mouse jumped out and ran under the passenger side couch.

I say THE mouse because I presume it is the mouse that has obviously been in the coach recently based first on getting into my loaf of bread and then finding a nest where none had been previously.  It was a cute little dark gray field mouse, not more than two inches long (without its tail), but I am going to have to find a way to catch it and remove it.  I will set a live (no kill) trap next week and see if I can find it a nice field to live in somewhere far away from Butch and Fonda’s house and both of our buses.

It was still in the upper 40s and rather pleasant outside so I straightened up the back of my car rather than wait until morning.  After retiring to the guest bedroom I organized most of my clothes.  I should be packed and on the road about an hour after I get out of bed in the morning.

2014/10/24 (F) Around the World in 80 Days

As much as I have been traveling back and forth between Michigan and Indiana I feel as if I could circumnavigate the world in 80 days but today my “journey of a thousand miles” began with a 260 mile trip home.  I was up a little before 8 AM and finished packing all of my stuff in the guest bedroom and loading it into the car.  I gathered up some last minute laundry, foodstuffs, and recyclables and put those in the car as well.  I sat and chatted with Butch and Fonda until 9:10 AM and then said farewell until Sunday evening.  I pulled my car out its normal parking spot at 9:15 AM and headed east on SR-16.  I followed my usual route home from there: US-31 north to US-20 east to CR-17 north to I-80/90 (Indiana Tollroad) east to I-69 north to I-96 east to M-59 east to Hacker Road south and then home.

Hand cut gaskets for upper piece of lighted entrance handle on our coach.

Hand cut gaskets for upper piece of lighted entrance handle on our coach.

Our friend Kate had contacted us yesterday to see if we were available to go to the Meadow Brook Theater to see a live theatrical performance of an adaption of Jules Vern’s Around the World in Eighty Days.  Her cousin is working as an intern at the theater this season and was able to get courtesy tickets.  Linda was feeling well enough to go so we left early and stopped at a Panera on the way over to the theater where we met up with Kate.  The performance was very good and we thoroughly enjoyed it.  We wanted to have coffee together afterwards, but by the time we met her cousin and chatted for a while it was late and everything was closed.  Besides, we had an hour’s drive to get home and Kate probably had at least 90 minutes.

2014/10/25 (S) Here And There

Linda slept in to rest and try to recover from her cold so I went to the SLAARC Ham Radio Club Breakfast by myself.  She was awake by the time I got back and feeling well enough to run errands with me.  We stopped at Recycle Livingston and then picked up our new natural gas fireplace logs from Country Squire in Howell.  We got the business card of the independent technician who does installations for them and gave them a call to set up an appointment.  I left a message and they called us back later.  We stopped at our Bank of America branch enroute to Staples in Brighton in search of a larger size of graph paper, but they did not have the size I wanted.  I need larger paper to draw accurate designs for the custom desk/pantry and printer stand/table that we want to have made for our converted bus.  We fueled up at the Brighton Meijer’s and then bought groceries.  We needed a new coffee maker but decided not to purchase one until we had checked online.

Back home we searched for coffee makers in a white finish rather than black/stainless.  There were only a few choices and one of them was a Mr. Coffee programmable model that was available at Bed, Bath, and Beyond.  As long as we were looking for things online we found a pad of 50 sheets of 17″x22″ graph paper with a 1/4″ grid pattern and added that to our Amazon Prime shopping cart.  We also added a Camco RhinoFLEX RV sewer hose kit and various accessories.

Back side of house systems panel.  Bus conversions are complex.

Back side of house systems panel. Bus conversions are complex.

Linda had arranged for us to meet John and Diane at Camellia’s in Farmington Hills for dinner at 6 PM.  We left the house around 4 PM and stopped at the Brighton Bed, Bath, and Beyond to get the Mr. Coffee coffee maker.  We stopped at the Meijer’s in Wixom and picked up the filters and then stopped at J. C. Penney’s at Twelve Oaks Mall for some necessary clothing items.  We headed into Farmington Hills but were still early for dinner so we drove through our old neighborhood, which is very close to the restaurant.  Our former across-the-street neighbor, Dan, was working on a car in his driveway so we stopped to chat.  While we were there the young man who bought our house arrived home on his motorcycle.  He never removed his helmet before putting the bike in the garage and shutting the door, so we never actually saw him.  Our daughter handled the closing in July 2013 since we were in Wyoming at the time, so we never meet the buyer or his parents.  He has apparently been a very quiet neighbor who keeps to himself.

We got to the restaurant shortly after 6 PM and John and Diane were already seated so we did not have to wait for a table.  We had the veggie fajitas, our standard choice at this particular Mexican restaurant.  While we were dining our friends, Jim and Kristine Gullen, came in and sat in a booth near us.  When we were done with dinner John and Diane headed to their house (nearby) and we lingered for a few minutes to chat with Jim and Kristine before joining them.  Diane had bought some Coconut Bliss Chocolate with Salted Caramel non-dairy “ice cream.”  It was the best vegan ice cream we have had.  By 10 PM we were all having trouble staying awake so we said farewell and headed for home and went quickly to bed.

2014/10/26 (N) Pack and Go

We both slept in this morning, the combined effect of being tired (both of us), sick (Linda), and having taken Tylenol PM last night (both of us, again).  In spite of her cold, Linda wanted to cook something for me before I took off again for Indiana, so she made her wonderful vegan blueberry pancakes for breakfast.  We used the new coffee maker and, as expected, the coffee tasted the same as with the old one.

After breakfast we sorted and folded laundry (we have such exciting lives) and I selected and packed the items I needed for the week ahead.  I had not copied photos from my laptop to the network drives since October 10th so I took care of that.  I also made more careful measurements of the dimensions of our color laser printer to use in refining the design of the printer cabinet for the bus.  Likewise, I took measurements of our Dewalt air compressor as I plan to build a wooden divider for the back of the Honda Element that will secure it on the floor and create space next to it and above it for storing other things.  Obviously the two rear seats will be removed when this insert is in use.

Junction boxes for the ME-ARC remote (bottom) and the PI-EMS-50 (top)in the house systems panel.

Junction boxes for the ME-ARC remote (bottom) and the PI-EMS-50 (top)in the house systems panel.

By 2 PM I was ready to load the car so Linda helped me with that task.  I pulled out of the driveway at 2:16 PM and followed my usual route to Indiana: Hacker Road north to M-59 west to I-96 west to Lansing Road south to I-69 south to I-80/90 (Indiana Tollroad) to CR-17 south to US-20 west to US-31 south.  I exited US-31 at IN-25 (Rochester), topped off my fuel tank and then picked up fresh greens and fruit at the Kroger.  I headed south on IN-25 to Fulton where I took Aitken Road east to Meridian then headed south to SR-16 and finally headed east to Twelve Mile.

Butch and Fonda had their family holiday gathering today.  They had 27 family members in attendance during the day and for dinner but by the time I arrived (7:45 PM) everyone had left except Brittiny and Rock, and they departed while I was unpacking food and storing it in the coach.  I moved all of my clothes and technology into the guest bedroom, like I always do, and then visited with Butch and Fonda for a while before retiring to my room for the evening.  If the weather forecast holds true we have two unseasonably nice days in store on Monday and Tuesday and the rest of the week doesn’t look too bad either. We have a lot to do and could use some favorable weather.

2014/10/27 (M) Heat and Light

We had an unseasonably nice day for working outside.  It was already in the upper 40s when we got up and made it in to the 70s under partly cloudy skies with breezes from the southwest.  I was up before 8 AM and had my usual granola, orange juice, and coffee for breakfast and then got to work.

Butch worked most of the day on assembling the two fan-coil heat exchanger units that will get plumbed into their ITR Oasis Combi diesel-fired hydronic furnace to provide heat to the house portion of their converted bus.  While he worked on that I worked on replacing our patio light.  The ballast on the old one was no longer working and the way the unit was designed it could not be replaced.  Butch happened to have an identical unit, so I used it as the replacement.

Old patio light fixture after being removed from the side of the coach.  Not pretty.

Old patio light fixture after being removed from the side of the coach. Not pretty.

The old unit was not removed from the coach when it was painted.  This was a nice idea at the time as it provided a paint seal on the top and both sides where the unit met the side wall of the bus.  Unfortunately, removing the unit required me to cut the paint seal with a very sharp knife.  The unit was secured with two screws, but it was stuck to the side of the coach with a generous amount of automotive putty.  Most of it came off with the fixture, but not all, so after I cut the two wires and removed the fixture I had to carefully scrape the rest of it off using the thin end of a wood shim.

I checked the voltage at the two wires coming out of the wall and I definitely had 13 VDC controlled by the same switch that turns the lighted entrance handle on and off.  I prepared the back of the new fixture using new automotive putty to create a seal all the way around the back at the outside edges.  I also placed a ring of putty around each of the screw holes in the back and the access hole for the wires.  I attached shielded spade lug disconnects to all four wires, held the fixture in place, and connected them.  I pressed the fixture into position, lined up the screw holes, and secured it.  I put the two F8T5 florescent tubes back in, snapped the cover back in place, and made sure the on/off pushbutton switch on the bottom was in the on position.  I then applied a bead of NAPA RTV Black Silicon Rubber sealant along the top seam and the two sides.  (Sorry Michele, but I had to make sure it was not going to leak.)

The switch that controls this light is one of three in a 3-gang box next to the passenger seat and is the one closest to the entrance door.  I had removed the cover plates last week so today I took another look and it appeared that the other two switches did not have any wires connected to them.  I removed them and that was indeed the case.  I think tomorrow I will re-wire this so the first switch controls only the lighted entrance handle and the second switch controls only the patio light.  If I cannot figure out something to control with the third switch I will probably leave it out and get a new cover plate that has two switch openings and a blank, assuming I can find one.

With the patio light project done Fonda helped me remove the fan belt and the two A-C compressor drive belts from the engine in our bus.  We put the two compressor drive belts (NAPA CG-96) back on but reversed their position.  The inside one seemed loose compared to the outside one last week and we wanted to see if switching them would fix that problem.  We then installed the new fan belt that I ordered/received last week.

I started the main engine and let it run for a while on high idle with the air-conditioning turned on to put some load on it.  The CG-96 that was now on the outside of the pulley still appeared to be looser than the other one, so I think I will order a replacement set.  The new fan belt ran very smoothly.  I turned the A-C off, dropped the idle down, and shut off the engine.  I started to close the rear access hatch but found that it was stiff and made a sound like an elephant trumpeting.  I sprayed some WD-40 on all the hinges and on the piston rods for the air springs.  I then put a small amount of NAPA Syl-Glide on the piston rods, worked them up and down a few times, and wiped off any excess.  The hatch now opens and closes smoothly and quietly with less effort.

Butch pressure washing the radiators for his fan coil heat exchangers.  MC-9 (L) and H3-40 (R).

Butch pressure washing the radiators for his fan coil heat exchangers. MC-9 (L) and H3-40 (R).

While I was lubricating the hatch Butch was using a pressure washer to clean the radiators (heat exchangers) for their fan-coil units.  As long as he had it out, he sprayed around all of our front windshield seals while I looked for leaks inside.  We found three for sure.  One was in the upper inside corner of the lower driver-side windshield between the center pillar and the seal.  The second one was in the lower outside corner of the upper driver-side windshield between the seal and the glass.  We were not able to identify the point(s) of entry for the third one but it appeared to be somewhere above the upper windshields near the center pillar, a least that was where the water was coming in on the inside.  I cannot see the underside of the front cowling in that area and there are lots of places water could come in: five front marker lights, two upper windshield mounts, and perhaps a dozen screws on top of the front roof holding various things down.

Leaks are annoying and potentially destructive so I am still pondering what I want to do.  We have new windshield seals but have had trouble finding someone locally to install them.  For one thing, the bus really needs to be inside for that work and most glass shops, including ones that work on “semi tractors,” do not have overhead doors high enough for the bus.  I may make judicious use of the NAPA RTV Silicone Rubber sealant or I may just use black tape as a temporary fix.

When we were done checking the windshields I used the pressure washer to clean off the coach as best I could.  The last time it was cleaned was right before we left Williston Crossings RV Resort in early April and it had accumulated a few miles, bugs, and dirt in that time.

Because the weather was so nice Butch decided to replace a short section of badly deteriorated coolant hose on their engine rather than risk having it fail on the road.  He shut some valves to isolate the engine from the coolant lines that provide heat to the coach and drained quite a few gallons out of the engine (almost three 5-gallon buckets).  The old hose turned out to be extraordinarily difficult to remove. The new piece was no easier to get in and required modification of two parts.  This was definitely not a job you want to do on the side of the road in any kind of weather.

While Butch and Fonda worked on the coolant hose I tinkered in the dashboard area of my bus.  First I replaced a couple more bulbs in illuminated switches.  I then pulled the CB radio out of the dash to see how the coaxial cable (transmission line) was marked.  That allowed me to identify the other end in the old ceiling-mounted TV cabinet behind the driver’s seat.  I also looked around in that cabinet for the other end of the coaxial cable that was once connected to the antenna for in-dash AM/FM radio/cassette/CD player.  I did not see anything that looked right, so I pulled the radio out of the dash (actually the whole panel along with four switches) to get the identifying marks off of it. Even with that information I was not able to locate the other end of the cable.

Working on the bus and living in the bus are often not compatible.

Working on the bus and living in the bus are often not compatible.

By that point it was 6 PM and we had weather approaching from the southwest.  Clouds had moved in, greatly reducing our natural light, and gave the first indications of the rain that was forecast for the evening hours.  I will look again for the radio antenna cable tomorrow as I have a TuneTrapper antenna that I want to install on the underside of the front roof via the old TV cabinet and I need to plug it into the cable that goes to the radio.

I had a small glass of Moscato while I prepared my dinner.  I fixed a salad of power greens with peanuts, dried cranberries, and fresh diced onions and finished a bottle of Ken’s Sweet Vidalia Onion dressing.  I grabbed a can of Amy’s “No Chicken Noodle” soup, some crackers, my jar of peanut butter, and some ICE brand water and went inside to eat with Butch and Fonda.  I returned to the coach after dinner, cleaned up my dishes from the day, and bagged up my recyclables.  We bought a small container on Saturday that is intended for storing pet food but it has a gasketed lid with a snap latch that I thought would make a nice mouse-proof kitchen trash can.  (I figure the mouse will leave if it cannot get any food.)  Alas, the container does not fit in the base cabinet under the kitchen sink so it will likely end up being used for its intended purpose after all.

2014/10/28 (T) Under the Bus

In corporate life “getting thrown under the bus” is not a good thing, but if you are the owner/builder/maintainer of a converted highway coach, getting under the bus will eventually be a necessity.  Today was finally my day, but not until mid-afternoon.

The forecast for today was for rain in the morning tapering off to zero by noon and then turning sunny; and that is exactly the day we had.  Knowing that the morning would be wet, I took a couple of Tylenol PM last night and slept in a bit later than normal.  After my usual breakfast of granola, orange juice, and coffee, with some spicy V8 thrown in for good measure, I set to work on the interior of the old TV cabinet located above and behind the driver’s seat.

Yesterday I pulled the CB radio and the AM/FM radio out of the dashboard and identified how the coaxial antenna cable for each one was marked.  I located the cable for the CB in the TV cabinet but was not able to find the one for the AM/FM radio.  I got my twin tube florescent worklight and rigged up a couple of zip ties with mounting tabs to hang it from.  I looked again this morning but still could not locate the AM/FM radio antenna cable.  Rather than waste time not finding it I decided to organize the inside of the cabinet which has had an outlet strip, an OTA TV antenna controller, the Wi-Fi Ranger POE adapter, DC power supplies, and a mess of cable that has been lying around in it for a couple of years now.

Using the tab mount zip ties I coiled each cable and secured it to one of the two side walls.  The OTA TV antenna cable (signal and control) was very long, so I wound it around a 5-gallon plastic bucket to make a nice round, large coil.  The outlet strip had mounting slots on the back, so I mounted it to the wall on the lower half of the back of the cabinet.  The upper half of the back is open to the area above the driver and entrance stairs and under the front cap of the roof.

Late in the morning I took a break from the TV cabinet work and helped Butch cut access panels out of a 1/8″ aluminum sheet that will cover the inside of their entrance door.  We tried using a sabre saw but the only blade we had was not sharp enough or was the wrong type.  We used his Ryobi cordless reciprocating saw with a metal cutting blade and it made much quicker, and surprisingly clean, cuts.  I then used Butch’s angle grinder to round the corners of the sheet and remove burrs from all of the cut edges.

I stopped for lunch around 2 PM and enjoyed a hummus and onion sandwich.  By the time I was done the day was as warm and sunny as it was going to get so I decided to scoot under the bus and measure the ride height linkages.  This was the first time I have been under the bus.  Please note that the bus was supported on four stands that Butch made for me out of 1/2″ steel plate and 4″ square steel tube with 1/2″ thick walls.  In other words, the bus was not supported by the tires and air springs so the bus would not move if there was a failure in one of those components.

H3-40 front axle ride height valve and linkage.

H3-40 front axle ride height valve and linkage.

The linkage in the front was easy as I could slide under the bus just in front of the driver side steer tire and then sit up between the front tires with lots of room to work.  The linkage is directly above the center of the front axle and connects the axle to a lever arm on an air valve that determines the amount of air that goes into the front airbags (when in drive mode), and thus sets the suspension at “ride height.”  Butch wanted me to remove the linkage but I chose not to.  As it turned out I should have and will probably slide back under the front tomorrow and remove it.

The rear linkages were much more difficult.  First of all, there are two on them, one for each end of the drive axle.  They are located just inside the body panel directly in front of the outside dual drive tire and are covered by a protective shield.  The shields are bolted on at four points, none of which are easy to reach and one of which ultimately required me to get under the rear end of the bus.  Access is much tighter here because of:  1) The dual drive tires on each end of the drive axle; 2) The drive axle carrier, and; 3) The exhaust pipe for the Aqua-Hot which runs under the bus from the passenger side to the driver side where it ends up next to the exhaust pipe from the generator.  I was able to scoot under the bus from the passenger side just in front of the drive tires, but just barely, and once I was under far enough to sit up there was much less room to work compared to the front.  Because of the difficulty of getting to the linkages to make an accurate measurement of the center-to-center distance between the mounting bolts I went ahead and unbolted them and removed them.

The linkages consist of a length of metal rod approximately 1/4” in diameter with a rubber bushing on each end that looks a bit like and eye-bolt.  The rubber bushings slip over the ends of the metal rods and are secured with band clamps.  They appear surprisingly fragile given the critical nature of their function, and Butch has already had one that was only a couple of year’s old break on their coach.  He ordered metal versions in both left-hand and right-hand threads and is going to assemble replacements using threaded rod and stop nuts.  With a left-hand threaded bushing on one end and a right-hand threaded bushing on the other end we will be able to turn the threaded rod one way to increase the distance between the two mounting bolts and the other way to shorten it, affecting both ends equally in the process.  The stop nuts will lock the bushings relative to the threaded rod so they do not move in operation.  All-in-all this will be a neat little project.

In spite of the lovely weather Butch needed to get to the NAPA store in Logansport before they closed at 5:30 PM.  At 4:30 PM I wrapped up my work with the linkages, put all of my tools away, washed up, and grabbed my wallet, cell phone, and shopping list.  We got to the NAPA store a little after 5 PM and took care of our business there.  We then headed to the O’Reilly’s Auto Parts store for a few other things.  I called Linda and chatted briefly with her and was relieved to hear that she sounded, and was feeling, considerably better.  Butch called Jaral Beatty to see if he had finished cutting the oak valences for the front of their bus.  He had, so we swung by Jaral’s shop to pick them up.

Front flat-panel TV/monitor with cabinet door closed.  Look ma, no wires!

Front flat-panel TV/monitor with cabinet door closed. Look ma, no wires!

While we were at Jaral’s he ripped a nice piece of 3/4″ thick oak for me to just under 3″ wide.  The piece was about 4′ long and he did not charge me for it.  I plan to attach this piece of wood to the center windshield pillar and use it as a mounting plate for a compass, flat panel monitor, PressurePro TPMS receiver, and the mirror that is currently mounted at the intersection of the four windshields.  I have to do this, of course, in such a way that it does not obscure my vision while driving.  From Jaral’s shop we went to Home Depot where I bought a thin (1″ thick), 13″ long, under-cabinet, single-tube florescent, AC powered light fixture.  I also got a blade for my Porter-Cable oscillating saw.

When we got back to Twelve Mile a little after 7 PM Fonda started preparing their dinner and I did the same.  I had a nice salad of power greens with onions, dried cranberries, and roasted peanuts topped with a sweet and sour dressing.  I also had a bowl of Thai Kitchen spring onion soup, some canned pears, and half a piece of pita pocket bread.  After dinner I washed my recyclable containers and went back to the coach for a while where I cleaned and dried a few utensils.  I then mounted the new light fixture in the TV cabinet.  As I expected, it provides very nice illumination for the entire inside of the cabinet.

Depending how the day goes tomorrow I plan to continue working in the front TV cabinet.  I would like to mount the TuneTrapper AM/FM antenna and get it connected to the AM/FM radio.  Butch’s brother, Tom, is coming over sometime during the day to winterize his motorhome.  Butch called and asked him to bring the faceplate from an old Kenwood radio that he had that was very similar to the one in our dashboard.  The backlight illumination bulb is burned out on ours.  I also need to create an access slot in the door for cables to pass between the back of the flat panel TV (which is mounted to the outside of the door) and the inside of the cabinet.  To create this access slot I will have to drill holes centered along a line and then use Butch’s root-zip tool to connect the holes into a slot.  The bushings for the ride height linkages are supposed to be in tomorrow, so we will be making a morning trip towards Kokomo to pick them up.  Butch is also trying to tap into the engine coolant loop that provides OTR heat for their bus as part of the Oasis Combi installation, so it is likely to be a very full day.

2014/10/29 (W) Outside In

My main project today was once again the front TV cabinet only this time the focus was on cutting a horizontal opening in the door behind the flat panel TV that is mounted on the outside of the door.  The approach I used was to drill two 1″ holes, one at either end of a horizontal line, and then use a roto-zip tool as a mini-router to connect the tops of the holes together and the bottoms of the holes together, creating a horizontal slot with rounded ends.  The slot is below the horizontal center line of the TV set and offset to the left (as viewed from the front of the TV) to line up with the area on the back of the set where the power, video, and data cables exit downward.  The position of the slot allows them to gently bend and pass from the outside of the cabinet to the inside of the cabinet where they get connected.  This also allows the cabinet door to be closed and latched with none of the cables visible.  It sounds simple but it took me a good part of the day to get it done.  We have a second flat panel TV in the bedroom mounted on a similar door that covers another old TV cabinet.  Cutting a similar slot in that door is on my task list for tomorrow.

Front TV cabinet; making use of the space where the 10" CRT was mounted.

Front TV cabinet; making use of the space where the 10″ CRT was mounted.

When I wasn’t working on the TV cabinet I spent a few minutes learning how to use an air-powered cutoff tool and giving Butch a break by using it to help cut off a piece of the center tunnel sidewall in their passenger side front bay.  Butch is removing this panel in order to gain access to the engine coolant lines that provide heat for the bus when it is underway.  He needs to tie a stacked-plate heat exchanger into these lines as part of the ITR Oasis Combi hydronic heating system installation.

Butch spent most of his day working on their Suburban installing a Ready-Brake auxiliary braking system and extra rear lights for towing.  I checked in with him from time to time, but he was either in the middle of one-person tasks or had Fonda helping him.  Late in the afternoon we rolled his Ryobi belt sander out of the warehouse and used it to sand his two valence boards and my piece of oak that we picked up yesterday from Jarel.  We had to change the sanding belt and it took us a few tries to get it right, but it did a nice job on the boards once we had a good piece of sandpaper on it.

By the time we finished it was twilight and very cool.  Tom and Tracy showed up about then to winterize their motorhome.  There was a locked cover over the fresh water fill connector and none of Tom’s keys would open it.  I got a long flat-blade screwdriver and was able to slip it up under the cover and pop the lock.  I left the winterizing to Butch and Tom and retreated to my coach to putter and contemplate (and eat) at a lovely 67 degrees F.  The Aqua-Hot has been working very reliably, cycling on and off automatically in response to the space and water heating demands of the coach.

Tom brought an old Kenwood car stereo that he got from Butch a while back.  Although similar in appearance to our Kenwood dashboard radio, it was not similar enough.  The electrical connector on the back of the removable faceplate was in a different location than ours.  I had a Singapore Noodles dish in the coach and then made a salad to take into the house and dine with Butch and Fonda.  It was after 9 PM by the time we were done eating and I turned in for the night shortly thereafter.

 

2014/09/27 (S) Eat Cut Eat

Today was VE testing day for our South Lyon Area Amateur Radio Club so some of the members, who conduct the volunteer examinations, got to breakfast even earlier than usual.  We had a good crowd and many simultaneous conversations.  After breakfast we drove to Ann Arbor to return the charger for the baby monitor.  It got left at our house yesterday when Linda took Madeline home.  Madeline was dressed in her Michigan colors with a blue T-shirt and maize skirt.  She gave me a tour of her backyard and toys and then we all went inside to visit for a while.  Linda and I each got to read a book to her which is always a treat for us.  We all had things to do, and we wanted to get out of town before the football game traffic clogged the streets, so we headed home before lunchtime.

Back at the house Linda straightened up and vacuumed, put together a grocery list, and then went to Meijer’s (grocery store) while I finished cutting the grass around the house.  It took me a couple of more hours, but between yesterday and today I managed to cut all of the newly planted grass and some of the more mature grass close to the house.

It was another pleasantly warm late September day and I used that as an opportunity to start the main engine on the bus.  I let it run for a while with the over-the-road air-conditioning turned on to put a load on it and bring it up to operating temperature, which helps drive off moisture.  Linda got home with groceries while the bus was running and I helped her get those into the house.

I let the bus run on high idle for about 30 minutes with the over-the-road air-conditioning on, which brought the coolant temperature up to its normal operating level.  The oil also warmed up, but not fully.  Before shutting the engine off I backed the bus up about 5 feet to rotate the tires to a different spot.  I turned the a-c off, dropped the idle to low, and let it run another 5 minutes, during which time I drained the auxiliary air tank.  I then switched the suspension system from ride mode to Level Low mode and turned off the engine.  As usual, I turned off the chassis batteries, shut off the auxiliary air to the air-powered engine accessories, and closed the shutoff valves for all of the air accessory circuits in the bay under the driver’s seat, except the circuit for the toilet.  (Yes, the bus has an air-powered toilet.)

I put a load of laundry in the washer and then spent some time at my desk checking e-mail and websites.  I had an e-mail from Gary regarding an article in the upcoming September 2014 issue of Bus Conversion Magazine.  They decided to run my article on the Parker FPM-50 Fuel Polishing Module project and wanted me to proofread it and respond to a few suggested markups.  I worked long enough for the washer to finish, moved the laundry to the dryer, and then shaved and took a shower.  By the time Linda finished her shower my hair was dry enough to cut, which it really needed.  We then got dressed to go out to dinner.  I checked the dryer but it was taking longer than I expected and clearly would not be done before we had to leave for the restaurant.

We had arranged at breakfast to meet Bruce (W8RA) and Linda (NF8C) Whitney for dinner at LaMarsa in Brighton at 6:30 PM.  Bruce and I both had mango smoothies (dairy free) and we got a veggie tray with hummus to share as an appetizer.  Although two dishes would have been plenty of food for the four of us, Linda (NF8C) wanted to sample their offerings.  There are basically four dishes on the menu we can eat so we ordered one of each.  Each came with soup so we all had the crushed lentil soup.  We had Koshary, Majadra, Ghallaba (garlic almond) and Mousaka (baked eggplant).  (We did not get the spicy version of any of these.)  It took the waitress a while to catch on to the fact that we were not going to order the whole meal at one time, but by ordering our courses one at a time we managed to spend a long time at dinner and had a great chat.

Back home I the set dryer on “Touch Up” and restarted it.  I proof read my BCM article and e-mailed clarifications to the editor and publisher.  I spent enough time on e-mail and websites for the dryer to finish, hung up the clothes, and played with my iPad for a little while.  I was tired enough that I just turned in for the night and did not even work of the blog or play games.  That’s pretty tired.

 

2014/09/20 (S) Bus Talk

All days have the same number of hours.  How those hours are divided up between light and dark, awake and asleep, busy or at leisure, varies with each day.  Basically, our day went like this:

  • We went to our weekly SLAARC breakfast in South Lyon.
  • We returned home so Linda could get to work on the bakery software conversion project.  She did that all day except for a break to go for a walk.
  • I called D. R. Electric Appliance to check on the range.  As I had figured it did not arrive yesterday (they would have called if it did).  They supposedly ordered it on Tuesday and told me it would take three days to get.  They do not receive product on the weekend so maybe Monday.
  • I worked at my desk on editing and uploading blog posts until 11:30 AM.
  • I went to Recycle Livingston with our weekly load.
  • I stopped at Lowe’s for a 250VAC/15A circuit breaker, outlet, and box.
  • Lowe’s parking lot connects to Walmart’s parking lot, so I stopped there for ICE brand flavored sparkling water and picked up a couple of bottles of  Leelanau Cellars Witch’s Brew seasonal spiced wine.  We had this last fall and enjoyed it.
  • When I got back to the house we had a light lunch of sourdough pretzel nibblers and hummus and then resumed our work.
  • By mid-afternoon I was tired so I took a nap.  I often do better sleeping when I’m tired rather than when I am supposed to sleep.  I also wanted to be rested enough to enjoy dinner this evening.
  • We met Chuck at the Carrabba’s at West Oaks Mall at 7 PM.  He had arrived ahead of us so we only had to wait about 20 minutes to get a table.  Linda and I both had the Tag Pic Pac, one their two vegan options.  It was long, relaxed meal and a great conversation, some of which was about buses (Chuck and Barbara also own a Prevost H3-40 converted coach).  We pulled out of the parking lot a little before 10 PM.
  • Back home we watched season 5 episode 8 (final) of Doc Martin.

That was our day and did not include construction projects or taking photographs.

 

2014/09/13 (S) Overnight Guest

Linda’s sister, Sister Marilyn, called a couple of days ago to let us know she would be in the Detroit area on business this weekend.  She wanted to know if we could fetch her this afternoon and if she could spend the night at our house?  The answer was “of course,” of course.  Her flight out wasn’t until Sunday evening, so Linda put the gears in motion and arranged a brunch with the local family for 10 AM tomorrow.

Being Saturday, we went to our ham radio club breakfast in South Lyon.  Before leaving our neighborhood we drove to the other end of the street (dead end with turn-around) to see where the gas hookup crew left off yesterday.  We knew they were working down there today because we saw the trucks leave sometime between 5:30 and 6:00 PM last night.  There’s a chance they will be back today and we wanted to see how close they were to connecting our house to the main line.  It looked like they had quite a few houses to do ahead of ours, so we went to breakfast.

We got home around 10:30 AM to find a crew working in our yard trenching in the branch line to our house.  I was told yesterday they were going to bore it in, so something obviously did not get communicated.  Not only that, they were running a 5/8″ line, which was way too small for the 425 meter we are supposed to get.  I stopped the crew and the guy in charge pulled out his paperwork.  It had “425” written on it big letters, but the drawing showed a 5/8″ line.  He agreed that the 5/8″ line was way too small for that meter and that we should have 1.25″ line.  They pulled the little bit of line they had already run out of the ground, raked out some of the dirt they had already trenched, and moved their machine across the street to trench our neighbors yard.

We were lucky we got home when we did.  They had already cut through some tree roots that did not need to be disturbed and would have torn up a lot more of our yard unnecessarily if I had not interrupted their work.  They were nice about it, but I still found it troublesome that I had spoken to two different supervisors face-to-face about this, one as recently as yesterday, but this crew showed up and did something different than what I had been told, and agreed, would be done.

I was finally going to try to remove the fogged window from the bus today, but we had a lot of rain overnight and woke to overcast skies, temperatures in the upper 40’s, and a forecast high of 57 degrees F with a strong chance of rain through mid-afternoon.  That was not the sort of weather for removing a window from a vehicle parked outside.  Besides, with Marilyn arriving mid-late afternoon I did not want to work on anything messy and then have to get cleaned up.

Linda looked up the kitchen ranges we had been considering.  The GE 30″ 5-burner double-oven convention model (JGB870DEFWW) was on sale again at Lowe’s for $180 off MSRP and we would get another 5% off the sale price by using our Lowe’s credit card.  If we ordered it today delivery would be September 27, longer than I would like, but it is what it is.  We have to order this range because Linda wants a white one to match all of the other appliances in the kitchen and the appliance stores do not tend to stock white ranges with the features we want.  I called our local Lowe’s store and confirmed the free delivery and take away of our current range.  Installation is $20 plus a new flex gas line for $30.

I called TOMTEK HVAC and got hold of Tom.  He seemed put off by the fact that I have someone else doing HVAC work at the house and will have the natural gas already tied in when he comes to convert the main house furnace from propane to natural gas, but he said he would check with Weil-McLain on Monday about what parts he needs to do the conversion.  While on the phone with Tom he suggested that we try D. R. Electric Appliance Sales and Service in Howell for our new gas range.  We looked them up on the web and got their (incorrect) phone number and hours.  I got the correct number from 411 before I realized that it was also on their website.  They closed at 2 PM on Saturdays, so we didn’t make it there today, but I called and got an answering machine, left my name, number, and the reason for the call.  Curt called me back a short time later.  I gave him the model number and he said he would call G.E. on Monday.  He said he had been holding off ordering G.E. appliances waiting for Columbus Day sale pricing.  He figured he would have the range three days from ordering and could probably install it at the end of the week or early next.  They charge $25 for installation and haul away, and $25 for the new flex gas line if we need one, so it’s the same $50 as Lowe’s.  (Lowe’s assured me that they were REQUIRED to install a new flexible gas line.)  That all sounded good depending on the price of the range.  Getting it sooner has some dollar value to us, we’re just not sure how much.

I stayed home while Linda went to Meijer’s for groceries.  Finding the crew in our yard this morning doing work they were no supposed to be doing spooked me enough to not want to leave the house unattended the rest of the day.  As long as I was stuck at home, I called Bratcher Electric to give them a heads up that the gas connection to the house was imminent.  Being Saturday I got their answering machine and left a message.  I also called Darryll at DCM Heating & Cooling and left a message regarding the gas connection.  Once the meter is hung and connected everything else depends on Darryll getting his piece done first.

We checked the website for Country Squire Fireplace and Lighting in Howell and saw a 10% off coupon, so I printed that.  I wanted to go there today and buy a set of high-efficiency vent-free natural gas fire logs but it will probably be tomorrow afternoon instead.  These logs are more efficient than a typical kitchen range and are designed to be used with the fireplace flue closed, throwing most of the heat they produce into the room instead of up the chimney.  Darryll said he would hook it up for us and add a shutoff valve when he came back to tie in to the gas meter, so we need to have it here before he comes back next week.

Marilyn called and said their flights were running a little behind schedule and that Linda should pick her up around 3 PM rather than 2:30 PM as originally planned.  She called back again and said 3:15 PM would be better.  Linda got back from the grocery store and we had a quick lunch of leftover Sloppy Joe’s.

With overnight lows in the 40’s, highs only in the mid-50’s, and the connection of our natural gas somewhat imminent, we decided we could afford to use propane to heat the house.  We have been conscious of our propane use because we did not want to get in a position where we needed to have either of the tanks filled.  I turned the furnace on and set all the thermostats a few degrees above ambient to take the chill off.

While Linda drove over to Lake Orion, Michigan to fetch Marilyn I decided to work at my desk selecting photos for gallery posts on the garage/HVAC project and natural gas work, and worked a little bit on the websites for the FMCA Great Lakes Converted Coaches and Freethinkers chapters.  I really need to have the GLCC site usable in the next three weeks and the FTH site within a month of that. That sounds ambitious even as I write it down and I suspect it won’t happen.

Linda and Marilyn got to the house around 4:30 PM and after we got Marilyn settled in her bedroom we just sat and relaxed and talked for a while.  We thought she might appreciate a good home-cooked meal but we ended up taking her to LaMarsa for dinner.  She had the Koshary, which we had last night, and we split an order of garlic almond vegetable Ghallaba with green salad and crushed lentil soup.  We all ate way too much pita bread with garlic spread and were uncomfortably full by the time we finished our meal, but it was delicious and we did not have to prepare it or clean up afterwards.

These days twilight now comes around 7 PM and it was dark by the time we got home at 8 PM.  I made a pot of decaf coffee and we settled in the living room for a long chat.  I set the thermostats back before we turned in for the evening as all three of us prefer to sleep in a cool room.

 

2014/09/06 (S) Deliveries

We were up early and off to our SLAARC ham radio club breakfast in South Lyon.  There was a good turnout and good conversation, some of which had to do with our future tower project.  Mike (W8XH) was driving to the Findlay (Ohio) Hamfest tomorrow morning and had room for one more in his car so I decided to go.

Back home we broke down cardboard, loaded it into my car with the rest of our recyclables, and headed over to Recycle Livingston.  Afterwards we stopped at the Howell Bank of America branch so I could get some cash for the Findlay OH Amateur Radio Club Hamfest tomorrow.  A little farther up the road we stopped at Lowe’s for grass seed and bought three plastic tubs to replace the cardboard boxes we have been using on the floor of the kitchen pantry for recyclables.  Lowe’s is at Latson Road and Grand River Road so we hopped on I-96 East over to US-23 and headed south towards Ann Arbor to drop off the window air-conditioner and visit with our son, daughter-in-law, and grand-daughter.

When we exited US-23 at Washtenaw Avenue the traffic was worse than usual, and it is usually pretty bad.  Ann Arbor got hit a lot harder by the storms last night than we did and two of the three traffic signals between the highway and Stadium Boulevard were not working.  Drivers were being courteous, and everyone was taking turns, but the traffic volume through this stretch of road exceeds its capacity even when the signals are working.

We got the window air-conditioner unloaded and moved to the second floor of the garage.  We had a nice visit that included reading stories to Madeline.

Madeline and Grandma Linda read a favorite story.

Madeline and Grandma Linda read a favorite story.

We were going to stop at the Whole Foods Market on our way home but decided to avoid the traffic jam and worked our way through a subdivision up to Geddes Road and back to US-23.  Back home we had a light/late lunch of leftover rice seitan and mashed cauliflower and then worked for a couple of hours getting things out of the storage pod and organized in the garage.  We moved the shelves away from the northeast wall so Darryll could work on the gas pipe when he returns.  We knew when we put the shelves there that we were taking a small gamble that we might have to move them.  Fortunately they slid easily without being unloaded.  We must have the storage container empty by the time we go to bed on Thursday evening as it is scheduled for pickup on Friday.

For dinner we had a nice salad, roasted Brussels sprouts, and sautéed potatoes with onions, garlic, and bell peppers. We finished the no-bake (frozen) double-chocolate torte for dessert. After dinner Linda played Scrabble and Words With Friends while I researched Acme screws, nuts, and related components that we need to get the ham radio tower fold-over mount operational.

I turned in earlier than usual as I needed to be up at 5 AM in order to be at Mike’s (W8XH) QTH by 6 AM to leave for the Findlay Hamfest.

2014/08/30 (S) By All Accounts

We went to the weekly SLAARC breakfast this morning.  We stopped on the way back to the house to get a food processor.  I shut down my ASUS laptop PC, packed it for travel, and headed for Mike’s (W8XH) QTH; the first time it has been out of the house since I bought it at the end of April.

I worked with Mike on the new SLAARC WordPress website, walking him back through the process of creating photo galleries.  He then uploaded pictures from the 2014 Field Day event, added captions to some of them, and created photo galleries.

I was going to create user accounts, but that turned out to still be a bit premature.  In showing Mike around the site we discovered that the home page login widget for the WP-Members plug-in was not working correctly.  It was last night, but that was before I installed the Global Hide Admin Toolbar plug-in.  Suspecting a minor incompatibility (although the site did not crash, thank goodness) I had to engineer a work-around.  The problem and solution turned out to be multifaceted.

One aspect of the problem was that we needed to remove the WP-Members widget from the Home screen, but it was the only place where a logged in user could log out.  Another aspect of the problem was the realization that users would have to click on one of the pages in the Member Only Area to get a login screen that would actually log them into the site and allow them to navigate wherever they wanted.

One facet of the solution was to create a new page that would appear at the right hand end of the main menu bar and place the WP-Members widget on that page.  It was not immediately obvious to me how to do this, or if we even could, but I eventually figured it out.  That provided something on the main menu bar, which remains visible at all times, where users can go to logout.  (They should also be able to log in there, but it’s the same widget that didn’t work correctly on the Home page.)

The other facets of the solution involved editing the e-mail that gets sent to a new user when their account is created and editing the User’s Guide, both of which describe the login and logout procedure.  As long as I had to create and upload a new version of the User’s a Guide, I decided to put the link on its own page so it would show up in the menu structure and be easier for members to find.  I did the same thing with the links to the official club roster documents.  Adding those two page then required me to edit two pages to remove the old links.  As the saying goes “it’s a process.”

Mike was still creating photo galleries so I drafted a notification e-mail for him to send to the members and sent it to him.  He had to leave to run an errand right after I left and planned to deal with sending the e-mail later that evening.  I will wait at least 24 hours after he sends it before I start creating user accounts.

I was back home in time to relax and work on this post before John and Diane arrived around 5 PM to visit and have dinner.  They brought a salad that Diane made and two bottles of wine; a sweet Shiraz that was unusual but delightful, and a more traditional Cabernet Sauvignon.  Linda made a penne pasta with sun-dried tomatoes and mushrooms, and made Italian bread from scratch.  She also made the chilled no-bake double chocolate torte for dessert.  It was so good everyone had a second piece.

Diane now has an iPad Mini and Linda spent time with her after dinner helping her configure some things.  They also managed to get connected through the iMessage feature.  Storms rolled in around 9 PM and we had brief periods of heavy rain and diffuse lightning all around.  There was a lull in the weather just before 11 PM so they gathered up their things and hit the road.  I cleared the table and Linda loaded the dishwasher.  She started it and then we were off to bed, tired from a long but very satisfying day.

 

2014/08/23 (S) Square Waves

We have so much to do at home and on the bus that we might have skipped the SLAARC (ham radio club) breakfast in South Lyon this morning, but I had agreed to meet Chuck at his shop (bus garage) at 10 AM in Novi and to bring Mike (W8XH) along with his oscilloscope to look at the tachometer signal, or lack thereof.  We had a nice chat with our ham radio friends, discussed having dinner in a week or so with Bruce and Linda, and then headed to Chuck’s shop.

We had two different opinions as to what signal we might find, if any, at the end of the wires that connect to Chuck’s tachometer.  Matt, from Bob’s Speedometer, told me that the signal to both the VDO tachometer and speedometer were variable frequency square waves at 3 to 5 volts peak and that the electronics in the gauge moved the needle in proportion to the frequency.  Mike (W8XH) had talked to Jim (N8KUE), who works in the research lab at Ford Motor Company, and Jim was of the opinion that the input to these gauges was a pulse width modulated signal.  With pulse-width modulation the frequency and amplitude of the waveform are constant but the width of the “pulse” (the “on time” of non-zero voltage) varies from zero to some maximum percentage of the half cycle, up to 100%.  If it is on for the entire half cycle it becomes a square wave.  The longer the pulse (on time percentage) the more energy is transmitted.  The gauge electronics can convert that to a needle position or run a motor faster or slower, such as might drive an odometer.

So which was it?  Well…neither.  What we saw was an alternating current signal that appeared to simply be an impulse (sudden spike in the voltage), one positive and one negative per cycle, with the frequency responding in direct proportion to the engine RPM.  The impulse had a rapid but noticeable decay time that appeared to me to exponential, but we did not have the wires connected to a load and that may have affected the signal. The voltage we were seeing appeared to be in 300 mV range, a far cry from the 3 – 5 volts we expected.

We loaded the cardboard in my car before going to breakfast, so when we were done at Chuck’s we headed directly to Recycle Livingston.  From there we went to pet Supplies Plus for some cat litter and then to Lowe’s for four more sheets of drywall (Sheetrock) and a large tub of better drywall compound.  After fighting with the back wall of the garage recently and having trouble with using the patching and repair compound yesterday, I wanted a drywall compound that would go on easier and smoother.  It could just be my technique, of course; I wasn’t that good at dry-walling 32 years ago, and feel like I have lost what little technique I once had.

Back home we unloaded everything, changed into our work clothes, and had lunch; grilled “cheese” sandwiches with tomatoes and dark leafy greens and fresh peaches, ripened to perfection.

While Linda sanded the drywall compound I applied yesterday I removed the panel from the library side of the opening for the old window A-C unit.  I insulated the cavity, cut and installed a new piece of drywall, and re-taped the seams.  I helped Linda finish the sanding, wiped off the dust with a wrung out sponge, and then applied another coat of drywall compound.  I then applied a first cost of “mud,” as drywall compound is commonly called, to the filler panel in the library.

In preparation for dry-walling the new utility closet we had to do some carpentry to box around the flue and gas pipe where they pass through the west wall.  We also had to box around the supply air duct where it passes above the utility closet door.  Finally, we added some backer boards along the edge of the platform by the west wall.  The purpose of all of this carpentry was to provide backing along all drywall edges so it will be supported and can be secured.  Our final task for the day was to trim a piece of 2×4 to block off the top of the wall cavity where the return air duct is connected next to the door between the library and the garage.

For dinner we had leftovers from Thursday:  Koshary and pita bread with vegan garlic “butter.”  Linda read somewhere recently that drier white wines are generally considered (by someone) to go better with Middle Eastern food, but we thought our 2009 Egri Merlot went quite well with dinner.  Of course, Koshary is an Egyptian dish, and so perhaps more Mediterranean than Middle Eastern.  All of that reminded me that there really are no rules about these things; drink what you like and enjoy life.

 

2014/08/16 (S) Bus People

We enjoy the company of our fellow “hams” (amateur radio operators) and so our first destination this morning was the Senate Coney Island in South Lyon for the weekly SLAARC breakfast.  It was a much smaller turnout than last week, but that often leads to better conversation for the lower noise level if no other reason.

Converted bus people are also our kind of people, so our second destination today was the Fireman’s Park in Clio, Michigan where the joint CCO/GLCC “Back-to-the-Bricks” rally was taking place.  There were 22 rigs in attendance, 19 of which were converted buses.  We got there around 11AM and spent the afternoon visiting with whomever was around, starting with Pat and Vickie Lintner.  Light rain moved in during the early afternoon and we had a nice visit with our friends from Ontario, Bill and Karen, in their bus.

With a few exceptions we knew all of the attendees and they all knew us, so this was a comfortable reunion with old and new friends.  We had a chance to talk to Glen Williams, who runs a clock repair business named Tenor Clocks, about our broken grandfather clock and made an appointment for him to come work on it on Wednesday at noon.  (Glen is also part of a four man singing group named “Three Men and a Tenor”.  Glen is the Tenor.)  We were most cordially invited to stay for dinner but we had not paid to attend the rally and there was very little food we could (would) eat so we left around 6 PM as the group was assembling for the evening meal.

We stopped at the Panera in Fenton on the way home and enjoyed their black bean soup and Mediterranean veggie sandwich, hold the feta cheese.  Once home we enjoyed a small glass of Late Harvest Vignoles wine from Acres of Land winery in Kentucky while we worked on our iPads a bit before bed.

 

2014/08/09 (S) WP User Accounts

We went to our ham radio club breakfast in South Lyon for the first time in several weeks after which we visited with Chuck Spera at his shop in Novi.  A while back I helped him retrieve an RV sofa/bed that he purchased from Pat and Vickie Lintner in Osceola, Indiana (near Elkhart).  He had removed the old couch from his Liberty bus conversion and installed this new (to them) one.  He wanted to show us the result and we wanted to see it.  We sat and chatted for a while about bus conversions and then left him to work on his race car while we finished a morning errand.

We loaded our weeks’ worth of recyclables in the car before we went to breakfast and headed to Recycle Livingston from Chuck’s before returning home and having a bite of lunch (we do not eat much for breakfast at the restaurant in South Lyon).

I worked the rest of the day on cleaning up the SLAARC portion of the spreadsheet I created for generating usernames and passwords for WordPress websites.  I had just received an updated roster from the treasurer, Paul (N8BHT), and had to bring my spreadsheet up-to-date before creating WordPress users.  A portion of each of the organization websites I am creating will be restricted to current members and require a username and password to gain access.  Each user account, in turn, must be tied to a unique e-mail account.  It’s been a bit of work to set up and I am far from done at this point.  While I was working on the SLAARC info I realized that I had not finished the same work for the other two organizations so I worked on that as well.

The last few weeks have been physically and mentally demanding and we both needed and enjoyed the easier days we had yesterday and today and the one we plan to have tomorrow when a long-time friend and co-worker of Linda’s is coming to the new house for her first visit.  We watched another episode of Peroit on our Apple TV before turning in for the night.

 

2014/07/19 (S) A Busy Day

At 7:30 AM we were about to leave for our usual Ham radio club breakfast in South Lyon when we realized some of the landscaping crew was already in the back yard.  I talked briefly with Steve to see if he had any questions for us and to let him know we would be gone for the morning.  We arrived at the Senate Coney Island a little later than usual to find a big group, some of whom were not regular attendees.  We would normally have lingered and enjoyed conversation over coffee, but we needed to get to Ann Arbor for a quick visit and to pick up my socket wrench toolbox from our son.

When we arrived at Brendan and Shawna’s house Madeline was outside pushing her push toy around the front yard.  As soon as she saw us she took off down the sidewalk towards the park.  Shawna retrieved her and got her stroller ready while Brendan and I transferred things out of and in to my car.  We then walked to Burn’s Park where Madeline played for about 45 minutes before we headed back to their house.  We had hugs all around and left.  We stopped at the Whole Foods Market in our way back to US-23 and then headed for home.

Back at the house, four landscapers were working, including Steve, and lots was getting done.  Hurray!  I got busy working on the electrical sub-panel in the garage while Linda made a run to the recycling center.  When she got back she did a load of laundry, which is normally my job, while she cleaned the lower level of the house.

I had to make a trip to Lowe’s for electrical parts and Linda had to make one in the evening to buy some 15 Amp single-pole circuit breakers, but I managed to get the old sub-panel removed, the wires labeled, the new panel hung, and all but one wire reconnected.  That wire needs to be replaced and I will do that first thing in the morning.  We turned the breaker on in the basement that feeds power to the sub-panel in the garage, turned on the main breaker in the sub-panel, and then turned each branch circuit breaker and checked to see that it was working correctly.

The reason Linda had to go get 15 Amp circuit breakers is that I discovered the old sub-panel had 14 gauge (AWG) wires “protected” by 20 Amp circuit breakers.  14 AWG wires are only rated to carry 15 Amps.  If allowed to carry more than that for any length of time they will overheat which could melt the wire insulation and lead to a short or worse, arcing, which can start a fire.  I will be placing those circuits on 15 Amp breakers in the morning.