Category Archives: coffee

20150411-15 (S-W) NM, TX, OK, AR, MO

[Note: There are no photos for the five days covered in this post.]

2015/04/11 (S) Relaxing Chores

We like to get up and go do things, but we also like not having to get up and do things.  Today we got up when we were ready to.  I used up the last four scoops of coffee beans from our first three pounds and opened the next/last three pounds; one each of Sweet Seattle Dreams, Cafe Europe, and Ethiopian Yirgacheffe.  Each of these is a half regular, half decaffeinated custom blend that Jeff at Teeko’s Coffee and Tea in Howell, MI makes for us.  Linda installed iOS 8.3 on her iPad while I made the coffee.

We had toast and jam for breakfast using some more of the English toasting bread we bought at Smith’s the other day.  After breakfast Linda played several of her word games, including Words with Friends, online with Karen.  I installed iOS 8.3 on my iPad and then worked on yesterday’s blog post and e-mailed it to myself.  (It is still the easiest way for me to get it from my iPad to my laptop, which somehow just does not seem right.)

Mid-morning Linda started cleaning the coach.  We have been in dusty environments for a lot of the winter, especially the last few weeks, and the coach needed a good vacuuming.  We don’t vacuum as often as we would if we did not have the cats with us as the vacuum is rather loud and they are afraid of it.  They do not like the vacuum cleaner at home either but they can get a lot farther away from it and have a lot more places to hide in the house than they do in the bus.

While Linda worked on the interior of the bus I got out the water softener, pre-filter, and hoses.  I first connected everything so I could run water through the pre-filter to remove any sediment and then backwards through the softener to back flush the resin bed.  I then connected the hoses in the normal forward flow direction and added 26 ounces of non-iodized table salt to the captive filter housing on the inlet side of the softener tank.  I no longer use this housing for a filter.  Its sole purpose is to hold salt for regenerating the softener.  That way I do not have handle a wet filter while trying to keep it clean so I can reinstall it.

The regeneration procedure was the same ordeal it has been all winter, taking a few minutes of my time spread out over several hours.  Most of that time I worked on blog posts and photos, but my work was interrupted every 20 to 30 minutes to attend to the softener.  I did, however, manage to get the water coming out of the softener to finally test at 1.5 gpg TH.  That should be enough softening capacity to get us home without having to regenerate the water softener again.

For dinner Linda made a barley, split pea, and lentil dish with sautéed vegetables and a hint of soy sauce.  It was very tasty.  We had the TV on the local PBS station and I finished my consolidated blog post and image gallery post for the week of the Escapade rally and uploaded them to our website/blog.

2015/04/12 (N) Edgewood, NM to Amarillo, TX

Today was a travel day and we normally skip breakfast and coffee on such days, but not today.  I was up a little after 7 AM and we did not plan to leave until 9 AM so we had time to make, consume, and digest some coffee and toast.  I turned off the electric heating element for the Aqua-Hot and turned on the diesel burner and engine pre-heat coolant circulating pump.

When we were done with breakfast we got the Dewalt air compressor out of the car and checked all of the tires on the bus and the toad.  It turned out that all of the pressures were slightly higher than where I normally set them, due in part to our altitude of 6,700 feet ASL, and that was want I wanted.  In driving from the Route 66 RV Park in Edgewood, New Mexico to the Overnite RV Park in Amarillo, Texas we will drop just over 3,000 feet in elevation.  That, in turn, will cause the cold pressures in the tires to drop.  The current cold pressures in the tires should be sufficient to allow for that, but I will check the TireTraker monitor in the morning to be sure.

By the time I finished checking the tires Linda had the interior ready for travel.  We hooked up the car, set the car to be towed, switched on the bus chassis batteries and engine accessories air supply, checked the lights, turned off the Aqua-Hot burner and engine pre-heat coolant circulating pump, started the bus engine, and switched the Level Low system to drive mode.  A few minutes later the chassis air system was fully pressurized and the coach suspension was at ride height.  We exited our site easily, pulled out of the RV Park onto Historic Route 66 westbound, and a mile later made two right turns and accelerated onto I-40 eastbound.

Once we were underway Linda called the Overnight RV Park in Amarillo, Texas to make sure they had open sites.  They did, but not many so she gave them our name to hold a pull-through site that would accommodate our bus with the car attached.  Since we are just staying one night we do not plan to not unhook the car.

We knew from our maps and what we could not see to the east that we were done with the Rocky Mountains.  We were now in the Great Plains and would be from here all the way through Oklahoma.  Not that the terrain was flat; eastern New Mexico was rolling terrain, occasionally steep, with mesas.  Not surprisingly the terrain did not change abruptly as we crossed into Texas, although the road surface and time zone did.  For lack of a better, or more official, line of demarcation I consider the central time zone as the boundary of the middle-west.

While not as dramatic as the mountain west the Great Plains are a place where grasses and low brush dominate a natural landscape that is largely devoid of trees and that have a beauty all their own.  The other thing we noticed as we moved east was the thickening cloud cover and occasional storm clouds and virga.  Linda had checked the weather forecast so we knew there was a low, but non-zero, chance we would encounter rain while driving and/or after we got parked for the evening.  We did, in fact, drive through a couple of miles of very light rain somewhere near the New Mexico / Texas border.

We only stopped once for a bathroom/stretch break and made very good time.  The posted (maximum) speed limit for most of I-40 in both states is 75 MPH.  Back east I typically limit my speed to 62 MPH or less if the speed limit is lower.  What I have discovered out west is that the bus really likes to travel at 68 MPH turning just under 2,000 RPM and so do I, at least out here in the wide open spaces.

Linda had selected the Overnight RV Park in Amarillo for several reasons.  For one, the name and description strongly suggested that this park was set up to accommodate overnight visitors passing through the area in their RVs and looking for a place to spend the night.  For another, it was on the east edge of Amarillo, so we will not have to drive through town in the morning when we pull out.  Finally, it was right across the street from a Pilot Truck Stop, so we did not have to make a separate stop for fuel.

We pulled of I-40 at exit 75 around 2:30 PM CDT and pulled in to the truck stop.  The place was crowded with trucks but we got lucky and pulled in behind a semi that was done fueling and pulled out shortly thereafter.  There was some confusion regarding the pump number so it took a bit longer than usual to top off the tank, but we were not pressed for time as our RV park for the night was right across the street.  Linda settled the charge and we followed several tractor-trailers to the exit, back to the main road, and then turned north and drove the short distance up to the entrance to the RV Park.  We turned in and stopped by the office where Linda got us registered.  As is the case in most RV Parks we got a map of the campground with our site and entrance path marked, the login for the Wi-Fi, and the combination lock for the bathrooms.  We also received information about where to go and what to do in the event of violent weather.  Welcome to the Midwest and Tornado Alley.

Overnight RV Park is an older park with a lot of long-term residents, but it was not run down and had some nice, mature trees and plants.  I was momentarily concerned about low overhanging branches and tight turns when we pulled in but the gravel interior roads were wide enough, and the trees trimmed enough, to make access to our assigned pull-through site very easy.  I did, however, lift the tag axle to allow for the tighter turns.

We went through our normal arrival routine, got connected to the Internet, and started looking at our RV park options in the greater Oklahoma City area.  We plan to stay two nights and take part of our one full day to visit my Uncle Bob and Aunt Helen who live in Norman just south of OKC.  I had not contacted them, however, as our travel plans have been very fluid.  Now that we were a day’s drive away I called to let them know we would be in the area.  I was a bit surprised that Helen answered the phone and even more surprised to learn that Bob was in “rehab” although Helen did not say why.  She did say that we could visit him so we arranged to go to their house on Tuesday morning at 10 AM, get the address/directions to the rehab facility, and possibly take Helen with us to go visit him.

I texted my sister and niece to let them know that Friday from lunchtime to dinnertime would work well for us and accommodate their availability.  Linda texted our children to let them know we had landed safely in Amarillo and then texted Marilyn to share the same information.  Marilyn called back a bit later and Linda filled in the details.

The RV Park options around OKC were limited, which seems to be typical of urban areas including St. Louis, Missouri.  The options also seemed to be less than ideal based on reviews and expensive by our standards.  In the end we decided to try the Cleveland County Fairgrounds in Norman.  We sent a message via RVillage to someone who is currently there in a 42′ motorhome and inquired about the place.  They wrote back and said it was fine but was near full, does not take reservations, and only has 30A electrical service.  All of that was fine by us.  The pluses are that it is only a few minutes from my Aunt and Uncle’s house and it is only $20 per night, so we are going to leave early tomorrow and see if we can snag a spot.

inda re-heated some leftovers for dinner, after which we went for a stroll around the RV park.  We had just exited our coach and got into a conversation with our neighbors to the north.  They were working on errands so after a good chat we left them to their work and went on our walk.  Getting out and moving around in the cool, fresh air was just what we needed after a long day of sitting and driving and invigorated us enough to stay up until 9 PM.

2015/04/13 (M) Amarillo, TX to Norman, OK

The weather forecast did not favor travel during any particular part of the day; it was going to be rainy and windy regardless of when we left.  Getting a spot at the Cleveland County Fairgrounds, however, might depend on getting there early.  We targeted an 8 AM departure for our 4.5 hour, 270 mile trip.  We were up at 7 AM and each had a cup of tea and a banana.  We did not unhook the car last night, so all we had to do was run it through the towing procedure and it was ready to go.  We pulled out of our site at 8:20 AM.

Our route today was I-40 east to I-35 south to US-77 south to East Robinson Street.  All but the last 20 miles was on I-40 which mostly ran east to northeast.  Winds were 15 – 20 MPH and gusty out of the northeast the whole way.  That meant I almost always had a headwind component and often had a crosswind component.  The headwind requires the engine to work harder so I set the cruise control at 64 MPH instead of the 68 MPH I ran most of yesterday.  The crosswind component meant I had to actively work the steering and the lower speed made that more comfortable as well.

Most of the trip was through rural countryside with good road surface and light traffic.  We encountered a few construction zones but there was no work being done due to the weather.  As we approached the Oklahoma City metropolitan area traffic became much heavier, as expected, but the highways had more lanes and everything seemed to move along just fine.  In particular I-40 and I-35 always had at least three lanes allowing me to stay in the center, away from entering traffic, and move to the left or right as needed for an exit ramp.  The whole drive would have been easier without the rain and constant fiddling with windshield wipers, but I was always able to see well enough to maneuver safely, it was just more work and bit more stressful than normal.  I seem to handle urban road systems OK; it’s just not my favorite thing to do.

The Cleveland County Fairgrounds was easy to find and easy to access.  As soon as we pulled in we could see where the RVs were parked.  I pulled up out of the way while Linda called the Fairgrounds office.  She was told to go ahead a find a place to park and then register at the kiosk or in Building G.  I pulled up into the gravel parking area that had the RVs backed along two sides, like an “L.”  One leg of the L was paved and the other was grass/gravel.  We noticed one empty site in the paved area so I pulled around in front of it (so no one else could take it) while we unhooked the car.  (When camping in a no-reservations, first come, first served campground you have to stake your claim to an empty site.)  Linda moved the car out of the way and then spotted the rear end of the bus while I repositioned it and then backed it into site #9.  We have been towed out of two fairgrounds at the end of rallies where it rained so we were glad to get this paved site.

The sites here are all full hookup with 30 A electric and include usable Wi-Fi for $20/night.  That is a much better deal than anything else we could find in the OKC area, and is also the closest place to where my aunt and uncle live, so it was a great find.  We probably won’t use the fresh water or sewer connections and the 30 A service will be OK.  Apparently there are also some 50 A sites but we did not need that much power and did not want to take the time to see if one of them was open.  Given forecasted high temperatures that will barely reach 60 degrees F we will not need our air-conditioners.  As for heat, we will use our Aqua-Hot in diesel-fired mode for domestic hot water and space heating, if needed.

Once we had the power connected and got settled in I made a pot of coffee while Linda made roll-up sandwiches for lunch.  She then checked us in to the Fairgrounds on RVillage and made our reservation for the Red Barn Rendezvous RV Park near Edwardsville, Illinois starting on Thursday.  We will be in the St. Louis, Missouri area for four or five nights visiting family before pushing on to Twelve Mile, Indiana.  She then researched places to stay near Joplin and Springfield, Missouri for Wednesday evening.

While Linda was doing all of that I finished up yesterday’s blog post and started working on this one.  I then logged-in to RVillage.  There are three other RVillagers checked in to the CCFG so I posted to the home feed and to the park feed to see if I could make contact with any of them.  One of them (Hollywood Bob) is also a member of the SKP Photographers BOF which Linda and I help run.  (I am the owner/leader of the RVillage Group.)  I sent him a friend request and then a personal message.

The rain let up not long after we arrived at the Fairgrounds but the wind continued, with gusts occasionally rocking the bus.  The bus is fairly massive but also has a lot of surface area and sits on air springs.  We do not have leveling jacks, so strong/gusty winds can, and do, rock the bus.

Hollywood Bob and his girlfriend Barb walked by so I went outside to chat with them briefly and we arranged to walk over to a local coffee shop at 8 AM tomorrow.  I then spent the late afternoon and early evening editing the text for my March 13th blog post on our visit to the Sonoran Desert Museum west of Tucson and then worked on selecting photos for the post.  Somewhere in there we took a break and went for walk around the Fairgrounds.  It is not a large facility but has nice buildings and grounds.

Linda heated up the last of the barley and vegetable leftovers and steamed some halved Brussels sprouts and finished them with a White Peach Balsamic Vinegar Glaze from the Queen Creek Olive Mill near Arizona City, Arizona.  Yum.  After dinner we turned on the front TV and tuned in PBS to watch Antiques Roadshow.  I finished selecting and processing photos for the March 13th post around 11:30 PM but did not upload it

2015/04/14 (T) Bob and Helen

I was up at 6:30 AM and uploaded my blog post for March 13th.  We had spent that day at the Sonoran Desert Museum west of Tucson, Arizona and photographed the sunset from nearby Gates Pass.  The post was brief (by my standards) but I put over 30 photos in an image gallery.

At 8 AM we walked over to Hollywood Bob and Barb’s rigs, met up with them, and then walked the short distance to the Dora Marie Bakery and Coffee Shop just across Porter Avenue from the Cleveland County Fairgrounds.  We sat there conversing over coffee until 9:45 AM, mostly about RVs and RVing as that is generally the first and easiest conversation to have with new friends.  I already knew from a brief chat with Bob yesterday that both of them are members of the Escapees RV Club and that Bob is a member of the SKP Photographers BOF.  Bob is also a Freethinker and knew that we were as well from our RVillage Profile.  We found out over coffee that they are both members of the WINs (Wandering Individuals Network) and LoWs (Loners on Wheels) which are independent groups for single RVers.  As we were walking back to our rigs we agreed to get together for SKP happy hour at 4 PM.

Our main reason for being in Norman, Oklahoma was to visit my Uncle Bob and Aunt Helen.  Uncle Bob earned a Ph.D. in micropaleontology over 60 years ago when Ph.Ds. were less common than they are now.  He moved to Oklahoma after finishing his degree and did extensive work on the Arbuckle Mountains.  A Google search on “Robert O. Fay” produced a lot of hits referencing his published work.  He was attached to the University of Oklahoma at one time and that is what brought them to Norman.

Bob just turned 88.  He and Helen have been married for 49 years but never had children.  Helen had one son, Scott, from a previous marriage.  Scott married Linda and they had two children, Tiffany and Philip.  Scott passed away a while back but Linda still lives in Norman and teaches in OKC.  Tiffany and Philip and their families also still live in Norman.

I last saw Bob and Helen four years ago on the drive back to Michigan from Livingston, Texas where I had picked up our Honda Element from Dennis and Carol Hill.  Helen was having problems with her back at the time but Bob was as sharp as I remembered the last time I saw him 26 years earlier while returning from a trip out west with Brendan.  All of our memories of that visit were a bit vague but my recollection is that Meghan and my sister, Patty, met us there so Patty must have driven Meghan to OKC from St. Louis, Missouri.

When I called on Sunday to let Bob and Helen know we would be in the area I talked to Helen and found out that my uncle was in a rehabilitation facility not far from the house but she did not say why.  When we arrived at their house at 10 AM this morning we were greeted by Tiffany, Brandy (Philip’s wife), and Helen who was up walking around and sharp as ever.  We visited briefly and then followed Tiffany and Helen over to the rehab facility.

Uncle Bob is in the facility recovering from a persistent pneumonia, which was treated with an antibiotic to which he was allergic, but he also has Parkinson’s.  He is still coherent but the decline in both his physical and mental condition was striking.  I was not shocked by that, however, and only briefly surprised by virtue of not being fully prepared.  We had a conversation nonetheless, and Bob asked, and talked, about family and genealogy which became his research passion along with geology.  Tiffany took a cell phone picture of Linda and me with Bob.  She had to get back to work so she took Helen home while Linda and I stayed a bit longer to chat with my uncle.

Bob was tired, dozing on and off, and it was getting close to lunchtime.  Staff also needed to check on Bob so we took our leave.  Although we will be back this way in future years I had the strong sense that Uncle Bob is not going to improve going forward and this may be the last time I get to see him.  It was not quite the meeting I had envisioned, but I was glad for what we had.  My dad will be 90 in June and cannot travel very far from his home so I don’t see any way he and his brother will ever meet again.  There is always a final everything but it is usually only clear in retrospect.  Such is life.

Before Tiffany and Helen left Tiffany called her mom (Linda) to see if she could be available to get together after work this evening.  Linda said she could rearrange some things with her brother and would love to meet for dinner.  We discussed meeting at the house and going out to dinner from there.

Tiffany invited us to stop by her school, which is just down the street from the Fairgrounds, so we did that right after lunch, which consisted of a couple of tofu hotdogs wrapped up in soft tortillas with mustard and relish.  Not WFPB but definitely vegan and definitely tasty.  Tiffany gave us a tour of her school and we got to meet Cody, her significant other, who also works at the school.  She had talked to her mom (Linda) and Helen and they decided that we would all be more comfortable and better able to converse at the house.  We explained how we eat and Tiffany said she and Brandi (Philip’s wife) would take care of bringing in food and make sure there were items for us.

I spent most of the afternoon working on blog posts but took time out to check the pressures of the two front bus tires.  I thought I would have to adjust all of them now that we have descended to 1,200 feet ASL, but the front tires were still close to one another and above the minimum required pressure, so I did not get out the compressor.  By 3 PM I was feeling the need for a nap and snoozed for an hour.

We walked over to Barb and Hollywood Bob’s rigs at 4:30 PM.  We were going to do SKP happy hour at 4 PM but we were not sure we could carry glasses of wine around the Fairgrounds so we went empty handed.  The Farmers Market opened at 4 PM so Bob, Linda, and I walked over to check it out while Barb started preparing their dinner.  They had to be at a dance event at 6 PM and we needed to be at Uncle Bob and Aunt Helen’s house around the same time.

Brandi has been Uncle Bob’s primary caregiver when he is at home and she brought him from the rehab facility to the house for the evening.  There was a houseful of people with laughter and energy and it was nice to see Uncle Bob and Aunt Helen surrounded by so many people who obviously love them and care about them.  Dinner was salad greens, vegetables, fresh fruit, sandwich fixings, and deserts and there was plenty for us to choose from.  Here’s how the family fits together:

  • Bob is my father’s younger/only brother (by two years).
  • Helen had one son, Scott Pelton, from a previous marriage.
  • Scott married Linda and they had two children; Tiffany and Philip.
  • (Scott passed away some years ago.)
  • Tiffany has three girls (young ladies); Alexis, Brianna, and Caitlin.
  • Brianna has a son, Liam, who is Bob and Helen’s great-great-grandson.
  • Philip married Brandi and they have three children; Cassidy, Cheyenne, and Danika.

We stayed until almost 9:30 PM and had a great visit that ended with a discussion about Linda and her three grand-daughters coming to Michigan for a visit sometime.  Tiffany texted me the cellphone photo she took of Linda, me, and Uncle Bob at the rehab facility this morning.  Caitlin set up a camera and took photos of the entire group.  When we got back to our rig I replied to text messages and provided our e-mail address and home phone number to Helen and Tiffany.

2015/04/15 (W) Norman, OK to Carthage, MO

There is always way more to do in any given area than there is time to do it, and the greater Oklahoma City area, including Norman, is no exception to that.  But our presence here proved to be the catalyst for a large gathering of people to whom we are related by marriage through Helen, my only Aunt, and only by virtue of her being married to my only uncle, Bob.  While it would have been nice to visit longer after last night’s gathering it would have been anti-climactic.

Through the serendipity that RVillage makes possible we also made the acquaintance of Barb and Hollywood Bob at the Cleveland County Fairgrounds.  As much as we would have liked to have coffee with them again this morning, we don’t usually have our morning coffee on travel days and wanted to be on the road by 9 AM.

Linda had been checking the weight restrictions on the roads in our home county and noted yesterday that they will be lifted on the 16th.  That means we have a green light to return to our house whenever we want to.  We already have plans to spend four nights near St. Louis, Missouri and visit family, and at least a couple of nights in Twelve Mile, Indiana visiting Butch and Fonda with whom we started this southwestern adventure on November 30th, 2014.  We will spend our final night at the Camp Turkeyville RV Park so we can dump our holding tanks before arriving home.

All of which is to say we had over 600 miles to travel from Norman to St. Louis, which is two day trip for us, with a reservation at an RV Park in Edwardsville, Illinois starting Thursday afternoon and arrangements to visit with family on Friday, Saturday, and Sunday.  Linda researched possible intermediate locations to split the distance roughly in half and found the Coachlight RV Park on I-49 one mile north of I-40 near Carthage, Missouri.

We did not take the time to buy an Oklahoma Turnpike pass and decided not to take I-44 northeast out of OKC.  From the CCFG we headed west on Robinson Street back to US-77 north, merged onto I-35 north, and then exited onto I-240 east.  Somewhere east of OKC I-240 ended and merged into I-40.  As urban highways go it was an easy exit from the greater OKC area.  We stopped at a rest area just before crossing the Oklahoma/Arkansas border and took a short lunch break, having vegan cold cut rollup sandwiches.

We continued east on I-40 to Fort Smith, Arkansas and then headed north on I-540, which has been re-signed I-49, through the Boston Mountains toward Fayetteville and Bentonville, the corporate home of Wal-Mart.  I-49 did not continue all the way into Missouri and became US-77 as it passed through a narrow valley and small towns.  A few miles into Missouri the road became I-49 again.  We stayed with I-49 up to where it joins with I-44 east near Joplin, Missouri.  About 10 miles later I-49/US-77 split off to the north and one mile later we exited, crossed over the Interstate, and pulled into the Coachlight RV Park.

The weather was overcast with occasional drizzle for the entire trip but it was a beautiful drive nonetheless.  Eastern Oklahoma is green and rolling and northwest Arkansas adds small mountains to that topography.  The bus ran well all day including the steepest grades.

The Coachlight RV Park is located behind the Coachlight RV Dealership with very easy access.  Linda got us registered but then we had to wait quite a while for someone to move the motorhome in front of us.  Again, we were given instructions on where to go and what to do in the event of extreme/violent weather.  The Park is built into a north-facing slope with wide paved roads behind an RV dealership of the same same.  The RV dealership was the emergency shelter.  Most of the sites are pull-through except along the two outside edges.  All of the sites are wide, long, and level gravel with full hookups including cable TV and Wi-Fi.  The Park has its own well with a water softener so the water at the sites is very soft.  The Park allows customers to wash their rigs so we got out the hose, spray nozzle, and long-handled soft brush and rinsed off the car and the bus as best we could.

We went for a walk around the Park to stretch our legs and stopped by the office to check out the meeting room.  There is a small RV rally here and we got to see the meeting room which was very nice.  For dinner Linda made a macaroni and mushroom dish with onions, garlic, and kale followed by red grapes.  Very tasty.  We watched a few TV shows and called it a day.

 

2015/02/19-23 (R-M) Solo in Q

2015/02/19 (R) Over-Cranked

I have been busy cleaning/waxing the outside of the bus and writing articles so I have not been able to spend much time writing my blog posts or uploading them to our website.  A couple of weeks ago I uploaded the posts through the end of December 2014 but then we got busy and I have not uploaded anything since then.

Here is how my day went.  I Got up at 7:30 AM and had granola with fresh blueberries for breakfast.  It was cloudy and cool most of the morning, so I tried to focus on the bus cleaning/waxing and was able to clean and wax the passenger side of the bus from the front to the back edge of the dinette fixed window.

Another dramatic sunset reflected off the recently waxed driver's side of our coach.

Another dramatic sunset reflected off the recently waxed driver’s side of our coach.

The whole house generator at home runs a self-test every Thursday at 11 AM (EST) and e-mails its status to us.  Instead of getting a message at 9 AM I got one at 9:10 AM (MST).  The message was an Over Crank fault indicating that the Genset had failed to start, had dropped out of Auto mode, and would not attempt to restart until the controller was reset to clear the fault.  I did not assume that Linda had paid any attention to the details of the message so I called her.  She called Bratcher Electric and they told her how to reset the controller.  They also said they had received similar notifications/calls from other customers.  Sure, the temperatures have been below negative 10 degrees F, but the whole reason we have the generator is to protect us against power loss which usually occurs under the worst weather conditions.  The service technician is coming out on Wednesday to check the unit, which is still under warranty.

I took a lunch break at 2PM and had a jumbo tofu hot dog and some hummus with a few Fritos corn chips.  For most of the rest of the day I worked at my laptop selecting and editing photos for my Quartzsite 2015 BCM article.  I made a quick trip to the Road Runner market for some 26 ounce containers of salt and stopped at Herb’s Hardware store looking for a clear filter housing, but they did not have any.

I made a nice, large salad for dinner and finished up the box of Franzia Refreshing White wine.  I continued to process photos for my article late into the evening, taking an occasional break to check e-mail and check out the SteelMasters website.  They sell steel Quonset hut style building kits and this might be a more economical way to build our bus barn, and easier as a do-it-ourselves project.

2015/02/20 (F) Touch of Oranges

I was up late last night so I slept in until 8 AM this morning.  I awoke to cloudy skies and cool temperatures so I skipped breakfast and got right to work cleaning/waxing the passenger side of the bus, which faces south and gets a lot of sun.  I have been working front to back but decided to reverse direction.  The reason was to do as much of the side aft of the patio awning as possible while it was cloudy.  The area under the patio awning is shaded (by the awning) so I can work there anytime I feel like it.

Butch was working on their new VDO electronic speedometer and needed to borrow my air-over-hydraulic bottle jack so I dug it out of the front bay for him.  Mid-morning Lou and Donna Rice stopped by to say “hi.”  They were in town looking for newspapers that Lou could use to mask off their motorhome so he could spray some paint.  It just so happened that there was a large box of newspapers over by the trash container and they were able to get all that they needed at our campsite.

The sunset in Q backlights Saguaro cactus, a palm, and a Palo Verde tree.

The sunset in Q backlights Saguaro cactus, a palm, and a Palo Verde tree.

I quit cleaning/waxing around 11:45 AM and turned my attention to the water softener.  I have regenerated it twice this week, first with solar salt and then with non-iodized table salt, but the water coming out of it is still testing in the 3 – 7 gpg range.  A reading of 7 is considered ‘hard’ so at this point I am not very happy with our water softener.

I filled the filter housing with yet another 26 ounces of finely ground non-iodized table salt and started the regen process for the third time this week.  This time I ran the water more vigorously for a short time and then slowly (two minutes per gallon) and checked for salty water from the outlet of the softener.  When I got very salty water I shut off the flow and let it sit for an hour.  I repeated this a couple more times.  When I took the filter housing off there was very little salt left in the bottom.  I rinsed it out, reinstalled it, and ran water through the unit at the rate of four minutes per gallon for one hour, figuring 15 gallons of filtered water should be enough to flush the saltiness out of the softener.  I tested the discharge water from the softener and it measured somewhere between zero and 1.5 gpg TH.  It should have been zero, but I do not know if the test strips are sensitive to residual salinity.  This process took all afternoon, intermixed with my computer and bus waxing work.

I had granola with fresh blueberries for lunch and then finished yesterday’s post and started this one.  I settled in to work on photographs for my article with periodic breaks to check the water softener.  It was more sunny than cloudy from noon to 2 PM at which point the clouds thickened and filled in.  The air was warm but not hot and the conditions were ideal for cleaning/waxing the “sunny” side of the bus.  That is what I did until 5:45 PM, with a short break to talk to Linda on the phone.  I should be able to finish the waxing tomorrow, put a second coat of Carnu-B Coconut Creme on the passenger side tires, and put a first coat on the driver side tires.

I cleaned up all of my supplies and materials, washed up, and had a few corn chips and hummus as an appetizer.  I washed some red grapes for later and got out an orange.  I have a lot of grapefruit and oranges on board at the moment and try to at least one of each every day.

This was a very dramatic sunset.

This was a very dramatic sunset.

Speaking of oranges, Barb has been using a pair of products from Touch of Oranges; Touch of Oranges Wood Cleaner & Re-conditioner, and Touch of Beeswax Wood Preserver; http://www.TouchOfOranges.com.  I went to their motorhome yesterday to see how it works and the results were quite impressive.  I thought about ordering some but decided not to for several reasons.  For one, we already have Murphy’s Oil Soap Wood Cleaner on board.  It has orange oil in it and I would like to do a side-by-side test.  For another, we are getting too close to our departure date to risk a delayed delivery.  Finally, we don’t have time to use it before we get home anyway.  I might order some in May if I like the way it works better than the Murphy’s product.

I made a fancy salad for dinner.  We bought a large container of mixed salad greens on Monday and I need to have salad every day in order to use it up before it goes bad.  I found carrots and mushrooms in the fridge that needed to be used, so those went on the salad along with dried fruits, peanuts, Daiya pepper jack “cheese” and other yummies.

I continued processing photos after dinner.  By 10:30 PM I was too tired to concentrate and went to bed.

2015/02/21 (S) Facetime with Madeline

I was awake off and on starting at 6 AM and finally got up at 7:15 AM.  The Yuma Hamfest started yesterday and runs through tomorrow but I have too much to do here to spend three hours driving just to window shop.  Besides, Butch had to leave early this morning for a rock and mineral swap meet to try selling some of the equipment they have purchased and decided not to keep.

I did not have coffee yesterday so that was my second task this morning.  My first task was getting the cats their food and water and cleaning their litter tray.  I had granola with raisins and fresh blueberries for breakfast and then sat and enjoyed my coffee while Jasper sat beside me on the couch and groomed himself.

The sunsets in Q were usually good but this one was better than usual.

The sunsets in Q were usually good but this one was better than usual.

It was cool again this morning with a thin cloud layer so as soon as I finished my coffee and checked my e-mail I got to work on the outside of the bus.  That was at 9:15 AM.  It took me until 11:45 AM to finish the passenger side of the bus and apply a coat of Carnu-B Coconut Creme to the driver side tires.

I finished the hummus for lunch with the help of a few Fritos corn chips.  Afterwards I called Jeff to check on our coffee order.  He said it was in the mail but went out a few days later than expected.  He said he expedited the shipping because of that and was supposed to e-mail the USPS tracking number to me.  I then went over to Jim and Barb’s rig and asked if I could test their Touch of Oranges products.  Barb lent me both the wood cleaner/restorer and the beeswax wood preserver along with pieces of terry cloth for each and a piece of 0000 steel wool.  I set those aside and worked on my Quartzsite 2015 article for a while.

I took a break from working at my computer to test the cleaning products.  Following the directions, I sprayed the left side of the kitchen base cabinets with the cleaner/restorer, waited two minutes, rubbed it with steel wool (with the grain), and wiped it off.  I then applied the beeswax preserver with a piece of terry cloth and let it sit for one hour.  While the beeswax product was soaking in I went over and visited with Butch and Fonda.  While I was doing that I got a TXT message from Linda asking if I wanted to Facetime. That meant she was back at the house and had grand-daughter Madeline with her.  I indicated that a little bit later would be better.

My one hour wait was up so I excused myself, went back to my coach, and wiped down the left side of the cabinet.  I then used the Murphy’s Oil Soap Wood Cleaner (with orange oil) on the right side of the cabinet.  The results did not compare favorably with the Touch of Oranges products which definitely improved the appearance of the wood.

I turned on our Verizon MiFi, switched my iPad to it, and then called Linda to set up the Facetime session.  Either I never configured the Facetime app or failed to reconfigure it but it would not let me log in.  Once I got the correct e-mail address and password set up it worked fine.  I called Linda’s iPad and when she answered I got to see Madeline.  When Linda picked her up earlier today Madeline said she was going to grandma and grandpa’s house to see grandma and grandpa.  Linda explained that I wasn’t at the house but Madeline could still see me in the bus using the iPad.  It is a fabulous technology, and fascinating to see how completely natural it is for a 2-year old.

I have enjoyed creating panorama images this winter using MS-ICE.

I have enjoyed creating panorama images this winter using MS-ICE.

Bill Stewart from our FMCA Freethinkers Chapter had requested to see some photos from the recent gathering at the Peg Leg boondocking area near Borrego Springs, California.  Last night I selected seven images, re-sized and processed them, uploaded them to the Freethinkers folder in my Dropbox, generated the “share” link, and e-mailed it to our open forum e-mail reflector.  While I was working on that it occurred to me that Lou Petkus is always looking for images for the SKP Photographers BOF newsletter and member album and I had not sent him anything in a while.  I was too tired by then to do the work so I put that on my “to do” list for today.

I spent most of the rest of the afternoon and evening working on my article and the photos that go with it except for a break to photograph a beautiful sunset.  Linda called around 6 PM (8 PM at home) to chat.  She suggested that we wait to see if someone at Escapade is selling the Touch of Oranges products.  She also suggested that I check to see if Carnu-B is going to be at any car shows near us as they sell the product for a lot less at shows than they do online.

I took a break for dinner and microwaved a jumbo tofu hotdog and a potato.  The potato had started sprouting so I figured I needed to eat it or plant it.  I had been accumulating dishes and utensils for the last few days so I washed, rinsed, and dried all of them.  By the time I finished my chores, played a few games on my iPad, and finished this post it was midnight.  Completing the waxing of the bus was an important milestone, and although I have a lot more to get done on the bus this coming week I plan to take it easy tomorrow and try to wrap up my Quartzsite 2015 article and perhaps some other writing.  The most I may do to the bus is apply some more Carnu-B Coconut Creme to the tires.

2015/02/22 (N) Q 2015

I did not use up the second package of blueberries fast enough and they started to go bad.  I picked out the bad ones, rinsed off the rest, and had some granola with my blueberries for breakfast.  I worked for a little while finishing up yesterday’s blog post and then got to work at my computer.  It was cloudy and windy when I got up and the winds continued to strengthen during the day.  I had closed the vent fan domes last night so I would not have to listen to them rattle.  The patio awning was flapping more than I liked so I got Butch to hold the strap while I released the rafters and then rolled it up and latched it.  I was able to retract the small passenger side bedroom awning by myself.  In the light of day I discovered that I had not wiped the Carnu-B wax off of the body as completely as I thought.  That, however, will be a task for another day.

I wanted to make a sandwich for lunch but I was out of onion so I went to the Road Runner Market to get one.  I also wanted pretzels and hummus.  They did not have any hummus and they did not have the kind of pretzels I like but I was able to get two large sweet onions.  Sourdough bread with Tofurkey brand mock deli slices, Daiya cheddar “cheese” slices, veganaise, honey mustard, fresh onion, and salad greens made a tasty treat.

I finally finished my Quartzsite 2015 article for Bus Conversion Magazine, including the 95 photos and captions, and uploaded it to my Dropbox for proofreading.  I had an e-mail back from Gary indicating that they would probably use it for the February issue, so very late this evening I uploaded all of the photo files.

A panorama created using MS-ICE from handheld images.

A panorama created using MS-ICE from handheld images.

About the time I needed to take a break Fonda left for church and I saw Butch sitting outside with his camera.  Another beautiful Quartzsite sunset was taking form so I grabbed my camera and shirt jacket and went out to join him.  It had been cloudy and windy all day and was rather brisk.  We both worked the sunset until it was played out and got some nice photos considering that they were all handheld in low-light conditions.

For dinner I made a Thai Kitchen Noodle Bowl and added some honey roasted peanuts.  I closed all of the bus windows to a crack and made some hot tea.  Tea is still my beverage of choice with any type of Asian cuisine and was very satisfying on a chilly evening.

With the Quartzsite 2015 article done (except for corrections) I started pulling together the “featured bus” article on Byron Pigg’s 1985 Model 15 Eagle bus conversion.  I went through the photos I took last month of his coach at the Eagles International Bus Rally and was pleased that I had a good variety with good technical quality to choose from.  I made my selections, post-processed all of them, and inserted the small versions into the Word doc.  The article narrative itself was less than one page in length as I do not know very much about Byron and his wife Betty or their bus.  The Word doc template I use for featured bus articles includes two “Specifications” pages, one for the bus and one for the conversion, so the article was three pages.  I e-mailed the Word doc (with embedded photos) to Byron and cc:d Gary at BCM.  In order to complete the article I need Byron to fill in a lot of the details about his bus and conversion.

2015/02/23 (M) Seizure

Toast with apricot preserves is as close as I get anymore to the Danish pastries that were once one of my favorite treats, but I am OK with that.  I am absolutely enjoying retirement more as a result of being much healthier and more active, both of which are a direct consequence of eating better, weighing less, and not having to take a cocktail of drugs every day.  Toast, coffee, and a little fruit juice makes a very agreeable breakfast.

I finished up yesterday’s blog post after breakfast and then got into my computer-based work.  I had planned to work on the photos of Larry and Carol Hall’s GM PD4106 bus conversion and write a brief narrative, similar to the one I did on Byron and Betty’s Eagle bus, but other things kept interfering with the work.  Except for lunch and dinner breaks, and brief chats with Barb, Butch, and Fonda, I sat on my butt most of the day working away at my computer on a template for featured bus articles but had very little to show for it at the end of the day.

I have learned over the years to stick with sunsets until it is dark.

I have learned over the years to stick with sunsets until it is dark.  Panorama stitched together with MS-ICE.

For lunch I had the last jumbo vegan hotdog in the open pack.  They microwave nicely, so they are quick and easy to fix, and are so yummy with honey mustard, pickle relish, and chopped sweet onion.

I had not yet seen the e-mail from Jeff at Teeko’s Coffee and Tea in Howell, Michigan with the USPS tracking number for my coffee order so I call them at noon (2 PM EST) and Mary gave the number to me over the phone.  It only occurred to me much later that the e-mail may have gotten trapped by our spam filter.  I direct all of the notifications from the spam filter to a special inbox and I have not made a habit of checking that inbox or going into the filter to release or delete the e-mails that are being held.

Butch and Fonda drove over to Bouse this morning to talk with the General Manager and park managers of an RV Park about working there next season.  They stopped at our shared P. O. Box on their way back and then went to the main office downtown.  When they got back to camp they had my coffee shipment and an envelope from Dan Fregin, the treasurer of our FMCA Freethinkers chapter.

At one point in the afternoon I looked out the picture window by the dinette, where I sit and work at my computer, and Roho was lying on the ground with Jim and Barb and Jim L. gathered around him.  He appeared to be twitching and Barb confirmed that he was having a seizure and typically has one once a month like clockwork.  We had a dog with Epilepsy (Scout) and it did not turn out well.  The standard treatment at the time (18 years ago?) was phenobarbital, the same drug used to control the condition in humans.  Scout did not respond to small doses and the amount we had to give him eventually destroyed his liver.  But we had no choice; he went into a grand mall seizure one night and would not come out of it.  We had to take him to an emergency veterinary clinic at 2 AM and they had to inject him with phenobarbital and something else to get the seizure to stop.

We had just started him on an experimental treatment using potassium bromide (KBr) dissolved in flavored pancake syrup when his liver failed and he died.  I told Barb about this but I did not know if the KBr treatment had become standard practice or not.  The apparent effect of the KBr was to mediate the uptake of the phenobarbital, allowing much smaller doses to be much more effective.  I searched online later and found that KBr has, indeed, become part of the standard treatment arsenal for canine and feline seizures.

For dinner I made a big green salad.  While pulling ingredients out of the refrigerator I found a bunch of asparagus that was spoiled so I threw it out.  That was too bad because I really like asparagus and this bunch probably came from the farmers market where we have bought very good produce.  I also had to throw away some blueberries and carrots this week but managed to salvage some of each.  I did, however, finish up the mushrooms in my salad.

Atmospheric conditions make all the difference in sunrise and sunset photography.  Panorama stitched with MS-ICE.

Atmospheric conditions make all the difference in sunrise and sunset photography. Panorama stitched with MS-ICE.

Linda called around 7 PM (my time) and we brought each other up to date on how our days went.  Around 8 PM I prepped the remaining strawberries for later and then heated an Amy’s vegan tamale with Mexican rice.

I finally put aside the featured bus article template I worked on much of the day and started selecting and processing the photos for the article on the Hall’s bus.  By that point, however, I was tired and frustrated and making mistakes so I went to bed.  The southerly winds that brought the rain had shifted to the northwest bringing cool, clear air with them.  It had cooled off enough in the bus that I turned on the electric heating pad for the first time in quite a while.

 

2015/02/14-18 (S-W) Busy Times in Q

20150214 (S) The Lights of the City

Note:  There are no photos for this post.

We stuck around Q today.  While driving through Borrego Springs yesterday afternoon we came upon the Sea View roadside fruit stand.  It was on the northeast corner of an intersection north of town surrounded by citrus and palm orchards.  The stand had 5 pound bags of tangelo oranges and 10 pound bags of jumbo grapefruit for $3 per bag; self-serve.  We stuffed $6 in the collection box and took one of each.  We had grapefruit for breakfast this morning and several oranges throughout the day.  After breakfast Linda went for a morning walk and I settled in to work at my computer on Bus Conversion Magazine articles.

We had planned to drive to Sara Park in Lake Havasu City mid-afternoon for the Western Pyrotechnic Association fireworks show but decided we would go tomorrow instead.  We were tired after our whirlwind 2-day visit to California and did not feel like making the 150 mile round trip.  Larry and Sandy drove up to see the show on Friday evening and said it was spectacular.

For dinner Linda made pan-roasted Brussels sprouts with balsamic vinegar and honey, quinoa, and mashed Romanesco brocciflower with salt and pepper.  A small glass of white wine completed the meal, which we ate outside, and it was all delicious.

We had just finished eating when Butch and Fonda brought their chairs and their dogs over.  They have gotten deeply involved in the Quartzsite Road Runners Gem and Mineral Club and we have been busy with travels so we have not had as much opportunity to chat as when we first got here.  We sat and talked until long after the sun set.  It still cools off here when the sun goes down but not as quickly or as much as it did in December and January.  With proper clothing or a light blanket we can now sit outside well into the evening.  Even with the lights of the city the stars are bright and numerous.  Once we came inside we did our usual evening things for a while and then went to bed.

2015/02/15 (N) Winterfest 2015

We had a quiet morning at home that included the last of our Ethiopian Yirgacheffe coffee beans and some of the grapefruit we bought on Friday.  One of the couples we were visiting with on Friday, Steve and Liz Willey, started, owned, and operated Backwoods Solar in Idaho for many years.  They sold the business a few years ago but they still carry copies of the Backwoods Solar Planning Guide and Catalog when they travel.  Much of the information in the planning guide section was written by Steve and he gave me a copy of the 2014 edition.  We had exchanged several e-mails about a solar system for our bus so he knew I was interested in the subject.

I spent the entire morning reading through the Backwoods Solar book while Linda checked up on the state of the world, the weather back home, and, finding no good news, went for a walk.  I checked my e-mail at 1 PM and then started getting ready to leave for Lake Havasu City at 1:30 PM.  Today was the final day of the Western Pyrotechnics Association 26th annual conference which was also billed as Winterfest 2015.  The gates opened at 3 PM and we wanted to be there by then so we could get a good spot for our chairs.

The ground displays were set up in the infield of the small Havasu 95 Speedway.  Like most race tracks it had a high, curved fence surrounding the track.  We entered from the east and by bleachers that were there facing west towards the mountains and, way off in the distance, the Colorado River.  To either side of the bleachers were large areas where spectators could set their own chairs.  We put ours to the left up against a border fence designed to keep spectators about eight feet back from the track fence.  The aerial displays were launched from beyond the other side of the track.  That area sloped downhill away from track so that the firing stations were not visible.

The sky was clear, the air temperature was warm but not uncomfortable, and the sun was hot.  We brought a lightweight blanket to protect us from the chilly night air that would inevitably occur after sunset but we hung it on the fence as a sunscreen which kept the sun off of our legs.  Although our Tilley hats could shade our heads and faces, we also had two small umbrellas that we brought just for this purpose.  With all of our sun paraphernalia in place we relaxed, snoozed, and waited which was actually a very pleasant way to spend the afternoon.

We eventually got hungry.  Given that the venue had food vendors and bathrooms we did not have a reason not to eat.  Our choices were popcorn, soft pretzels, and veggie burgers with lemonade to drink.  Unlike a lot of closed venues, the food was not overpriced and all of the workers looked to be high school age.

Just after 6 PM the sun slipped behind the small mountain range nearest to the track and we put our umbrellas away and took down our blanket.  Although it was still daylight the crews started shooting off small aerials sporadically.  By 7 PM the sun had set and there was a beautiful glow along the distant mountains.  By 7:30 PM it was dark and the fireworks got started in earnest around 7:40 PM.

A local radio personality served as MC.  Being a Western Pyrotechnics Association event it was different from other fireworks displays we have seen over the years.  Before the main (commercial) display began they shot off shells and ground displays that had been made by WPA members in workshops during the four days of the Association convention.  They were shot off (or lit) one at a time and the MC announced the name of the builder and type of firework.  Most of us just watch a fireworks display and say “ooh” and “ahh” at the appropriate times, and maybe clap for a particularly impressive burst.  Not surprisingly, however, the things we are watching all have names.  Indeed, pyrotechnics has its own specialized vocabulary but most of us are never exposed to it.  It made for an interesting as well as entertaining evening.

As the evening went on the air temperature cooled off and the fireworks heated up.  We put on our shirt jackets and threw our blanket over our legs.  The two professional displays were done by the Not Yet Ready For Prime Time Players and AM Pyrotechnics.  The NYRFPTP show was all done from the infield and was very interesting.  The AMP show was all large aerials that were shot one at a time.  The main reason for this was so the buyers in attendance could see each shell by itself, but it had the same benefit for the other spectators and had the added benefit of extending the show without overloading the senses.

When the main show was finished around 8:30 PM most of the audience left, but WPA members were instructed to come to the launch areas and finish shooting off their products.  Some people sitting next to us had advised us to stick around, so we did.  By 8:45 PM more fireworks were being launched and lit and that was still going on when we finally packed up at 9:30 PM and headed back to the car, which was parked right by the entrance to the track.

There was a soundtrack but the fireworks were not synchronized to it.  Perhaps the best part of the evening was that we were much closer to the ground displays and launch sites than is usually the case at a major Fourth of July celebration.  One of the “effects” was a “wall of flame” that was set off on the far side of the track.  I do not know what they used for fuel but we felt the heat where we were sitting!  An interesting side note was that the larger aerial “bombs” (technically “salutes”) kept triggering car alarms.

We drove home in the dark but it was not our first time driving this route and traffic was light at that hour.  We got back at 11:15 PM, checked e-mail, and headed off to bed.  If we are back in this area again at this time of year we would likely position our coach closer to Lake Havasu City and attend the fireworks display all four nights.  As with many other things this winter it was a new and unique experience.

2015/02/16 (M) Travel Preparations

With the Western Pyrotechnics Association fireworks display last night at Sara Park in Lake Havasu City our sightseeing and tourist activities in and around Quartzsite came to an end.  Linda is flying home tomorrow for two weeks to deal with corporate accounting and both corporate and family tax returns.  That meant today was spent getting her ready to leave and me ready to have her gone.

After our usual coffee, juice, and granola breakfast we drove to the Albertson’s supermarket in Blythe, California to stock up on grocery items for me.  We bought lettuce so I can make salads, but we bought a lot of prepared/packaged vegan foods that do not require much cooking time or technique and have minimal cleanup.  While Linda has a lot to do back home I also gave an ambitious list of things I want to accomplish while she is away.  I also want eat well while she is away, but I do not want to spend a lot time cooking and cleaning up.

At the top of the list are six or seven small, but critical, bus projects.  Right behind those is to finish cleaning and waxing the passenger side of the bus.  We have acquired a certain amount of “stuff” since we got to Q and it needs to be organized and stowed for travel, after which the inside needs some deeper cleaning.  After that it’s continuing to catch up on blog posts and working on drafts of articles for Bus Conversion Magazine.

When we got back and had the groceries stored Linda started a load of laundry and began gathering up her stuff for the flight home tomorrow while I worked on programming our new TireTraker TT-400C monitor and re-installing all of the sensors on the tires.  Our original monitor had a charging problem and Daryl Lawrence mailed a replacement to us along with a charging cable.  It arrived on Friday and Butch picked it up at the Post Office and gave it to me on Saturday morning.  I tried all of the possible combinations and verified that the original charging cable was fine but the original monitor was not.  We will return the old monitor and cable to Daryl and Cheri at Escapade in a few weeks.  The driver side front tire was giving a low pressure alarm so I checked the pressure with my digital gauge.  It was 97 PSI (it is supposed to be 115 PSI).

The Dewalt air-compressor was already out of the car and secured to the fence along the north property line so I plugged it in, got the air hose out, and filled the tire back up to 115 PSI.  I was going to check/fill all of the driver side tires, since they were in the shade, but I really needed to do that in the morning when the temperature was near its overnight low and before the sun stared to warm up the passenger side of the bus.  I may do this Wednesday, just to get them close to right, and will do it again on Monday, March 2nd so we are ready to leave on the 3rd without too much to do other than pull out and hook up.

When I was done with the TPMS we trimmed our two cats’ claws, which were overdue.  This has been a “mañana” task for a while but finally became a “hoy” task when we ran out of days.

I called Buck Bolding to see if I could stop by his place tomorrow on the way back from dropping Linda at the Phoenix airport.  Buck and his wife, Pat, were at the Eagles International Rally last month in Quartzsite with their gorgeous Eagle Bus Conversion and we discussed having me photograph it for a Bus Conversion Magazine featured bus article.  Buck remembered the conversation but unfortunately this was not a good week for him for this project.  He and Pat hope to make it back to Quartzsite yet this month.  If so, they will probably stay at the Quail Run RV Park just north of us on Central Avenue (AZ-95) which would be very convenient for me.

Linda and I sat on the north-facing porch of Joe and Connie’s park model trailer to escape the sun and enjoy the light breeze that was blowing.  Barb stopped by for a while and then retired to her motorhome.  Fonda came over to show us the small opal she spent part of the day grinding and polishing.  She went back to her bus and Butch cane over followed by Larry and Sandy.  We discussed and compared the WPA fireworks display they saw on Friday to the one we saw last night.  They returned to their motorhome and Linda went over to talk to Fonda leaving Butch and me to sit on the porch and solve all of the world’s problems.  While we were doing that Linda and Fonda decided we should all go out to dinner at Crazy Jerry’s.

We had our usual 12″ pizza–thin crust, no cheese, with mushrooms and onions–and a side order of French fries.  Our waitress was Michele and we had a nice chat with her about the restaurant and the town of Quartzsite.  She and her husband own both the Main Street Eatery and Crazy Jerry’s.

When we got back to our coach Linda finished gathering up her stuff.  All she has to pack in the morning are her computer, power supply/charger, and iPad.  We were in bed by 10 PM and set the wake-up alarms for 6 AM.

2015/02/17 (T) Fly Away

We were awake before 6 AM but stayed in bed waiting for the wake-up alarms to go off.  Linda set one on her iPad or phone, I’m not sure which one, but it did not go off.  I set the alarm on the panel mounted click by my side of the bed and it did go off.  Linda prepared herself for traveling and packed up her iPad, computer, charging cables, and other electronic paraphernalia without which modern life would be unbearable at best and impossible at worst.  I did not make coffee and we did not have breakfast as the Phoenix Airport was a two hour drive with limited rest stops.

We had targeted a 7 AM departure but by 6:40 AM we were ready to go.  Linda’s “suitcase” was a zip top nylon bag that I got at a conference some years ago.  Everything she had with her, except her down coat, fit in that bag or in her computer bag.  We pulled out at 6:45 AM, made our way through town to Exit 17, and got on I-10 going east.

We made good time as the speed limit on I-10 away from major cities is 75 MPH, allowing me to travel comfortably at 68 MPH.  We got to watch night give way to dawn give way to the sunrise and then daylight.  Once the sun was up driving was more difficult until it rose high enough in the sky that our sun visors could do their job.  Traffic was light heading eastbound but there was a steady stream of trucks headed west.  We made good time, even as we entered the Phoenix metropolitan area, until we were about 12 miles from the airport where traffic came to a standstill across all six lanes.  The GPS indicated heavy traffic ahead and one hour to reach our destination.

We had planned to drop Linda at the terminal at 9 AM, two hours before her scheduled departure, so a one hour delay would be cutting it too close.  Linda grabbed the atlas (so glad we brought it along) while I moved to the right hand lane.  There were major surface streets paralleling I-10 to the south so I exited the Interstate, drove down to the first one, and turned left to continue our eastward travel.  It moved a long reasonably well and eventually put us on I-17 southbound, which almost immediately curved eastbound.  About five miles later we intersected I-10, headed north, and took the airport exit 1/2 mile later.  From that point we just followed the signs for Terminal 3 which is the one that Delta Airlines uses.

As we were driving through the airport I got a phone call.  I dug my phone out of its case and handed it to Linda.  She said it was identified as possible spam and declined the call.  She set my phone in the console between the front seats and we pulled up to the departure curb at Terminal 3.  She took off the light jacket she wore in the car, grabbed her two bags and her down coat, gave me a quick kiss, and trotted off into the terminal.  I pulled away and before I got to the turn-around to get back to I-10 reached for my phone only to discover it was not there.

A missing phone is a sickening feeling, on a par with a missing wallet.  I searched around as best I could while driving and could not locate it.  I thought that Linda might have inadvertently taken it with her.  If so, my hope was that she would discover the mistake when she went through security and head back to the curb to look for me, realizing that I would be looking for her.  I circled through the terminal road system for 20 minutes but she never appeared.  As inconvenient as it would have been for her to take it with her, she could have shipped it back to me overnight.  My worst fear was that it fell out on the ground at the airport, in which case the best (?) I could hope for was that someone ran over it and rendered it unusable.  I should have found one of the cell phone lots and done a more thorough search of the car, but if it wasn’t in the car there wasn’t anything I could do about short of finding a pay phone, and when/where was the last time/place you saw one of those?

I circled the terminal one last time and then followed the signs for I-10 west and headed for Quartzsite.  Phoenix has an extensive highway system, which always has its own complexity, but the traffic was ridiculous.  We avoided Phoenix on our way to Q, using I-8 and AZ-85 to bypass the “big city.”  We will be avoiding it again in a few weeks when we relocate to the Casa Grande area and then to Tucson.

I remembered seeing a QT (Quik Trip) filling station and convenience mart on the west edge of town when driving in this morning.  Their listed price for Regular gasoline was $2.099, cash or credit.  I could have made it back to Q on the fuel in tank but why risk running out, especially given the price?  I exited the Interstate, used the facilities, and bought a cup of coffee.  This QT had the fanciest coffee and tea self-serve area I have ever seen.  I topped off the tank with some inexpensive gasoline, cleaned the windshield, and continued on my way.  I also found my phone, which had not been placed in the center console like I thought, but just in front of it, allowing it to slip down in front of my seat where I could not see it while driving.  Whew.  I suddenly felt a lot better.

With the delay getting to the airport, the added time driving around the airport, and the stop for fuel I got back to our motorcoach around noon instead of 11 AM.  Butch and Fonda were outside contemplating what appeared to be all of their worldly possessions which were arrayed on and around their patio.  Butch was studying his new VDO electronic speedometer, a 437-152 just like mine.  All of the printed directions referred to using a 12VDC power source but the instrument case said “12/24V”.  Chuck Spera and I have both installed this exact same model gauge in our Prevost H3-40s and my recollection was that we had them wired to 24VDC ignition switched sources.

Butch put in a call to VDO technical support (Continental) and I called Chuck.  He did not recall even checking the voltage and just used whatever was there.  I was almost certain that I had checked the voltage and it was 24VDC, which is why I wired the two 12V light bulbs in series.  Butch got a call back from VDO verifying that the gauge would work on either voltage while I had a long chat with Chuck in which he brought me up-to-date on their winter at Pelican Lake Luxury Motorcoach Resort in Naples, Florida.

Chuck mentioned that Prevost Community is having a “non-rally” rally April 17-20 at the Bella Terra Luxury Motorcoach Resort near Gulf Shores, Alabama.  There is no rally fee and they negotiated a special group rate of $35/night.  That may be a bit late in April for us to be that far south, but maybe not.  We would like to be home by May 1st and we would like to visit family in St. Louis on the way.  I-55 starts at I-10 just northwest of New Orleans and Bella Terra is an easy day’s drive from there.  Chuck said there is an Indian Casino on Lake Charles that has an excellent RV park for $13 per night that might be a good stopping spot for just before/after the rally.  He also mentioned that there is a thread on the POG forum about bus barns.

I made a nice, large salad for dinner, had a small glass of wine, and turned in early.  I plan to start on cleaning and waxing the passenger side of the coach in the morning.

2015/02/18 (W) Wax On, Wax Off (Continued)

Today was my first full day without Linda here.  This how it went.

I set my alarm and got up at 6 AM.  I made coffee and had the raspberry pastry bites for breakfast.  Yeah, they’re vegan, but definitely not WFPB.  I got the trash and plastic bottles ready to take out and then worked on yesterday’s blog post.  It was still dark out so I spent a little time straightening up the inside of the coach.

Once it was daylight I started cleaning and waxing the passenger side of the coach.  I wiped the windshields off (again) and then did the side from the front corner back to the patio awning front support arm.  I worked from 8:30 to 10:30 AM which was a bit too long as the sun was very bright and the body panels were getting quite warm causing the wax to dry too quickly.

I put away my supplies and gathered up my microfiber towels.  I had enough clothing and towels to do a load of laundry and added the microfibers to the batch.  This was the first time I have used the laundry room since we arrived so Barb showed me how to set washer controls.

Whenever I was not doing something else I worked at my computer.  Other than a few e-mails my focus was BCM articles.  In particular I am trying to finish an article on “Quartzsite 2015.”  The article was basically written a couple of weeks ago, but we have done other things since then so I want to expand it a bit.  What I mostly spent the day and evening working on were the photos.

I got the trash and plastic bottles ready and took them to their respective containers.  I let Barb know that I needed to use the car port sometime in the next 10 days.  I want to wash and wax the car and will need to get it in the shade.  When I was done with the laundry I finally ate the grapefruit I got out for breakfast.  I was still hungry so I also had a sandwich for lunch.

I checked the total hardness of the water coming out of the water softener and it was still somewhere between 3 and 7 grains per gallon, indicating that more regeneration was still needed.  First I switched the hoses around and gently back-flushed the unit using filtered water.  I switched it back to the regular configuration and added a 26 ounce container of non-iodized table salt.  I ran the water through the unit until it was noticeably salty and then shut it off and let it sit for 20 minutes.  I repeated this, letting about 10 gallons of water go through the softener each time.  Late afternoon I removed the housing, rinsed out the little bit of remaining salt, reinstalled the housing, and gently ran about 15 gallons of filtered water through the unit to get the residual salinity out if it.  It was dark by then so testing the TH will be a task for tomorrow.

I had several text messages and calls from Linda throughout the day.  One was a photo indicating evidence of mice in the pantry.  Oh joy.  We were gone all last winter, which was bitter cold and snowy, and did not have a problem so we do not know what is different this year.  Linda though that perhaps all of the construction work (landscaping and natural gas) had disturbed the local mice.  Whatever the cause there wasn’t anything I could do about it from 2,200 miles away so I made a nice green salad for dinner and then continued working on photos for my article.

 

2015/01/8-14 (R-W) Q 2015 W2

2015/01/08 (R) Up On The Rooftop 

A panorama from the roof of our bus.  Left edge is NE, center is S, right edge is NW.

A panorama from the roof of our bus. Left edge is NE, center is S, right edge is NW.

As forecast, we woke up to cloudy skies and milder temperatures.  The clouds to the southwest looked like they might produce rain but the winds were blowing gently from the southeast so the rain would not be for us.  This was the day we’ve been waiting for, the perfect kind of weather for washing a bus.  But not first thing in the morning.  Coffee and breakfast come first while we wait for slightly warmer temperatures.

The waste water tank level sensors are not accurate but our fresh water tank sensors are OK.  The fresh water level gauge was showing less than 1/3 tank and the grey water tank gauge was showing full so it was probably time to dump and fill.  When I checked the fresh water level visually we were at 1/6th tank.  I dumped the black water tank and then the grey water tank, both of which were fairly full, and then filled the fresh water tank.  I have the city water regulated to ~50 PSI (static) which drops to ~30 PSI when the fill valve is fully opened.  At that pressure it takes about 40 minutes to fill the tank.

I last dumped the waste tanks on December 30th and added 25 gallons of (hard) fresh water.  On December 31st I added another 30 gallons of (hard) fresh water.  On January 2nd I recharged our water softener, drained about 1/6 tank (~20 gallons) of (hard) fresh water and filled the tank with 120 gallons of soft water.  I checked the hardness of the water coming out of the softener after that fill and it was 1.5 grains/gallon (25 ppm).  I checked it again after today’s fill and it was still 1.5 gpg.  Since we are keeping a log of the dumps and fills I plan to check the hardness after each fill so can regenerate the water softener before it gets depleted and we end up with really hard water in our tank and system.

Butch happened to be at the Post Office Annex today checking the P. O. Box at exactly the same moment a postal worker was about to put something in the box and then stopped because of the forwarding tag.  The “something” was our package of water hardness test strips from Bristol, Indiana and the worker was kind enough to give it to Butch to give to us.  He also learned that they still have P. O. Boxes available so he went to the main post office to find out more about that.  He came back with a form to fill out and it had room for all of our names so the six of us are going to share the box and the cost, which is $56 for six months, or just under $20 per couple.

While the fresh water tank was filling I started getting ready to clean the roof by getting out our Little Giant step/extension ladder and various cleaning supplies.  The dump and fill was done by 11 AM and it was warm enough by then to start working.  Swim trunks, a white T-shirt, and Kean sandals was the uniform of the day.  I carried the hose sprayer up the ladder with me and then lowered it down to use as a hook and lift wash water bucket, scrub brush, and other paraphernalia up to the roof.

It turned out to be sunnier than I had hoped but I worked for about four hours, not including a lunch break, and scrubbed the entire roof.  I used McGuire’s red automotive soap and rinsed thoroughly.  I had already washed the roof once using Dawn dish soap (a big ‘no no’, apparently) and a long-handle soft brush.  That washing had removed surface dirt and revealed the full extent of the dark “spotting” that gave the entire roof a mottled appearance.  The roof looked a lot better after I scrubbed it but a lot of the spotting remained.

We are anxious to clean the sides of the bus but there is no point doing that until we are done with the roof.  We want the roof “like new” clean so dirt doesn’t run off it onto the sides, but we also want it clean because we are seriously considering having Discount Solar (here in Quartzsite) install solar panels and a charge controller and do all the wiring.  As long as we had the hose, brushes, and soap out we decided to wash the car.  It was even filthier than the bus, if that’s possible, and it was nice to finally have it clean.

After cleaning up our equipment I got cleaned up and then sat and visited with Butch for a while.  Linda came over and announced that she wanted me to take her to dinner.  Butch and Fonda decided to go too so we went to Crazy Jerry’s, which is not to be confused with Silly Al’s.  Silly Al’s is supposedly the #1 eatery in Q, at least for pizza, but they have karaoke every night starting at 7 PM.  Thank you, no.  Crazy Jerry’s also has pizza and we tried the vegetarian, hold the cheese.  Very thin crust (the way we like it) and lots of topping.  A couple of side salads and a side order of French fries.  FWIW, we did not eat the entire pizza and brought home the leftovers.

Linda split a pair of Scrabble games with her brother, the first one he has won in quite some time.  She had an e-mail reply from Mara.  She is camped about 70 miles south of Q and is headed here in the near future and is going to camp with the WINs (Wandering Individuals Network).  I checked e-mail, updated my BCM article spreadsheet with two more story ideas, played a few games, and worked on this post before turning in for the night.  We will have been here a month as of Sunday.

The Hi Jolly Daze Parade.  Quartzsite, AZ

The Hi Jolly Daze Parade. Quartzsite, AZ

2015/01/09 (F) The P. O. Box

I left the ladder setup yesterday so I could check the roof again this morning and determine what additional cleaning measures, if any, I might want to take.  I also wanted to get back up on the roof and measure the space we have available for solar panels.  I was expecting two packages via UPS; one from B&H Photo (Manfrotto nodal panoramic tripod head) and one from Sure Marine Service (Webasto repair parts).  I had a nice view of the mountains surrounding Quartzsite from the roof of our bus and wanted to shoot some panoramas with the new head when it arrived.

Butch, Fonda, Jim, Barb, Linda, and I all went to the U. S. Post Office in Quartzsite this morning to sign up for our very own P. O. Box which means we finally have a way to receive USPS mail while we are here.  Just in time, too, as Q has really filled up in the past week and there is more to come.  I have an FMCA national education committee meeting on Monday and need to write a few items for a member survey and review other materials.  Gary (from BCM) is also due to arrive on Monday, and both Curtis (from RVillage) and Mara Culp (HFH build acquaintance) may be headed this way as well.  I believe Chris Dunphy and Cherie Ve Ard of Technomadia are already in the area.  The big RV tent is up and those vendors are arriving and setting up.

Once we were done at the post office I went to Discount Solar to discuss a possible installation on our coach.  The Kyocera panels are 26.5″ W x 59.0″ L.  They are “12 V panels” but are rated at 140 Watts putting out 7.9 Amps.  They cost $350 each.  Those numbers compute to an output voltage of 17.5 VDC and $2.50/W.  (If a 140 Watt panel was operating at 13.8 Volts it would produce just over 10 Amps.)  Because we have a 24V battery system we would need to install the panels in series-connected pairs.  The preferred installation for the rectangular panels is to have the long dimension lined up fore-n-aft to either side of the centerline of the roof.  Tilt mounts are available ($45/panel) but we would probably not install them due to the difficulty of getting onto our roof to use them.

“12 volt” batteries typically charge at around 13.8 to 14.1 volts.  Our “24V” system charges at 27.6 to 28.2 volts and a series-connected pair of panels produces 7.9 A at 35V (full sun) for 276.5 volt-amps, which is essentially “watts.”  Two pairs would produce 15.8 A (553 V-A), and three pairs would produce 23.7 A (829.5 V-A).  The higher voltage output of the panels is reduced and regulated by a solar charge controller before getting to the batteries.  Discount Solar carries Blue Sky and Trimetric maximum power point tracking (MPPT) controllers and the Blue Sky Solar Boost 50 would handle three series-connected pairs for about $550.  The MPPT controllers are DC-to-DC converters so they convert the excess voltage into additional current.  With full sun this six panel system could supply up to 30 A of charging current at the proper voltage, which is why we would need an MPPT controller that can handle more than 30 A of charging current.  We would also want room for expansion or replacement with higher wattage panels if they were available at some point in the future.  One of the nice things about the solar system is that it would always be on and would “play nice” with our other charging systems. Another nice feature is that they are silent when operating.  Ahhhh.

Because of the size of our house battery bank (400 A-Hr at 24 VDC) and the fact that we have a residential refrigerator, auxiliary air-compressor, and other AC loads, we would need/want at least six panels.  (I have not included the four Group 31 wet cell batteries that are used to start the engine and power the chassis as part of the solar system.)  If the batteries were discharged 50% (200A-Hr) it appears that it would take just under seven hours to bring them back to full charge based on the 30A charging current.  In actuality it would take longer in a boondocking situation as the sky is not always clear, the sun is rarely directly overhead (perpendicular to the panels), there would be devices using some of the energy, and the amount of current the batteries can accept falls off as they get closer to being fully charged.

Installation is $90/hour plus mounts ($15/panel), wire, connecting blocks, and other parts, and would take 4 – 5 hours to complete.  The owner assured me they would have it in and out in one day so we could be back in our parking spot before dark.  The last three weeks of January are the busiest time of year for Discount Solar and since we are plugged-in to shorepower we do not need the solar system right away.  If we have it installed in early February we would have a month to make sure it works and resolve any problems.  The system would cost about $3,300 installed.  We have at least a month to think about it.

When I returned to our coach Linda was out walking.  When she got back I went up on the roof with a tape measure to see if/how the solar panels might fit.  With a four-n-aft orientation we could put two towards the front outside edges, one just aft of the kitchen skylights on the driver side, and one aft of the hall skylight on the passenger side.  We could put two more somewhere in the rear.  The options for the rear appeared to be inline (almost touching) on the driver side starting just behind the bathroom skylight or putting one there and the other one sideways across the back just ahead of the dropped portion of the roof and aft of the bedroom vent fan.  Placing the panels in these locations would leave the center of the roof open so I could climb up on the driver side front and walk all the way to the back.

Barb stopped by to let us know there was a mattress in the house (park model trailer) if we wanted to try it out.  It had been in their rig for about two years until they removed it yesterday and replaced it with a thicker one they got from Connie.   It is a regular queen size mattress about 6″ thick, so not one of the oversized behemoths that have become the norm.  They also had a 1.5″ thick memory foam pad to go on top of it.  We took a look at it and decided to give it a try.

We have been using our old Select Comfort adjustable air mattress in the RV since summer 2013.  One side (mine) has a slow leak so I have to adjust it every other night.  I could live with that indefinitely but what we really dislike about it, and have for a long time, is that we tend to roll into the center or off the edge.  It also takes up valuable storage space under the bed for the pump, has wires and hoses to deal with, and has a controller for each side.  We were definitely ready to try something else so we stripped the bed, disconnected the two air hoses, and carried the mattress out of the bus.  It was surprisingly heavy and bulky for an air mattress and lacking in self-supporting structure, but that also made it easier to bend it around the front passenger seat, down the entry stairs, and out the door.  We stored it in the bedroom of the house trailer pending a final decision about the replacement mattress.

We carried the new mattress in, which was definitely easier than getting the old one out, and got it positioned on the plywood bed platform.  We put the memory foam pad on top and put our mattress topper over that which added another inch.  We put our electric heating pad on and then the sheets and the blanket.  We will try it out for a while and if we like it we will see if the Salvation Army wants the old one.  If not, it may end up at the Quartzsite dump as we really do not have any way to get it home or a reason to do so.  We will leave the pump, hoses, and controllers under the bed until we decide on its final disposition.

The suspension on the bus had settled slightly in the driver side rear since we parked and leveled it almost a month ago.  It would not have been enough to require an adjustment except that our bed sits crosswise with the head on that side and I find that sleeping with my head even slightly downhill is not comfortable.  Rather than start up the main engine we got the Dewalt portable air-compressor out of the car and connected it into the brake system fill port in the passenger side engine bay.  I had to connect the chassis batteries and turn the ignition on (without starting the engine) in order to activate the leveling controls, but that allowed me to raise that corner up and get the coach level side-to-side.  At some point we will re-position the bus, but not until I have completed some work on the turbo boost sensor mounting plate and hose and the level low system components for the front end.

We put the air-compressor back in its special storage divider in the car and decided to rearrange a few things so we could put the rear seat down.  Starting next week we will need to be able to carry a passenger.  We thought about heading down to the market area but remembered that we were expecting UPS deliveries.  I started working on two more articles for BCM instead while Linda went for a walk.  It was warmer today and so it was warmer in the coach and I ended up taking a nap.

Our UPS and FedEx shipments usually arrive late in the afternoon or early evening but had not shown up by dinner time.  I had planned to disassemble the Aqua-Hot burner and replace the bearings, nozzle, and perhaps a few other small parts tomorrow but it now appears that will have to wait until Tuesday, assuming our shipments arrive on Monday.  I will likely need to clean the unit as well, given that it has been running so rich, and that may include pulling the combustion chamber.

Linda made two cold salads for dinner; chickpea and wild rice Waldorf.  Both are favorites of ours, especially in warmer weather.  We had some Barry’s Basic Bread with our meal and another glass of Lamb’s Valley organic sweet white wine was a most agreeable accompaniment.

Yup, that's a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

Yup, that’s a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

2015/01/10 (S) Hi Jolly Daze Parade

Today was the annual Hi Jolly Daze Parade.  As first time winter visitors to Quartzsite there was no way we were going to miss this event.  I was up at 7 AM to make coffee and we were done with breakfast by 8 AM.  We checked the parade route online and figured we would go to the Quartzsite Improvement Association grounds as the parade ended in the parking lot there.  It was scheduled to start at 10 AM so we snagged Fonda about 9:40 and headed that way in the car.

When we got to Central Avenue and Main Street the police had Main Street closed so we could not turn left to get to the QIA.  I stayed on Central down to Kuehn Street and took it east over to the exit 19 overpass and back to Main Street.  On the way we saw Lloyd DeGerald’s motorhome parked along Kuehn with a big banner advertising his Aqua-Hot technician services.  I am hopeful that I will be able to repair both of our burners myself but if not Lloyd is the guy I would call, so I was glad to see that he is in town.  But back to the parade.

The police had Main Street closed on that end too.  We knew the parade started at Plymouth Avenue and Quail Trail so we headed in that direction and parked at the Quartzsite Library.  We were surprised that no one else was parked there as it was a short walk from there to the start of the parade route which turned out to be an excellent spot from which to view the parade.  What we realized after we got there was that the west side of Plymouth Avenue was lined with cars from the starting point all the way to Main Street.  I suspect that Main Street was similarly lined with people, most likely in cars, but we were not able to observe that directly.

We had a few drops of rain leading up to the start of the parade.  There were plenty of grey clouds around, but the sun was also shining and the parade did not get rained out.  In fact, a full 160 degree rainbow formed behind the parade and lingered until most of the participants had passed us.  The highlight of the parade was a live camel.

“Hi Jolly” was the Americanized pronunciation given to Hadji Ali, who came here in 1856 as part of an experiment by the U. S. Army in the use of camels.  There are conflicting accounts of his exact place of origin but it seems clear that he came to the U. S. from the Middle East as one of the first, and the lead, camel driver.  For a more complete account check the entry in Wikipedia for “Hi Jolly.”

The experiment did not work out as the Army’s horses, mules, and burrows were apparently terrified of the giant animals and would panic in their presence, but Hadji Ali remained in the U. S. and eventually ended up in Quartzsite where he died in 1902 and was buried in the local cemetery.  We got the impression that he was something of a living legend in his own time and in the 1930’s the governor of Arizona had a monument erected at Hi Jolly’s gravesite.  It is a small pyramid made of local stone with a metal plaque on one side and a metal profile of a camel on top.  According to Wikipedia the monument is allegedly the most visited location in Q.

When the parade was over we returned to our coaches.  Linda went for a walk and I wrote another article for Bus Conversion Magazine.  This was another short one, less than two pages and only 11 photos, on the installation of the new speedometer in our bus.  When Linda returned from her walk she made a broccoli-potato mash.  In addition to the broccoli and the potato it had soy milk, vegan butter, salt, and pepper.  The potatoes were not completely mashed and the dish was both tasty and had a nice mouth feel.

After lunch Linda made a shopping list.  We headed to the Kuehn Street market area and stopped at Barry’s Breads but our timing was bad, again.  We drove south on Central and found the entrance to the parking lot for “the big tent.”  This is where the RV vendors will be in another week or so, but nothing was open yet, so we went over to the Tyson Wells area west of Central Avenue and found some miscellaneous items and a pair of Crocs for me.  For all the shoes I brought I did not have something that was easy on, easy off.  We are parked on gravel and I needed something I could slip on quickly and easily to step outside the coach.

Most of Linda’s list was groceries so we drove to Blythe, California to do our shopping.  To vary our trip and see some new sights we stayed on Kuehn Street heading west past the edge of town where it became West Dome Rock Road.  The road parallels I-10 on the south side for a long way through BLM land and eventually ends at an interchange with the Interstate.  We saw lots of RVs, and a few tents, spread out on either side of the road, but not nearly as many as we thought we would.  There are probably a lot more RVs here than we realize, but the desert is a vast place.

When we got to Blythe we took a few minutes to drive through town and get a feel for the place.  It had a more developed, modern, and prosperous business district than Quartzsite and more houses, as opposed to park model trailers and mobile homes. The houses were not fancy but they were in decent condition.  Schools and municipal buildings were also nice, and there is nothing in Q to compare to the two supermarkets and name brand stores like Auto Zone, NAPA Auto Parts, and K-Mart.  We started at Albertson’s and got most of the items on our list.  We then went across the street to Smart and Final Express and picked up a few things there.  Once again we were not able to find the Silk brand Soy Coffee Creamer, which has us wondering if we last bought it at Wal-Mart in Parker.

When we got back to camp I unloaded the car and Linda put the food away.  I wandered over to say high to Butch and Fonda and play with their dogs, Daffy and Rascal, for a few minutes.  I then went over to say high to Jim and Barb’s dog, Roho, which brought them out of their motorhome and got me invited in.  Linda eventually wandered over looking for me and the four of us had a nice chat.  It was the first time since they got here that I had been inside their rig, a Country Coach Intrigue, and it was very nice.  It has one slide on the front half of the driver’s side, and there is no doubt that it really opens up the interior.  Before we bought our bus we were looking seriously at Country Coach motorhomes (but not their Prevost bus conversions) and the Tiffin Allegro Bus (which is a purpose-built motorhome, not a true bus).  But in the end we were bitten by bus fever and we still have it.

We stopped to visit briefly with Butch and Fonda on the way back to our rig.  Butch has always had an interest in metal detecting and has developed an interest in rocks since arriving in Quartzsite.  If you had the slightest inclination towards rocks, gems, and minerals then being in Quartzsite during the winter would likely push you over the edge into a full-blown hobbyist.  Sometime in the last couple of days Butch bought a used contraption that consists of a table saw, two grinding wheels with a water delivery system, and an electric motor.  He and Fonda acquired a bucket of rocks, including a piece of petrified wood, and they are setting up an area outside their bus to work on their new hobby.

For dinner Linda made pan-grilled tofu slices with caramelized onions and bar-b-cue sauce, but with a twist.  Instead of hamburger buns or slices of bread she heated 12″ tortillas and made wraps.  Of the various ways she has served this simple, but delicious, dish this was definitely my favorite so far.  As much as I like a nice, fresh bun the tortilla wrap kept all of the ingredients contained so that I got onion and BBQ sauce with each bite, and they did not end up all over my plate and all over me.

As we do most evenings, we relaxed, played games, worked puzzles, read, and wrote. We are always a bit surprised at how tired we are after dinner, but we are up and about during the day and the fresh air and sunshine just seem to wear us out.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner.  Quartzsite, AZ.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner. Quartzsite, AZ.

2015/01/11 (N) Swimsuit In January

I turned the lights off last night at 11 AM and was up at 7 AM this morning which seems to have become my current routine.  Because of the new (to us) mattress I was able to get up without waking Linda up.  I turned up the heat in the front of the coach but not the back as Linda does not sleep well in a warm room.  I started getting the coffee ready but did not grind the beans because of the noise it makes.  I worked at my computer on organizational tasks such as copying files to the NAS, copying blog posts from e-mail to Word, and backing up website and photo files to the NAS.

Linda got up around 8:30 AM and set the microwave convection oven to preheat in convection only mode.  When it was ready she heated up the leftover cinnamon raisin rolls she took out of the freezer yesterday and put in the refrigerator.  While the rolls were heating I finished making the coffee.  Although they are not gigantic, one of these rolls would probably be plenty of calories for breakfast.  Two rolls, however, made for a very satisfying meal.  Still, they take about four hours to make fresh and about 25 minutes to reheat.  She makes a batch of eight, so if we each had one for breakfast her efforts would cover four meals instead of two.

Today was another bus cleaning day, but first Linda went for her morning walk while I continued to organize photo files on our network attached storage device.  It was forecast to be a cloudy but mild day and by late morning the clouds had moved in, so when Linda got back we got busy.  Even with the cloud cover it was warm enough that I was able to wear my swimsuit and a T-shirt, my preferred outfit for working with water.  We bought some CLR Mold & Mildew remover yesterday and I tried using it on the lower rear roof.  It did not appear to have any effect so I abandoned any further roof cleaning and we got started on the sides.

The upper sides of our bus are not easy to clean.  Even with our Little Giant extension/step ladder set up as a step ladder at its maximum height I cannot quite reach the top curve of the side walls.  Knowing that was the case I cleaned all the way around the edge of the roof, where it meets the side walls and the front and rear caps, from the roof.  Once I was done with that we took the Little Giant extension/step ladder and converted it from extension configuration to step ladder configuration.

We worked all afternoon until after 5 PM and managed to clean the front and the passenger side.  We wanted to get the passenger side done because it faces south and we wanted to do this on a cloudy day.  Working a section at a time we used McGuire’s red automotive soap, scrubbed with an automotive microfiber sponge, rinsed thoroughly (with Q’s incredibly hard water), and dried with microfiber clothes.  We could not get all of the hard water stains off but it was a lot cleaner, and looked a lot better, than when we started.

The weather forecast for tonight was for heavy rain sometime between 9 and 11 PM with accumulations of up to 1/2″.  For a place that typically only gets 4″ of rain a year that would be a lot of rain for one storm.  We put our lawn chairs, mats, and other outdoor items in the carport for the night just to be safe.  Shortly after 6 PM we had our first sprinkles.

For dinner we had chickpea salad and wild rice vegan Waldorf salad with strawberries and peach slices and some Barry’s Basic Bread with a small glass of Franzia Fruity Red Sangria.  I responded to some e-mails after dinner and deferred work on possible survey questions for the FMCA national education committee until tomorrow.

Linda makes her selections at the Quartzsite Farmers Market.

Linda makes her selections at the Quartzsite Farmers Market.

2015/01/12 (M) E-mail Groups

It has stayed warm enough the last few nights that I have not needed the electric heating pad and we have been able to leave windows slightly open.  We both sleep better in a cool room with fresh air.  The deluge of rain that was forecast for last night did not develop but it was still mostly cloudy when we got up this morning.  After breakfast, coffee, morning puzzles, and checking in with the world we got on with our chores.

My major tasks for the day revolved around preparations for, and participation in, a 2 PM FMCA National Education Committee work session.  While I worked on that stuff Linda went for her morning walk, made an appointment to get her hair cut tomorrow, and made garlic naan (Indian bread) from scratch.  When the phone meeting was over I transferred photographs from my camera to my computer and then joined Linda over at Butch and Fonda’s coach for a late afternoon visit.

Jim L. showed up while we were chatting, read the electric sub-meters, and figured out our bills.  Linda had to write four separate checks to cover our site fee, electricity usage, laundry, and the rental for the apartment, which Jim gave to Barb to cover the cleaning before and after Marilyn’s upcoming visit.  Butch placed an order with PartDeal.com for a VDO speedometer so I had him order a VDO Cockpit Series 0-30 PSI Boost Gauge for me.  The UPS truck also showed up and had the two packages I have been waiting for.  All too soon the sun dropped below the western mountains and it turned chilly so we retreated to our coach.

Linda made curried red lentils for dinner and served it along with the garlic naan bread she made earlier in the day.  Warmed and energized by this fabulous meal I launched into my second major task of the day; the creation of an e-mail group in Microsoft Outlook for our FMCA Great Lakes Converted Coaches chapter.  I got the latest roster from Linda, who is the treasurer, and was able to rearrange it, save it as a CSV file, import it into Outlook, and map it to the standard contact fields.  It was then easy to create a Contact Group and select all of my new entries to go in it.  Once I got the group set up I wrote an e-mail to the members, my first since being elected President of the chapter back in October.  I was up much later than usual, but I got it done.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

2015/01/13 (T) Geekiness

Today was a day for Geeks and geekiness.  Chris and Jim Guld, AKA The Geeks On Tour, arrived in Quartzsite yesterday and are staying at an RV Park not far from our encampment.  Butch knew they were headed this way and after he and I were unable to get EchoLink working on his computer yesterday he contacted Jim to see if he would be willing to stop by and take a look.  Jim is a former network administrator and knows a lot more about stuff like networking, protocols, ports, port forwarding, and proxy servers than we do.  But before he came over Linda and I had breakfast after which she walked over to the beauty parlor and got her hair cut while I worked on a seminar classification task for the FMCA National Education a Committee.

Jim G. arrived on his bicycle around 10:30 AM and stayed for a couple of hours.  He re-checked the things Butch and I had already tried and tried some things we had not, but we could not get Butch’s system to let the EchoLink program connect successfully to the EchoLink servers.  For the record, Butch’s system consists of a Windows Vista laptop that connects to the Internet one of two ways:  1) through a Verizon MiFi or,  2) through a WiFiRanger Go2 into a WiFiRanger Mobile into a DSL WiFi gateway of unknown make and model.  Jim also tried connecting through the WiFi hotspot on his Android-based smartphone.  Same result.  Mixed in with work we had a great visit with Jim and hope to meet up with he and Chris at least once while they are in Q.

After Jim left Linda and I were headed in to have a bite of lunch when an unfamiliar car pulled into the lot.  Barb was by the road and pointed the driver in our direction.  We quickly realized that it was Mara.  She had called Linda first but Linda did not hear the phone ring so it was a wonderful surprise when she showed up.  We visited for a couple of hours while we snacked on hummus, pretzels, and red grapes.

Mara is camped on BLM land north of town with the WINs (Wandering Individuals Network) and has been traveling off and on with groups of WINs since we last saw her in Gillette, Wyoming in July 2013.  Since that time she has also gotten a different motorhome, a 35′ Fleetwood Bounder, with which she is very pleased.  She invited us to join a group of WINs on Sunday to go to The Desert Bar and I think we will.  Linda checked it out online and it is a completely solar-powered, off-the-grid, place.  You have to take dirt roads or ATVs to get there.

It appears that things are finally going to get busy for us.  Gary, from BCM, is supposed to arrive tomorrow and Curtis, from RVillage, is supposed to arrive on Saturday.  Forrest and Mary are already here as are Chris and Cherie of Technomadia.  The Escapees RV Club has happy hours scheduled tomorrow and Thursday at one of the BLM areas east of town.  Blythe, California has a bluegrass festival starting Friday and running through Sunday.  We will probably go on Friday as there is also a Balloon Festival in Lake Havasu the same three days which we will probably attend on Saturday.  Somewhere in there I need to repair our Aqua-Hot and I am thinking that it will probably be Thursday.  The “Big Tent” Sports, Vacation, and RV Show starts on Saturday (17th) and runs through the Sunday the 25th.  Marilyn arrives on the Thursday the 22nd and leaves on the Thursday the 29th.  The last full week of January really is the peak of the winter season in Q.

After Mara left I used my macro lens to photograph the front and back of both of our amateur radio operator licenses.  I post-processed the images to improve the readability and reduce the file size.  Once I had the photos ready I downloaded and installed the EchoLink software on my Asus laptop.  I went through the initial configuration for my license and tried the server connection test.  As with Butch’s installation, two of the four UDP port tests failed.  I ignored that for the moment and went ahead with the validation procedure for my ham license.

Anyone can download and install the EchoLink software but only licensed hams can legally use it.  That is because it can, and often does, connect a computer to a ham radio repeater that is “on the air” and only licensed hams are allowed to transmit on those frequencies.  Validation was a multi-step process.  When first starting EchoLink I had to supply my FCC callsign, name, and (base station) location.  That information was transmitted to a database on the EchoLink servers but the EchoLink organization needed to validate that I was actually the person to whom that callsign was issued.  Through a separate process on the EchoLink.org website I had to upload JPEG image files of the front and back of my wallet license.  Once someone examined the images and made sure the call was active in the FCC database they “flipped the switch” on the server side and I was finally able to connect to stations if I wanted to.  I repeated the process later for Linda’s license.

While I was waiting to have my license validated I started trying to figure out how to get the EchoLink program to connect successfully to the EchoLink servers.  When the communications test with the servers runs it identifies the IP address assigned to the computer.  I went into the WiFiRanger Mobile and enabled UDB port forwarding for ports 5198 and 5199.  The TCP test was successful so I did not set up TCP port forwarding for port 5200.  Enabling port forwarding, however, was necessary but not sufficient.

What I ended up doing was switching the operating mode on the ESET Smart Security program from “Automatic” to “Interactive.”  With that change, the program would pop up a message box every time another program had outbound or inbound traffic through a port and ask if I wanted to allow the communication and optionally create a rule for it.  Several of those messages had to do with EchoLink and after clicking “Allow” to all of them the server/router tests were finally all successful and the program was fully functional except for the license validation.

Sometime in the late afternoon another motorhome showed up and backed in to the property with Jim L.’s help.  It was Larry and Sandy, who normally stay at Jim L.’s RV Park near the QIA.  Jim’s park is full so he put them over here in the spot by the laundry where Jack and Maria parked for a couple of nights a week or so ago.

We had leftover red lentil potato curry (thick soup) for dinner with the rest of the garlic naan and a glass of sangria and it was very good, again.  I finished up my FMCA education committee task and e-mailed it off.  I received an e-mail that my ham license had been validated so we played with the EchoLink program and User’s Guide for a while but did not try to connect to any stations.

While I was working on all of this I noticed that nine updates were pending for Windows 8.1 and there were four optional ones as well.  Installing updates is often an iterative process and so it was again this evening.  One of the optional updates was a roll up from November 2014 that was 723.9 MB.  That’s a big update.  I started downloading it at 23:52 MST and then went to bed.  My hope was that fewer people would be trying to use the local DSL system to get online at that hour and the update might actually load and install successfully.  But I would have to wait until tomorrow morning to find out.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

2015/01/14 (W) SKP Happy Hour

As soon as I got up this morning I checked the huge Windows 8.1 optional rollup update that I started last night.  It had completed successfully except for restarting the computer, so that’s what I did.  While the update finished installing I made coffee and got the juice ready and Linda prepared our cereal.

Once the update finished I checked e-mail and websites.  Linda made white bean hummus to take to the SKP Happy Hour later today.  She then remembered that the Farmers Market at Desert Gardens was this morning from 8 AM to noon so we drove over there.  There was only one stand selling produce, but they were from Blythe, California only (20 miles away) so the produce was very local and very fresh.  Linda bought an assortment of veggies and a grapefruit.

We had parked at the south end of the western parking area and from there we could see a road going back towards “Q” Mountain and a well-defined trail going up the western side.  We drove back there and determined that we could park there when we decide to climb the mountain and do some panoramic photography.

We drove to Barry’s Breads and bought a loaf of Barry’s Basic Bread and then continued east on Kuehn Street to confirm Lloyd DeGerald’s location.  We took Riggles Avenue back over I-10 to Main Street and headed back towards Central Avenue, stopping at the Road Runner Market for a few things.  When we got back Jim and Barb were aggressively trimming the Palo Verde trees in the cactus garden.

As we often do most mornings, Linda went for a walk and I worked at my computer, installing three more optional updates and taking care of some e-mail.  We gathered up chairs, food, and beverages at 12:45 PM and drove over to the SKP Happy Hour on East Dome Rock Road.  There was already quite a crowd when we arrived and everyone was in a good mood.  And why not.  The sun was shining, the air temperature was pleasant, there were tables arrayed with food, people had beverages of their choice, Johnny Cockrum was performing, and lots of folks were meeting old and new friends.  We had a thoroughly pleasant time, but we always do when we are with groups of Escapees.

On the way back to camp we spotted Lloyd DeGerald and his wife out walking their dog and stopped briefly to chat about our Aqua-Hot.  We then stopped at the trailer for the Two Crazy Ladies and ordered engraved hang tags with our call signs and a sign asking emergency responders to rescue our cats.

When we got back to camp Linda went for another (short) walk and I sat down to work at my computer.  We lost our Internet connection while we were away and the DSL gateway would not re-associate with our WiFiRanger Mobile so I had Barb open the house and I power cycled the gateway.  I was then able reestablish the connection to our WFR-M.  That is the second time this has happened since we arrived here but so far has not caused us any real difficulty.

Butch has been having problems with their Progressive Industries EMS cutting off their shorepower due to high voltage.  We noticed during dinner that our PI-EMS was also showing a PE-3 (previous error – high voltage).  I do not know if our Magnum inverter switches on “instantly” when outside power is lost or if there is a delay but I am now wondering if we lost our Internet connection due to loss of power to the WiFi Ranger Mobile after which it was not able to reconnect with the gateway.  The next time this happens I may try powering the WFR-M off for 60 seconds and restarting it.  It’s also possible that the high voltage is wreaking havoc on the DSL gateway.

After dinner I sent a TXT message to Gary at BCM inquiring if he had arrived in Q as planned.  He called back and said they had just cleared Indio, California.  I suggested they find someplace to stop and rest and finish the trip tomorrow morning in the daylight.  They are headed to the Quartzsite Market Place dry camp area for the Eagles International bus gathering.  I spent the rest of the evening working on five different articles for Bus Conversion Magazine before finally turning in around midnight.

 

2015/01/01-07 (R-W) Q 2015 W1

2015/01/01 (R) Hola 2015

The salt restraining tube for the water filter housing.  The slotted end (R) goes down and the o-rings sit in the other end.

The salt restraining tube for the water filter housing. The slotted end (R) goes down and the o-rings sit in the other end.

Having stayed up later than usual last night to see the old year out and welcome the new year in we were in no hurry to get up this morning, especially given that the temperature outside was in the upper 20s.  But Linda said she would make her yummy vegan cinnamon rolls for breakfast so I felt obligated to get up and eat them.  Besides, it’s my job to make the coffee.  The rolls took quite a while to make and we ended up having them for brunch, but they were worth the wait.

I spent much of the morning looking for new games in the iStore.  I downloaded a dozen free ones and then started trying them in turn.  Most of them immediately tried to sell me a full version or ran a full-screen advertisement each time I tried to start a new round of play.  If they did that I immediately deleted the app.  I cannot imagine what makes a game developer think someone with tolerate that more than once.  At some point I realized that my AppleID was still associated with an old e-mail address so I initiated the process of changing it.  The process was not as seamless as I thought it could/would/should be, but I eventually got it sorted out.  Or as they say or Doc Martin, “sorted.”  As it turned out my credit card information was also out of date so I updated that as well.  Obviously I do not make iStore purchases very often.

I needed to regenerate our portable water softener even though it was 48 degrees F outside in the shade.  It was, however, comfortable enough in the sun to be able to work.  I started at noon cutting the plastic drain pipe that I bought at Herb’s Hardware the other day to a length of 10″ which is the length of a standard water filter.  I cut eight 3/8″ slots in the bottom end of the tube and got an O-ring from Butch to fit in the swaged upper end.  The purpose of the tube is to hold salt so that incoming water is required to pass through it to get to the softener but the salt crystals cannot actually wash into the softener.

Linda helped me transfer the contents of a 40 pound bag of solar salt to several two-gallon zip lock bags.  I then put a small quantity of salt in a one-quart zip lock bag and gently smashed it with a two-pound sledgehammer, although as I write that it seems to be something of an oxymoron.  I inserted the tube into the removable filter housing, slotted side down, and poured the salt around the outside of the tube.  I smashed a second bag of salt and added it to the housing.  I put the housing back on the filter head and slowly ran water through the softener for almost two hours.  I got a water hardness test strip from Butch and tested the output of the softener.  It was still showing 7 grains of hardness, exactly the same as two days ago.  It appeared that the regeneration process had not had any effect.  Bummer.

I discussed the situation with Butch and he suggested I back flush the softener.  To do that I needed a hose with female hose fittings on each end.  This is the kind of hose used to hook up a washing machine but neither one of us had one with us.  Butch, however, had a female-female adapter which allowed me to connect a male hose end to a male fitting on the outlet of the water softener.  (Backflushing literally means running water through the softener in the reverse direction to flush out any debris that may after gotten in through the normal inlet.)

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

After backflushing the softener I tried regenerating it again.  This time I used a 26 ounces of fine grain non-iodized table salt.  With my homemade diverter tube still in place I added the salt around the outside and screwed the housing back on.  I let the salt sit in the housing for 20 minutes to start to make a brine and then ran water through the softener until I got a very salty taste at the output.  I then shut the outlet valve and let it sit for 20 minutes.  When the time elapsed I ran water through the softener for another 15 seconds, checked it for saltiness, and shut the outlet valve.  At the end of another 20 minutes I ran water through it at a very slow rate for 20 minutes and then checked it again for salty taste.  It was still slightly salty and as it was getting close to sunset I decided to let it sit overnight.  I will finish flushing it tomorrow and check the hardness again.

While I was fussing with our water softener Butch recharged theirs in about 30 minutes.  When he tested the water at the end it indicated zero (0) grains of hardness; completely softened.  Their softener is different from ours and the regeneration procedure is very straightforward and apparently works.  For now I need to figure out a guaranteed procedure for regenerating ours, but long-term I need to figure out some other arrangement of just get a different softener.

The arrangement I am considering would be in conjunction with redoing the water bay. With a different arrangement of tanks I could create space in the bay for the softener, multiple filter housings, and associated plumbing.  I could set up an arrangement that would divert the incoming water (after the first/sediment filter) through a clear filter housing into which I could put the salt.  That clear housing/head would be permanently modified to force water through the salt and allow me to see when the salt was gone.  It would also eliminate the need to remove and reinstall the filter the way I have to now.  Alternatively I could put a tank between the filter housing and the softener (instead of the clear housing) and use it as a brine tank.  If the tank was big enough to hold a 40 pound bag of solar salt it would work just like a home softening system.  Water would sit in the tank with the salt for days so that the brine was ready to use when it was time to regenerate the softener.  I could even rig up a separate pump just for pumping the brine into the softener.  I’m going to give this a lot of thought before I start changing things around, but last winter in Florida and this winter in Quartzsite have made it very clear that hard water is a problem and we need a very effective and efficient way to deal with it.

While I worked with the water softener Linda began preparing a Tex-Mex bean soup for dinner and then went for a long walk.  She finished making the soup when she got back while I took a short nap.  It cooled off quickly as the sun set and nothing is quite as satisfying on a cool evening as hearty, hot soup.  It also had a bit of red pepper heat which was a nice bonus.  It was really good soup.

I had a few e-mails from Gary at BCM and a nice follow-up e-mail from Kathy at the Michigan Assessment Consortium.  She attached a copy of their holiday letter so I attached a copy of ours in reply.  I spent a little time browsing websites for OTA TV antennas and turbo boost gauges and finally went to bed without resolving what to do about either thing.  I have a lot of nights that end like that.

2015/01/02 (F) Crazy Days In Q

Contact is established with our cat, Jasper.

Contact is established with our cat, Jasper.

The “show” at Desert Gardens officially opened yesterday and runs through the end of February, so Quartzsite is quickly be transformed into a crazy place.  We were chatting with Butch, Fonda, Jim, and Barb after breakfast and Barb reminded us that starting now driving and parking “downtown”, and especially along Kuehn Street south of I-10, during the day will be difficult to impossible.  She offered to drive us down in the golf cart and come pick us up if we did not want to walk.  She also told us that many vendors will hold purchases for pickup at the end of the day.  We exchanged cell phone numbers, which we had not yet done since they arrived.  She suggested that if we wanted to eat out we should go early or right before closing as we might not be able to get seated/served otherwise.  There’s no doubt that we have lucked out on our arrangements this winter, and the situation just keeps getting better.

Linda was browsing on her iPad and discovered an all vegan grocery store in Rancho Cucamonga, California; the largest all-vegan grocery store in the world.  I looked up Rancho Cucamonga on Google Maps and it is located about half way between Los Angeles and San Bernardino.  Based on the speeds I like to drive (often just below the speed limit or 68 MPH, whichever is less) it looks like a four hour drive one-way from Q.  That’s obviously too far for a regular grocery run, but we might make a day trip in that direction sometime this winter and find the store while we are over there.

One of the things I did after climbing in bed last night was spend a little time looking at the Sure Marine Service website.  SMS is a major supplier of repair parts for Webasto diesel-fired hydronic systems headquartered in Seattle, Washington.  After studying their parts diagrams I became unclear (and concerned) as to whether the burner we removed from Butch’s old unit was a DBW2010 or a DBW2020.  They are very similar but not identical.  I am almost certain that our original burner is a DBW2010, but our AHU-xxx Aqua-Hot is so old that the model number is no longer referenced on the website and model specific documentation, like a service manual, is not available for download.

The reason I was looking at the parts diagrams was to identify the bearing kit for the blower as I wanted to order two of them today.  What I could tell from the website was that the 2020 is a higher BTU output burner and so one of the differences is that the 2010 uses a 0.35 GPH nozzle while the 2020 uses a 0.60 GPH nozzle.  That alone might account for why we seem to have poor combustion, although even money is still on bad bearings.  The unresolved issues and the inability to investigate at midnight did not make for a good night’s sleep.

I have the Aqua-Hot service/repair manual for the unit I bought from Butch, both on paper and on my iPad, so I spent some time this morning looking at the iPad version.  I could not tell if they used the same bearing parts so I did not order anything today and won’t until I can determine model numbers.  I asked Butch if he knew which burner was in the Aqua-Hot I bought from him, but he did not.  The service manual shows a Webasto label that identifies the burner model, but does not show where the label is located.  More investigation was needed.

After I got dressed I e-mailed Bill Gerrie (RetiredBusNut) in Ontario, Canada with questions about gauges and sending units for our bus engine and transmission.  I then started dealing with the water softener.  Linda returned from her walk and started preparing lunch, so I emptied the filter housing of the little bit of salt that was still in the bottom, rinsed it clean, re-installed the filter, and let it run for 20 minutes to fully flush out any residual salt water.

Linda made a warm garbanzo bean and kale salad for lunch with lemon juice and garlic.  It was the first time she had tried this recipe and we both agreed it was a keeper. After lunch I tested the hardness of the water coming out of the softener and it registered on the test strip between zero (completely soft) and 1.5 (definitely soft) so I dumped the remaining (hard) water in the fresh water tank and refilled it with 120 gallons of nice, soft water.  After the tank was full I retested the water coming out of the softener and got the same reading as before.  Finally, some good news on the water softener front.

With water softening taken care of (for now) I did an online search for a panoramic camera tripod head.  I really like shooting panoramas and the Microsoft Image Composite Editor (MS-ICE) does a remarkable job stitching images together.  Most of my panoramas have been handheld, which makes the performance of MS-ICE all the more impressive.  I have shot a few panoramas using a tripod but without a nodal point (spherical) pan head, so that is what I was searching for online.  B&H Photo had a Manfrotto on sale for $280, marked down from $600, but their order desk was closing for the day and I did not want to be rushed making this decision so I did not order it.  They will reopen tomorrow, so I will think about it overnight and do some more research.

I got our old Webasto burner out of the front bay and found the label.  It is, indeed, a DBW2010, specifically a DBW2010.75 with a 0.35 GPH nozzle rated at 45,000 BTU.  Linda recorded the details, including the serial number, and then helped me rewrap it in bubble wrap so I could put back in its storage pail.

Linda then went to Parker, Arizona with Butch and Fonda to check out the Safeway grocery store and look for some things at Walmart.  The Parker Safeway was supposed to carry Daiya vegan cheese products but they were nowhere to be found.  It appears that our closest source will be Whole Foods.  There are five of them in the greater Phoenix area but that is a two hour drive one way.

While the three amigos were gone I removed the cover from the Aqua-Hot in our coach and found its label.  Much to my relief it is also a Webasto DBW2010.75, 45,000 BTU.  It should also have a 0.35 GPH nozzle, and probably does, but I did not pull the burner out to check.  I noticed some soot on the final fuel filter inside the housing and in other places so that gave me something new to be concerned about.  I was pondering the situation when Jim and Barb and Roho came over to visit and we had a good long chat.  When they went back to their motorhome I put the cover back on the Aqua-Hot and put all of my tools away.

My plan for tomorrow is to turn the Aqua-Hot off, let it cool down, and pull the burner to check the nozzle.  It’s possible, though not likely, that I do not have the burner seated quite right and there’s a chance, though very small, that reinstalling it will fix, or least improve the performance.  My money (literally) is still on the blower bearings.  Hopefully it does not also need a new motor as everything on a Webasto is more expensive than seems reasonable. It’s another fine example of precision German engineering and manufacturing.

Even though I have quite a few e-mail addresses that I use to segregate electronic correspondence into manageable categories my inboxes still end up flooded with e-mails.  Very few of them are spam—we have good spam filtering on all of the accounts—but some of the highest volume inbound traffic is notifications of things like failed login attempts on WordPress websites.  Those e-mails do not get replies and often do not require any specific action on my part, but they sometimes obscure the presence of other e-mails that do require my attention.

Microsoft Outlook is able to deal with incoming (and outgoing) e-mails based on user-defined “rules” but I had never played with that feature until today.  I used the online help system to read about the whys and wherefores of e-mail rules and then tried creating some.  Once I understood what I was trying to accomplish it was mostly point and click to get it done, with a little typing thrown in.  What I ended up doing was creating sender/subject subfolders under the inbox of certain accounts and then creating a rule for each subfolder that directs incoming e-mails matching the criteria to the correct folder.  By keeping the sub folders under the inbox folder it will be clear to me that these are e-mails that I have received but not yet dealt with.

For dinner Linda made a cooked shredded Brussels’ Sprouts dish with tomatoes, dried cranberries, and pistachios and served it alongside the leftover Mexican rice with a glass of sangria.  Ole!  We agreed that both of these dishes were keepers and went well with the fruity wine.  The rest of the evening was quiet.  Linda read and played her online games while I finished up working on this post.  I finally went to bed and started reading the service and repair manuals for the Aqua-Hot system and the Webasto burner.  According to the long-term weather forecast tonight should be our last night with an overnight low temperature below freezing.

 

A few of the vendors at Desert Gardens, Quartzsite, AZ.

A few of the vendors at Desert Gardens, Quartzsite, AZ.

2015/01/03 (S) Hammer Stahl

I got up at 6:30 AM today.  I had been awake for a while before that and had some things I needed/wanted to do on my computer.  These were quiet tasks that I could do in the front of the coach, with the heat turned up, without disturbing Linda.

I always check my e-mail first.  There was a group message from Hillary at RVillage to all of the Ambassadors regarding a new feature they will be rolling out soon and seeking our assistance.  I mentioned this to Linda when she got up and we watched the two YouTube videos.  We did not have time today but will work on it tomorrow in advance of a 5 PM (4 PM PST) web meeting.

My first project today was updating the spreadsheet I maintain for our FMCA Freethinkers Chapter, which I started working on last night.  The chapter treasurer maintains our checking account but as the secretary I maintain the records including the roster and who has paid their dues for what years.  Because I have all of those details I also generate the quarterly and annual financial statements.  I entered the information for dues payments that had been received between November 1 and December 31.  I then added the five worksheets for 2015 (four quarters and year), which tie together and link back to the 2014 statement, and updated the cumulative financial statement.

Linda got up so I put my work aside to make coffee while she made breakfast.  We had a few bananas that were ripe so she made green smoothies for breakfast.  We happen to like kale but if we didn’t, green smoothies would be an excellent way to get our daily dose along with several other healthy ingredients.

We talked about visiting the market area today and decided to go later when it was a bit warmer.  The temperature a 9AM was still only 40 degrees F so Linda bundled up and went for her morning walk while I continued to work on my spreadsheet.

Once I finished the spreadsheet I worked outside for a bit.  I removed the cover from the burner end of the Aqua-Hot while it was running to check for an exhaust leak (sight, smell, touch) but I could not detect one.  When the cycle finished I turned the burner off.  My plan was to let the unit cool off and then remove the burner to check the nozzle size and do a general inspection of the combustion chamber and visible parts, but that did not happen today.

What I did instead was return to my computer and start putting Webasto repair parts in my shopping cart on the Sure Marine Service website.  The bearings on the installed burner are definitely whining and need to be replaced.  They are supposed to be replaced regularly anyway, so I put two sets in the cart.  It is very likely that they are causing the motor to run slow which means insufficient combustion air, and possibly lower fuel pressure, leading to the dark smoky exhaust.  I also put a fuel solenoid valve in the cart.  There is a good chance that the valve and/or the solenoid are not working on the other burner.  There’s also a chance that the ignition coil has failed, but the solenoid valve costs 1/2 as much as the coil, so I’m hoping it’s the valve.  I got the order submitted with UPS ground shipping and used PayPal to make the payment.

Once I completed the SMS order I loaded the B&H Photo app onto my iPad and spent quite a bit of time going between their website and the Sony online store trying to figure out if I should order a panoramic tripod head and/or new camera, possibly with a lens and flash unit.  Sony has the Alpha 99 FF body marked down from $2,800 to $1,900 with the vertical grip and an extra battery thrown into the deal, an additional $500+ value.  They will also bundle in the SAM 28-75mm f/2.8 lens for $400.  The lens by itself is normally $900, so that’s another $500 savings.

So for $2,500 I could get $4,200 worth of Sony’s top-of-the-line “flagship” DSLR (DSLT, actually) equipment, except for one thing; it was all on back order with an ESTIMATED ship date of February 4, 2015.  That’s my birthday, so if it actually shipped on that date it would be quite the birthday present, but if it was delayed very much there would be the very real possibility of it arriving at our location in Q after we had left.  Not good.

So what about B&H Photo?  It turns out that they (claim to) have all of these pieces in stock and they are selling the body with the added pieces for the same price as Sony, but they are not offering the lens at the bundled price.  That was the deal breaker that saved me spending a lot of money today.  Besides, I have been waiting a long time for Sony to officially announce and the ship the new (rumored) flagship alpha a99-II with its 36MP FF 35mm sensor and long list of awesome features.  To decide now to by prior generation technology it would have to be a very attractive deal, much better than what I was seeing online.

I ended up ordering a Manfrotto Nodal Point Pro panoramic tripod mount from B&H.  It should be here by the end of the week.  When it arrives I think we will hike up to the top of “Q Mountain” and try to capture the true essence of Quartzsite in the winter, which is RVs from horizon to horizon.

We headed down to the market area on Kuehn Street with Butch and Fonda and walked around for a couple of hours in the Tyson Wells Show grounds north of Kuehn Street and west of Central Avenue (US-95).  This particular market area had really filled up with vendors in the last few days.  Linda bought a nice white apron and really nice Hammer Stahl 5.5″ Santoku knife.  She checked online when we got back and she paid about 55% of the MSRP on the HS website.  She bought it from Cutlery by LeClaire, which also has a website, and has it on sale for $20 more than the price on the HS website, marked down $20 from their “regular” price.  The point is, she got it for what appears to be a good price of $59 and it came in a nice box with a ceramic sharpener thrown into the deal.

We drove farther west on Kuehn Street and pulled into the Desert Gardens show grounds.  It was getting near sunset, so we did not stay long, but Linda and I walked enough of it to get a feeling for the place.  It was a “rougher” setup than Tyson Wells and many of the booths were selling large, rough rocks and gemstones.  The vendors also had a lot more equipment set up and were using it to process materials.  We’ll be back, probably more than once, and earlier in the day so we can spend more time.

When we got back to our motorcoaches Fonda came over and worked with Linda for a little while on their business records.  We then had a nice salad and some of the spicy bean and pasta soup (that Linda made the other day) with crackers and sangria.  I spent more time after dinner researching stuff on my iPad and working on this post.

We appear to be in one of the few places in the country that is not getting clobbered by bad weather. The temperature is not even supposed to drop below freezing overnight. It will still be cool tomorrow, however, and we did make specific plans before going to bed.

 

A view of "Q" Mountain from the Desert Gardens Show area.

A view of “Q” Mountain from the Desert Gardens Show area.

2015/01/04 (N) Our Village

We had vegan pancakes for breakfast which prompted me to suggest that Linda invent some recipes, even if they are interesting and successful variations on existing ones, and feed them to our grand-daughter.  Linda could put them on our website using the WP Ultimate Recipe plug-in and, if they met with her approval, name they after “Bitty” (youngest grand-daughter’s latest nickname, although I think I will always prefer “Schmoo”).  Perhaps Pancakes Madeline; Sautéed greens a la Madeline; Pasta Madeline; or Madeline’s vegan mac and cheese.  Being retired gives me a lot of time to think.

Joe’s brother, Jim L., finally returned from Nevada today and was able to get the park model trailer unlocked.  Barb has been wanting to get in and clean it since she and Jim (different Jim) arrived.  Barb is a keep busy kind of gal.  She is responsible for maintaining the apartment and laundry room while she is here and told Connie she would also do some deep cleaning on their house trailer, so it’s been bugging her that she could not get in to do it.  As for my part, all I did was lock the door on the trailer the way Connie asked me to.  Barb and Jim (husband) had lots of keys but could not get any of them to work.

 

Today was shower day.  This is always more of a production than we would like because we keep the cats’ litter tray in the shower.  Most of the time that works really well—it is out of the way and contains any mess they might make—but it is inconvenient when we want to use the shower for its intended purpose.  Besides pulling the tray out into the hall by the bathroom door we have to clean up any stray litter in the shower to make sure it does not end up in the gray water waste tank.  Litter tray or not we still have to spray the shower walls when we are done, squeegee off the glass door, let everything dry, and then reassemble it as a giant cat litter box.  But it works and it’s one of the compromises we willingly make to live with our cats in so few square feet.

 

Once I was dressed I went outside to chat with Jim L. (Joe’s brother) and we discussed the possibility of upgrading the electrical service at our site to “50 Amp” (240VAC, 50A, 4-wire, the equivalent of a 120VAC, 100A residential service).  It’s not an issue for us right now as the cool weather has us burning diesel fuel to make space heat, but once the weather turns warm we may need our air-conditioners.  We have three but can only run one on a “30A” service and still have enough power to run other things.  A 30A service is just what it says; 30A of current at 120VAC.  A “50A” RV service is slightly more than three times that amount of power.

 

The electrical hookups here are very interesting.  Perhaps all RV park power pedestals work the same way, but I have never looked inside one so I don’t know.  The meter is at the top and the area below it has a top-hinged cover.  Under the cover are three panels about 3″ wide and 15″ tall.  The panels have an outlet towards the bottom and a circuit breaker near the midpoint.  Behind the panels are busses for the hot, neutral and ground with male blade connectors.  The panels have female blade connectors that engage their male counterparts when the panel is slipped and then hinged into place.  It is secured with a single screw.  If Jim L. can find a 50A panel all we will have to do is unscrew and remove the 30A panel and plug in the new one, once we verify that 240 VAC (L1& L2) are present in the box and wired to the distribution busses.

 

Instead of her usual morning walk Linda setup her laptop on the dinette table and worked on accounting and tax issues for Butch and Fonda.  I set my laptop there as well to work on the roster for our FMCA Freethinkers Chapter and Jasper got in between us, so we had a nice, cozy computing session.  When I placed my order with B&H Photo yesterday I checked a box to receive shipping status information via TXT message.  I got one this morning letting me know that my package had shipped from NYC.  Cool.

 

With accounting chores done for now Linda prepared vegan hot dogs with mustard, onion, and relish for lunch.  She then went for a long walk while I stayed at the coach and worked with a new feature on the RVillage website.  I was posting a lot of suggestions to the topic thread on the Ambassador forum and got a phone call from Curtis, the founder/CEO of RVillage.   We had a long chat and I was still on the phone with him when Linda got back.  I worked with the website some more and at 5:00 PM we connected to an Ambassador meeting using GoToMeeting on my computer.  This is a very exciting new feature and I think RVillagers and RV-related businesses are really going to like it once they know about it and see how it works.

 

Linda made mock (vegan) stroganoff for dinner.  She normally uses Basmati but the only rice she had enough of was Texmati so she used that.  Although I did not care for the texture of the Texmati in this dish (a bit crunchy), the taste was still very good.  This dish requires real cooking, which means it makes a real mess.  By the time everything was cleaned up and put away it was 8 PM and we were both tired.  I continued to research engine and transmission gauges while Linda read and played word games.  I also revisited the SonyAlphaRumors website but there was absolutely NO new information on the a99-II.  I went to bed wondering if this camera will ever actually exist.  Based on the comments I see online I am not the only one wondering if this camera will ever be a reality.

One of the hundreds of vendors at the Tyson Wells market area in Q.

One of the hundreds of vendors at the Tyson Wells market area in Q.

 

2015/01/05 (M) VSWR 1.0

Yesterday we finished up the coffees we have been using since we left Michigan at the end of November so this morning I had to open new bags and transfer the contents from their vacuum sealed bags to our metal storage canisters.  I had Teeko’s roast Ethiopian Yirgacheffe regular and decaffeinated separately, so I opened 1/2 pound bags of each.  I also opened a 1/2 pound bag of our special Sweet Seattle Dreams, which is 1/2 Sweet Dreams (decaf) and 1/2 Seattle Blend (regular).  I then made a pot of Ethiopian Yirgacheffe 1/2-n-1/2 while Linda prepared our granola with fresh bananas and fresh blueberries.

 

Linda went for her morning walk while I continued to do online research regarding the enigma known as the Sony a99-II DSLT camera and the supposedly discontinued, but apparently still very much available, Sony alpha a99.  If I did not already have a nice assortment of compatible Minolta A-mount lenses and flash equipment I think I would stop wasting my time with Sony cameras.  But I do, and so I continue to wait and be frustrated along with thousands of other “enthusiast” (sub-professional) photographers.  Because Sony builds the image stabilization (anti-shake) feature into the alpha bodies instead of the A-mount lenses the feature is available even with older Minolta lenses and the new lenses are slightly less complicated and less expensive than the Nikon and Canon lenses, which have the image stabilization built into each lens.  I think this was one of Sony’s best innovations.

 

I also continued to look at automotive gauges and sending units and decided to call Bill Gerrie (in Ontario, Canada) to follow up on his reply to an e-mail I sent a few days ago.  We had a great chat and he was able to clarify some things and add quite a bit of specificity to his written reply.  As a result I have a pretty good idea of what I am looking for; now it’s just a matter of finding it and deciding to place the order.

 

I was starting to work at my computer when Linda returned from her walk.  She eventually fixed a couple of vegan hot dogs wrapped up in tortillas with mustard, onions, and relish.   As I was finishing my meal I got a call from Gary Hatt at BCM.  He recently acquired an Eagle bus conversion and had some questions about the air-conditioners and the Aqua-Hot.  He plans to be in Quartzsite next to week and we are looking forward to finally meeting in person since I have been writing articles for the magazine for almost two years.

 

Linda has been having a problem with the brightness (or lack thereof) of the touch screen on her 19 month old Windows 8.1 Samsung laptop.  It will go very dim for no apparent reason and cannot be adjusted.  There was a driver update available for the Intel HD Graphics processor so we downloaded it, installed it, and re-started her computer.  The screen was now bright, which was more useful than dim, but still not adjustable.  That could be a coincidence or a fix, we will have to wait and see.  Even though it was working (for now) I drove to the local Family Dollar and bought an HDMI cable and some lightly carbonated water.  (The water had nothing to do with Linda’s laptop computer display, we were just low on sparkling water.)  The cable will allow us to connect her computer to one of our two flat panel LCD (LED) TV/monitors if needed.  (We did that after dinner and it worked, mirroring the built-in display to the monitor and setting the resolution to match the monitor’s 1900x1080p native mode.  But it also caused the built-in monitor to dim, although not as much as before.  When we turned off the monitor and unplugged it the built-in display did not return to full brightness.)

 

Mid-afternoon I saw Butch working on his Tarheel screwdriver antenna so I inquired as to what he was doing.  He had connected his MFJ VSWR meter to it through a six foot length of coax.  He had also unplugged the control harness for the tuning motor and rigged up a temporary switch to extend and retract the antenna.  He had done this because he was getting meter readings when connected through the installed coax that indicated the antenna was not resonant at any frequency or that the meter was not working correctly.  I climbed up on his ladder to have a look and saw VSWRs that were often greater than 31:1, and never fell below 10:1, with complex impedances that were rarely 50 ohms and with both resistance and reactance values that were all over the place.  Clearly something was not right.  It was not his installed coax and I was fairly certain I was not his meter, which I had used back at their house to check the VSWR on his CB and 2m ham antennas.

 

I climbed onto the roof of their bus so it would be easier to reach things and I could work sitting down.  We tried adding a ground strap as a counterpoise but it didn’t help.  Butch then grounded the strap to the chassis at the motor but that did not help either.  Our concern was that the antenna was not sufficiently bonded (grounded) to the roof but nothing we tried made any difference.  I decided to set the antenna to its shortest length (highest operating frequency), set the meter to a lower frequency, and then slowly lengthen the antenna, thereby lowering the operating frequency, while looking for some sort of response on the meter.

 

I got no change on the meter and finally realized that the antenna (via the meter) was behaving as though it was not grounded.  I noticed what looked like a thick washer between the SO-239 antenna connector and the base mounting plate of the antenna.  The mounting plate is the ground reference for the antenna and is connected to the base of the antenna through a coil of insulated wire (an inductor) known as a base loading coil.  The spacer was a plastic insulator that was, indeed, preventing the case of the SO-239 antenna socket from making contact with the mounting plate.  As a result the antenna was not grounded through the coax cable shield, preventing the meter from obtaining meaningful readings.

 

We removed the antenna connector, removed the insulated spacer, reassembled the connector to the antenna, reattached the coax and meter, and took additional measurements.  This time we got excellent readings that made very good sense.  We checked the upper bound, lower bound, and the midpoint of most of the high frequency (HF) ham bands and were always able to obtain VSWRs of 1.3:1 or less, which was excellent.  Butch had been considering redoing the mounting of the large motorized fold-over base so it was a good thing we figured this out as it saved him a lot of unnecessary work.  If I can solve one problem without creating others I figure it’s a good day.  BTW:  VSWR stands for Voltage Standing Wave Ratio and 1.0 is not a beta version, it is shorthand for a ratio of one-to-one (1:1), which is the best SWR you can have.  Anything below 1.5:1 is considered excellent, below 2.0:1 good, and below 3.0:1 usable if that’s the best you can do.

 

Chayote is a fruit that is a member of the squash family and is related to other gourds such as melons and cucumbers.  Linda bought one last week when we went to Albertson’s grocery store in Blythe, California and decided to prepare it for dinner tonight.  She sliced it into long thin broad strips and sautéed them with onions, oregano, salt, and pepper.  She served it alongside the leftover mock (vegan) stroganoff with a glass of sangria.  Our wine friends can cringe all they want; we find the Vella and Franzia boxed wines generally agreeable and the sangrias go surprisingly well with a variety of dishes.  And it has me drinking red wine, so it’s healthy too!

 

We lost our WiFi connection this evening.  Not sure why.  The wireless gateway still shows up in the WFR list but won’t associate with the WFR.  Butch had the same problem at the same time so something obviously changed.  We will ask Barb to open the trailer tomorrow, or get Jim to do it if she is not comfortable, so we can reset the gateway.  Hopefully that will do the trick.

The sunsets in Quartzsite are amazing almost every night.  This shot was taken from our campsite in Q.

The sunsets in Quartzsite are amazing almost every night. This shot was taken from our campsite in Q.

 

2015/01/06 (T) You’ve Got Mail (Maybe)

 

Our mail situation here is interesting.  Remember that, per our Jamaican tour guide, we do not have problems, only situations, and situations are easier to deal with if I regard them as interesting rather than annoying.  With regards to receiving mail, the “situation” is as follows.  Although every structure in town has a street address—necessary for police, fire, EMS, trash collection, and other municipal services—the Quartzsite post office does not deliver mail to said locations.  They have an annex building on the northeast side of town that is nothing but P. O. boxes and all of the locals, and a lot of seasonal residents (including Joe and Connie, who own the property where we are staying) have a P. O. Box.

 

Where things get interesting is that the main post office and the street addresses are associated with one ZIP code but the P. O. boxes have a different ZIP code.  If something is coming to us via UPS or FEDEX we have to use the street address and associated ZIP code, but if it is being mailed to us USPS we have to use the P. O. Box number and associated ZIP code, or have it sent c/o General Delivery using the main ZIP code.  To confuse matters further, Joe and Connie had to return to Nevada because of Joe’s health and are having their Quartzsite mail forwarded back to their home, so we cannot have mail sent to us “care of” them as we originally planned as it just gets forwarded to Nevada.  Outbound mail does not appear to be a problem, but then why would it be?

 

The other situation that developed yesterday was that our WiFiRanger Mobile Ti disconnected from Joe and Connie’s WiFi (DSL) gateway and would not reconnect.  The WFR is telling us that the WPA password may be incorrect, but that is unlikely as we have been using it since we arrived last month, as have Butch and Fonda who also lost their connection yesterday and could not reestablish it.  The evidence suggests that the gateway needs to be reset.  Why?  Who knows?  DSL gremlins perhaps.  Or mischievous Internet fairies.  Or a problem with the local DSL service?  Or perhaps Butch keyed up his 600 Watt linear HF ham radio amplifier and blew out every wireless DSL router within a quarter mile?  Whatever the cause, once we can get Barb or (brother) Jim to open the trailer we will power cycle the gateway and see if that restores our ability to connect to it.

 

In the meantime, in order to get online last night and again this morning, we turned on our Verizon MiFi.  The Verizon signal here is strong and steady, and the data rate is much faster than the DSL/WiFi connection, but we only have a 4 GB data plan so we tend to use WiFi when available.  It is not always available, of course, especially while traveling (and especially if we are boondocking at Wally World or other such locations) and when it is available it is not always reliable or is so slow as to be useless.  This can be the situation, for instance, at larger RV rallies and even some RV parks.

 

So we logged into our Verizon Wireless account, looked at our current plan, and saw that for a mere $10 more per month we could increase our data plan from 4 GB to 10 GB.  The cost for exceeding your monthly data plan limit is $15/GB, so the extra $10/month was a no-brainer.  And VZW made it soooo easy to change our plan (once we were logged in); just click the data plan we want, review changes to our account, and click “Apply Changes.”  Done; they have our money and we have more data allocation.  Interestingly, they upped our data allocation immediately for the current billing cycle, which is Dec 20 – Jan 19, and added the $10 to the bill we will receive for that cycle.  No pro-rating going on here, but then we can use the whole 10 GB if we want/need to.

 

Interestingly the cost to go from 10 GB to 15 GB was an additional $20/month, so the 10 GB plan seems to be a sweet spot after which you pay a premium for additional access.  On the one hand Verizon wants to sell you data bandwidth but on the other hand there is a finite amount of data they can move through their network, so if you want to use a larger chunk of their capacity it figures that it would come with premium pricing.

 

Until a few months ago Millenicom was reselling 20 GB MiFi plans (on Verizon’s network) for $70.  It was the best deal around; a sufficient amount of data for the same price we were paying Verizon for only 4 GB.  Kind of unfair, when I think about it.  Well, Verizon decided to stop selling bulk capacity to Millenicom (and other MVNAs?), took all of the accounts in-house, and Millenicom went out of business.  Not really a big surprise when you think about it.  Verizon also notified those customers (as I understand the situation) of their “options” which were not, apparently, as attractive as the deal they had with Millenicom.  Not really a big surprise when you think about it.

 

Anyway, we will see how we do with 10 GB/month while we are on the road.  We can change back to our 4GB plan when we get home, but I doubt that we will, and we can increase it to 15, 20, or even more GB per billing cycle if we need to, but that is unlikely.  We have an AT&T landline at home with DSL service that provides an “always on” Internet connection (when it works).  It has a 150 GB/month data allowance and allows us to monitor and control our whole house generator and WiFi thermostat.  We have discussed adding a security system and a personal weather station linked in to Weather Underground’s Wundermap when we get home.  I don’t think our DSL connection is fast enough, however, that we could use 150 GB in a month if we tried.

 

Linda went for her morning walk and I made a quick run to Barry’s Breads.  Barry is a really nice older gentleman who has a small bakery stand on the north side of Kuehn Street east of Central Avenue.  Just behind the stand, however, is a larger trailer in which he bakes all of his products.  Those products include breads, rolls, savory items, and sweet goods.  Most of his products use butter, cream cheese, cheddar cheese, or ranch dressing, but his Basic Bread is just that, flour, water, sugar, salt, and yeast.  I have had some difficulty figuring out what time of day to stop by but this morning he finally had loaves of bread, and some hamburger buns made from the same recipe, so I bought a loaf and a pack of four buns.

 

When I got back I started working on another article for Bus Conversion Magazine.  A little over a year ago I installed an RV-Critter Guard to seal around the shorepower cord and water hose where they enter the utility bay through the floor.  I took a few pictures during the installation and have had the article on my “future” list ever since.  By the time Linda got back from her walk I had the article mostly finished and was starting to look at the photographs.

 

She had stopped at the Salvation Army store, which was open, to use their facilities and ended up buying a grocery bag full of clothes for $1.  Not $1/item, $1 for the entire bag.  Most of the items were tagged with color codes indicating prices of one or more dollars each but they had too much inventory and needed to move some product.  They told Linda that when that happens they have their $1 bag sale.  Deal.  She called Butch and Fonda to let them know and I think they headed there before going to check the post office box and then stop at the post office if needed.

 

Linda cooked a couple of our Boca vegan mock hamburger patties and served them with fresh sliced onion, lettuce, and pickles on two of the buns I had just purchased.  Not an entirely WFPB meal, but very few of our meals are.  Still, we try to get as much plant-based whole foods as we can every day.

 

Linda went for a second walk after lunch and headed down Central Avenue towards the Kuehn Street markets.  She is so fond of her 5.5″ Hammer Stahl Santoku knife that she wanted to buy the 3.5″ paring knife if Cutlery by LeClaire had it for sale as an individual item.

 

While Linda was gone I finished working on the photos for my RV-Critter Guard article.  When she returned from her walk she had both the Hammer Stahl 3.5″ Paring Knife AND the 3.0″ Birdsbeak Paring Knife.  As we learned the other day from an Alton Brown video paring is actually a technique in which food is held in one hand and a knife in the other; no cutting board is involved.  Paring knives are generally smaller with a shorter blade and most of the weight is in the handle, allowing very fine control of the cutting edge and tip.

 

The Birdsbeak is a particularly interesting and unusual knife.  The bottom/cutting edge is slightly concave rather than convex like the classic chef knife.  The bottom edge joins the top edge in a point with a shape that resembles certain types of curved bird beaks.  In use, the knife is often held stationary and the food is pressed or turned into it, such as decorative peeling, pitting of fruit, or slicing strawberries.  Linda is often reluctant to spend money on herself so I think it’s nice that she found something she wanted and made the decision to buy it.  Like any high quality tool it will make the work it is designed to do easier and more enjoyable.

 

While I was uploading my article to our Dropbox Linda went outside to sit.  Barb wandered over and I mentioned that the DSL wireless Internet gateway had quit working.  She let me in the trailer where I found it sitting on the dining room table.  I powered it off, waited 60 seconds, and powered it back on.  All of the status lights came back on in the expected sequence and I was once again able to connect our WiFiRanger Mobile Ti to it.  We ended up standing by their Country Coach Intrigue motorhome and having a long chat.

 

Butch and Fonda were gone for most of the afternoon so we only got to chat for a little while when they returned before the sun dropped behind the southwestern mountains and the temperature dropped along with it.  Linda and I talked about going out to dinner, which we have only done once since we got here, but she remembered that we had a FedEx package scheduled for delivery today and that it might arrive as late as 8 PM.  So we had leftover soup with crackers and sangria.  This was the third and final meal we got out of this pot of soup and it was good to the last drop.  It was a packaged mix but Linda thinks she can recreate it; getting the spices right will be the tricky part.

 

After dinner I read DSLR reviews on the Digital Photography Reviews website and continued to look at gauges and sending units for the bus.  Around 8:30 PM I was having trouble staying awake but by 9 PM I had gotten my second wind and decided to write another short article for BCM.  This one was on the failure of Butch and Fonda’s main engine air-compressor on the drive down, how he dealt with it on the road, and eventually ended up installing a rebuilt one here at our campsite in Quartzsite.  I had the article written by 11 PM and decided to work on the photos tomorrow.

Sunset envelopes our coach as Linda prepares dinner.

Sunset envelopes our coach as Linda prepares dinner.

 

2015/01/07 (W) Catch 22

 

My main pair of reading glasses broke yesterday; not the lenses or the frame, but one of the nose pads.  Well, not the actual pad, but the small plate and mounting loop, specifically the mounting loop.  I was cleaning them and the whole assembly fell out.  The loop was split and had opened up.  The loop was a very small and delicate piece of ductile metal so I squeezed it back into a circle.  I removed the very tiny retaining screw, reinserted the mounting loop, and put the screw back in.  I was able to do this using only the tools available on my Leatherman.  The repair did not hold and it fell out again last night.  This time a piece of the loop broke off so the only repair will be a new mounting pad if I can find one.  There is a Wal-Mart in Parker that probably has an optical shop but I don’t know how universal this mounting system is.

 

I checked the level of the floor and counter in the kitchen last night and the coach appears to have settled slightly on the driver side.  Not a lot, but enough that I can feel it and it registers on the level.  I generally have to start the main engine and build up full air pressure in order to level the coach but I thought today would be a good day to finally pull the portable air compressor out of the car and see if the leveling system will work without the main engine running.  As it turned out that did not happen today because we ended up driving to Parker, Arizona.

 

Our destination in Parker was the Wal-Mart.  The store did not have an optical department but we found an eyeglass repair kit in the pharmacy area with a pair of screw-in pads and a pair of snap-in pads.  They also had a repair kit with a tiny screwdriver, spare screws, and other parts.  Between the two kits I was able to install a new pad in the car to replace the broken one.  That saved us a trip the optical shop in town.

 

Parker sits on the Arizona side of the Colorado River which is the boundary with California.  We decided to drive across and then take CA-62 over to US-95, follow it south along the River back down to Blythe, and then take I-10 back to Quartzsite.  Butch called while we were in Parker to let us know that there was a Farmer’s market at Desert Gardens.  It operates on Wednesdays from 8 AM to noon so we did not make it back in time but resolved to go in future weeks.

 

I worked on my “roadside repair” article for BCM while Linda went for a walk.  Jim and Barb had gone to Blythe to buy a new faucet and Jim L. stopped by and helped Jim B. install it.  They borrowed a caulk gun from us (we carry two in the bay) but had to go buy caulk.  UPS showed up with yet another package for us, after which we had a long conversation about the inadequacies (incompetence) of the U. S. Post Office in Quartzsite.  (The UPS driver told me that both UPS and FedEx have extra drivers and trucks delivering into Quartzsite during the peak season.  What a novel idea.)

 

Back to the post office.  We are waiting for a shipment of two bottles of water hardness test strips that we ordered through Amazon but were shipped via USPS by a swimming pool supply company in Elkhart, Indiana.  I gave them the P. O. Box here in Q since the post office does not deliver mail to street addresses and it appears that they will likely get returned to the sender rather than delivered to us.  The root cause of the problem (and it is a problem) is that Joe and Connie are having their mail forwarded to their home in Nevada.  If their names are not on the mail the post office won’t put it in the box, but if their names are on the mail it still does not get put in the box, it gets sent to Nevada.  So as of now the box is sitting there but cannot be used; a genuine “catch 22.”

 

Fine, we will just use General Delivery.  The problem with that (and it is a problem) is that you can only pick up the GD Mail at the Quartzsite post office between 11AM and 1 PM, and there are untold numbers of people trying to do the same thing.  That means ridiculously long lines and ridiculously long waits.  Considering that the influx of seasonal “residents” to Quartzsite has been going on for over 30 years the postal “service” has had ample time to figure out how to handle the situation.  I mean, Amazon practically runs its holiday operations with seasonal employees, many of whom are RVers.  Gee, I wonder if there are any RVers around Quartzsite this time of year.  While the post office is trying to figure out how to not deliver our mail we have two more UPS shipments scheduled to arrive on Friday.

 

Linda made a zoodle dish for dinner.  She used her SpiraLife to turn a zucchini into long thin strips which she cut into 6″ lengths and then used like spaghetti in the dish.  The other ingredients were onions, garlic, mushrooms, asparagus, and green beans.  Everything got sautéed in a pan with a little olive oil, salt, and pepper.  We had a glass of Lamb’s Valley Organic Sweet White wine and it was a lovely meal.

 

After dinner I put the finishing touches on my BCM air-compressor repair article and e-mailed it to Butch to proof-read.  The only thing worse than writing an article that makes me look stupid is writing one that makes someone else look stupid, especially a friend.

 

I had an e-mail from Gary, the publisher of BCM, letting me know that the December 2014 issue was finally available online.  I downloaded both the SD and the HD versions.  I then clipped the cover from the SD version, pasted it into MS Paint, and saved it as a JPEG file.  I opened it in Faststone Image Viewer, resized it to a thumbnail, and sharpened it.  I then edited the BCM page on our website, adding the thumbnail image, the title of my article, and a brief description.  I have a similar entry on that page for every issue in which I gave had an article, starting with the February 2013 issue. The December 2014 article was my 14th in 23 months.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

 

2014/12/26-31 (F-W) Wrapping Up 2014

Note: This post covers the last six days of 2014. It is long and there are no pictures.  Sorry.  🙁

2014/12/26 (F) Cool Letters

When we woke up at 7 AM the temperature was 41 degrees F but by 8:30 it had dropped to 35.  According to the Weather Channel app on our iPads we have a freeze warning posted for the overnight hours tonight (Saturday 0000-0800).  The 12-day forecast is for an extended period of cooler temperatures with highs in the 50s and lows in the 30s, including a few nights near freezing, but that is normal for Q at this time of year.  Desert regions are not always hot and actually experience an extreme range of temperatures.  The forecast back home has lows dropping into the teens with one night forecast at 13 degrees F.  Burrrrr.

Connie was apparently tracking the weather in Q as well, even though she and Joe are back in Nevada for most of the winter, as she called to ask me to turn the water off at the street if the temps got down to freezing.  The city water system here has supply pipes that come straight up out of the ground near the street, turn horizontal, go through a valve, then through a pressure regulator or small meter (not sure which or both), go through another valve, and then turn 90 degrees and go back down into the ground.  Joe and Connie keep all of this covered under a wooden box and we have noticed other properties doing the same thing, but not all.  Although the temperatures here can/do drop below freezing in December and January it is never for more than a few hours just before sunrise.

Presumably the city water lines are deep enough to avoid ever having freezing problems, but I do not know how deeply the pipes are buried on Joe and Connie’s property.  The main thing at risk are the stand pipes that come up out of the ground at each RV site and any hoses that are attached to them. I discussed all of this with Butch as it seemed to me that it would have to get below freezing and stay there for quite some time before we would have any problems.  It also seemed to me that if we were going to turn the main water supply off we should open a faucet on each of the supply risers so the water would have somewhere to go as it expanded.  (Water expands as it cools, reaching a maximum volume at around 34 degrees F.  As it changes state from liquid to solid it actually contracts slightly in volume.)  To be really safe we would need to drain all of the flexible hoses.  That struck both of us as unnecessary.

The aisle lights did not work again last night.  It’s always something with a RV and you have to be psychologically prepared for that or the lifestyle will drive you crazy.  This problem has occurred before and the usual reason is that the (3-way?) switch by the dinette gets toggled and renders the push switch in the bedroom inoperative but that was not the case this time.  One of the three wires that go to that switch was only attached by a few strands and broke when I checked it.  None of the connectors are in good shape so repairing those connections moved to the top of my bus project list today.  I did not get to this today, I only moved it to the top of my list.

While I made our morning coffee Linda put together an Amazon order.  Amazon Prime has worked well for us and Butch has already successfully received a UPS shipment here, so it was easier to order a bag of Science Diet cat food for delivery to our bus than to deal with the limited hours and selection of the local veterinarian or drive to one of the larger surrounding cities in the hope that a pet supply store that might stock the specific formulation we feed our cats.  She also ordered two bottles of Hach SofChek water hardness test strips and some additional silicon utensils.

Linda had our holiday letters stuffed and addressed on Christmas Eve, but not in time to get to the post office before it closed at noon, so she went today, bought stamps, and sent them on their way.  Hopefully they will arrive by New Year’s Eve while folks are still in the holiday spirit.

Sometime during the morning we got a visit from missionaries of the (local) Jehovah’s Witnesses cult.  Our conversation did not last long.  After they left I was pondering this day after Christmas visit and it occurred to me that perhaps they do an inventory of Quartzsite and the surrounding BLM camping areas so they know when someone knew has pulled into town.  I guess saving souls can be a lot of work.

Linda was doing the dishes and the Black & Decker SpaceMaker coffee carafe broke.  She checked online and was going to order a generic replacement but decided she should check the model of our unit.  When we lifted it up to look for the model number we discovered water on the shelf underneath it.  Ugh.  Suddenly we were no longer looking for a carafe but a new coffee maker.  We removed the cabinet door, latch, and lower front retaining bar and pulled the unit out.  I then removed the shelf, wiped it off, and took it outside to dry in the sun.  There are definite advantages to being someplace with bright sunshine and low humidity.

We spent a long time researching a replacement.  The particular model/style of SpaceMaker we have has not been made for years (of course), was only available used (naturally), and only for exorbitant prices (can you believe $300?) on Ebay.  To add insult to injury all of the reviews were negative, noting in particular that the unit tends to develop leaks.  Ya think?  We looked instead for something we could install, or at least store, in the same cabinet cubby as the old one.  Most of the countertop models were too tall and most of the built-ins and under cabinet models were too big, and very expensive.  We ended up ordering a simple Proctor-Silex non-programmable countertop unit without a clock for under $20 on Amazon Prime so the price included the shipping.  The reviews were good and it will store in the corner cabinet with room to spare for coffee canisters, freeing up space in the pantry for other things.  We will have to take it out and set it on the counter to use it, but that’s OK.

As noted in a previous post, there are quite a few houses and RVs around town with Over-The-Air (OTA) TV antennas on top of 20-30 foot poles and pointed approximately NNE.  There is one antenna in particular that we have seen a lot, a high-gain (directional) rotatable unit, and there are several vendors selling it as part of a kit.  The unit has an integrated amplifier and rotor and includes the rotor controller and power supply, plus 50 feet of coax and control cables.  All of the vendors are selling this kit for $70.  That’s a lot of stuff for that price, which suggests something about its quality (not good).  Another vendor is selling the poles and fittings that all of the other vendors use to build their “booths” (tents).  They have a huge assortment of connectors and will cut the sections to length if asked.  Getting the antenna 20-30 feet in the air would cost about $35.  We have been pondering whether it is worth it to us to spend this money as our bus-mounted antennas have always worked in the past and this is the first place we have been where they will not pick up even a trace of a signal.  We do not have an OTA TV antenna set up at home and it occurred to me that buying one here made more sense if it could be used back at the house.  I spent quite some time online researching long-range DTV antennas but did not come to any conclusions.

I needed a break from working at my computer and drove over to K & B Tools to see if they had shorter poles.  In the 1″ diameter they had 10′ and 8′.  The 8′ length would work well for us.  Three sections with two connectors would get an antenna 20-25 feet up depending on the mounting and we can store 8′ lengths in the front bay of the bus or in the car for transport.  We would use a base section with a flange by the driver side mirror, put a couple of long spikes through the base to keep it from moving sideways, slip the bottom pole section in it, and bungee cord the next section to the mirror support arm after wrapping it with something to keep it from scratching the paint.  Before making a purchase, however, I decided to do some more online research.

The unit being sold by several vendors is the Vortex HD from SewellDirect.com so I checked their website.  The unit is discontinued and they are selling the same kit online for $25.  That means the unit is of even cheaper construction than I originally thought and the $70 asking price suddenly seemed very excessive.  Many of the online reviews confirmed that this was not a serious antenna.  Another vendor had the Vortex and two competing units all for the same $70 price and I have concluded that they are all equally junk.

One of the websites I spent some time at was AntennasDirect.com. They appeared to have some serious antennas, with prices to match.  One of the challenges in this situation is that it appears we need to pull in OTA TV signals from a very long way away here in Q (70+ miles), whereas at home the distances are more like 40 miles.  Here in Q all of the signals appear to be coming from the same direction (although no one can explain why) so a high-gain, highly directional antenna is ideal and does not need to be rotated once it is aimed.  At home the TV signals potentially come from 270 degrees and the correct solution is an antenna with a broader reception pattern combined with an accurate and repeatable rotor.  If we do not need the rotor in Q we can forego that expense and technical complication until we get home.

One of the websites directed me to www.antennaweb.org.  This site is sponsored by the Consumer Electronics Association (CEA) and the National Association of Broadcasters (NAB).  You enter your ZIP code, and optionally your address, and it tells you what TV stations you might be able to receive and what direction the towers are from your location.  I put in the ZIP code for Quartzsite and it indicated five stations (ABC, CBS, FOX, NBC, and Independent), all 11 miles away at 234.8 degrees.  There are towers on top of a mountain in direction but they do not look like TV towers.  The direction was also surprising as it is almost 180 degrees opposite to where everyone has their antennas pointed.

As we know from our ham radio hobby RF waves can do strange things.  At the frequencies used for OTA Digital TV (DTV), however, things are “line-of-sight.”  The local speculation is that there are “repeaters” to the NNE but if that was the case I would expect the website to indicate that as the signal direction.  Another possible explanation is that the signals are coming over the mountains to the SW and bouncing off of the more distant mountains to the NE.  I would expect some multi-path distortion in this case, as the signals scatter off the mountains and arrive at the antenna from different directions, but if the antenna is sufficiently directional it might eliminate this problem.

My plan for today had been to work on my Exterior Makeover article for Bus Conversion Magazine and I finally got started on that late in the afternoon.  I finalized my selection of photos (I think) and split them up into those that will go in line with the article, print and digital, and those that will appear in the extra section of the digital edition.  I had just begun post-processing them when Linda started preparing dinner.  I have been wanting some pasta and tonight I finally got my wish.  She made a whole wheat linguine with mushrooms, onions, garlic, kale, sun-dried tomatoes, and asparagus.  What a treat.

I stopped over at Butch and Fonda’s bus to let them know about the www.antennaweb.org website.  Butch was watching an archived webcast that Technomadia did a few months ago with Nina Fusing, of the WheelingIt blog, on health care options for full-time RVers.  He had also installed Echolink software on his laptop but it was failing the Internet Connection test for UDP (User Datagram Protocol) ports.  The error messages indicated that it was probably a firewall- and/or router-related problem.  He had both so I tried opening UDP ports for forwarding in both places but it did not fix the problem.  I have never played with Echolink or UDP ports, so I was trying to figure out what to do in real time.  More research will obviously be needed.

I continued working after dinner processing photos for my article.  I received my draft of the Zena Power Generating System article back from Gary with corrections made by Stacy, his new administrative assistant.  I accepted them, made an additional correction, and returned it.  They are trying very hard to get the December 2014 issue out on December 31st and my Zena article will be one of the four in that issue.

2014/12/27 (S) Cool Temps

By 6:30 this morning our various weather apps were reporting that the temperature in Q was 31 degrees F.  At 7:00 I turned the thermostats up and climbed back in bed (electric heating pad).  I had not shut the main water supply off at the street last night so at 7:30 I got up, put on my “sweats,” grabbed a jacket, and went outside to tend to the water.  I cracked opened a faucet at each standpipe, ran water through hoses, and ran water through the hot and cold lines for both sinks in the apartment.  I shut everything off and went back inside where it was comfortably warm.

By the time I came back in Linda was up and making coffee.  How was that possible?  We have a single serving coffee funnel that sits on top of a mug.  It’s designed for cone filters but she simply folded one of our flat bottom filters and made it fit.  She ground up some beans, boiled some water in the microwave oven, poured it over the grounds, and let it drip.  I did not think we would have morning coffee in the coach again until the new coffee maker arrived next week so it was a nice treat.

I finished yesterday’s blog post while I enjoyed my brew.  I was busy enough yesterday that by the time I went to bed and tried to finish it there was too much to write and I was too tired to write it.  Linda developed a headache overnight and spent much of the day medicated and resting.  She does not get these very often anymore but when she does they put her out of commission for a day or so.  I then spent most of the day processing the photos for my next BCM article.

I took a break after lunch and worked with Butch setting up his laptop to work with Echolink ham radio software.  The software use TCP and UDP ports and requires firewalls and routers to be configured to provide port forwarding.  His laptop OS is Windows Vista, which has the Windows Firewall.  I was not familiar with UDP ports, had never set up port forwarding, and had never worked with Vista, so I was feeling my way as I went.  Their computers are connected to the Internet one of two ways, MiFi or WiFi, although the WiFi is sometimes connected through the MiFi.  Their MiFi is a Verizon Jetpack (Novatel 5510L), just like ours, so I (sort of) knew my way around that device.  Their WiFi setup consists of two WiFi repeater/routers; the WiFiRanger Mobile and the WiFiRanger Go2.  We also have a WiFiRanger Mobile, so I also knew my way around that device (sort of) but I had never worked with the WFR Go2.  We got the Echolink software to test successfully through the WFR gear using the WiFi signal at our campsite but we could not get it to test successfully through the MiFi.

In the early evening Butch called and said he was having Internet connection issues.  I went to their bus and worked four a couple of hours trying to sort out what was going on.  I was able to get him back online but saw some strange behaviors that we could not explain and were not able to resolve.  He has Nick Russell’s Gypsy Journal Blog set as his Firefox home page and it kept redirecting to the website’s home page.  I tried opening it in Internet Explorer 9 and it opened without difficulty.  Website’s do not always react the same way with different browsers, but he had been on Nick’s blog earlier in the day using Firefox.  I will have to look at it again tomorrow.

When I got back to our coach Linda was starting to prepare dinner.  It felt very cold outside even though the weather apps said it was 41 degrees F.  I decided to turn off the water supply at the street and opened some of the faucets to relieve the pressure in the pipes and let some of the water out.  Dinner was leftovers from our Christmas Day meal and everything was very good the second time around.

I finished up my photo editing a little before 10 PM and backed up my files to the NAS.  We turned the three thermostats on and set them for ~15 degrees C (~59 degrees F).  We put the extra blanket on the bed and I turned my electric heater pad up to 4. The forecast low for tonight was in the low 30’s and it was already 36 when we turned in for the night.

2014/12/28 (N) Cooler Yet

Our cats snuggled in with us more than usual last night.  They like the extra blanket and the heater pads as much as I do.  At sunup the air temperature was reported as 28 degrees F, a few degrees lower than the last forecast we saw before we turned in last night.  If it seems that we are preoccupied with the weather it is because we are in closer contact with it when RVing than we are when we are at our house.  In the motorcoach we have to more actively manage our utilities to ensure they work properly and to maintain our comfort.

We had tea instead of coffee this morning.  Until about 15 years I did not drink coffee and enjoyed morning, afternoon, and evening tea.  Hot, of course; I have never been a big fan of iced tea and I have never developed a taste for iced coffee, unless it was a Starbucks Frappuccino (in my pre-vegan days).

Linda was finally feeling better and went for a long walk this morning.  Before she left I noticed that there wasn’t any water coming out of the bird fountain so she unplugged it and helped me partially disassemble it so I could clean it.  I ended up taking it completely apart, which was fun given that it was made of large slabs of granite, in order to get to the pump so I could clean it.  I was surprised to find a small gecko-like lizard inside the pedestal base.  Butch helped me reassemble and level the unit, allowing the reservoir to hold more water, and we got the outlet tube (fountain) tightened up so the water once again squirts about four inches above the tube.  It needs to be filled every day or two.  I have not determined if the water is being consumed by birds (there are a lot of doves and Gambrels Quail here) or evaporating (low humidity and sunshine).  It is probably a bit of both.

I worked on my article most of the day, inserting photos into the Word doc and writing captions.  I took a break mid-afternoon and rode into town with Butch.  We found the LED vendor where the hams (amateur radio operators) hang out but the booth was closed.  We wandered around looking at flea market junk and I found a set of four ratcheting tie down straps, 25mm wide by 15 feet long, for $5.  I had seen similar straps at another vendor for $14, so I bought the $5 set.  We stopped at Dorothy and Toto’s Ice Cream Parlor on west Main Street and bought some excellent kettle corn.

Back at the coach I continued working on my article but was having trouble keeping my eyes open so I took a nap.  Linda had started making dinner about the time I got up when a white SUV pulled in that we had not seen before.  A reddish-chocolate-brown dog appeared and took off after some of the rabbits followed by a man with a leash.  We figured Jim and Barbara, the owners of the third motorhome at our camp, had arrived so we put our shoes on and went out to meet them.  Jim got Roho on leash and Barbara appeared shortly thereafter, followed by Butch and then Fonda.  It was dusk and cooling off quickly, so the conversation was short before everyone returned to their motorhomes.  Before going in I turned the water off at the street and opened one of the faucets on our standpipe to relieve the pressure and let some of the water out.

For dinner Linda made skillet black beans with potatoes and tortillas.  Besides the title ingredients it had onions, garlic, poblano pepper, and salsa.  I added a little Tabasco Chipotle sauce to mine.  We each had a glass of sangria, which was refreshing with this hearty dish.  After dinner I finished working on my article and I uploaded it to the BCM folder in my Dropbox.  I sent an e-mail to the publisher, editor, and new administrative assistant.  I then started uploading the photo files and went to bed.

2014/12/29 (M) Cool Cruiser Redux

We had English Breakfast Tea to start our day, followed by store bought (bulk) granola for breakfast.  We have run out of Linda’s homemade granola and I really miss it.  The stuff we buy at the store just doesn’t taste like much of anything by comparison.  After breakfast I started working on my next article for BCM.  Actually, it was an article I wrote back in February of this year but had not quite finished.  Besides the text I had already selected the photos but, as often happens, I had not finished the process of putting them in order, sorting them into print edition and digital edition extra section, post-processing them, and inserting thumbnail versions into the Word document.  So that’s what I started working on this morning.

Late morning I took a break from the photo work and pulled the cover off of the dashboard to check the turbo boost gauge.  It was, indeed, a mechanical gauge with a very small nylon tube coming out the back of it.  I opened the Prevost CatBase Viewer and looked up the part, thinking I might order one today.  The specified part was a VDO gauge, 1/8-27 NPT, but did not give the mounting hole size, the, range, or the sweep degrees.  Both 24V and 12V bulbs were listed.  I think we need 24V.  What I found interesting was that the gauge for the VIP (conversion shell) was shown as “dummy,” which meant the unit was originally shipped with a filler plate rather than an actual gauge.  The turbo boost gauge in our coach is functional but is the wrong gauge for our engine. It’s a Sentry vacuum/boost gauge.  The vacuum side is useless on our turbocharged engine and the boost side only goes to 15 PSI, which is not high enough.

VDO makes two turbo boost gauges that should work as replacements.  Both are 2-1/16 (52mm) size, 0 – 30 PSI, 270 degree sweep, mechanical units.  They come with 12V bulbs but those are easily changed.  The differences are in the faceplate markings and the mounting systems.  The Cockpit Series gauge is marked in 1 PSI increments, which I prefer, but uses the traditional rear U-bracket to hold the instrument in the dashboard.  The Vision Series gauge, which is what our new speedometer is, has 2 PSI increments but mounts using a collar that threads onto the body of the instrument from the back side of the dashboard.  I was going to call Prevost and order a gauge but both gauges are available from PartDeal.com, which is run by ISSPRO.  ISSPRO sells their own line of gauges in addition to VDO and other brands.  I was chatting with Butch and he mentioned that they were closed for the holidays and would reopen on January 2nd, so I did not order a gauge today.

We left around noon and drove to the vendor area at Central Avenue and Kuehn Street.  We parked the car and wandered around checking out vendors who were not set up or open the last couple of times we were here.  While we were strolling I got a call from Frank Morrison.  Frank was at the Arcadia Bus Rally in Arcadia, Florida and wanted to know if we were there.  I photographed Frank’s bus, the Cool Cruiser, at last year’s rally and the article was the cover story in the June 2014 issue of Bus Conversion Magazine.  Frank said that in the welcome bag each attendee received there was a second bag from BCM and in that bag was the June 2014 issue.  Cool.  I wrote two other articles for BCM as a result of that rally.  The February 2014 issue was on the rally itself and the April 2014 issue featured the Iron Horse, an Eagle bus conversion.  Both articles ran in the cover/centerfold position.

For lunch we had chickpea salad on sourdough bread with dark greens and were surprised to see a Trek motorhome backing in to the property.  Jim and Barb obviously knew the people and helped them get parked.  Once they were in their site we went out and introduced ourselves, as did Butch and Fonda.  Jack and Maria were only here for the night.  They had been camped at the BLM Pyramid Lake LTVA, about 60 miles south of Quartzsite, but developed issues with their solar charger and a squealing/screeching noise when they start their engine.  They had appointments first thing in the morning to have these problems addressed and were planning on heading back to the desert tomorrow.  Barb mentioned that she had talked to Joe and Connie and Joe said we did not have to turn the water off at night.  One less chore is good by me.

Linda went for another power walk while I worked on my article.  I want to get my “almost finished” articles done and off to the magazine so I can work on some new pieces.  It’s easier on me and them if I can keep the pipeline flowing and stay ahead of them.

For dinner we had soy riblets with barbecue sauce, macaroni and cheese (gluten and dairy free), and fresh sautéed green beans.  The riblets were tasty, as always, and the green beans were excellent, but the mac & cheese was not good eats.  It was the second of two boxes we bought somewhere and Linda even added some things to try to improve them but it didn’t help.  We won’t be buying this product again.

Having spent a portion of the day processing photos I did not feel like doing more of that after dinner.  I played a few puzzles on my iPad while Linda played word games on hers with Karen and Ron.  We were in bed by a little after 9 PM and I went right to sleep.

2014/12/30 (T) Trash Day

Tuesday is trash day.  The collection truck comes at noon so the trash can has to be to the curb by 11AM.  I happened to glance outside as we were sitting down to enjoy our mourning tea and it was already at the curb.  Jim or Barb are responsible for this when they are here, along with maintaining the apartment and laundry room, and one of them had obviously taken it out.

Jack and Maria pulled out around 8:30 AM with Maria driving their Trek and Jack following in their SUV.  We figured we had seen the last if them and did not even get to say ‘goodbye’ so we were surprised when they returned an hour later and backed their motorhome back into their spot and leveled it.  They left in their car fairly soon thereafter and did not return until later in the day.

Linda went for her usual morning walk and I continued working on my Habitat For Humanity article for Bus Conversion Magazine.  Around 11:15 AM my Bluetooth mouse signaled that its battery was critically low and needed to be recharged.  I plugged it in and figured that was a good time to take a break and do something else.  Butch was outside with his tool bay open and Jim was out there with Roho so I went out and chatted for a while.  I needed to repair the connections on the front switch that controls the aisle lights so I borrowed Butch’s VOM, wire stripper, and terminal crimper and got three 1/4″ female crimp connectors from him.  I have all of these tools and supplies, but his were more convenient.

Being a 3-way circuit the switch has three wires.  It’s a double-pole double-throw switch so it had a second set of unused contacts.  I used the VOM to determine if the unused set of contacts worked as expected.  They did, so I removed the old connectors, one at a time, cut the wire loose from the connector, cut about an inch off of the end, crimped the new connector onto the wire, and pushed the connector onto the corresponding unused terminal.  I tested the circuit and I was able to turn it on and off from both switches.  (The other switch is in the control panel in the bedroom by my side of the bed).

My recollection is that the 3-way circuit feature did not work prior to this.  That could have been because the wire that broke off the other day was only attached by a few strands, or because of a failure in the switch on that set of contacts, or both.  The plastic insulated housings on the old connectors were very brittle and showed signs of heat damage, which could have occurred as the result of a very marginal connection.  When I tried to pull them off of the switch terminals they shattered.  I was also unable to pull the metal connectors off of the lugs and had to pry them open and then pry them off.  The first 1/2 inch of each wire was also discolored and brittle, indicating heat damage.  I did not bother to check the other set of switch contacts for correct function as the lugs also showed signs of heat damage and I do not plan to use them again.  In fact, I plan to replace the switch if/when I happen to find one or get around to ordering one.  The whole repair, including borrowing and returning tools, took less time to do than it took me to describe the work in this post.

Linda confirmed that our Fedex delivery was scheduled for today.  We have been rationing the cats’ food the last 48 hours and they are confused as to why.  They do not usually finish the dry kibble in their bowls but insist on having fresh kibble added each morning and evening.  To accommodate this expectation we have been adding very small quantities of fresh kibble to their bowls.  I don’t think cats can count, but they can definitely tell the difference between serving sizes of kibble and are not pleased at our puny offerings.

Jack and Maria returned sometime during the afternoon.  I saw them pull in but did not note the time.  We had sandwiches for lunch and then went for a walk.  We headed southwest from our campsite and worked our way over to Moon Mountain Avenue.  Our destination was the Salvation Army Store but we stopped to look at things along the way.  We checked out the Mountain Quail Cafe, but the only thing on their menu we could eat was the side salad.  Too bad, it looked like a cozy, comfortable place and the sign said they featured ‘home cooking.’  Well, not our home, of course.  ‘Home cooking’ is usually code for “everything is cooked in butter, we make liberal use of eggs and dairy, and treat bacon as a condiment.”

Moon Mountain Avenue between Main Street and Quail Trail seems to mostly be developments rather than individual lots.  We stopped at one place that had a lot for sale at the corner of Moon Mountain and the entrance road.  All of the lots were separated on three sides by the exact same low brick wall construction that we have seen all over town.  Some of the lots had the brick wall with a gate across the front.  As we were studying this lot the man across the street pulled out and drove over to see if we had any questions.  We really didn’t, but he answered them anyway.

It turned out that most of the developments on Moon Mountain Avenue were co-ops.  The price on this particular lot ($49,900) did not buy you a deed but rather a fractional ownership of the co-op with a lease for the perpetual use of that particular lot.  The price also included compensation to the current leaseholder for improvements to the lot, and whatever appreciation in value the market would bear.  You were free to sell your ownership share along with the leasehold for your lot, or will it to your children.  (This co-op, like many of the RV Parks in town, was a 55+ community, so it would be a long time before our “kids” could use it if they were interested, which I doubt.)  The annual maintenance fees for this co-op were $56/month ($672/year) and included water, sewer, property taxes, and association dues; everything except electricity.  Each site had its own billable electric meter.  The only added expense would be property taxes for improvements, such as a park model trailer or RV port.

We were glad we stopped and that this fellow was willing to share this information with us.  We suspect that many of the similar looking areas around town are probably also co-ops or even developments with deeded lots.  Every little thing we learn like this helps us develop a better understanding of Quartzsite.  BTW:  the Salvation Army store was closed.  We have walked or driven by at various times on different days and have yet to find it open for business.

When we got back to camp Linda needed a few things for dinner and thought the Road Runner Market might have them.  She grabbed Fonda and they took off in our car.  Butch was working on his HF mobile ham radio antenna on the roof of their bus and Barb was scurrying around the property taking care of things.  I was going to help Butch but got a phone call from Michele Henry of Phoenix Paint to discuss the spots on our roof and what to do about them.  Once we were done talking I was able to lend Butch some assistance with the antenna project which involved the installation of bonding (grounding) straps between the antenna and the roof of the bus.

The FedEx truck showed up before Linda and Fonda got back so I opened the box and unpacked the contents.  The kitties recognize Science Diet cat food bags and were very happy to see it.  I was opening the new coffee maker when Linda returned.  We got it unpacked and stored in the cubby where the old one was installed.  She had started cleaning and rearranging drawers before our walk so she finished putting everything away or set aside things she had decided she did not need to have on board.

I’ve been needing a haircut for a while and prevailed on Linda to take care of it while we still had sunlight.  After she was done I used the clippers to trim my beard and then put everything away.  Linda checked our log book and according to our records the last time we dumped our holding tanks was on the 20th.  We like them to be as full as possible before dumping, as they evacuate better but cannot let them overfill so we decided to dump them while it was still daylight.  Better safe than sorry.

I got another Hach SofChek water hardness test strip from Butch and checked the output of our water softener.  It measured 7 on a scale of 0 (soft) to 25 (very hard).  A reading of 7 is considered ‘hard’ water but the softener was still working somewhat as the water coming straight out of the tap measured 25.  We still had 1/3 tank of fresh water and I decided to add 1/6th of a tank, about 20 gallons, and bring it up to the 1/2 level.  I will have to recharge the water softener tomorrow before adding any more water to our tank.

I was able to finish editing photos while Linda prepared dinner.  She cut a large poblano pepper in half lengthwise and stuffed it with leftovers from two nights ago.  She also made Mexican rice from scratch using Texmati rice, onions, garlic, tomato sauce, cumin, and vegetable broth.  The peppers and rice were very good and went well with a glass of sangria.

Early this morning I thought I might finish my HFH article for BCM and be able to upload it this evening, but that did not happen.  I still needed to insert the thumbnails into the Word document and write the captions.  I was too tired to start that work, knowing how long that would take, so I played a few puzzle games and went to bed.

2014/12/31(W) Adios 2014

The polar outbreak that is gripping most of Canada and the U. S. A. has also made its presence felt here in Quartzsite.  The overnight low was 35 and we had light rain.  The high today won’t break 50, and the lows for the next two days are forecast to be in the upper 20s.  Not that far from us (~180 miles) Joshua Tree NP had a rare dusting of snow and the forecast for Flagstaff is for as much as 16 inches of holiday whiteness.  The temperature back home is in the teens, so we have no complaints about the weather in Q.

Linda went for a long morning walk and found the Salvation Army store open.  Apparently their hours are 8 AM to 1 PM Monday through Friday and we had managed to always walk past outside that time frame.  She picked up a few things from the Road Runner Market while she was out.  By the time she got back at 1 PM I had just finished inserting photos into my Habitat For Humanity article and captioning them so I had her proofread it.

With the proofreading done we had a bite of lunch and then drove to Blythe, California to pick up some grocery items that are not available here in Q.  We stopped first at the AutoZone store, in the northwest corner of the Albertson’s parking lot, and bought supplies for cleaning the bus.  Now all we need is a nice warm day so we can get out early and work at it until we are done.  We need to do the car, too.

We got a TXT message from our son while driving back to Q.  It was a short video of grand-daughter Madeline climbing into her car seat all by herself.  That led to an exchange of messages leading to the question from our daughter as to whether she could climb out by herself.  That question will apparently be answered tomorrow.  The growth from age one to age two is quite amazing.

When we got back to our coach I carried in the groceries.  While Linda put them away I added 30 gallons of water to our fresh water tank.  I really wanted to recharge the water softener first, and bought a 40 pound bag of solar salt at Albertson’s for that purpose, but it was too late in the afternoon and too cold to start that process.  I still need to fabricate the special perforated tube for the water filter housing, so it will take longer than a normal recharge.

We had some hot tea and cookies and relaxed for a while.  Linda finished proofreading my HFH article and I then went through it one more time to make sure it was ready to upload.  She also e-mailed Mara, one of the women who participated in the HFH build, to wish her a happy holiday and see what part of the country she was in at the moment.

Dinner was a simple, easy affair; a nice salad of fresh greens with other goodies mixed in and a couple of Asian noodle soup bowls.  Sometimes Linda does not feel like cooking and we keep a certain amount of packaged convenience food on board for such occasions.

It has been our tradition since we started dating in high school to stay up and celebrate the coming of the New Year.  We rang in three calendar changes while dating and have observed 42 more since getting married.  Tonight was number 43.  For all of that time we have rarely gone out on New Year’s Eve, preferring to stay close to home and off the streets.  Besides, large, loud parties have never been our style, especially since I do not dance.

When we were dating, and in the early years of our marriage, we would spend the holidays in the St. Louis, Missouri area visiting family.  My parents hosted a New Year’s Eve party that, in retrospect, was quite a large and well-attended event, and that is where we hung out, often joined by a few friends from our high school days.  As we attained legal age a champagne toast became part of the tradition (although in the privacy and safety of my parents’ home we probably started this tradition a bit sooner).

As our children came into the picture we still traveled to St. Louis but when they got a bit older we started spending our holidays at home.  Linda’s sister, Marilyn, started visiting us between Christmas and New Year’s and the tradition of assembling a 1,000 piece jigsaw puzzle on New Year’s Eve began.  Linda usually did not cook a New Year’s Eve meal.  Instead we had California Dip (made from Lipton’s Onion Soup mix) and chips, jumbo shrimp with cocktail sauce, smoked salmon, and other munchies that we nibbled on throughout the day.  This was, of course, all pre-vegan.  Starting around 11 PM we would turn the TV to one of the networks doing the countdown from Times Square in New York City.  I think it was ABC as we usually watched Dick Clark.  At 11:55 PM we would open a bottle of champagne and fill our glasses.  When the ball dropped and the clock struck 12 we would toast the New Year.

Since our children became adults they have spent New Year’s Eve with their friends and families.  Besides Marilyn we have had occasional guests at our house but more often it has been a quiet evening at home with just the two or three of us and we often went to bed shortly after the arrival of the New Year.  The last two years have been unusual in that we moved to a different house in 2013 but have never celebrated New Year’s there.  Given that we plan to do most of our extended RVing from mid-fall to mid-spring it may be quite (if ever) before we celebrate New Year’s at the new house.

For the 2013-to-2014 change we were at the Arcadia Bus Rally in Arcadia, Florida where we attended a party with 200 other people and a live band.  We spent much of the evening outside where the volume was about right and the temperatures were pleasant.  This year we are camped on private property in Quartzsite with three other couples, none of whom seemed interested in staying up until midnight, so we toasted the New Year in the privacy of our coach three times before going to bed.  We are unable to receive OTA TV signals here, so we watched (listened to) the ball drop in Times Square on Linda’s iPad (at 10 PM MST) and shared a champagne toast.  She then sent TXT messages to both of our children.  At 11 PM MST we shared another champagne toast.  I sent a TXT message to my sister and niece while Linda sent one to her sister, all of whom live near St. Louis, Missouri in the Central Time Zone.  At our local midnight we shared our final toast and welcomed the New Year in the Mountain Time Zone.  If we had been so inclined we could have driven to Blythe, California, returning temporarily to 2014, and celebrated the coming of the New Year in the Pacific Time Zone.  But we didn’t.  That kind of thing is more fun to “brag” about than it actually is to do.

Before turning in for the night I updated my article status spreadsheet and then uploaded it to the BCM folder in my Dropbox along with the HFH article and associated photos.  I then e-mailed the team at BCM to let them know it was there and wished them a Happy New Year.  I also e-mailed a link to a PDF version of the article to Steven Gullette, our team leader on the HFH build that was the main focus of the article, and wished him a Happy New Year as well.  So endith another year.  Adios 2014.

 

2014/12/21-25 (N-R) The Holidays Arrive

2014/12/21 (N) Winter Solstice

Linda was reading an interesting tidbit online this morning about the winter solstice, which occurs today in the northern hemisphere.  It usually occurs on the 21st, like today, but occasionally slips into the 22nd.  While it is the day of the year with the least hours of sunlight (between sun up to sun down) it is not the day with the latest sunrise (which occurred a couple of weeks ago) or the earliest sunset (which does not occur for a couple of more weeks).  Why is that?  Axial tilt, elliptical orbits, and a “day” that is not exactly 24 hours.  Science is fun.

Today was a stay-at-home / stay-in-town day for us.  Linda vacuumed the coach and mopped the floor tiles.  She says she likes to do this once a week to keep the cat hair under control.  By “likes” I think she means “needs.”  She also decided to do the laundry.  When we are at our house the laundry is usually my chore but for some reason, to which I am not privy, she takes over this chore when we are living in the RV, at least initially.  The same thing happened last year at Williston Crossings RV Resort, although we eventually both did laundry until I was able to win back my rightful chore.  So far again this year it has been her self-selected task here at Quartzsite and I have not gone out of my way to reclaim my rightful place as master of the laundry.

What I did instead of laundry was spend the morning finishing our 2014 Year-in-Review holiday letter.  Linda proof read it and then I converted it to PDF and did a final check of the layout to make sure the text and photos had not shifted or been clipped.  I copied it to a flash drive so we can take it someplace in Blythe tomorrow and have it printed.

The other day I noticed that the manifold pressure sensor (turbo boost) on Butch and Fonda’s 6v92 was mounted vertically on the front passenger side of the ECM.  I could not see exactly how it was mounted, however, so today I finally looked it up in the DD 92 Series manual.  I did not attempt to reattach our sensor module today but I was curious to see what would be involved.  I also continued to interact with other Prevost owners on the Prevost Community forum regarding the turbo boost issues and the dashboard gauge, which does not have the correct scale for our engine.  That thread has led to a dialogue about the SilverLeaf systems, including the VMSpc that we have, and an alternative system from RV Tech Tools that uses an iPad app named “RV Dash” and a wireless (WiFi) interface named “CANpod” from Cubix Labs.

With our various chores done we had a light lunch of chickpea salad on a bed of mixed greens and then went for a long walk.  The walk took us down Washington Ave. and then over to Kitsap Ave. to see a gorgeous Adobe house that Linda had discovered on a previous walk.  That led us to the backside of the west-central “vendor” (flea market) area on the north side of Main St.  We are not collectors, and we are not into antiques, guns, rocks, jewelry, or junk, so we saw very little that interested us.  We did see a few pieces of Pyrex, which our daughter and son-in-law were collecting at one time, and I am always on the lookout for a good deal on a tool I can’t live without, but mostly we saw endless quantities of stuff that we could not fathom anyone buying.

We crossed Main Street and visited the Tyson’s Well Stagecoach Stop Museum.  The grounds and building were open, admission was free, and it was unattended.  There were items for sale and if we had wanted something we would have put the money in the collection box.  That’s small town.

We headed east on Main Street and crossed back to the north side using the crosswalk at AZ-95 (Central Ave.).  We then continued east and stopped at the Road Runner Market.  We were pleased to find that they had a small but good selection of fresh produce.  On our way out the door the florist gave Linda a red and white carnation.  We will definitely be doing some of our local grocery shopping there.  We knew there was a restaurant/bakery on the far east end of Main Street so we kept on walking.  Sweet Darlene’s looked like a nice local place for a home-cooked style meal, but did not have anything on the menu we could eat.  The bakery turned out to be a small display case with pies and sweet rolls, but they did not make their own bread, so we won’t have any reason to come back.

By this time it was getting to be late afternoon, the cloud layer had thickened, and it was getting a bit chilly so we headed back towards Central Avenue.  We counted laundromats along the way, and passed at least four before getting back to our coach.  Not that we need a laundromat—we have a laundry where we are staying—but with all of the boondockers in and around Q it is a matter of some curiosity to us how/where they take care of things like this.  By the time we got back to our coach we had walked just over five miles.

Sunset over the Dome Rock Mountains due west of our encampment.

Sunset over the Dome Rock Mountains due west of our encampment.

By 5:15 PM the sun had slipped just below the mountains to our southwest and the sky started to glow pink for 360 degrees around us.  The sunset went on for over 30 minutes, the pinks deepening to reds.  And then, just like that, the color was gone and darkness enveloped the valley.

For dinner Linda made a simple green salad with raisins and peanuts.  She then heated up some vegan re-fried beans, pan-grilled a package of fajita vegetables she got from Connie before they left, and then heated two tortillas.  We each made a tasty roll up, adding some salsa and vegan sour cream.  She washed some black seedless grapes and set them out for desert.  They were very refreshing after the somewhat heavier and spicy main course.

2024/12/22 (M) Compressed

We had planned on driving to Blythe, California today but those plans changed fairly early in the morning.  Butch got an update that his air-compressor was on a UPS truck in Blythe and scheduled for delivery today.  I had promised to help him with the installation and provide a few tools he did not have with him so we decided to stick around camp.  We were also waiting for Connie’s realtor, Carolyn, to come by and pick up two yellow Post Office slips.

Linda took her morning walk after breakfast while I downloaded the October and November issues of Bus Conversion Magazine in both standard- and high-definition.  I was really glad to finally see these issues.  The October issue included my article on our T. F. Hudgins Spinner II Centrifugal By-pass Oil Cleaner project.  That was my one remaining article waiting to be published.  I have at least a half dozen in process, at least that many more for which I have taken photos (and written blog posts), and a very long list of future projects, so it’s time to get the next batch of articles ready to submit.

When Linda got back I drove to the print/copy/fax/pack/ship/etc. store on east Main Street to see if they could print our holiday letter.  They had plain 8.5×14 white paper, and the photos looked OK, but it was going to cost $4 per letter ($2/side) so I paid for the one copy and left.  They suggested that I try Weeks Printing in Blythe (20 miles west) or Staples in Lake Havasu City (70+ miles north).  Since we will likely head to Blythe tomorrow we will check out Weeks first.

As long as I was out I stopped at Barry’s Breads and bought a couple of fresh “rolls” which were really small loaves of bread.  Barry runs a little seasonal bakery out of a temporary vendor stand on the northeast corner of Central Avenue (US-95) and Kuehn Street.  Most of his products have butter or cream cheese as ingredients—his Danish pastries are as big around as a dinner plate—but he does make just plain bread and everything is made fresh daily.  Back in camp Linda called Weeks Printing and they quoted $1.25 for each 2-sided letter.  Much better.  We will check them out when we make it to Blythe; probably tomorrow.

For lunch Linda made a batch of her scrumptious chickpea salad/spread and served it on one of the rolls I bought at Barry’s.  After a week of cloudy skies, cool temperatures, and a little rain we finally had a day with clear, sunny skies and the high temperature up into the 70s.  Butch decided to remove his defective air-compressor and there wasn’t anything we could do to help (or stop him) so we decided to clean some more of our coach exterior.  I wanted to work from the top down, which meant starting with the roof.  That, in turn, meant getting out the Little Giant convertible extension/step ladder and setting it up as a 14 foot extension ladder.  In this configuration it extends beyond the top edge of the roof at the front, making it safer for me to get up on the lower roof area from the driver’s side.

Rinsing down the roof of the coach (photo by Linda).

Rinsing down the roof of the coach (photo by Linda).

The roof was very dirty and it appeared that we might have more than just embedded dirt to deal with.  The roof has a sprayed-on ceramic-infused white coating with a surface akin to medium grit sandpaper.  It reflects sunlight and provides a nice nap for walking on, but also traps dirt.  The last time the roof was cleaned was in early April, just before we left Williston Crossings RV Resort.  I had been on the roof subsequent to that, in our pull-through driveway at home, using it as a platform for trimming tree limbs.  I do not recall it being unusually dirty at that time, but I was focused on other things.  If it had been, I probably would have washed it, but maybe not; I was focused on other things.

I used a little bit of Dawn dish soap in several gallons of water and our soft, long handle, brush to try and scrub it clean and then rinsed it with softened water.  It was better by the time I was done but far from 100% clean.  I also scrubbed all of the metal awning covers and then hosed them off and rinsed the awning fabric.  When I was done on the roof I sprayed off all four sides of the bus, but even with the softened water it left spots and streaks.  Another unfortunate side effect of this work is that it frightened our male cat, Jasper, who ended up hiding behind the steering column in an attempt to escape the sights and sounds of a ‘monster’ on the roof.

We would like to get the body clean but there’s no point doing anything until I get the roof finished (Linda does not climb ladders and she does not get on the roof of the bus.)  At a minimum I am going to have to use a stiff scrub brush and a stronger solution of Dawn dish soap, or perhaps a commercial cleaner that can treat mold/mildew along with just plain dirt.  We will then have to do the vertical surfaces in small sections, scrubbing, rinsing, and drying as we go.  We have a sprayer for our hose that has a small bottle for additives and one of the reasons I bought it was to try using a dishwasher rinse aid, like Jet Dry, to see if it would eliminate spotting.  To-date, however, I have not tried that.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda's MC-9.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda’s MC-9.  The governor is the silver thing on the left.  The open port on top is the air discharge where the unloader valves are located.

Once Butch had the old air-compressor out of their bus he turned the input shaft and noted that the pistons were not pumping air.  This confirmed that something had failed internally and ordering a replacement was the right thing to do.  There wasn’t much else to do so we all sat around in the warm sun and waited for the UPS truck to show up, which it finally did around 3:45 PM.  We (me, Linda, and Fonda) suggested that Butch wait until tomorrow to start installing it, but we knew that was not going to happen.  The compressor was a significant road failure that had bugged him since it happened and he was anxious to get it fixed.

 

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The Bendix Tu-Flo 700 he received is designed specifically for mounting on Detroit Diesel 92 series 2-stroke engines but has more ports on it than are typically used in this application.  Making sure to match the configuration of the old compressor, Butch installed new plugs in the unneeded ports.  He then removed the fittings from the old unit one at a time and installed them in the new one, being careful to line them up exactly the same way.  I helped by holding the compressor on a work table while Butch tightened the pipe threads.  This was the easy part of the project as we were standing at a tall bench with plenty of room to work and good light.

 

The new air-compressor with fittings.  Note the alignment marks for orienting the fittings correctly.

The new air-compressor with fittings. Note the alignment marks for orienting the fittings correctly.  The spline is in the upper left of the photo.

The hard part was getting the air-compressor re-installed.  Butch eventually got it onto two of the four mounting studs, which then took the weight.  We discovered a clearance issue with one of the port plugs and he had to pull the compressor back out.  He removed a plug from the old compressor, which did not stick out as far, and reused it in the new compressor.  With the compressor back on the studs it now lined up better but the spline would not engage the drive gear on the end of the engine camshaft.  He put a wrench on the crankshaft pulley nut and turned the engine slightly by standing on the end of it while I jiggled the air-compressor.

The "governor" mounted on the new compressor.

The “governor” mounted on the new compressor.

The spline eventually engaged the engine gear and the air-compressor gear enough that Butch was able to fully seat the flange and insert/tighten the four mounting studs, lock washers, and nuts.  Per the instructions, he reconnected all of the lines except for the air discharge and called it a night.  The coolant goes back in tomorrow and Butch will then start the main engine to make sure the compressor works, check for leaks, and let any contaminants get blown out the discharge fitting.  If everything looks good he will attach the discharge line, which connects the outlet port of the air-compressor to the coach air system, and air up the bus.

The new air-compressor (blue) mounted on the rear of the engine block (towards the front of the bus).

The new air-compressor (blue) mounted on the rear of the DD6V92TA engine block (towards the front of the bus) in Butch and Fonda’s MCI MC-9B NJT.

At least we were successful in convincing Butch to wait until tomorrow to put the coolant back in the engine.  By the time we finished working, put our tools away, and got cleaned up it was 7:30 PM and had been dark for two hours.  Linda reheated the leftover fajita fixings and we had open-faced tortillas with Fritos corn chips, salsa, black grapes, and Sangria.  We were both tired so we relaxed for a while after dinner and then went to bed.

2024/12/23 (T) Blythe, CA

We got a call from Connie right after breakfast letting us know that the two packages Carolyn picked up yesterday were for us and Butch.  We needed to pick them up before 11AM as Carolyn had an appointment at that time.  Linda was headed out for her morning walk anyway so she walked to Rock Reality, near the post office and uptown drugs, to get the packages from Carolyn.  (Carolyn is Joe and Connie’s realtor.)  She dropped off the two P. O. Box – Mail Pickup Notice cards at the post office while she was there.

Our package was from Madeline (Brendan and Shawna), to be opened on Christmas Day.  Butch’s package was the unloader valve kits for our Bendix Tu-Flo 700 air-compressors.  He ordered them while we were in Forest City, Arkansas for delivery to Amarillo, Texas but they did not arrive in time so his friend forwarded them to our Quartzsite location.

Butch and Fonda used most of the morning to put the coolant back into the engine.  Our buses, which still have their over-the-road heating systems, hold a lot of coolant.  Ours requires 34 gallons.  The buses are not identical, but I suspect theirs requires at least 30 gallons.  And it is very important that the cooling system is filled to capacity and has had all of the air purged out of it.  It’s a big, messy job.

They got as much in as they could by standing on a ladder and pouring it through a funnel into the filler tube for the surge tank.  The radiators on the MCI MC-9 are located above the engine, one on each side wall at the rear of the bus, and the surge tank is located above them, so the filler tube is approximately 9 feet from the ground.  Butch started the engine to warm it up enough for the thermostat to open and to circulate the coolant and opened a couple of bleeder valves to let air out.  He also checked the outlet fitting on the new air-compressor to verify that it was pumping air.  It was (hurray!), so he shut the engine off, attached the air line to the outlet fitting, and started it back up.  The chassis air system (suspension and brakes) came up to pressure and the air-dryer “sneezed” (momentarily opened its purge valve) so the system was fully operational.

We planned to go to Blythe, California today and Butch and Fonda wanted to go too, so he shut off the engine and they cleaned up their campsite.  We were sitting in our coach when the winds came up rather strong.  Linda checked the weather and the winds were out of the north at 20 MPH and forecast at 22-25 MPH until 6 PM.  That was strong enough for us to retract our awnings, close our roof vents, collapse our folding chairs, and stow our patio mat.  Butch and Fonda also retracted their patio awning and stored all of their outdoor equipment and furniture.  We had the old patio awning on our Itasca Sunrise torn off by strong (thunderstorm) winds while we were away from the motorhome and have been extra careful about awnings and wind ever since.

With all of that done we headed to Blythe in their Chevy Suburban.  From 879 feet ASL in Q we climbed to about 1200 feet ASL over the low mountain range that separates the two valleys, and then descended to 240 feet ASL as we crossed the Colorado River and entered California.  A few miles later we took the 7th Street exit and we were there.  The 20 mile drive was only five more miles than the trip we made from Williston Crossings RV Resort to the Publix grocery store (at the southwest corner of Gainesville, Florida) last winter, so it did not feel like a long way to go for groceries.  At home we have supermarkets about five miles away in three different directions.  Butch and Fonda typically drive into Logansport for their groceries, a distance of 12 miles, so we are all used to traveling some distance to purchase our food.

The Smart & Final Extra and the Albertson’s were on the NW and SE corners of 7th and Hobsonway, just north of I-10, making them especially convenient for us, so this is where we will likely shop every other week or so.  But our first destination was a few blocks farther west on S. Main St. where we found Weeks Printing.  They were eventually able to access our flash drive and open the PDF of our holiday letter.  They had a high quality paper in 8.5”x14” size, and were able to print our letter 2-sided on a good quality color laser printer for a very reasonable price of $1.25 per letter ($0.625 per side).  They did not take credit cards so we paid cash, but it saved us a 73 mile trip (one way) to Staples in Lake Havasu City.

Self-portrait of the blogger.  I am merely a reflection of my former self.

Self-portrait of the blogger. I am merely a reflection of my former self.

At the Smart & Final Extra we bought fresh produce, soy milk, and some bulk, canned, and packaged items.  They did not carry the Silk brand soy coffee creamer that I like, and there were a few items Butch and Fonda needed that the store did not have, so we drove across the street to Albertson’s and got those items.  I stayed in the car with the groceries, but I already knew that the Albertson’s would be a nice store based on our experience with the chain in Sheridan, Wyoming during summer 2013.  With our shopping done we returned to Quartzsite.

I carried the groceries from the car to the bus and Linda stored them, discovering that she had an empty tub available in the cabinet above the refrigerator.  By the time she was done it was approaching 4 PM so she prepared chickpea salad sandwiches as a quick, light lunch and then announced that we should go for a walk before it got dark.  She let me chose the route so we crossed Central Avenue (AZ-95) and walked to the city park, which has a very nice baseball field with lights and the only grass we have seen in Quartzsite.  There was also a skateboard facility, a football field, and two F4 Phantom jets (minus the engines and other equipment).  The Quartzsite Metal Detecting Club (QMDC) has a practice field adjacent to the park.  The park is located near the following municipal facilities:  Community Center and Library, County Court, Police Station, and Post Office Annex (where most of the P. O. Boxes are located).  The Fire Department is a little farther north on Tyson Wells Street just east of Central Avenue.

The sun was getting near the tops of the mountains to our southwest so we headed pack to our coach and settled in for the evening.  For dinner Linda made a barley risotto with garlic, shallots, mushrooms, sun-dried tomatoes, vegetable both, and seasonings.  While she was cooking I got a call from my dad and got him caught up on our whereabouts and activities.  The risotto was excellent and we each enjoyed a glass of sangria with our meal.

I don’t know if we are just relaxed, or really tired after a hard summer and fall, but we have both been going to bed earlier and waking up later than usual.  Or perhaps it is just the effect of fresh air and sunshine.  Whatever the reason, it’s nice to be able to just sleep when that is what we feel like doing and get up when we are read.

We have an excellent Verizon signal here in Q.  Linda often likes to pace up and down Lollipop Lane while talking on the phone.  If you lived on Lollipop Lane you would too.

We have an excellent Verizon signal here in Q. Linda often likes to pace up and down Lollipop Lane while talking on the phone. If you lived on Lollipop Lane you would too.

2014/12/24 (W) Christmas Eve

It’s Christmas Eve and we woke to a temperature of 37 degrees, clear skies, light winds, and no snow.  The forecast high for today was 66, with no snow.  Do I miss snow at the holidays?  Not really.  At one time (high school) I considered myself something of a “romantic” in the sense that I liked the classical music of the romantic era, but I am not particularly nostalgia.  If I was, we would own a restored 1957 Chevy; red, of course.  No, we had snow at home before we left and as a harbinger of things to come we took it as a sign that our departure was overdue.  Christmas in the desert will be a new experience for us, but so far it looks very agreeable.  We will miss being with family, of course, but we are not alone here and technology keeps all of us much more connected than it once did.

Having been to Blythe yesterday we did not have any last minute shopping to do today.  The desert was there yesterday and will be there tomorrow (I presume) so we did not have to see it today.  With the holidays upon us I did not feel like working on bus projects.  Linda started addressing the envelopes for our Year-In-Review Holiday Letter and then worked on food preparations for tomorrow’s dinner with Butch and Fonda.  It seemed like a good day for me to finally start catching up on some things that I have not had time for in a while.  For instance, I need to work on articles for Bus Conversions Magazine, update our bus project list/status, update our website, upload some blog posts (OK, a LOT of blog posts), and catch up on the blogs I follow using the Feedly app on my iPad.  I am way behind on all of these tasks and starting to feel some pressure about it, albeit self-imposed.  I do not have to do any of these things if I don’t want to, of course, but they are activities that I enjoy and want to do.  Still, being way behind takes some of the fun out of it and makes it a bit more like work.  I won’t get caught up in one day or one week or even one month; it will take many weeks of persistent effort.

After checking e-mail, I settled in to work on my article about the exterior renovation of our motorcoach.  Michele Henry of Phoenix Paint helped me finish the article in early October but I still needed to select and caption all of the photos.  While I worked on that Linda walked to the Road Runner Market and managed to snag the last 3-pack of yeast.  When she got back she made her orange cranberry relish for tomorrow’s dinner.

We took a break for lunch and then Linda headed out for her daily power walk.  When she got back she continued addressing envelopes for our holiday letter.  Just as I was feeling like I needed a break, Butch knocked on the door to let me know he was working on a small project that might interest me.  He had already burped the coolant lines that supply heat to the living area of their bus when driving and gotten the last of the coolant into the system.  His new project was getting an alternator driven tachometer connected and calibrated.

It turned out that he needed positive DC power to the tachometer in addition to the ground and RPM signal.  He was able to temporarily pick up 24VDC from the positive terminal of the starter, found a convenient ground point, and picked up the rotational speed from the stator terminal on the back of the alternator.  With the engine running at low idle he measured the RPM of the main crankshaft pulley using an optical sensor instrument.  It was just over 600 RPMs so he adjusted the tach via a set screw on the rear to match the reading.  He kicked it into high idle and measured the rotational speed as 950 RPM.  That is what the tach displayed within the precision of the markings.  He already has a signal wire run from the engine compartment to the cockpit but needs to mount the tachometer in a separate bullet housing, connect the wire on both ends, and provide positive and negative (ground) DC to the instrument.  He decided not to take on that project today.

(Note:  RPM is universally understood to be an abbreviation for “Revolutions Per Minute” but that is not necessarily correct.  An object such as the pulley on the end of an engine crankshaft rotates about its own axis, just as the earth does, and has angular velocity which is properly measured in rotations per some unit of time or angular displacement per some unit of time.  The abbreviation is, of course, still RPM.  In the case of the pulley, however, Butch put a small piece of white tape on the face of the pulley at the outside edge to act as a target for his optical sensor.  If we consider the piece of tape as a separate object then it does, indeed, revolve around the center axis of the pulley, just as the earth revolves around the sun.  Viewed thus way, revolutions per minute is technically correct.  As with many things in physics, it depends on your frame of reference.  So much for today’s physics lesson.)

This building houses (L-2-R) the laundry room, the apartment, and a small workshop.

This building houses (L-2-R) the laundry room, the apartment, and a small workshop at our compound.

As long as I was outside I borrowed Butch’s metal detector and went in search of a couple of tie downs that Joe told us were buried somewhere near the outer edge of our patio awning.  I knew they were lined up with a reference mark on one of the concrete patio slabs and it did not take long to locate and uncover them.  We put a couple of medium-sized rocks on top of them so we could relocate them easily.

We got several multimedia messages from our son today with pictures of our grand-daughter at our daughter’s house helping make cookies.  Brendan, Shawna, and Madeline are spending the night and Katie is joining them tomorrow.  Butch and Fonda will spend most of the day at the local church Fonda selected, including a carry-in (pot luck) luncheon, but will have dinner with us around 6:30 PM.

I finally returned to our coach and worked on my article about the Zena power generating system I installed to charge our house batteries while driving.  Again, the article was mostly finished a long time ago, but I could not submit it until I completed the installation, got the system operational, and took a few more photos.  All of that happened in October and November but I was too busy with other projects and preparations to pull it all together at that time.  I had a couple of e-mails today from Gary, the publisher of Bus Conversion Magazine, indicating that the December 2014 issue might not be out until early January 2015, and wondering if I might have a finished article they could use.

For dinner Linda made a salad of dark mixed greens with raisins, nuts, and pear slices drizzled with raspberry walnut vinaigrette dressing followed by pan-seared tofu slices with caramelized onions and bar-b-que sauce served open-faced on hamburger buns.  We split a Sam Adams Pumpkin Spice Ale.  I am not a big fan of ales or pumpkin but beer seemed like the right beverage for this dish.  It was OK, but I would have enjoyed a Yingling or Shiner Bock more.

I made good progress on both articles today.  I got an e-mail from Mike, the editor of BCM, wondering if I had a finished article.  The ZENA article was close enough that I decided to finish it and upload it to our Dropbox before going to bed.  I e-mailed Mike back to let him known it was there and offered to finish the other one by the end of the weekend.

Earlier in the day I updated our personal WordPress site to the just released version 4.1 and updated several plug-ins and themes.  My last task before turning in for the night was to replicate the update process on the other three sites I manage.  By the time I got to bed it was Christmas Day.

2014/12/25 (R) Christmas in Q

The wind came up strongly overnight and we were awakened by the rattling of the vent fan domes.  From our north facing bedroom window we could see flags and the tops of trees blowing briskly in the wind.  We could also hear and see the awnings on the south/passenger side of the coach flapping.  Linda checked the weather channel app on her iPad and it reported winds at 20 MPH.  We were not expecting winds that strong until the daytime and they were strong enough for us to be concerned about our awnings.  By that point we were wide awake so we put on our sweatpants and shirts, slipped on some shoes, found a set of keys, got the step-stool out of the front bay and the awning rod out of the folding chair bay, retracted the two awnings, returned the rod and step-stool to their respective storage compartments, and finally went back to bed.

Linda got up at 6:30 AM in order to start making cinnamon rolls from scratch.  I usually get up first and make a pot of coffee but I was up past midnight working, so I slept in for another hour.  The yeast she bought yesterday wasn’t cooperating so we turned on one of the Broan ceramic cube heaters to try and create a warmer and more consistent environment to get the dough to rise.

We borrowed Butch and Fonda’s Verizon MiFi (unlimited data plan) so we could Facetime with our children and their families, who were gathered at our daughter and son-in-law’s house.  We got to watch all of them open the presents we left for them when we were there on Thanksgiving and they got to watch us open the gifts they sent with us or shipped to us here in Quartzsite.

Brendan, Shawna, and Madeline (son, daughter-in-law, and grand-daughter) sent a 2015 Shutterfly Calendar with photographs of all the different family members placed on the dates for birthdays, anniversaries, and such.  We do not need much at this point in our lives, but a collection of photographs that also reminds us of the people and dates that are most important to us is something we appreciate and treasure.  Meghan and Chris (daughter and son-in-law) bought us each a genuine Tilley hat.  I have known about these hats for a while but never bought one.  Given our outdoor oriented RV lifestyle, these were excellent gifts.

After we were done with our Facetime session Linda took the cinnamon rolls over to the apartment to bake since it has a range with an oven.  She will finish cooking dinner there later and the four of us will eat there this evening as it has a table that will seat four people.

The apartment bedroom.

The apartment bedroom.

In spite of early indications to the contrary the cinnamon rolls rose and baked just fine. The dough used flour, salt, vegan butter, yeast, and flax meal with water (egg substitute) and a little sugar.  The filling was made with brown sugar, vegan butter, cinnamon, and maple syrup.  The topping was a glaze of sugar, water, and vanilla with raisins and chopped walnuts.  Linda took two of them over to Butch and Fonda and we had some for breakfast still warm from the oven.  It’s a good thing that these are as much work to make as they are or I might want them for breakfast every day.   🙂

Linda had a call and TXT message from her sister (Marilyn) and sent a reply.  She was on her way to her housemate’s family gathering and they agreed they would talk later today.  She also sent merry Christmas TXT messages to her sister-in-law, Mary, and good friend, Diane.  At noon our time (1 PM CST, UTC-6) I called my sister to wish her a happy holiday.  Her daughter, grand-daughter, and future son-in-law had already been there in the morning as Ryan had to work that afternoon.

I made a second pot of coffee, which is unusual for us, but we planned to spend the day lounging around the coach cooking (Linda) and working on the computer (me).  Linda cleaned up the breakfast cookware, poured another cup of coffee, and started working on the chocolate cake for tonight’s dessert.  With the cake prepared and in the apartment oven she turned her attention to making the candied yams.  Once those were done the only thing left to do was bake the Tofurkey, roast the asparagus, and heat the gravy.  It was a lot work for her but it was spread out over two days and she enjoyed, and did it, willingly.  We could have gone out for dinner if she wanted, even though we would not have found much we could eat, but I am glad she preferred to cook.

Once I wrapped up the conversation with my sister I got back to work on the Outside Makeover (Exterior Renovation) article.  Although I thought I was done writing I made a few more edits and selected additional photos.  By 5 PM I had 74 photos selected and placed in sequence to match the flow of the article.  I had also done as much of that work as I cared to for the day.

We were down to 1/4 tank of fresh water so I decided to refill it.  About that same time Linda decided it was chilly enough in the apartment that she wanted the propane space heater turned on so I shut off the water and took care of that.  The heater had a hose that went through the wall at floor level to the outside with a regulator and POL fitting on the end of it.  I found a couple of 20 lb. propane tanks in the workshop and connected one of them to the regulator.  It took a while but I eventually got the pilot flame to light and then got the heater to ignite.  I then went back and finished filling our water tank.

The little apartment is very cute with three rooms: a bathroom on the east end, a bedroom on the west end, and a kitchen/dining/living room in the middle.  It has a shower, a 4-burner electric range with an oven, a refrigerator/freezer, a small microwave oven, the aforementioned space heater, a small window air-conditioner, a small TV/monitor with a satellite receiver, two easy chairs, a small dining table with four chairs, and a queen sized bed.  Marilyn is seriously considering coming for a visit the last week of January and if she does she will stay in the apartment and get to experience Quartzsite.

Linda starting to set the table in the apartment for Christmas dinner.  No pictures of Butch & Fonda (they are camera shy).

Linda starting to set the table in the apartment for Christmas dinner. No pictures of Butch & Fonda (they are camera shy).

We bought a bottle of Sternthaler Nurnberger Christkindles Gluhwein spiced red holiday wine at Central Market in Fort Worth, Texas to serve with our Christmas dinner.  It is a mulled wine that is supposed to be gently heated before serving, but we found it quite agreeable straight from the refrigerator.  About 20 minutes before dinner time we set it out on the counter to warm up slightly, the space heater doing a very effective job heating the small apartment even on its lowest setting.

Linda and Fonda both contributed dishes to the meal and Fonda made a couple of things that we could eat.  They brought chicken and traditional mashed potatoes for themselves but also tried some of the Tofurkey roast.  Linda made a vegan chocolate cake for dessert and whipped refrigerated coconut milk solids to use as a whipped cream substitute.  Our daughter did this for the Thanksgiving meal and we really liked it.

We sat in the apartment for a long time after dinner and just talked until we were all tired.  Linda and Fonda had already cleaned the dishes so we turned off the propane space heater and carried all of our stuff back to our coaches.  Linda put the leftovers away while I did a final check of my e-mail for the night.  I then shut my computer off and we headed to bed.  Like so many things in our retirement RV lifestyle, this Christmas holiday was a new and good experience.

 

2014/11/17-23 Bus Work Wrapup

2014/11/17 (M) Bypass Extension

12VDC outlets on lower center cockpit console.

12VDC outlets on lower center cockpit console.

After my usual breakfast I decided to change the drinking water filter cartridge under the kitchen sink.  The new one arrived UPS on Friday but I wasn’t really eager to change it, given the difficulty I have had with it in the past.  As I expected, the old one did not come out exactly the way the instructions said it would and I fussed with the new one for 30 minutes without being able to get it in.  Butch popped into my bus to see what I was up to and I enlisted his assistance.  We fiddled with it for another 45 minutes and finally gave up and put the old one back in, although it did not go in easily.  Clearly we were doing something wrong but could not figure out what it was.

I am not exactly sure what Butch and Fonda did for most of the rest of the day but whatever it was they did not need my help.  I know they drained some coolant from a hose on the main engine and changed a short piece of hose.  Having gotten off to a bad start with the water filter cartridge I decided to pick the coach up a bit and then work on the 12 VDC outlets for the cockpit accessories.

There’s no such thing as a “small job” on a bus conversion; there are only big jobs and really big jobs.  The installation of the 12 VDC outlets involved mechanical and electrical considerations; I needed to mount them someplace that was accessible but out of the way, and I needed to be able to get 12 VDC power to that location.  There is a vertical panel about five inches wide just to the right of the driver’s right leg.  It runs from the floor up to the bottom of the dashboard and houses two thermometers, a cigarette lighter, and a swing out ash tray.  The panel comes out after removing six screws.  To the right of that panel is a house systems switch panel that was added by Royale Coach.  It is about 10 inches wide and comes down from the dashboard half way to the floor.  After checking to see what was behind the vertical panel I decided to mount the outlets to the passenger side of the floor-to-dash enclosure.  I mounted them below the bottom of the house systems switch panel and slightly back from the front plane of the dashboard.  They are very accessible in this location but tucked back out of the way enough to avoid getting kicked.

Just above the house systems switch panel is an enclosure for the CB radio.  I had previously removed the four screws that secure the front panel and pulled the CB radio out of its enclosure.  The power leads used spade connectors so they were easily disconnected and the incoming power harness was long enough that I was able to drop it through the speaker hole in the bottom of the radio enclosure and behind the house systems switch panel.  I also disconnected the antenna coax, as it is not connected to anything on the other end, and dropped it through the speaker hole as well.  I added compatible spade connectors to the wires from the 12VDC outlets including a 2-wire pigtail so I could connect both DC negative wires to the one available DC negative line.  I drilled a hole for the outlet wires to go through into the space behind the vertical panel as I would eventually like to power them from there and reconnect the CB (once I get an antenna mounted).  For now, however, this arrangement will do what I need it to do; power the various cockpit accessories while keeping the power cables out of from under out feet.

By 1:45 PM I had completed the installation of the outlets but I had not re-installed the various panels.  I locked up the coach and the three of us got ready to go to Logansport to run various errands.  Butch was wrapping up a conversation with International Thermal Research regarding the installation of his Combi unit and getting answers to a few remaining questions.  It turned out that the reason the coolant circulation pump was running was that we had left the bypass switch on the Zone Control Board in the ‘ON’ position.  That was also why the Summer Mode light was on.  Butch turned the bypass switch off and the various indicator lights all seemed to indicate what they were supposed to show.

I ended up buying the parts for a drinking water filtration system at Home Depot.  I got a GE Drinking Water Filter Housing and filter element plus a collection of hoses and fittings to connect it to the existing 3/4″” OD copper plumbing under the kitchen sink.  I also picked up a can of flat black spray paint to use on the accessory mounting board for the windshield center pillar.  We stopped on the way back in to Twelve Mile to pick up Daffy from the local veterinarian.  Fonda had taken her there earlier and dropped her off to have her teeth cleaned.  Daffy was still pretty groggy but glad to have the comfort of her owners.

When we got back to their house Fonda helped me set up some cardboard to catch any overspray and I sprayed one side and all of the edges of my center pillar board.  I then headed to my coach and finished putting the dashboard panels back in.  After that I turned my attention to the drinking water filtration system.  It took me a couple of hours but I got the old filter head removed, mounted the new housing, and made all of the connections.  I installed the new filter element and turned the water pump on, opening valves one at a time as I worked downstream looking for leaks.  The only leaks I saw were small ones between the 3/8″ brass pipe nipples and the 3/8″ female pipe thread sockets in the plastic filter housing.  Both leaks were easily remedied with an extra turn of the right angle shutoff valves.

I had not quite finished the water filter project when Fonda came out to let me know that Linda was on the house phone.  She answered some accounting/tax questions for Butch and then we chatted for a bit.  We decided that I would move the Martin Diesel appointment from this Thursday to next Monday, if possible, as the weather should be much more agreeable.  That will also give me four additional days to work on bus projects here, which I need.

I returned to the coach, finished up the plumbing, made a quick dinner, cleaned up the dishes, and went in the house for the evening.  Butch and Fonda had already gone to bed so I did the same and dealt with e-mails and this post.

New drinking water filter and hoses under the kitchen sink (in the bus).

New drinking water filter and hoses under the kitchen sink (in the bus).

2014/11/18 (T) Holes and LEDs

We were all busy all day today but did not have as much to show for it as we have on some other days.  That’s the way it goes with bus projects.  I worked on three separate projects for our bus and helped Butch and Fonda with one project on their bus.

The first thing I did after breakfast was to spray another coat of flat black paint on the oak board I plan to use as a mounting plate for various cockpit accessories.  I then went to work on enlarging the return air openings above the shelf in the rear closet.  This turned out to involve quite a bit of work.  On the passenger side I had to cut the carpeting on the inside of the closet and peel it off.  I then drilled a hole in each lower corner to allow access for a sabre saw blade.  I borrowed Butch’s cordless sabre saw, so that involved getting the saw from the parts room.  I cut from the back side, as I had access via the rear TV cabinet, and enlarged the opening to about 10″ x 10″.

I did not have access to the back of the panel on the driver’s side so I had to take a different approach.  I removed the lower panel which gave me access to the space and the various relays mounted on the floor of the cabinet.  I needed to make sure there wasn’t anything on the back side of the upper panel where I intended to drill and cut.  I borrowed Butch’s lighted inspection camera, which required another trip to the parts room, and used it to look up inside.  It was clear, so I cut the carpet on the inside of the closet and removed it.  Working from inside the closet I did not have room to use the sabre saw, so I used my oscillating saw to cut the opening.  Once the panel was cut through on both sides and the bottom it still had the metal mesh stapled to the top back side.  I was able to use that to pull the mesh loose from the fixed panel and remove it.

The next step in this project will involve installing a pair of 12″ x 12″ return air grills after I vacuum up the debris from the drilling and cutting process.  Home Depot carries these grills but was out of stock when we were there last night.  They are supposed to be in tomorrow or Thursday.  I already have a roll of 1/4″ grid hardware cloth and I plan to cover the openings with a piece of that to make sure mouse-sized critters cannot get through the slots in the grill, which will go over the hardware cloth.

By the time I got to this point it was time for a quick lunch.  After my meal I checked in with Butch and he was at a point where he needed assistance attaching an aluminum angle to the driver’s side front ceiling.  This angle would serve as the attachment for the vertical face of the chase that will hide the wiring running along the junction between the wall and the ceiling.  With Fonda’s help we held the first piece in place and secured it with one screw near the rear end.  We then measured down from the center trim of the ceiling and adjusted the other end to keep the angle as close as possible to parallel along its entire length with the ceiling centerline.  With that piece mounted Butch clamped another piece of angle to the mounted one, giving us a nice straight extension of the line, and then clamped the second piece to be installed to the extension angle.  I then secured the second piece to the ceiling with several screws.

Butch held 3″ Wiremold channel in place from the front air-conditioner trim to the gap between the two angles we just installed and marked it for length.  Fonda cut those while Butch cut a piece of plywood to the width and length needed and then installed them.  We talked about putting up the chase on the passenger side, or at least the Wiremold channel for the fluorescent ceiling lights.  Butch said they planned to make that chase deeper, and I suggested they bring it out as far as possible and build it as a cabinet using a face frame with several stiles (vertical pieces) and one long, top-hinged, door.  They both made note of the idea but did not want to get involved in that today.

I took a short break to call Martin Diesel and move my generator service appointment from this Thursday to next Monday.  I have more to do on the bus than I can complete by Wednesday afternoon and the weather Thursday morning is forecast to still be very cold.  The cold spell is supposed to finally break on Saturday with highs in the 50s and lows in the 40s.  I should be able to hook up the care and leave early Monday morning in 43 degree weather; much nicer than 18 degrees (Fahrenheit).

I now turned my attention to the LED replacement lighting for the F72T12 fluorescent light fixture in the hallway cove.  The first thing I needed to do was locate the 12 VDC positive and negative wires that were controlled by the pair of three-way switches; one by the pantry and the other in the bedroom.  In spite of having the wiring diagram for the old fluorescent ballast on a label attached to the ballast, I was not able to trace out the wiring.  Butch came over to see how I was doing so I enlisted his assistance.  The situation had us both puzzled for a while but we eventually sorted it out by removing the two 3-way switches from their junction boxes and checking for voltage to chassis (DC) ground at various points.  It helped that there is a second light fixture in the hallway ceiling just outside the bathroom door that is controlled by these same switches as this allowed us to know when there should or should not be voltage present at the main fixture.

With the wiring sorted out I made a short jumper wire with male spade terminals on each end and used it to jumper the red and white wires together in the base of the panty.  The white wire turned out to be DC negative (ground) and the red wire ran to the far (rear) end of the chase, so this provided a ground connection at the far end of the chase.  I recoded them with black tape.  The other red wire at the far end of the chase was the switched +12 VDC so I now had what I needed to power the LED rope light in that space.  I reinstalled the switches and cover plates and put the removable bottom shelf back in the pantry.  (The old ballast and wiring is still under this removable shelf.)

The LED rope light can be cut every few inches but I decided I should test it to make sure it worked before I started cutting it into smaller pieces.  I uncoiled the rope, which is supposed to be 52.5 feet long, as the instructions said not to apply power to it when it was coiled up.  I attached male spade lugs to the free end of one of the power cords, made my best guess as to the polarity of the rope, attached the power cord to one end of the rope, plugged the spade lugs into the two red wires in the chase, and turned on the switch.  Voila, I had guessed correctly on the polarity.  I checked the full length of the rope and all of the LEDs appeared to be working.  I need to check the length of the rope tomorrow to make sure it is the correct length.

The rope light came as a kit that included power cords (10), end caps (10), center connectors (10), and mounting clips (50).  This should be enough material to eventually redo all four of the fluorescent cove lights and add lighting around the inside face frame of a closet or two.  The lower portion of the center rear closet does not currently have any lighting and the main closet in the bathroom could certainly use more/better lighting.

I tried installing the mounting clips without much success.  It was night by this time and dark enough in the hallway that I couldn’t really see what I was doing.  As much as I wanted to the have this fixture functioning before I quit for the evening, I knew I had reached the end of this work for the day.  Rather than frustrate myself, and perhaps mess up something, I cleaned up my tools and materials and made dinner.  I had a Thai Kitchen Hot and Sour Rice Noodle Soup Bowl to which I added chopped up fresh mushrooms.  It was just the thing for a chilly evening.  I gathered up the day’s dishes and took them in the house to put in the dishwasher and then locked up the bus for the night.  I put another coat of flat black paint on my mounting board and then turned in for the evening to work on e-mail and this post.

2014/11/19 (W) Radio Woes

I was up a little earlier than usual this morning and rather than start the day with breakfast I sprayed another coat of paint on the oak board that I plan to mount to the windshield center pillar and use as a base for various cockpit accessories.  With that task completed I gathered up my cooking/eating utensils from the dishwasher and went out to my bus where I made a five cup pot of coffee and had some homemade granola for breakfast.  I then got to work on the LED lights for the hallway cove.

20141118-09586

The space in the driver side rear corner of the bus. Access is difficult and it is full of wires, relays, and the bedroom a-c evaporator and blower.

I still had trouble mounting the plastic mounting brackets due to the lack of room to work but eventually figured out that I could create enough of a hole with my center-punch to get the screw started by hand.  Because of the design of the chase I mounted two clips at each end and two in the middle.  I started from the rear end of the chase, laid the LED rope into the mounting clips closest to the wall, brought the tube around and laid it into the other set of clips and capped the end.  I inserted the two pins of the power connector/cord into the free end, turned on the power, and voilà, I once again had a functioning hallway light.  I reattached the fascia board and double checked that lights still worked.  They did, so I moved on to the next task.

The other three fluorescent ceiling cove light fixtures will be much more difficult to convert due to access limitations, but they are still working, at least for now, so I will leave them as is.  I decided to add some of the LED rope light to the lower part of the bedroom center rear closet as it does not have any lights.  (The only light is a single incandescent bulb fixture on the ceiling and the light from that is blocked by the self.  Duh.)  I mounted three clips inside the vertical stiles so as not to interfere with the door hinges.  I cut and mounted 32″ LED rope light segments, inserted the power cord pins, and mounted the rope with the power cord at the top.  An existing hole in the front corners of the shelf allowed me to pass the free end of the power cords up into the top part of the closet which has the aforementioned light fixture controlled by micro-switches on each door.  I un-mounted the existing light fixture from the ceiling and identified the +/- 12VDC lines feeding it.  I separated the two conductors on the free ends of each power cord and stripped them.  I then cut the two wires feeding the ceiling fixture and stripped the ends.  I reconnected all of the +12 wires with a wire nut and then did the same for the -12 (DC ground) wires. (This kind of work is easier to describe than it is to do, and probably takes less time.)

As long as I was working in this closet and had the access panel removed for the driver side rear corner I decided to mount the TuneTrapper FM antenna for the bedroom radio and connect it to the radio.  I mounted the antenna to the ceiling just aft of the ceiling light fixture using mounting tab cable ties.  I passed the coax through the a-c return air opening, down to the radio, and plugged it in.  I turned the radio on but only got static and squeals.  I scanned for stations but never heard one.  This radio worked the last time I used it, and did not even have an antenna connected to it, so I am not sure what has happened and will need to investigate this further tomorrow.

By the time I finished all of this it was getting dark.  I had complied a short shopping list throughout the day.  Butch needed to go to Logansport but Bill had shown up to work on Brittiny’s car so Butch felt he had to stay home.  There wasn’t much else I could do so I drove into Logansport and stopped at Home Depot, Rural King, O’Reilly’s Auto Parts, and Martin’s grocery store.  Home Depot finally had two of the 12″ x 12″ return air grills I needed for the bedroom air-conditioner return air project.

While I was in Logansport I was finally able to retrieve a voice message from Gary Hatt, the publisher of Bus Conversion Magazine, and call him back.  I also called Linda to see how her day went.  I got a call from Butch asking me to pick up an order from O’Reilly’s.  While I was there I looked at car radios but did not buy one.  The situation with the bedroom radio is that it is an old two-post automotive style.  They have not been made for years, having been replaced with the 1-DIN and 2-DIN form factor units, except for a couple of specialty companies that make “vintage style” radios for vintage vehicles.  Because that is a very specialized market the radios command correspondingly high prices.  I will modify the panel where the radio is mounted before I buy something like that.

When I got back I unloaded and stowed my groceries.  I then took one of the return air grills back to the rear closet to check the fit.  It was too big; way too big.  I measured it and it was 14″ x 14″.  Apparently the 12″ x 12″ on the label referred to the louvered area not the outside dimensions.  I will be making a trip back to the Logansport Home Depot first thing tomorrow morning.  I think they have a 10″ x 10″ grill which should measure 12″ x 12.” If that is the case it will fit perfectly.

When I got back to Twelve Mile I chatted with Butch and Bill for a while and then turned in for the night.  I got online and registered the Ridgid drill/driver I bought last Saturday.  It has a limited Lifetime Service Agreement, but only if properly registered.  I then wrote this post and went to sleep.

2014/11/20 (R) Instant-Hot (Not)

My schedule has been shifting gradually since I brought the bus to Twelve Mile, Indiana at the end of September.  In spite of it now getting dark by 6 PM I have been working on the bus later into the evening.  This is partly due to the fact that I am working on inside projects and usually have ample artificial lighting.  I did not get started checking e-mail and writing yesterday’s blog post until 11 PM and I did not turn the lights out until 2 AM.  I typically get 7 hours of sleep a night, and true to my nature, I work up at 9 AM this morning.  I had already planned to head to Home Depot in Logansport as soon as I got up, and by the time I was dressed I decided to skip breakfast and just go.

Center rear bedroom closet with LED rope lights in bottom and TuneTrapper antenna in top on ceiling.

Center rear bedroom closet with LED rope lights in bottom and TuneTrapper antenna in top on ceiling.

I returned the 12″ x 12″ return air grills (that actually measured 14″ x 14″) and bought a pair of 10″ x 10″ grills (which actually measured about 12″ x 12″).  It was 10:30 AM when I got back so I went across the street to Small Town Brew and got a cup of coffee rather than take the time to make my own pot and then have to clean it up later.  I had a nice chat with Lisa Paul (the owner) and Harold, who appeared to be an elderly farmer but I could not tell if he was “retired.”

I took the new grills inside to the parts room to see if the square pieces of 1/4″ hardware cloth I cut and painted flat black would fit inside the lip of the grills.  I had to trim about 1/4″ off of two adjacent sides on each piece.  I took everything out to the bus and got the passenger side cloth/grill installed fairly easily.  The driver’s side was another story.  First I had to drill a hole above the top edge of the grill for the TuneTrapper FM antenna coaxial cable.  The opening on this side was slightly larger than on the other side and I could not get both screws, one center top and one center bottom, to bite.  I found a piece of scrap 1×1 in the warehouse and cut a 6″ length on Butch’s chop saw.  I drilled two holes through it and used wood screws to secure it to the top of the opening.  I was then able to screw the grill in place with the hardware cloth underneath it.  I also had to work left-handed, which didn’t make the job any easier.

I vacuumed up all of the sawdust, wood splinters, and carpet fuzz from all of the cutting and drilling I had done in this area in the last few days.  The grills are white but I decided not to paint them as they are inside a closet.  I installed them with the louvers facing the rear of the closet so when the doors are open you cannot see through them into the space behind.  They look OK and, more importantly, will allow unrestricted airflow into the squirrel cage blower on the bedroom air-conditioner evaporator.

As long as I was working in the rear closet I coiled and secured the extra length of FM antenna coax.  I then located the speaker wires for the radio.  There were wires for four speakers, which I presumed were the two in the bottom of the overhead cabinet in the bedroom and the two under the wall cabinet in the bathroom.  All of the power wires were also part of that harness.  I was not able to determine why the speakers quite working, so I disconnected all of the wires from the radio, removed the knobs, retaining nuts, and faceplate, and took it out of the panel from the rear.  There are a LOT of wires behind this panel and it was not easy to get the radio out.  (The radio is mounted in a panel next to an alarm clock and under a row of pushbuttom switches.  This panel is installed under the main 240/120 VAC house electrical distribution panel, above which is the evaporator/blower portion of the bedroom air-conditioner.  That’s a lot of stuff with a lot of wires in a place that is difficult to access; another brilliant Royale Coach conversion feature.)

The evaporator is installed with the coils not centered in the opening.  In particular there is a 1″ gap along the bottom edge and a similar opening along the top edge.  The problem with this is that it provides a very direct path for air coming out of the unit to be drawn back in rather than coming from the return air grill.  I purchased two different sizes of foam weather seal at Rural King intended for sealing around the edges of a window mounted air-conditioner.  I cut appropriate lengths of this material and secured it in place using double-sided tape I got from Fonda.

I decided to mount the indoor/outdoor thermometer on the wall between the refrigerator and the house systems panel.  It only needed one small screw and a small piece of double sided tape towards the bottom to hold it to the wall.  It’s a nice location and should give a more representative temperature reading, being on an interior wall at eye level and not in direct sunlight or near the kitchen counter where the cooking gets done.  It’s also next to the refrigerator so it should have a strong signal from the outdoor remote sensor, which we keep on the middle shelf of the refrigerator compartment.  As long as I was fiddling with this, I changed the batteries on the remote sensor and the base unit.

I checked in with Butch and Fonda to see if they needed my help.  They were also working on inside projects, both bus and house, and did not need my assistance today.  If they do need my help they know where to find me and are not bashful about asking, but I still like to check in with them several times a day.

My next task was to remove the Insta-Hot water heater from the kitchen sink.  It has never worked since we got the bus, which is to say no water comes out of it when I depress the lever.  I also have no idea if the electric heating element still worked as we have had it unplugged.  I shut of the water pump and closed the primary cold water inlet valve and both the inlet and outlet valves on the new water filter.  I loosened the 3/8″ tube compression nut on the supply line and pulled it loose from the supply T.  I purchased two 3/8″ compression caps yesterday at Home Depot.  I applied Teflon tape to the threads on the T, screwed a compression cap on, and tightened it.  I re-pressurized the line, checked for leaks, and found some.  I tightened the cap more but I could not get the leaks to stop.

I again shut the pump off, closed all of the relevant valves, and opened the filtered drinking water faucet to relieve the pressure.  I borrowed Butch’s Teflon pipe thread sealant, cleaned the Teflon off the threads on the T, applied the sealant, and screwed the second cap on.  I tightened the cap and re-pressurized the system.  It leaked worse than before.  I tried to tighten the cap more and the leak got worse.  It was time for plan B.

The hose coming out of the new water filter feeds a T from which a line went to the Insta-Hot.  The other end of the T is connected via 3/8″ tube to a second T.  One line from that T supplies the drinking water faucet.  The end of the second T feeds the line for the ice-maker in the refrigerator, which we have valved off behind the fridge and unplugged.  The first T was no longer necessary and the second T wasn’t really either.  Given that I could not cap the first T successfully I decided to remove it.  That left the second T with a short length of 3/8″ tube with a compression sleeve and nut already in place.  The hose coming off the output side of the new filter housing was long enough to reach to the second T.  I snugged up the compression nut and restored pressure to the system.  No leaks!  Hurray.

My final project for today was wiring up a 120VAC outlet in the bathroom closet for the InterVac built-in vacuum cleaner.  The vacuum cleaner is installed in the hallway wall just to the left of the refrigerator and below the house systems panel.  The bathroom closet is on the opposite side of that same wall.  The closet has a false bottom with a removable panel that provides access to a 6″ deep space full of wires, hoses, and heaters.  Of particular interest to me was the Cadet electric toe-kick heater which runs on 120 VAC (~10 Amps) and is on its own circuit breaker.

I removed the access panel and then removed the thermostat knob and the front cover/grill (two screws) from the toe-kick heater.  I removed two more screws and the heater slid out the front of the toe-kick board.  I removed four small screws, took the top cover off, disconnected the power wires, and pulled them out the back of the unit.  I got a surface mount duplex outlet and a square metal junction box (with cover plate) from Butch.  I drilled a hole through the bottom of the closet next to the rear wall that was tucked under the shelves to the right.  I cut a two foot length of 14-2+g NM cable and used it to wire up the surface mount outlet.  I fed the wire down through the hole, and screwed the outlet to the rear wall.  I installed a strain relief in the back of the Cadet enclosure, cut a two foot length of 12-2+g NM cable, routed it into the Cadet, and completed the AC power connections.  I then put the top cover back on, slid the unit back into the recessed toe-kick, secured it in place, and put the cover/knob back on.  I routed the original power cable and the two new cables into the metal junction box, made all of the electrical connections, and put the cover plate back on.  I put the cover on the new outlet and plugged in the InterVac power cord, which comes out of a grommeted hole in the back wall of the closet.  I turned the circuit breaker on, turned the heater thermostat up, and it came to life.  I turned the thermostat back down to shut the unit off and turned the vacuum cleaner on.  It worked too.  I put the access panel back in place, gathered up all of my tools and supplies, and then swept up all of the construction debris.

The refrigerator has been running a bit colder than I would like so I made small adjustments throughout the day.  The unit was suddenly running at 44 degrees instead of the 35-37 degrees it had been indicating.  I removed the thermometer base unit from the wall and set it up in the refrigerator next to the remote sensor.  I will check it in the morning and see if they are in agreement.

Linda called around 8:30 PM and Butch came out to let me know.  We chatted briefly and I went back out to the coach to finish up and have a light dinner salad.  I wrapped up at 10 PM, locked up the bus, and went into the house.  Butch and Fonda had already turned in for the night.  Their oldest daughter, Gene, is getting married tomorrow in Indianapolis and they would be leaving early in the morning.

2014/11/21 (F) Wedding Bells

I set my alarm for 8 AM to make sure I was up and dressed before Butch and Fonda had to leave.  Gene, the older of their two daughters, was getting married at 4 PM today in Indianapolis and there were a few details I had to go over with Butch and Fonda before they left.  They were still getting ready so I went across the street to Small Town Brew to have a cup of coffee and chat with the proprietor, Lisa Paul.

The first of two return air grills that allow air to pass through the upper portion of the center rear closet.

The first of two return air grills that allow air to pass through the upper portion of the center rear closet. The TuneTrapper FM antenna is visible upper right.

When I returned to the house Fonda showed me how to operate their washer and dryer and the various additives she uses.  She pre-measured the food for the dogs and told me what time to feed them, when they needed to be taken outside, and the policy on “cookies” (dog biscuits).  Butch gave me a house key so I could come and go as needed.  He found some audio speakers that might be useful in diagnosing the problem with the bedroom radio.  He also found a multi-probe digital thermometer that I could use to check the temperatures of the bus refrigerator and freezer compartments and ambient room temperatures against the Indoor/Outdoor thermometer we use for that purpose.  They loaded up the car at 9:30 AM and left to pick up Bill Tharpe in Mexico (Indiana).  Bill was flying out of Indianapolis to meet a friend in Arkansas (state of) and drive her back to Indiana and the timing was such that he could catch a ride down to the airport with them.

As soon as they left I sorted my laundry into lights and darks and loaded the lights into the washing machine.  I used my own detergent, which is free of dyes and perfumes, as years ago I had a bad reaction (contact dermatitis) to a name brand liquid laundry detergent.  With the laundry started I took the digital thermometer to my bus and had breakfast.  I read the directions for the thermometer, plugged in the probes, and turned it on only to discover that the 9V battery was low (depleted) and needed to be replaced before I could use the instrument.  It was a cool but sunny day!—a nice day for a drive—so I locked up the bus, transferred the laundry from the washer to the dryer, locked the house, and headed to Walmart in Logansport.

I was back in an hour, by which time the dogs needed to be taken outside.  With that chore done I put the second load of laundry in the washer and restarted the dryer on the driest setting.  I put the new 9V battery in the digital thermometer, plugged in the three probes, and turned it on.  I put one probe in the freezer, left one buy the counter (for ambient air temp) and put one in the fridge next to the base station and the remote sensor.  The digital thermometer is accurate to 1/10th of a degree Fahrenheit.  It is a serious piece of test equipment that Butch used for professional HVAC work, so I regard the temperature readings as correct compared to our indoor/outdoor consumer unit.  For the rest of the day I kept a log of the time and temperatures each time the refrigerator compressor started and stopped.

After studying the manual for the bedroom radio, a Kenwood KRC 3004, I worked for a while on the bedroom control panel where it was mounted.  After struggling with getting the radio out yesterday I realized today that the wood bezel surrounding the panel was removable, allowing the whole panel to come out and providing easier access to its back side and the wiring behind it.  That did not change my opinion about the design of this aspect of the bus conversion; it simply was not done with the idea that it would ever have to be worked on.

I had disconnected the harness for the four speakers powered by this radio yesterday so I checked at the connector for proper resistance and shorts.  Each speaker measured around 4 ohms (DC) and none of the negative lines were shorted.  (Technically the 4 ohm rating on a speaker is an AC impedance, not a DC resistance, but the resistance reading told me there was a complete circuit from the connector through the two wires and the speaker coil.)  The power supply wires appeared to be in tact so I reconnected the radio and turned it on.  I heard some static and could “move” it from the bedroom to the bathroom with the front-rear fader control but as soon as I tried to turn the volume up the speakers went dead.

This was starting to sound like a volume control component problem so I removed the top cover of the radio.  The volume control was a component about 1/2″ square and 3″ long mounted to a vertical circuit board on the left edge of the chassis.  There wasn’t much I could do with that but tomorrow I may spray it with some De-Ox-it just for grins and giggles.

I interrupted my work around 4 PM to feed the dogs and take them outside.  I was thinking about what to work on next and remembered that the latch side stile of the left closet door in the bathroom was coming loose and was difficult to latch.  I needed two “L” brackets to reinforce the upper and lower corners on the inside of the door where the stile connected to the top and bottom rails.  For the second time today I locked the bus and the house and headed to Logansport.  This time my destination was Home Depot, but it’s adjacent to the Walmart so it was still the east end of town.  I also went to Radio Shack, in McCord’s Do It Best Hardware, looking for a replacement radio but they do not sell car radios anymore.

I called Linda while I was in town and described the work I was doing.  She sent me a TXT message with data on our refrigerator at home.  Over the course of an hour the compressor cycled 7 minutes on, 13 minutes off.  That was useful information. That’s a duty cycle of about 1/3 or 33%.  Our bus fridge duty cycle was ~60% (30 minutes ON, 20 minutes OFF).  I think our home fridge is more like what I would expect, but I will discuss this with Butch.  What bothers me the most is how long the bus fridge runs when it comes on; 4x as long as the house fridge.

By the time I got back it was dinnertime.  I heated a Tofurkey Italian sausage with some diced onion and used it as a topping for a plate of salad greens, along with some roasted peanuts and raspberry walnut vinaigrette dressing.  I then worked on the bathroom closet door while I continued to monitor and record the refrigerator and freezer temperatures.  I also repositioned the ball catches on the door so it now closes easily and latches securely.

I was watching the data from the digital thermometers and happened to be looking at the readings from the one in the freezer when the cycle ended.  The temperature was around 0 degrees F and as soon as the compressor stopped running I watched the temperature climb 1/10th of a degree every few seconds.  The compressor seemed to come back on when the freezer reached a temperature of 10-to-12 degrees F.  If I presume a 10 degree rise (to keep the math easy) and the off time is 20 minutes, the freezer is heating up 1 degree F every 2 minutes (120 seconds).  That’s 1/10th of a degree every 12 seconds, which seemed pretty fast to me.  I also noticed, however, that the temperature in the refrigerator compartment continued to drop a few tenths of a degree after the compressor stopped, so perhaps that’s where the cold from the freezer was going.

How a refrigerator cycles depends on a number of factors: the efficiency of the unit, the ambient temperature, where the controls are set, how much and what kind of stuff is in the freezer and fridge compartments, and how often the doors are opened and for how long.  I don’t have any food in the bus freezer but there is plenty of mass in the form of containers of frozen water.  I don’t have much food in the bus fridge compartment either, but I have a lot of bottled water, “milk”, O. J., salad dressings, mustard, etc. and I have it distributed from top to bottom, including the door shelves.  I have the thermometers on the second shelf from the top.

I had spent quite a bit of time earlier taking voltage measurements on the push-button switches in the bedroom control panel in an attempt to figure out why the aisle lights were not working.  I was fairly certain this was a 3-way circuit with a second switch.  I found the “other” switch by the dinette, changed its position, and voila, the aisle lights worked!  For some reason that switch, the rearmost switch by the fake plant, appeared to not be wired as a 3-way with the one in the bedroom but rather to be in series with it; both switches have to be on for the lights to work.  That may not be how they are wired, as there could be a relay involved, but that’s how they behave.

I wrapped up my work for the day at 8 PM, locked up the bus and went in the house.  I took the dogs out and then gave them each a treat.  I folded and packed my clothes and then settled in to write while I waited for Butch and Fonda to get home.  They arrived at 10 PM and we chatted for a while about the wedding/reception, refrigerators, and radios before finally turning in for the night at 11 PM.

Bus bedroom driver side rear corner house systems control panel with Kenwood KRC 3004 radio removed.

Bus bedroom driver side rear corner house systems control panel with Kenwood KRC 3004 radio removed.

2014/11/22(S) T Minus 2

…and counting.  Today was my second to last day to work on the bus in Twelve Mile, Indiana.  Except for a few days in October, the first full week of November, and some weekends, I have been at Butch and Fonda’s place since I brought the coach here on September 30.  We have gotten a lot done on both buses in that time, but not everything on either list.  As much as I wanted to avoid a last minute scramble, there was still too much to do to take the weekend off.  I was up at 7 AM, took a shower, got dressed, finished yesterday’s blog post, and got to work.  I stayed busy until 10 PM, with short breaks to have a bite to eat and one trip to Logansport late in the afternoon.

My major accomplishment today was mounting the oak board to the center windshield pillar and then mounting the magnetic compass and Pressure Pro TPMS receiver to it.  I needed a standoff to mount the inclinometer, so I cut two pieces of 1×1 and spray painted them flat black.  I will finish mounting the inclinometer tomorrow, and possibly the inside rearview mirror.

My other major project was the removal, disassembly, diagnosis, repair, testing, and reassembly of the driver’s side motorized windshield roller shade.  Fonda helped me remove it and Butch helped with the rest of the process.  It appears that the problem was a soldered connection to the internal motor that failed.  I will reinstall it tomorrow, probably with Fonda’s help, and try to correct some alignment problems in the process.

I sprayed the on/off/volume control in the Kenwood KRC-3004 radio with De-Ox-It and left it to dry.  I came back later, plugged the connector into the back of the radio, and turned it on.  Nothing, nada, zip; zero sound from the speakers.  I suspect the volume control or the final output transistors have failed.  Either way I am not likely to get it repaired.  While I tend to think of Kenwood as good equipment, both of the radios in the bus have something wrong with them.  The front radio is obviously newer as it has a 1-Din form factor.  This will also make it easier to replace when I get around to it.

The bedroom radio is an old style unit with two shafts that are used to mount it and control most of the functions plus a center section for the cassette player, LCD display, and a few buttons.  This style of radio is now considered “vintage.”  There are at least two companies that make modern radios in authentic vintage form factors, but they are very pricey and targeted at the vintage restoration market.  Putting a modern 1-Din form factor radio in the bedroom panel will require me to cut the appropriate size opening.  Since the panel has 10 switches mounted in it creating the opening will be non-trivial.  A better option would be a remote radio with a slim profile control head, like the one Butch has from Custom Autosound.  The control head would cover the center opening and I could mount switches in the two shaft holes.  I thought of that riding to Logansport.  Our trips to town are often useful that way.

Another thing I did today was continue to monitor and adjust the refrigerator.  Since I spent much of the day working in the bus I was able to log the time of day and various temperatures each time the compressor started and stopped.  I missed cycles, of course, as I was in and out of the house or gone to town, but I think I got enough data to determine if there is a consistent difference between the indoor/outdoor sensors and the more accurate Cooper Instruments SH66A digital thermometer, and if so, how much and in what direction.  I also have useful information about the settings of the refrigerator (thermostat) control and freezer (air control) for the temperatures I want to maintain in the two compartments.  I will continue to monitor tomorrow as I wrap up my last few tasks and organize the bus for travel.  I entered the raw time and temperature data into an Excel Spreadsheet but did not have time to analyze it.  Big day tomorrow; have to get to bed.

Bus bedroom DS rear corner house systems control panel removed.

Bus bedroom DS rear corner house systems control panel removed.

2014/11/23 (N) T Minus 1

Today was my final day working on buses in Twelve Mile, at least until we return here a week from today.  The temperature continued to be mild but by noon it was raining.  I had breakfast and got to work as I had a long list of little things to take care of today.

I continued to monitor the refrigerator/freezer temperatures and record them while working on other projects.  I taped a piece of cardboard to the back of the bedroom control panel to cover the holes where the radio used to be and reinstalled the panel.  I reinstalled the driver side access panel in the lower rear closet and then vacuumed up the sawdust and other construction detritus.  I started organizing the inside of the coach for travel, getting things in boxes and getting the boxes on the floor on the two front sofas.  Twelve Mile now has a large recycling container that accepts mixed recyclables, so I carried several bags of plastic, cardboard, and cans over there rather than haul them back to the house.

Automotion shade with motor removed from end of roller tube.

Automotion shade with motor removed from end of roller tube.

Steve showed up mid-morning and helped Butch install a new AM/FM radio and CD player in the MC-9.  They also came over and helped me reinstall the driver side windshield roller shade. We tested it and it worked.  I like it when that happens.  I wasn’t as lucky with my mounting arrangement for the inclinometer.  I ended up modifying one of the pieces and then had to repaint the two ends flat black.  I left it to dry and busied myself with getting the bus ready to go to Gallahan’s Truck Stop for fuel.  I had turned the electric block heater on earlier so I turned it off and turned on the Aqua-Hot engine preheat pump.

I used Butch’s portable air compressor to air up the chassis (suspension, brakes, and engine accessories) and used his auto shop compressor to adjust the inflation pressures of the tires.  I have the 12VDC accessory outlets in the cockpit powered off of the house batteries, so I immediately checked the Pressure Pro TPMS sensor readings against the known pressures in the tires.  The correspondence was as follows (actual:sensor):  DSF (116:112), PSF (116:111), DSOD (95:92), DSID (95:91), PSOD (95:91), PSID (95:91), DST (85:83), PST (85:83).  All of the sensors are reading low from 2 to 5 PSI.  I need to create a little card to go by the display unit with these calibration adjustments.

Butch had to take Steve to Rochester to meet up with his wife and I was just getting ready to lock up the buildings so I could drive the bus to Gallahan’s when Fonda returned from church.  I stowed the folding step stool in the back of the car, unplugged the electrical shoreline and stored it just inside the warehouse overhead door, disconnected the portable air-compressor and stored it in the parts room, and turned off the Aqua-Hot (anything with an open flame is a no-no at a fueling station).  I fired up the engine and was about to leave at 1 PM when Butch returned.

I drove to Gallahan’s in light rain.  The new speedometer/odometer worked as intended, and I did not get a Check Engine Light (CEL) during the trip out and back.  I discovered, however, that my transmission retarder was not engaging.  I suspect that has something to do with removing and reinserting the cable connectors on the DDEC II when I was trying to diagnose and fix the Fuel Temperature Sensor Voltage High code problem.  Not having the transmission retarder is not a good thing, but there wasn’t anything I could do about it today.  I will probably try to figure this out on Monday, December 1st while we are parked back at Butch and Fonda’s awaiting our group departure for the southwest U. S.

When I got back from Gallahan’s I pulled the bus in front of the automotive garage so I could pull the car up behind it.  A lake was forming behind the bus, so I pulled up farther.  Butch has a 30 A RV outlet on the front of the garage, which was plenty of power for the unoccupied bus.  I moved all of the stuff I had stored in the parts room to the overhead door for the woodshop, which is directly behind where I normally park the bus.  I backed the car up to the door close enough that I could open the rear hatch and load everything into the back of the car while staying out of the rain.  I packed up clothing I was not going to need and loaded that in the back as well.

Once the car was loaded I pulled it around behind the bus and hooked it up for towing.  By this time there was a hard, steady, rain but I just worked through it.  All of the lights tested as good and the bus/car combination was ready to roll tomorrow morning.  I turned on the Aqua-Hot and turned up the heat while I prepared a couple of tofu hotdogs for a late lunch / early dinner.

Magnetic compass mounted to the oak board on the center windshield pillar.

Magnetic compass mounted to the oak board on the center windshield pillar.

I re-mounted the inside rearview mirror high enough that I will not bump my head on it like I used to.  I retrieved the mounting part I had spray painted earlier and tried to finish the installation of the inclinometer, but could not get it to work.  I will either have to take the case apart to get the mounting bracket loose or I will have to rethink/re-engineer how I mount it.  That was my last project.  I would rather not have ended on a note of failure, but it meant I have at least one project to look forward to.  I gathered up a few cooking/eating utensils, my camera, and a notepad, shut off the lights, and locked the door on the way out.

Back in the house I took a hot shower and put on some dry clothes.  I loaded all of the wet/soiled clothes in the washer and Fonda did a small load of laundry for me, transferring it to the dryer as well.  The three of us chatted while they ate dinner.  Linda called at 8:30 PM and we discussed the weather forecast for tomorrow, which, while well above freezing (to start) was less than ideal with rain and high wind advisories.  I decided to try for an earlier start than I originally planned.  With any luck I can be at Martin Diesel by 9:30 AM and on the road for home by 2 PM.  That would get me back to the house while it’s still daylight.

 

2014/11/10-16 Even More Bus Work

2014/11/10 (M) New Heights

We rarely set wake up alarms anymore, one of the major perks of retirement, but ‘rarely’ does not mean never so this morning my alarm went off at 5:05 AM.  I grabbed a quick shower, got dressed, and got busy pulling everything together for the trip to Twelve Mile, Indiana.  I had hoped to be on the road by 6 AM but did not quite make it.  Linda left at 6:15 AM for a 7:30 AM medical appointment and I had the car packed by 6:30 AM and pulled out shortly after that.

The drive always takes me about five hours including stops.  Butch called me around 10 AM to let me know they were in Logansport and would not make it back to the house until mid-afternoon.  I was going to stop in Rochester anyway to buy groceries so I had lunch first and then took my time shopping.  From Rochester I took IN-25 south and stopped in Fulton to buy fuel.  The street I normally turn on is Aitken and the filling station was at the intersection with IN-25 so I headed east to Meridian Street and then south to IN-16 and finally east to Twelve Mile.

New ride height linkage (L) with ball ends.  Old linkage (R) with rubber ends.

New ride height linkage (L) with ball ends. Old linkage (R) with rubber ends.

I pulled up in front of the bus at 12:30 PM and unloaded all of the groceries and bus parts from the car and put them in the bus.  I changed into my work clothes and started working on inside projects.  First up was resetting the clocks since the switch from EDT to EST occurred while I was away.  I then emptied the cabinet above the refrigerator, which is currently used to store cleaning supplies, in preparation for installing an under cabinet florescent light fixture against the ceiling.  I was investigating the details of that little project when Butch and Fonda got home.  With the house now unlocked I finished unloading my car and moved my clothes and technology into the guest bedroom, which is where I stay when I am here working on buses.

Butch had fabricated one of my ride height linkages while I was away.  He made a second one and then I gathered up tools and my camera to install them while he finished the last one.  Fonda found a large sheet of corrugated plastic that made it much easier to slide under the bus to work.  The front one was easy to install, just as it had been easier to remove.  The rear ones were even more difficult to install than they were to remove.  I got the rear protection shields back on with Fonda’s help.  Some jobs just require more than two hands.

New ride height linkage ball end and mounting bolt.  Old linkage end visible upper right.

New ride height linkage ball end and mounting bolt. Old linkage end visible upper right.

Bill Tharpe showed up to help Butch work on Brittiny’s car.  Butch and Bill had retrieved it a couple of days ago with a car hauler trailer when it quit running.  It was leaking coolant and apparently needed a new intake manifold gasket.  Bill spent most of his time disassembling the top of the engine so he can eventually remove the manifold.

Although I bought fresh salad greens on the drive down it ended up being a long day so I prepared a Simply Asia Mushroom Noodle Soup Bowl for dinner along with a few grapes.  Linda called at 8:30 PM and we chatted about her audiology and ENT appointments this morning.  The audiologist said her hearing in her ‘good’ ear was essentially unchanged from four years ago, which was good news, and she had a great visit with Dr. Siedman.  I chatted briefly with Butch about the fair weather ‘to do’ list for tomorrow and then we all turned in for the evening.

2014/11/11 (T) Code 23

I was up at 7 AM and in my coach by 7:30 having a simple, but yummy, breakfast of orange juice and homemade granola with unsweetened soy milk.  With all of the projects I have going on I have very little space at the moment to prepare food or sit and eat so I decided to forego making coffee and walked across the street to Small Town Brew to get some.  Lisa (the shop owner) was there so we had a nice chat.

New ride height linkage installed on front axle and leveling valve.

New ride height linkage installed on front axle and leveling valve.

The weather forecast indicated that the best part of the day was going to be the morning with the high temperature of 54 degrees F at noon and then falling steadily with a rapidly increasing chance of rain.  I had two outside tasks to accomplish on my bus today so I wanted to get them done in the morning if possible.  My first task, however, was to attach the stinger (or whip, the long slender flexible piece at the top of an amateur radio antenna) to the base screwdriver portion of Butch’s mobile HF ham antenna.  I was able to do this from his ladder and did not have to get up on the roof.

While I worked on the antenna Butch prepped their new motion-sensing patio light.  He installed it over the entrance door to their bus with Fonda’s help.  With his assistance I removed the new fan belt from my engine, removed the two old air-conditioning compressor belts, and installed the two new a-c belts.  It was obvious from the extra slack in the inside belt that the a-c compressor was out of alignment with the pulley on the engine.  Butch suggested that we take the new belts off rather than ruin them and put the old ones back on until we can align the compressor.  That made sense to me, so that’s what we did, finally putting the new fan belt back on.

The drive side rear ride height linkage was not easy to get to with the dual drive tires on the axle.

The drive side rear ride height linkage was not easy to get to with the dual drive tires on the axle.

In the process of changing the belts I tried to us the valve that either tightens the belts when the engine is running or retracts the belt tensioners when they need to be changed.  The retract position did not appear to work and after looking at how the valve was plumbed Butch and I were of the opinion that it may not be connected correctly.  The run/tighten position works as intended, extending the air-driven belt tensioners, but it would sure be nice to be able to turn the valve and have the belt tensioners retract as intended.  I’m going to have to find out more about this valve and re-plumb it if necessary.

Butch and Fonda had to take some time to move things out of their warehouse for someone who is coming by to purchase them.  While they did that I started working on the DDEC II code 23 (Fuel Temp Sensor Voltage High) problem.  I got the diagnostic procedure from Chuck over the weekend.  The first step was to remove the harness from the sensor, short out the two pins, turn on the ignition (but do not start the engine), and see what Active Codes the ECM (DDEC II) generates.  That sounded simple enough but unfortunately the Fuel Temperature Sensor is located on the right side of the fuel pump under the ECM and behind a coolant pipe.  The only way to get to it is to unbolt the ECM mounting plate from the block and lift it up, which it turn requires all of the harnesses to be unplugged from the ECM.  Again, simple enough in concept but more difficult in practice.  Once I could get to the sensor and disconnect the harness I had to figure out a way to jumper across the two sockets.  I ended up using two pieces of small solid wire inserted into the connector and then bent to give me something to connect the alligator clips to.  Fonda helped with all of this.  Again, it was more than a two-handed job.

Access to the passenger side rear ride height linkage was a little better, but not great.

Access to the passenger side rear ride height linkage was a little better, but not great.

I turned on the ignition and read the Active Codes on my ProLink and also had them flash on the Check Engine Light.  I was looking for a code 25 (everything is OK) or either a code 23 or a code 24.  What I got was both a code 23 (sensor signal and/or return wire open) and a code 24 (signal wire shorted to +5 VDC wire).  The diagnostic procedure has you check resistance between pins in either case, just different pins, so I checked both.  The readings I got did not make a lot of sense and I did not have time to pursue it further as the temperature had started dropping and it had started misting.  (I figured out later that the code 23 test requires the jumper to remain in place but I had done the code 24 test first, which required it to be removed, and not reinstalled it, so I did not do the Code 23 test correctly.)

By the time I got the ECM bolted back in place and all of the harnesses reconnected it was raining lightly and my tools were getting wet.  I got all of them put away and closed up all of the bays and decided to start the engine to make sure it would still run.  It started right up and I let it run on high idle for 25 minutes while I had a bite of lunch.  The test procedure called for clearing all codes before starting the engine and monitoring the CEL for 8 minutes, stopping the engine, and checking the historical codes.  I was clearly done working outside for the day so I did not get to do this at this time.

It was only mid-afternoon when I shut the engine off so I set to work installing the florescent light fixture in the cabinet above the refrigerator.  As with most projects this one seemed simple enough but took quite a while to do.  I was able to use an existing hole with wires running through it to snake two more wires through from the cabinet (where the fixture was going) to the adjacent cabinet to the right over the left corner of the kitchen counter.  That cabinet already had two 12 VDC light fixtures and I had previously identified the positive and negative supply wires.  What complicated matters was that the glue holding the carpet on the ceiling of the refrigerator cabinet had failed and the carpet was falling down.  The loose carpet also led to the discovery of other 12 VDC wiring hidden underneath it.  That, in turn, led to two things:  1) I had to make sure that when I mounted the new florescent fixture I did not screw through any of these wires, and 2) I had to figure out a way to keep the ceiling carpet up.

The sunset was amazing on November 10th.

The sunset was amazing on November 10th.

I taped the existing wires to the plywood ceiling so they would be in known locations.  I then used wood screws and fender washers to hold the carpet to the ceiling.  I added insulated spade lug connectors to the fixture wires and the supply wires and connected the other ends of the supply wires to the existing supply wires using special connectors designed for tapping into an existing wire without cutting it.  I would not use these for higher current applications but for a small florescent light fixture they are fine.  I attached the fixture to the ceiling with four short wood screws, installed the F13T5 bulb, turned the switch ON, and there was light!  I love it when that happens.

As long as I was working in this area I decided to reattach the incandescent fixture in the cabinet above the kitchen sink.  It was designed to be mounted with two screws but only one was in place.  Again, this turned out to be more work than it at first appeared.  The fixture is mounted to the inside of the upper cabinet face frame, not the ceiling, so there was no way to directly see what I was doing.  That meant mirrors and flashlights, and a blown fuse when my screwdriver shorted +12vdc to DC ground.  It turned out that the wiring was interfering with the mounting.  I eventually got it tucked up under the ceiling carpet and got the fixture mounted using two screws.  My documentation indicated that the upper kitchen cabinet lights were powered by wire #51.  I located that wire in the front DC distribution panel and pulled the 10 Amp fuse that protects it.  It was indeed open, which was good as it meant my documentation was correct and allowed me to find it on the first try.

The florescent light in the hallway ceiling cove quit working the last time I was here.  I removed the bulb, with some difficulty, to see what it was.  It was an F72T12 55 Watt (72″ length) with a single pin on each end.  I needed a 10 A blade fuse to replace the one I blew so I made a shopping list and headed off to Logansport to visit Walmart, O’Reilly’s Auto Parts, and Home Depot.  Since I was in town I called Linda as my cell phone does not work in Twelve Mile.  She wanted to know if I had shut off the outside water at home.  I had not, so she took photos of the valves/pipes in the utility room and e-mailed them to me.  I got a call from Butch while I was in town.  He needed a few machine screws so I picked those up.  When I got back to the house I checked the photos Linda had sent and then sent her a couple of replies which resulted in her calling the house to go through what had to be done.  She e-smiled me later that she had taken care of it.

I Replaced the F72T12 (with considerable difficulty) but it still did not work.  It was late, and dark, and I was tired, so finding and fixing the problem would have to wait until tomorrow.  Somewhere in there I had a tofu Italian sausage on a whole wheat hotdog bun with mustard and onions.  By the time I came in to the house Butch and Fonda had gone to bed.  I checked e-mail and logged in to RVillage ad saw that our “Vegan RVers (WFPB)” group was up to 100 members.  I worked on this post and then went nighty night.

2014/11/12 (W) Burrrr

The leading edge (cold front) of the polar vortex had passed through north central Indiana by the time we got up this morning.  There was a definite bite to the air, and it will get worse before it gets better, but I brought a selection of winter clothing that I can layer in various was to suit the conditions and the work that needs to be done.  All of my projects today were inside the bus or the house so I did not have to bundle up excessively.  Butch and Fonda spent a little time working on the privacy curtain system for the front of their coach but much of their time today was taken up with someone who bought a lot of metal shelving and storage racks from them.  He showed up sometime between 9 and 10 AM and brought a crew to disassemble the shelving and load everything into a trailer.  Butch had to use his forklift to help load some it.

The DDEC II ECM on our DD8V92TA with all of the harnesses unplugged.

The DDEC II ECM on our DD8V92TA with all of the harnesses unplugged.

I had cleared some space in the kitchen (of the bus) so I made coffee to go with breakfast.  That emptied out the last of three storage canisters, so I opened the three bags of custom roasted beans from Teeko’s and transferred them to the three containers.  After considering my project choices I decided to install the knob on the front TV cabinet door.  I spent a few minutes checking the installation details and dimensions of the Gaggenau halogen cooktop, which we would eventually like to replace with a built-in two-position induction cooktop if we can find one that fits the existing opening in the kitchen counter.  I had a note to get the GenSet model number for Martin Diesel so I looked that up in my documentation and found both the model and serial numbers.  I then turned my attention to the fluorescent light fixture in the hallway cove.

After studying the construction of the cove I realized that the front piece could be detached by removing seven (7) screws from underneath.  With the fascia removed I had great access to the F72T12 bulb.  I also discovered that there wasn’t an actual fixture there, just two ends to hold the bulb.  One was spring loaded and the other one was not.  The ballast was obviously somewhere else.  But where?

I vaguely recalled having seen a small metal box with wires coming out of it in the space under the bottom shelf of the pantry so I looked there and, sure enough, there it was.  It still had a label on it that was in good condition and indicated that it was a 13.2 VDC ballast for a single F72T12 fluorescent bulb.  Things were slowly starting to make sense.  There is an identical box in the back TV cabinet, with the same wires and connector but no label or markings, so I reasoned that it must power the fluorescent cove light in the bedroom.  That meant there were probably two more boxes somewhere for the two front fluorescent cove lights, although there might only be one as they are on the same switch.  Again, I vaguely recalled having seen these boxes in the bottom rear of the A-V cabinet behind the driver’s seat, so that’s where I looked first, and there they were.

Wire taps for joining a new wire to an existing wire.

Wire taps for joining a new wire to an existing wire.

It appeared that we had a bad ballast and that this would be an easy fix.  The label said the ballast was a Triad made by Magnetek in Huntington, Indiana and had the model number.  Cool.  I could drive over there and get one if I had to.  I went inside to use my iPad to search for sources of supply and found that Magnetek had divested itself of most of their product lines, including this one.  Their website gave the URLs of the various companies that acquired their product lines.  Universal Lighting picked up the DC ballast products so I tried their website but did not find one for an F72T12 bulb.  Ugh.  I searched some more and eventually found a Bodine (Philips) ballast electronic/inverter ballast that appeared to be exactly what I needed…for $98 plus tax and S$H.  Double ugh.

I would eventually like to convert most of the lighting in the coach to LEDs, so perhaps this was the time.  I found a kit with 52.5 feet of LED rope light (~10 LEDs/in) and power cords, end caps, and mounting clips to make up to 10 segments.  The description said the light pattern was 360 degrees and the illumination was 48-60 lumens per foot.  An FTC website indicated that a typical 40 W incandescent bulb puts out about 450 lumens and a 60 W bulb about 800 lumens.  Figuring conservatively at 50 lumens per foot a 10 foot length, folded back mid-point to make a five foot long light source, should give us at least 500 lumens which is plenty of light for this application.  The kit has enough materials to make four such lights and still have 12 feet to use somewhere else, such as around the inside of the face frame of the wardrobe closet in the bathroom.  I ordered it with 3-day shipping.  While I was at it I ordered an Everpure (SHURflo) ADC Full-timer bacteriostatic water filter cartridge with 2-day delivery through Amazon Prime.  I thought about ordering several, but figured I might find them cheaper in Quartzsite this winter.

There wasn’t anything else I could do on the fluorescent fixture so I decided to shorten the cable for the front OTA TV antenna and put an F-connector on the RF coax portion.  I borrowed Butches crimper with the hex jaws and opened the coax cable stripper I bought at Home Depot.  I then discovered that the RG-6 connectors I had did not fit the cable, which was smaller in diameter.  Without different connectors this would be another stalled project with my front TV unusable.  Butch told me there was a Radio Shack store inside McCord’s Hardware and Lumber so I made a shopping list and headed to Logansport.

New florescent light in cabinet above the refrigerator.

New florescent light in cabinet above the refrigerator.

Based on the connectors available at Radio Shack I determined that my cable was probably RG-59 so I got four crimp style F-connectors.  While I was in town I stopped at Home Depot for a GFCI outlet to replace the one in the bathroom, which keeps tripping.  I also spotted some packages of cover plate screws so I got one each of white, almond, and brown.  A quick stop at Walmart for some personal items and I was headed back to Twelve Mile.

When I got back Fonda was just starting to make their dinner so I went to my coach to fix a salad.  I had a large salad of power greens, fresh mushrooms, fresh strawberries, onion, peanuts, and dried cranberries with a raspberry walnut vinaigrette dressing and a small glass of Moscato wine.  I then worked on the F-connector.

It took a while, and a couple of test fits, but I eventually figured out how to strip the coax, folding back the braided shield while leaving the foil shield in place, and get the prepped cable fully inserted into the connector and crimped it.  I stripped the three control wires, secured the little bit of extra cable inside the cabinet, and then connected the coax and control wires to the back of the controller.  Twelve Mile is a long way from everywhere but I figured I would I would test my cable construction by trying to tune in a channel.  The TV was having trouble receiving channel, 16-1 HD until I moved the antenna from position 8 to position 6.  Position 8 is just to the driver side of the nose, so given how I was parked it was facing slightly east of south.  Position 6 was more ESE, and the signal was good except when a truck went by.

Tarheel HF screwdriver ham radio antenna on motorized lift mount.

Tarheel HF screwdriver ham radio antenna on motorized lift mount.

I checked with Butch and WNDU 16-1 HD turned out to be a South Bend station.  South bend is north and slightly west of Twelve Mile.  Hummm?  I swung the antenna around to position 14, 180 degrees from position 6 and roughly NW, and had an excellent signal there too (I don’t recall it being interrupted by passing vehicles).  Clearly the F-connector was on well enough to transmit a clean signal.  The only thing I can figure is that my antenna had an unobstructed view of a large house in direction 6 that provided a very usable signal that was blocked by large trucks passing by.  Either way, South Bend is over 60 miles away, so propagation must have been very good this evening.

That was enough for one day.  I gathered up my dirty dishes and camera and returned to the house.  Fonda was just loading the dishwasher so I added mine.  I chatted a while with Butch about the DDEC II code 23 diagnostic procedure and the game plan for tomorrow and then turned in to check e-mail and work on this post.

2014/11/13 (R) Thermal Underwear

I slept in this morning so I skipped making coffee and after my usual breakfast went across the street to Small Town Brew to get some.  I then got to work on one of Butch’s projects.  We kept busy today including, in spite of the cold, some outside work.  Thermal underwear helped keep me comfortable.  I went back to STB and got a second cup of coffee around 10:30 AM.

I spent the morning helping Butch and Fonda with the wire chases for the bedroom in their bus.  Each chase is a pair of boards joined at a right angle to make a horizontal bottom and a vertical side.  They will each be mounted using a pair of aluminum angles, one on the wall for the bottom and one on the ceiling for the brackets for side.  My first task was to drill holes in the aluminum angles approximately every 12 inches.  I then helped position them, drill the holes for the mounting screws, and attach them to the bus.

Testing the DD8V92 fuel temperature sensor.

Testing the DD8V92 fuel temperature sensor.

Fonda and I moved three large wooden tables from the warehouse to the now mostly empty ‘parts room.’  All three of us moved a couple of loaded metal shelving units and then Fonda and I put the wooden tables in place.  I plan to move my all of the stuff I have in the (unheated) warehouse to the (heated) parts room tomorrow.

I worked on some minor projects in my bus and had a tofu turkey sandwich with vegan mayonnaise, lettuce, and onions.  I disconnected/removed the ballast for the bedroom fluorescent cove light and used it to test the hallway fixture.  The light worked just fine which verified that it was a ballast problem and not a wiring problem.  I needed to know that before I went to the trouble of converting this fixture to LED rope lighting early next week.  I put the good ballast back in rear TV cabinet and kept working in there, starting with the installation of the knob for the TV cabinet door.

I shortened the control/coax cable for the TV and installed the crimp-style F-connector.  Unlike the front TV (which was on and receiving WNDU Ch-16 from South Bend over 60 miles away) the rear TV was not able to detect any signals at any antenna direction.  The OTA antenna for the rear TV is in the rear roof tray and the bus is backed into its parking spot, so it is more shielded from radio frequency waves than the front antenna.  The only direction that might be good is straight ahead, which is due south.  Unfortunately there are no TV towers in the direction for a long way.

Magnatek 13.2 VDC ballast for F72T12.

Magnatek 13.2 VDC ballast for F72T12.

Butch decided to install the plate heat exchanger in the bay just forward of where the Oasis Combi is installed and needed my assistance.  The plate heat exchanger will be used to tie the Combi to the OTR bus heating system (engine coolant loop).  We also discussed possible locations for the coolant circulating pump that he plans to plumb into the OTR heating lines once he determines which line is the supply and which one is the return.

I returned to my rear TV closet projects while Butch started compiling a shopping list.  After stabilizing the back piece of plywood inside the cabinet with a couple of screws I mounted the Pressure Pro Repeater to it using a couple of self-adhesive Velcro pads that came with it.  I then mounted the dual 12 VDC outlet directly below the ballast and installed a small cube relay just behind it using its built in mounting tab.  Tomorrow I plan to connect the outlets to the relay and supply it with 12 VDC to power the repeater.  I also plan to figure out a way to drive the relay from a 12 VDC source that comes on when the 12 VDC chassis battery switch is ‘ON.”  For now, though, I will connect the outlets to the NC (normally closed) contacts so that power will flow to the outlets when the relay coil is not energized.

I was pondering my next project when Fonda let me know that Butch would be ready to head to town shortly.  I was considering how I was going to enlarge the two small openings that allow air to flow from the grate in the rear TV cabinet through the upper parts of the center cabinet and into the driver side corner cabinet where the rear air-conditioner evaporator and blower are located.  At Butch’s suggestion I looked up the specifications on the Carrier air-conditioning units; 14,000 BTUs and 465 CFM air flow.  Requirements for supply and return grates?  At least equal to the square area of the evaporator coils.  The coils are roughly 9″ x 12″, as are most of the grates.  The two small openings in the side walls of the upper closet, however, are 3″ x 10″, not nearly big enough.  This is what happens when buses are converted to “look nice” instead of to “work correctly.”

Passenger side rear corner TV cabinet with ballast, dual 12V outlet, relay, AC outlets, and PressurePro TPMS repeater.

Passenger side rear corner TV cabinet with ballast, dual 12V outlet, relay, AC outlets, and PressurePro TPMS repeater.

I rode into Logansport with Butch where we stopped at O’Reilly’s Auto Parts, Aldi’s market, and Home Depot.  We ran into Bill Tharpe at O’Reilly’s and saw his car again at Home Depot.  When we got back Fonda was putting the finishing touches on their dinner so I made a salad and selected a can of Amy’s split pea soup and a can of Mandarin oranges.  I returned to my coach, cleaned up the kitchen area, and locked up for the night.  I spent a few minutes studying Butch’s MC-9 manual and finally found the diagram that identified the engine coolant supply and return lines.  That was a nice way to end the day so I retired to my room to work on this post and transfer photos from the last few days to my computer.

2014/11/14 (F) Arctic Oasis Grandma

I bought a dried fruit stolen last night at Aldi’s and had a few slices for breakfast this morning.  No animal products, of course, but a few less-than-desirable ingredients like HFCS.  Still, it was very tasty and not something Linda would be likely to buy at home.  I brewed a pot of coffee with a mix of the Cafe Europe Blend and Columbian Decaf beans from Teeko’s.  I had some with the stolen and drank the rest over the course of the morning.

Stacked plate heat exchanger to left of Magnum 4024 inverter/charger.

Stacked plate heat exchanger to left of Magnum 4024 inverter/charger.

Most of our work today was focused on trying to finish the installation of the ITR Oasis Combi in Butch and Fonda’s MCI MC-9 bus conversion, and much of that work was outdoors.  The temperature was around 20 degrees F when we got up this morning and never broke the freezing mark.  It was sunny most of the day, however, without any wind and I was dressed for the conditions so I was generally comfortable in spite of the Arctic air mass sitting on top of us.

My first task was to mount the Zone Controller to the face of the ceiling tunnel above the Combi.  I then completed the cable connections and dressed the cables.  We then pulled the #10 2+g cable from the old Aqua-Hot bay to the Combi and I completed the connections for the 120 VAC electric heating element.  We pulled two lengths of two-conductor low voltage cable from the bedroom closet to the fresh water pump, which is mounted on a vertical plywood plate on the rear wall of the bay next to the Combi.  One cable brought +/– 12 VDC down from the 12 VDC distribution panel in the closet where the negative (DC ground) was connected to the pump.  The other cable was used to route the +12 VDC back to a switch in the closet and then return it to the bay where I connected it to the pump.  With this arrangement Butch has DC + and – in the bay and can add a switch later (or use a jumper) to turn the pump on from there.  Although a bit unusual there is nothing fundamentally wrong with wiring switches in parallel; it just means that ALL switches must be off for the device to be off.

While I was working on the wiring in the Combi bay, Butch and Fonda pulled a pair of #4 welding cables from the battery compartment to the bedroom closet to provide + and – 12 VDC to the low voltage distribution panel.  He and I then pulled the remote panel cable for the Combi from the bay up into the bedroom closet.  He took care of the connections at the remote panel while I took care of the ones in the bay.

Oasis Combi Zone Controller (top).

Oasis Combi Zone Controller (top).

With the Combi wiring done I took a few minutes to move all of the parts and supplies I had stored in their (unheated) warehouse into their (heated) parts room where Fonda had cleared some shelves for me.  By the time I was done Butch was ready to move to the next part of the Combi installation; running the coolant lines.  He discovered that his insulated heater hose would not fit over the fittings on the ends of the fan-coil heat exchangers but might fit if he cut off the enlarged swaged ends.  It turned out that the insulated hose still would not fit so he made a quick run to town for regular heater hose. Sometimes bus projects are just like that and you have to figure out how to make things fit and work.

While Butch was gone I spent some time working in the back TV cabinet of my coach.  I tapped into the +/– 12 VDC wires that supply power to the fluorescent light fixture to provide power to the dual 12 VDC outlets and relay I installed yesterday.  The DC negative went directly to the outlets and the DC positive went to the common terminal on the relay.  I connected the positive lead from the outlets to the NC (normally closed) contact on the relay.  All of the relay connections were made with insulated spade connectors.

When I can get a +/– 12 VDC chassis battery cable to the cabinet I will use it to control the relay and move the outlet positive connection to the NO (normally open) terminal.  With this arrangement, the power for the PressurePro Repeater will come from the house batteries (which are rarely switched off) but the unit will only be on when the chassis batteries are on.  For now, however, we will simply have to remember to plug the repeater in when we are going to drive the bus.

That's our bus!

That’s our bus!

As soon as Butch returned all three of us got busy working on the coolant lines.  First Fonda and I pulled the insulated lines out.  Butch then fed a standard line from the front heat exchanger through the floor to the front driver side bay.  Fonda and I then fed it through the access holes to the rear driver side bay and through the floor to Butch by the rear heat exchanger.  Butch connected the hose to rear heat exchanger.  He then pulled the line back up by the front heat exchanger as we removed most of the slack in the bays and connected it to the front exchanger.  Fonda and I fed a piece of hose along the back wall of Combi bay and up into the bedroom closet where Butch connected it to the rear heat exchanger.  I then routed the hose and Butch connected it to the Combi.  Butch fed a second hose from the front exchanger through the floor and we routed that one to the stacked plate heat exchanger one bay forward of the Oasis Combi.  He connected the hose to the front exchanger and I then climbed into the bay, routed the hose with Fonda’s help, and connected it to the heat exchanger.  Butch fed another piece of hose from the Combi bay to the bay where I was working.  I attached that hose to the heat exchanger and then Butch pulled out the slack and connected it to the Combi.  At that point we had a complete, closed loop with the three heat exchangers in series.  I think that was about when the UPS truck arrived with my SHURflo Everpure ADC water filter cartridge for under the kitchen sink.

It was time to make it work; sort of.  Butch had not tied the diesel fuel lines in yet, and the fresh water connections were also not done, but that did not matter.  The next step was to fill the coolant loop with coolant (anti-freeze) and purge it of air.  We thought we had to have at least one of the thermostat circuits active, and thought they worked by grounding the wire coming out of the Zone Controller, but figured out later that we had it backwards.  No harm done, just no good either.  Butch put the 3-way “Summer/Winter” valve in what he thought was the Summer position, which just connects the output (supply) port to the input (return) port, and turned the Bypass switch on the Zone Controller ON, activating the built-in coolant circulation pump.  The Combi was already full of coolant and in this configuration should have just circulated it internally.  Butch was watching the radiator cap and had additional coolant ready to add if any air got purged.  We could hear the pump running, but he could not see any fluid motion in the radiator fill tube.  Hmmm, yet another bus conversion mystery.

Close up of the dual 12VDC outlet and control relay in the passenger side rear corner cabinet.

Close up of the dual 12VDC outlet and control relay in the passenger side rear corner cabinet.

Butch turned the valve to the Winter position which is supposed to allow coolant to flow through the external loop.  This should have caused a drop in the reservoir level, requiring additional coolant, as the coolant was transferred to the coolant lines, but again, there was no flow.  The two heat exchangers in the house (living room / kitchen and bedroom / bathroom) have bleeder valves to help rid the system of air.  I opened the valve on the rear (bedroom) heat exchanger but that did not help.  Butch decided to call ITR for technical support.  He talked through the details of the installation but they did not have any definitive advice.

All indications were pointing towards some sort of blockage internal to the Combi and Butch thought it might be ice.  Kevin, in Washington passed Butch to Marcello at the factory in Canada, but still no luck.  We decided to turn on the electric heating element and set up a small electric space heater to warm up the bay and the unit while we went to dinner.  We drove to The Old Mill west of town on SR-16 where I ordered a mushroom, onion, jalapeño pizza, light sauce, no cheese, and extra thin crust.  It turned out quite well.  When we got back to the house we gave the Combi another try and it looked like it was going to work, but then didn’t.  At that point we called it quits for the night.  Linda called around 9 PM and we chatted briefly, catching up on the events of the day.  Grand-daughter Madeline finally called her “grandma” for the first time, so she was very excited about that, and it was good note on which to end another long, productive day.

2014/11/15 (S) Houston, We Have Ignition

I was up a little before 8 AM, had some more of the stolen I bought at Aldi’s for breakfast, and made about five cups of Teeko’s Seattle Blend coffee.  Butch and I then got back to work on the Oasis Combi hydronic heating system.

Butch was up earlier than me and drove into Logansport before I got up.  When he got back his first task was to remove the supply and return lines (heater hoses) so he could install shutoff valves.  It turned out that he had the wrong parts and had to go back to Logansport so I rode in with him.  When we got back we finally got to work.  It was chilly but we had another mostly sunny day on tap with light-to-no wind, so working outside was not unpleasant.

Fresh water pump on isolated plywood panel behind Oasis Combi.

Fresh water pump on isolated plywood panel behind Oasis Combi.

Butch got the valves installed and the lines reattached.  He then plumbed in the two fuel lines (supply and return).  Before he turned the unit on I pointed out what I had discovered in the manual last night; that the position of the “summer/winter” loop 3-way valve was the opposite of what we thought it was.  With the valve in the “winter” position, which would allow coolant to flow through the loop with the heat exchangers, he turned on the bypass switch on the Zone Control Board.  The circulation pump came on and the coolant level immediately started to drop in the filler neck, which meant the coolant was being moved into the loop and whatever had blocked this from happening yesterday had cleared up.  He turned the pump off so we could stage one gallon jugs of antifreeze/water mixture to finish filling the system.

Butch suspects there was an ice plug in the domestic hot water heat exchanger which is internal to the Combi box and the first place hot coolant goes before it leaves the unit and travels through the coach.  We also suspect that the use of the 1500 Watt electric heating element last night melted the ice plug.  At least that’s our best guess as to what the problem was.  The reason we thought this was the cause is that the factory apparently tests the units with water and it is probably impossible to get it all out using compressed air.  That is certainly the case with an Aqua-Hot.

Butch prepared six gallons of antifreeze/water mixture and staged them by the Combi.  With a funnel in the filler neck he turned the bypass switch on again and started adding the coolant mixture as the pump pushed it through the system.  Once the system seemed to be full I went into the house portion of the bus and barely opened the bleeder valve on the bedroom heat exchanger.  I got a three second puff of air and then coolant started to appear so I closed the valve.  I repeated this with the bleeder valve on the front heat exchanger with the same result.  These two valves are the highest points in the loop, so air tends to collect there.  The system essentially had no air in it at this point.

fan-coil heat exchanger

fan-coil heat exchanger

Butch hooked up the two fuel lines (supply and return), turned the power on to the unit, and then turned the burner on using the switch by the bedroom utility closet.  We could hear the pump trying to prime but the burner would not ignite.  The unit “flamed out” and Butch reset it several times to no avail so he turned the burner switch off.  We studied the situation and Butch realized that he had reversed the fuel lines.  He switched them and turned the unit back on.  It fully primed on the second try and ignited!  Finally, we had ignition.

Butch rigged up temporary power to the fans on the two heat exchangers and let them run.  The coach eventually got too warm to work and we had to turn the fans off.  We spent the rest of the day, with help from Fonda, completing other aspects of the system installation.  I removed an old mechanical thermostat from the warehouse and Fonda cleaned up an identical one.  We had a third one (different make) that did not need any work.

We pulled three two-conductor thermostat cables from the Combi across the bay and up through a hole in the floor of the bedroom utility closet and then to the three thermostat locations.  We used colored electrical tape to tag the ends of each cable as we pulled it so we could keep them straight later; yellow for the living area, blue for the bathroom, and red for the bedroom.  I mounted one of the thermostats in the kitchen by the front living area, the second one by the bedroom, and the third one in the bathroom.  I completed the connections in a somewhat unusual way.  The cable had a red wire and a white wire.  The white wire was left intact and provided a path from the thermostat to the Combi for DC negative (ground).  The red wire was cut in the utility closet and used to provide +12VDC to the thermostat.  The red wire in the cable from the closet to the Combi was not used.

The Combi came with pigtail harnesses that plug into keyed sockets on the Zone Control Board (box) and have butt splice connectors already installed on the loose ends of the wires.  I completed the thermostat wiring by connecting the wire for the front thermostat to Zone 1, the bathroom thermostat to Zone 2, and the bedroom thermostat to Zone 3.  Butch had connected a wire to the Zone 4 connector yesterday and planned to leave it and connect it to a switch in the bay for test purposes.

With the thermostats wired in Butch worked on the fan control relays while Fonda and I pulled a four-conductor thermostat cable from the Combi across the bay, up through the floor into the utility closet, and all the way up the center isle of the bus to the dashboard.  When then took the cable back into the bedroom and pulled it from the utility closet through the driver-side chase to the cabinet at the front end of the kitchen counter and then down through the cabinet to the very bottom and out the front facing grill to the front heat exchanger.  We left plenty of cable for hooking up the fan control relay that Butch had mounted on the fan-coil heat exchanger and left an extra coil of cable in the utility closet so I would have enough wire to make connections to the relays for the fans on the rear heat exchanger.

As with the thermostat wiring, I left the green and white wires intact all the way from the front heat exchanger to the Combi.  In the utility closet I removed the jacket from a six inch section and cut the red and blue wires.  The red wire coming up from the Combi was connected to the relay for the bedroom fan and the blue wire coming up from the Combi was connected to the relay for the bathroom fan, both of which draw air through a common radiator.  These colors matched the colors of electrical tape used to identify the corresponding thermostat cables.  I connected a separate white wire from the DC negative terminal on each relay to the DC negative (ground) bar on the 12 VDC distribution panel at the top of the utility closet.  The red and blue wires from the closet to the front heat exchanger were not used.

Adding coolant to the ITR Oasis Combi.

Adding coolant to the ITR Oasis Combi.

I mounted the relays to the outside wall of the closet; bedroom relay to the rear, bathroom relay to the front.  I do things like that when I work on projects like this.  By this time it was dark and Butch had gone inside not feeling completely well.  He was really stressed out yesterday when we were unable to fill the coolant loop and purge it of air and he did not get a good night’s sleep.  Been there, done that, didn’t even get the T-shirt.

It was going on 6 PM and I was done working for the day, the first day since I have been working here that I had finished up that early and the first day that I had not worked on any of my own bus projects.  But that was OK;  Butch and Fonda’s ability to use their bus conversion during the winter with comfort and convenience was directly related to the successful completion of the Oasis Combi installation and it felt good to have it so close to bring done.  I will finish up the little bit that remains to do tomorrow and then install another 120 VAC circuit from the inverter circuit breaker panel to outlets for the bedroom.

I need to mention that Butch has been very pleased with the treatment and communication from International Thermal Research, the manufacturer of the Oasis product line.  He was on the phone with their U.S. sales office yesterday when we ran into difficulty and they transferred him to someone at the factory in British Columbia.  The factory contact sent Butch an e-mail, which gave him an address to reply to, and his personal cell phone number.

Sometime in the late afternoon Bill Tharpe showed up to continue working on Brittiny’s car.  It needs a new intake manifold gasket, which requires the disassembly of the top half of the engine.  Bill really knows his way around cars having worked with Indy and Formula (One?) race car teams over the years.  Around 7 PM we headed into Logansport to have dinner at Pizza Hut.  I had the salad bar and some decent (smooth, mild) decaffeinated coffee.  When we got back to their house Bill got back to work on the engine and I retired to my room for the evening.  Butch and I talked earlier about possibly driving over to the Ft. Wayne Hamvention tomorrow but decided to stay here and continue working on bus projects.

2014/11/16 (N) Death of a Mouse

I was up around 8 AM and had my usual breakfast of homemade granola, some orange juice, and coffee (Teeko’s Seattle Blend).  I still had some of the stolen left, but having had that the last two mornings I felt the need to return to my normal routine.  Right after breakfast I replaced the GFCI outlet in the bathroom.  The old one had tripped a couple of times for no apparent reason and that was just one more thing I did not want to live with.  The old one was feeding two load circuits and had short pigtail wires wire-nutted to the hot and neutral conducts.  GFCI outlets are much bulkier than normal ones so that made for a very crowded box.  The new one had back connectors that allowed two wires to be inserted straight in under one screw and tightened.  That allowed me to do away with the two pigtails and the two wire nuts and make it a bit easier to get the outlet into the box.

By the time I finished installing the GFCI outlet Butch was ready for my assistance.  He finished connecting the fan relays on the front heat exchanger and I finished connecting the fan relays on the rear heat exchanger.   I then tied in the fan relay lines to the appropriate fan control lines coming out of the Oasis Combi Zone Control Board.  With the burner switch turned on I tested each zone by turning its thermostat up until it clicked, causing the burner to ignite, the circulation pump to start, and the fan(s) to come on.  All three zones worked.  Although not as dramatic or emotional as yesterday when got the unit to fill, purge, and ignite, this meant we were done with the Oasis Combi installation (except for some purely cosmetic things that Butch and Fonda may not get to for a while) and that it was fully functional.

Top of the Combi showing summer/winter valve lower right (blue handle).

Top of the Combi showing summer/winter valve lower right (blue handle).

While I was working on the Oasis Combi fan control wires Butch started working on installing a fuel gauge.  The New Jersey Transit MCI MC-9B coaches did not have fuel gauges as they made regular runs of known distances and returned to the same NJT garage every day.  For cross-country RV use, however, a fuel gauge is a very good thing to have.

To install the fuel gauge Butch had to pull the instrument cluster out of the dashboard.  These things are rarely designed/built for easy servicing, and this was no exception, but he got it out.  He had installed the sending unit in the fuel tank a long time ago but never hooked it up.  He managed to run a fishtape up from the driver-side front bay into the area behind the dashboard.  He attached a wire to it and fed the wire in as I pulled the fishtape out.  We then used the fishtape to feed the wire from the driver’s side of the generator bay to the passenger side.  From there the wire had to go through the chassis battery bay to get to the sending unit on the fuel tank.  After drilling a hole in one panel and drilling out two rivets holding an unused fuse holder to another panel we finally had a route for the wire.

There was a blank spot on the instrument cluster where the fuel gauge would have been so that is where Butch installed it.  It took us a while to decode the 24 VDC dashboard wiring diagram but we eventually figured out that there was an unused screw terminal on the load side of the Master Switch just below the fuel gauge that would very conveniently provide the +24 VDC for the gauge.  I made that connection and then Butch connected the instrument, remembering to pass the wires through the dashboard hole first.  In addition to the +24VDC, signal, and ground for the gauge he had to tap into the 24 VDC instrument lighting circuit to power the instrument light and provide a ground connection for that as well.  With everything hooked up Butch turned on the Master Switch and the fuel gauge indicated just below a full tank, which is what he expected.  These kinds of “little” projects sound relatively simply, but they always seem to take a half a day to a full day to do, even with two people working on them.

At this point it was about 2 PM so I took a quick lunch break and had a tofu hotdog with mustard, relish, and onions.  We had hints of snow flurries during the morning that became more persistent after noon.  I was thinking about installing the new Shurflo Everpure ADC water filter cartridge under the kitchen sink and opened the cabinet door to have a look at what was involved.  (Actually, I knew what was involved having done this before.)  This filter cartridge should be the easiest thing in the world to remove and install but that has not been my experience.  The location of the filter head doesn’t make it any easier.  Anyway, I turned on the light and noticed a waded up paper towel in the trash can.  I had not been using this trash can since I realized that the resident mouse had easy access to the area under the sink and regarded the waste basket as a buffet.  I figured I had thrown this used paper towel in there by mistake out of force of habit as I catch myself several times a day starting to do that.  I moved the can and reached in to get the paper towel and that’s when I noticed the dead field mouse in the corner of the trash can.

The mouse was a tiny creature, gray on top and white on the bottom.  I surmised that it had returned to this cabinet looking for the food it had found there on previous occasions, climbed up a carpeted wall or electrical cable, perhaps walked across a drain pipe and, seeing the paper towel moved to the rim of the trash can (the only place I ever actually saw it alive) and either jumped or fell in.  Unfortunately (for the mouse) the trash can did not have a plastic liner bag and so it had no way to escape.  I presume it died of thirst and/or lack of food.  It was not my intention to use the trash can as a trap.  In fact, I had purchased a live trap a few days ago but not yet set it.  My plan was to trap it, unharmed, and release it a couple of miles away near a creek so it had access to water.  Instead, I added it to my real trash bag, tied up the bag, and put it in the dumpster.  Although I was glad to no longer have it roaming around inside the coach, I was saddened to find it dead and to think that it had died this way.  I have no way of knowing, of course, if this was the only mouse in the coach so I will continue to be on the lookout for telltale signs of the presence of mice.

I returned to working on Butch and Fonda’s bus.  While they dressed up some coolant lines and tightened up some fittings on the Oasis I installed four surface mount duplex electrical outlets in the bedroom, two on the back wall above a narrow shelf at the head of the bed, one in the driver side chase at the midpoint, and one at the front end of the chase inside the utility closet.  I turned off the power to the inverter panel, removed the cover, and routed the cable down into the box.  Butch discovered that he did not have any more 20A circuit breakers so I connected the ground and neutral and left the load wire until we had an appropriate breaker.  We were done working in/on their bus for the night, so I left the cover off of the inverter panel and turned the power back on so they would have lights in the front part of the bus

Fused DC distribution house panel in MC-9 bedroom utility closet.

Fused DC distribution house panel in MC-9 bedroom utility closet.

Throughout the day Butch had been adding to a list of things he needed and at this point the list was long enough, or the items critical enough, that we made a run to town.  By this time it had been snowing for a few hours and it was accumulating on grassy areas and making the roads slick.  Unfortunately the Logansport Home Depot closed at 7 PM on Sunday evenings and we got there at 7:05 PM, having stopped first to fuel up the Suburban.  No problem, we just drove down the street to Rural King which was open until 9 PM and has free popcorn.  Bonus!  Butch found most of what he needed there.  My shopping list was short and easily filled at Walmart where Butch picked up a few other things on his list.

When we got back I made a tofu “turkey” sandwich with vegan mayonnaise, sliced onions, and power greens and got out some of the seedless black grapes.  As I was finishing the preparations Fonda came to the bus to let me know that Linda was on the phone.  I brought everything into the house and chatted with her for a little while.  We then sat down and ate dinner.  After dinner I used Butch’s chop saw to cut my oak center pillar mounting board to length and then set it up on a table in the parts room so I could stain it.  Fonda got the stain, a shallow wide mouth can, a disposable foam brush, a rag, and a pair of disposable gloves for me to use.  I was not very happy with the results, but I will see how it looks in the morning.  I suspect I will end up painting it flat black.  I would really like to get it mounted to the center windshield pillar before I wrap up working on my bus this Wednesday but, given the other things I need to do, it’s going to be close. 

 

2014/10/08-15 GLCC and Bus Work

2014/10/08 (W) Rally Ho!

Today was a travel day so I had a light breakfast and went to the Small Town Brew for a cup of coffee rather than create a mess making my own.  I donated $2 for this cup and did not have a refill so the three cups I consumed over the last two days averaged out to $1 each.  I spent most of the morning helping Butch investigate possible routes for the engine preheat plumbing for their new International Thermal Research (ITR) Oasis Combi diesel-fired hydronic heating system.  I also adjusted the front bus tire pressures and all four of the car tire pressures.

As noon approached I switched to departure mode.  I changed out of my work clothes into something cleaner and more comfortable for driving, finished packing all the stuff I had in the guest bedroom, and loaded it into the bus or the car.  I targeted a 1 PM departure.  Butch had to go to town so we said farewell until Friday and he took off.  By the time I started the bus, pulled it across the street, moved the car over, hooked it up for towing, and checked the lights (with Fonda’s help) it was closer to 1:30 PM than 1:00 PM.

The drive to Elkhart was pleasant and uneventful.  The speedometer sat on zero for the first quarter of the trip, bounced around for the second quarter, indicated 85 MPH (max speed) for the third quarter, and settled in to something like the correct speed for the final quarter.  This is the way it had behaved for quite some time before it got unplugged so this confirmed that it did not work correctly and needed to be replaced.

I took SR-16 east to US-31 north to US-20 east to CR-17 north.  CR-17 becomes MI-217, the Michiana Parkway, which ends at US-12.  I took that west to Old M-204 west and followed it past Phoenix Paint back into Indiana where it becomes SR-19 south.  I turned east on CR-4 and a mile later turned into the entrance to Elkhart Campground on the south side of the road.  This route is at least 15 miles longer than necessary.  There is an exit for SR-19 north off of US-20, which is a much more direct route, but requires driving through the heart of Elkhart.  There was major road construction on this stretch of SR-19 the last couple of years, including a bridge, with narrow lanes and weight restrictions.  That work is all completed, and the road is much better now, but it is still a more urban route with stop lights, turns, and traffic.

Our coach (front, right) at the FMCA GLCC Surplus & Salvage Rally, Elkhart CG (Elkhart, IN).

Our coach (front, right) at the FMCA GLCC Surplus & Salvage Rally, Elkhart CG (Elkhart, IN).

I checked in to the campground and then got parked in my assigned site.  I was one of the last coaches to arrive.  I went through my arrival routine and got the coach setup to use before visiting with fellow GLCC chapter members, some of whom I had never met.  I chatted briefly with Michele Henry from Phoenix Paint to confirm her availability to work on a BCM article later in the evening and then went to Martins supermarket to get a salad for dinner.  The Martin’s supermarket on SR-19 at CR-4 has a really nice salad bar and I made a big salad with lots of ingredients, all vegan of course.

I took my salad over to the meeting room at 6 PM and had dinner with the group.  I was expecting Michele at 6:30 PM so I excused myself and went back to my coach.  She showed up a little after 7 PM.  We worked until almost 10 PM and managed to go through the entire article.  I did not have the photos on my new computer so the selection, processing, and captioning of images will occur later.

2014/10/09 (R) GLCC Surplus and Salvage

I went over for coffee around 8 AM without eating breakfast first.  By 9 AM plans had been made for car pools to visit the various RV surplus and salvage businesses in the area.  I went back to the coach and had a grapefruit for breakfast and then spent the morning taking care of e-mail and uploading blog posts starting with September 19th.

By noon I was tired of staring at my computer so I turned my attention to the speedometer.  After removing the dashboard cover I figured out a socket and ratchet combination that allowed me to remove the two Nylok nuts from the back of the instrument.  With the retaining bracket removed the old instrument slipped out the front of the dashboard.

Rear view of new VDO speedometer with custom adaptor cables.

Rear view of new VDO speedometer with custom adaptor cables.

I needed to redo the wiring so I got out my electrical tools.  I also tested to voltage to verify that the lighting circuit was 24VDC.  It was, and the actual instrument runs on either 12 or 24, so it didn’t care.  The existing connectors for the old instrument appeared to be the same 4-pin flat connectors used in personal computers for providing power to hard disk drives, CD drives, and other peripheral components.  I checked online and found that Michiana PC was located behind Menard’s a short distance away on the other side of the toll road.  I got an adapter cable with the proper connectors on it and then stopped at Menard’s for two different spade connectors.  As long as I was out driving around I stopped at Phoenix Paint to pick up coupons for Marco’s Pizza.  Since I had to drive past Martin’s on the way back to the campground I stopped and bought groceries.

The new VDO speedmeter temporarily connected.

The new VDO speedmeter temporarily connected.

Back at the coach I put the groceries away and got back to work on the speedometer project.  I cut leads from the old instrument light wiring as I needed the plug.  I then cut the unneeded end off the computer power cable.  I wired the lighting connector, spade connectors, and jumpers.  I then wired the instrument connector spade lugs to the computer power cable.  When all the wiring preparation was done I attached all of the wires except the two for the signal (#16 & #20) and connected the cables to mating chassis connectors.  I temporarily set the speedometer in dashboard hole, turn the chassis batteries on, and then turned the light switch on for the dashboard lights.  The speedometer lights worked, so I turned the ignition to ‘ON’ without starting the engine.  The gauge needle swept up to max and back to zero and the odo displayed 0.0.

I turned the ignition off and disconnected the chassis batteries.  I then pulled the instrument out of the dashboard and disconnected the two cables.  I got the H3-40 Service Manual out and figured out which wire was the + signal (#16) and which one was the ground (#20).  With the cables protruding through the mounting hole from the rear I pushed the spade terminals fully on and reconnected the cables.  It was getting to be late afternoon by this point and I decided to leave the finally assembly for tomorrow.

The new VDO speedometer (above & right of center).

The new VDO speedometer (above & right of center).

I took a shower and shaved and had plenty of hot water as the Aqua-Hot continued to cycle automatically.  I prepared an Annie’s Kung Pao noodle bowl for dinner and took it over to the meeting room at 6 PM.  I stayed there until 8 PM enjoying bus chat with a small group of chapter members that I know well.

The new VDO speedometer installed in the old hole.

The new VDO speedometer installed in the old hole.

Several members developed problems with their BCM subscriptions over the summer.  Pat Lintner gave me a flash drive so I could provide him with the issues he did not receive.  I took care of that back at the coach and then continued to upload blog posts and respond to e-mails.  I was two days behind on writing blog posts and stayed up until I was caught up which made for a very late night.

2014/10/10 (F) Bus Business

I was up way too late last night catching up on writing drafts of blog posts for the last few days.  Linda sent a text message this morning at 6 AM that I read at 7:30 AM letting me know that she was starting the drive to Elkhart.  I went over to the meeting room at 8 AM to have coffee and Linda showed up at 9 AM.  We visited with the other rally attendees until 10 AM and then went back to our coach to have granola for breakfast.

L-to-R:  GLCC secretary Tami Bruner, Newsletter editor Scott Bruner, and Treasurer Linda Fay.

L-to-R: GLCC secretary Tami Bruner, Newsletter editor Scott Bruner, and Treasurer Linda Fay.

At 10:30 AM we drove to Phoenix Paint to deliver some additional copies of Bus Conversion Magazine to Michele and visited with her and Roxanne for a while.  Josh was supposed to come look at our coach in the afternoon but had to make an unexpected trip to Chicago.  Michele called him and got him rescheduled for tomorrow morning between 9 AM and noon.

Before returning to the campground we stopped at Martin’s supermarket for salad toppings and Radio Shack for a miniature “grain of wheat” light bulb.  Radio Shack did not appear to have the bulb I was looking for, but I learned later in the day from Butch that the bulb I need comes with two bare wire leads that fold over to form the contacts.

GLCC members gathered for the Friday evening dinner and business meeting.

GLCC members gathered for the Friday evening dinner and business meeting.

When we got back to the coach we were going to have lunch but I got busy giving a tour of our bus tour and then touring the late 1990’s MCI 102D Vantare conversion parked next to us.  Butch and Fonda arrived (in their car) while all of that was going on.  We visited for a while and then they took off for Bontrager’s RV Surplus store.

Many of the GLCC members were away shopping for surplus bargains so we hung around our coach where I worked at my computer and Linda read until she got tired and laid down briefly.  I was thinking about lying down too when Pat Lintner stopped by and then Butch/Fonda returned.  Before we knew what had happened to the afternoon it was getting to be dinner time.  Linda made our dinner salads and we went over to the meeting room a little before 6 PM where we enjoyed our salads in the company of our friends.  President Larry Baker conducted a brief business meeting at the conclusion of which Linda was elected to another 2-year term as chapter Treasurer and I was elected to a 2-year term as chapter President.  Dean Chipman was elected chapter Vice-President and Tami Bruner was elected chapter Secretary.  Pat Lintner stayed on as National Director and Frank Griswold as Alternate National Director.

L-to-R: GLCC National Director Pat Lintner talks to newly elected President Bruce Fay and members Charles Martin and Ed Roelle.

L-to-R: GLCC National Director Pat Lintner talks to newly elected President Bruce Fay and members Charles Martin and Ed Roelle.

Butch and Fonda had to get back to their home to tend to their dogs and left shortly after the voting was concluded.  We visited for quite a while with the chapter members before returning to our coach for the evening where we had a glass of wine and went to bed.

2014/10/11 (S) Transfers

The day dawned clear and cold with the morning low temperature in Elkhart at 32 degrees F and frost on the ground and vehicles.  We went over for coffee at 8 AM and chatted with fellow chapter members while they had breakfast.  Josh was supposed to come look at our coach between 9AM and noon but called to see if late afternoon would be OK.  It was fine with me and he agreed to call before he came over.

We returned to our coach and had granola for breakfast.  We spent the morning chatting with folks, including the Thornton’s, who stopped by to pay their dues.  We had transferred some things to Linda’s car yesterday and transferred some more things this morning.  By noon Linda was packed and ready to leave for home.  She texted me later to let me know she had stopped in Ann Arbor to visit family and shop at Whole Foods Market before getting back to our house.

Ed Roelle and Marty Caverly came to our coach to listen to our Aqua-Hot.  Ed agreed that it should not be producing any visible exhaust after initial startup and thought a likely cause was worn bearings in the blower shaft causing reduced rpm which resulted in reduced air flow which resulted in a rich fuel/air mixture.  Ed and Marty both thought the unit sounded normal for a unit with worn bearings.

After looking at the Aqua-Hot I found former chapter President Larry Baker at his coach and we transferred quite a lot of “presidential stuff” to my car.  He had been collecting and transporting this “stuff” for the last six years and was all too eager to be rid of it.

Josh called at 3:45 PM to let me know he would be at my coach around 4:45 PM.  I made a quick run to Radio Shack to check again for the “grain of wheat” 12 VDC bulb, but they did not have it in stock.  Josh arrived a little before 5 PM and we discussed our desired interior renovation for over an hour during which time he also took measurements.  By the time we wrapped up our discussion most of the rally attendees had left for dinner at a local restaurant.  I called Linda and then had dinner in the coach; a simple green salad, a roll with garlic vegan butter spread, and grapes.

I decided to top off our fresh water tank while there was still some daylight rather than doing it in the morning when it was forecast to be cold.  After the tank was full I shut off the water, disconnected and drained the hoses, and stowed them in our fresh water tub.  I removed and stowed the pressure regulator and water softener.  I then turned each of the three Aqua-Hot loops on, one at a time, to see if I could figure out which circuit included the heat exchangers in the water bay and front storage bay.  As best I could determine, the bays are plumbed into the bedroom circuit.  I would have preferred to have them plumbed in with the bathroom as we like the bedroom cool for sleeping but want to be able to keep the bays warm enough to avoid freezing.

Scott Bruner and his dad, Richard, were out so I chatted with them about the Aqua-Hot.  The Marin’s had a propane camp fire going at their rig next to ours so we went over there to talk for a while.  I finally got cold and went in for the night around 9:45 PM.  I uploaded the blog posts for the last three days of September and then went to bed and worked on this one.

2014/10/12 (N) Arduino SBC

I got up around 7 AM, got dressed, and spent an hour packing clothes, computers, and other things that would eventually be transferred to the car for the trip home.  I went to the meeting room at 8 AM to have one cup of coffee and socialize with the GLCC chapter members who had come over for breakfast.  There are special names for breakfast on the last morning of a rally.  The one I like best is “hitch up breakfast.”  Whether you have a motorhome towing a car or a car/truck pulling a trailer, most RVers have something that has to be hitched up for towing before they can depart.  It is also a distant but quaint reference to hitching up a team of horses to a wagon; the original RV having one to six horsepower.

I do not normally have coffee or breakfast on days when I have to drive the bus, but the bus driving portion of my day was only going to be two hours and I would not be pulling out until sometime between 10 and 11 AM.  Those who wanted to eat breakfast were done by 9 AM and a crew of women busied themselves cleaning the kitchen and re-packing the supplies.  Some of those supplies were destined for my car which was already connected to the back of our bus, so everything got loaded into Pat and Vicky Lintner’s car and they brought it over to my site and I transferred it to my vehicle.

I dumped the waste water holding tanks and stowed the drain hose.  By 9:45 AM I was packed and had the bus and car ready to travel except for a few last minute details.  I joined a small group of guys for some final conversation as several coaches pulled out.  I was in a site directly behind Scott and Tami Bruner and although I could have left before them it was going to be a lot easier to wait until they pulled out, which they did shortly after 10 AM.

I went through the final steps of preparing the car to be towed, turned the coach chassis batteries on, turned the shore power off, disconnected the shore power line, and stowed it.  I had opened all the air valves earlier, so I secured all of the bay’s, locked the entrance door (from the inside), and started the engine.  While it was building air pressure for the suspension and brakes I called Linda at 10:29 AM to let her know I would be underway shortly and then called Butch.  I did not get an answer at Butch and Fonda’s house so I called Butch on his cell phone.  He had misunderstood my travel timing and indicated that they might not be home yet when I arrived at their place.

I pulled out of my site at 10:30 AM and reversed the route I had taken on Wednesday, going east on CR-4 (IN) to SR-16 (IN) north, to Old M-204 (MI) eastbound to US-12 (MI) east to M-217 (MI) south (the Michiana Parkway), which became CR-17 (IN) southbound.  I left CR-17 and got on westbound US-20 over to US-31 south which I stayed on all the way to SR-16 west towards Twelve Mile.  I had a call from Pat Lintner while I was driving regarding the dates for the 2015 Surplus and Salvage rally which will be in mid-September.

I arrived in Twelve Mile at 12:15 PM.  I got the car detached and moved it out of the way.  While I was doing that Fonda got home from church.  After tending to their two dogs (Rascal and Daffy) she helped me back the bus across the street into its parking spot next to their bus.  I plugged in the shore power cord to get AC power to the house systems but left the bus systems on temporarily so I could reprogram the new VDO speedometer.

On the drive from Elkhart the speedometer, which had not been calibrated, was indicating just under 8 MPH when I was traveling 60 MPH according to my GPS.  That meant the signal from the Allison ATEC transmission computer was putting out fewer pulses per mile than the default speedometer program.  For some reason I thought the default might be 200,000 PPM so I computed the ratio between actual and indicated speed and divided  200,000 by that number which gave me 26,316.  I programmed that in using the PULSE mode but would not be able to test it until later in the week.  If the indicated speed is in the ballpark I will use the ADJUST mode to manually move the pointer to indicate the same speed as the GPS.  There is also a CALIBRATE mode that counts the pulses over a one mile distance and then programs that into the instrument.  That is the most accurate way to calibrate the speedometer/odometer if you have someplace safe to do it with accurate mile markers.

With that done, I turned off the chassis batteries and the unneeded air circuits in the front bay but left the valve for the engine air accessories turned on.  I typically do this when I leave it with someone in case they have to start it.  I turned the Aqua-Hot electric heating element on and turned on the bedroom thermostat but set the temperature to a cooler setting.  The heat exchangers in the water bay and front storage bay appear to be tied-in with the bedroom heat exchanger.

I transferred stuff from the coach to car the car and by 1:25 PM I was ready to roll, but Butch called and said he was almost back to the house so I waited for him.  He had made progress on the Wiremold in the bus kitchen and wanted me to see it.  He had also bought a 125 A main lug electrical panel so we discussed the mounting and installation, part of which I will probably work on later this week.  He had also received the ITR Oasis Combi unit, so I had to see that too.  Fonda built a 3-D cardboard mockup and Butch had it sitting in the water bay where he plans to install the Combi.  We will probably do more work on their bus than on ours over the next two weeks, but that’s OK; their bus has more/critical projects at this point than ours and he has helped me a lot with our projects.

I pulled out at 2:05 PM and decided to take a slightly different route home:  SR-16 east, US-31 north, US-6 east, I-69 north, M-60 east, I-94 east, M-14 east, US-23 north, M-36 (Nine Mile Road) east, Pontiac Trail north, to Dorothy Street and the SLAARC monthly meeting at the South Lyon Witch’s Hat Depot.  I do not usually take US-6 across Indiana although it is a fine road known as the Grand Army of the Republic Highway.  It is flatter than US-20 with more towns and associated lower speed limits and stop lights, but it was a nice drive with different scenery.

I arrived at the SLAARC meeting at 7 PM.  The business meeting was already concluded and Mike (W8XH) was setting up for his program on the Arduino SBC (single board computer).  He bought the experimenters kit and had been playing with it enough to discuss it with the group.  Larry (K8UT) discussed the four projects he has built using the Raspberry Pi platform and passed around some of the hardware.

It was 9 PM by the time I finally got to our house.  Linda helped me completely unload the car as I had an 8:30 AM service appointment at Brighton Honda and she was leaving before 6 AM for the bakery.  She had fixed some strawberries for me and they made a nice treat after a long day of snacking on vegan junk food while driving.  I worked for a while on this post before turning in for the night.

2014/10/13 (M) Grain Of Wheat

Linda was up early and out the door at 5:45 AM.  I got up a little after 7 AM, started a load of laundry, had a couple of homemade muffins, and got ready to take my car to Brighton Honda for its 90,000 mile service.  I got coffee at the Dunkin Donuts across the street from the dealership first and waited in the lounge working on yesterday’s blog post while they worked on my car.

I forgot to specify synthetic oil so the put in regular oil.  When the car was done I headed to Novi and immediately noticed a front-end shimmy that was not there when I dropped it off.  They had rotated the tires and may not have re-torqued the lug nuts correctly.  It also pulled to left, which might be a tire inflation issue.  I did not have time to take it back so I will see if it settles out on the drive to Indiana tomorrow.  If not, I will need to get at least the front tires/wheels loosened and retightened, and perhaps balanced.  Worst case I will have to get the front end aligned.

I found the FedEx/Kinko’s on Grand River Avenue just east of Novi Road and made 10 copies each of two 24″x36″ electrical diagrams; one for the DDEC I ECM (Engine Control Module) and one for the Allison 700 Series ATEC (Automatic Transmission Electronic Control).  I folded up an ATEC diagram for me and one for Chuck and rolled up the other eight and put them in a tube for safe keeping.  Chuck and I have DDEC II’s controlling our main engines so I rolled the 10 DDEC I diagrams up and put them in a second tube to protect them.  By the time I was done it was 10:45 AM and Chuck was at his shop just up the street so I drove there.

He had installed a dual battery maintainer and wanted me to see it.  He mounted it on the back wall of the small bay above the passenger side drive tire of their bus which got it close enough to the chassis batteries (in a tray above the tag tire) for the built-in charging cables to reach the correct battery terminals.  He was still pondering where to tie in the AC power source so we discussed some alternatives.  He had also put the red covers on the bulbs in his new VDO speedometer so I got to see that.  Ours are white for now but most of the dash lighting is green.  The red makes the speedo stand out, but if I change ours from white it will likely be to green.  Chuck had a supply of spare 12VDC, 1.2W “grain of wheat” light bulbs that are used in our illuminated switches and let me have four.  Our Aqua-Hot switch does not currently light up when it is turned on.

After checking out his projects we went to the Panera at Grand River Avenue and Novi Road for lunch.  We had a good chat and solved all of the world’s problems so he went back to the shop to find some new ones and I went home to take care of chores.  I continued doing laundry and worked on the SLAARC WordPress website setting up user accounts for several new club members.

Linda got home around 5:30 PM and got busy making dinner.  She started with a nice salad featuring a ginger dressing.  Dinner was 45 minutes later; a baked potato with Brussels sprouts on the side, a glass of Leelanau Cellars Winter White with Peach wine, and grapes for dessert.  She worked on something for Butch while the potatoes baked and I worked on e-mail.

We were both tired after dinner but took some time to sort and fold the laundry from which I selected and packed the clothes I will need for the next 10 days.  We were tired and turned in after that.  I had received an e-mail from Butch with seven photos attached of the place we are considering staying in Quartzite, AZ.  It took us a while, but we eventually matched them up with the correct lot on the Google Maps satellite view.  It is not the corner lot as Butch and I previously thought, but the 3rd lot north of Kenoyer on the east side of N Lollipop Lane.  With that issue resolved we turned out the lights and went to sleep.

2014/10/14 (T) A Crowning Achievement

Linda was up at 5:15 AM again and out the door on the way to the bakery at 5:45 AM.  At this hour of the morning she has clear sailing all the way to Hamtramck which is much less stressful than the parking lot that develops on I-96 inbound just a short time later.  I was up at 7:15 AM, showered, and started gathering and organizing all of the stuff that I had to load into the car for the trip back to Indiana.

Keith showed up at 9 AM to cut the grass as I was loading my car.  He was rained out yesterday and today was not looking too good either but he figured he would have a go at it.  I wrote out his check and paid him in advance as I would be gone long before he finished.  I had time for a cup of green tea and pulled out of my driveway at 9:30 AM.

My first destination was Gusfa Dental in Dearborn, Michigan where I had an 11 AM appointment.  Dr. Steve and his assistant, Margaret, installed my new permanent ceramic crown on the upper right tooth that had a root canal procedure in mid-September.  The crown fit almost perfectly and only required a little modification on the surfaces that abut the two teeth immediately adjacent.  The bite was just right.  Gusfa Dental is definitely not the cheapest clinic around, but the work is top notch and they have been our dentists for almost 40 years.

I was done and out the door at 11:20 AM and headed directly for Twelve Mile, Indiana.  The drive was wet but uneventful.  Given my starting point in Dearborn I changed my route yet again, this time taking I-94 west to M-60 southwest to I-69 south to the I-80/90 Indiana Toll Road west to exit 92 at SR-19 (IN) in Elkhart.  From there I headed south on SR-19 and wound my way slowly through Elkhart until I picked up US-20 westbound on the south side of Elkhart.  From US-20 I picked up US-31 south and exited at IN-25 south of Rochester, Indiana where I bought some groceries at the Kroger store.  I texted Linda and then called Butch.  As I was getting ready to head south on IN-25 I got a call from Michele Henry of Phoenix Paint with some questions about the Zip Dee awnings we had installed on our coach after she finished painting it.  I took IN-25 as far south as Fulton and turned east onto a small farm road that took me to Meridian then south to SR-16 and east to Twelve Mile.

While driving down Meridian I saw one of the most intense and perfect rainbows I have ever experienced.  It was deeply colored, very clear, and an entire semicircle was visible.  A second rainbow, fainter and partial, formed above the first one on the right (south) end.  The sky was very dark to the east with bright, low sun from the west.  The trees were blazing with color, intensified by the rains, and white farm houses glistened as if they had just been freshly painted.  It was spectacular but I was not able to get a photo of it.  I arrived in Twelve Mile at 5 PM and immediately unloaded and stored my groceries.  I then brought my clothes and technology items into the house and put them in the guest bedroom where I stay when I am here.

Butch needed some parts for various bus projects so I drove us to Home Depot in Logansport.  One the drive in he got a call from his brother Tom.  He had a problem with his air compressor and wanted Butch to look at it so we went there after our stop at Home Depot, with a stop at the local Mobil station so I could fill the fuel tank in my car.  Butch quickly made a tentative diagnosis of the compressor problem as the starting capacitor and/or switch.  Tom and Butch did some pondering about details of Tom’s project in which he is converting the front half of a Crosley sedan into a trailer.

We visited for a while back at the house and looked up the grain of wheat bulb I needed for the illuminated switches in the H3-40.  Napa Auto Parts shows it in their automotive lighting catalog as a #37, 12 VDC, 1.26 W, wedge based.  Butch looked online and found a place (Bulbtown) that sells them for $0.42 each.  Orders over $50 get free shipping and handling so we discussed doing a bulb inventory of each bus and then pooling our orders.

I spent a few minutes showing Butch how the photos that Joe sent of the lot in Quartzite matched up with the Google Maps/Earth satellite and Streetview images.  By the time we were done with that it was late and we all turned in for the night.

2014/10/15 (W) MC-9 AC Wiring

Cockpit house systems switch panel.

Cockpit house systems switch panel.

Butch bought a brass nipple (NPT) last night to thread into the fitting on his fresh water tank but the fit was still too loose.  He needed the nipple in order to put the fresh water tank back in the bus.  Between that and the really soupy 54 degree F weather it was obvious that today was not going to be an outside work day.  I suggested that we work on the AC wiring on their bus instead—a nice inside project—after breakfast.

House electrical closet in Butch & Fonda's MC-9 before rewiring.

House electrical closet in Butch & Fonda’s MC-9 before rewiring.

I had homemade granola with fresh blueberries and soy milk, a glass of orange juice, and two cups of Seattle Blend 1/2 decaf coffee.  While the coffee was brewing I unscrewed the switch panel with the Aqua-Hot switch and replaced the “grain of wheat” bulbs in the Aqua-Hot switch and the Engine Preheat switch.  We then got to work on the AC (house) wiring for their bus conversion.

New 20-slot AC panel for inverter circuits.

New 20-slot AC panel for inverter circuits.

The bus had three small main lug load centers, with six circuit breakers each, mounted in a future closet in the bedroom.  We ran an extension cord through the passenger side rear slider window to power a work light, disconnected the shoreline, and switched off the inverter.  I then removed the three panels one at a time, labeling each cable as I pulled it out.  With all of the old panels out we mounted the new 20-position panel box for use with the inverter circuit.  I spent the rest of the work day, except for a lunch break, pulling old and new electrical cable into the new box and making the connections to the ground bar, neutral bus, and the GFCI circuit breakers for all of the circuits that will be fed by the inverter.  We tied in the main AC power to the inverter AC input and checked that all of the circuits worked as planned, which they did.  I will mount two of the smaller boxes tomorrow and pull the cables for the shorepower/generator only circuits into those boxes.

We quit working for the day at 7:30 PM and I washed up before making my dinner.  I had a nice salad with “power greens” and various toppings and leftover Koshary.  Yum.  I drew a glass of Moscato, did the dishes, and went back to the house.  I had a text and an e-mail from Linda so I replied to those.  We were all tired and turned in a little after 9 PM.

 

2014/09/12 (F) Posted

Linda was up very early to try and beat the morning rush inbound to Detroit from the northwest.  I took an Ibuprofen and went back to bed, finally getting up at 7 AM.  1-800-PACK-RAT was scheduled to pick up the 16 foot long storage container we have had in our driveway for the last two months and I wanted to be up and dressed when they arrived.  I did not have any problems with my teeth overnight.  They felt OK this morning but the upper right was still a bit sensitive to biting pressure.  I had a nice soft banana for breakfast and decided to keep taking the Ibuprofen and Tylenol.

I put a load of laundry in the washer and then ran out to take care of errands.  I stopped at Dunkin Donuts for coffee, Lowe’s for solar salt for the water softener, and then Teeko’s for coffee beans.  Jeff still did not have the Sweet Dreams decaf blend even though he orders it every week.  I got a pound of the Seattle Blend 50/50 regular/decaffeinated, and a pound of regular Brazilian Serra Negra to blend with the decaffeinated beans we already had at home.

Heather, from Root Canal Specialty Associates, called around 9 AM to check on me.  I mentioned the sensitivity and she said that was normal and to keep taking the Ibuprofen/Tylenol through the weekend to counteract any inflammation and/or discomfort.  She wanted to know if I thought the temporary filing was high and making contact before the other teeth.  I wasn’t sure, but she said if it was to call them Monday morning and they would get me in to adjust my bite.

Since I was on the phone anyway I called Bratcher Electric to see about the quote/estimate for the generator service / fuel changeover and the service entrance feed from the transfer switch to the sub-panel to change it into a main panel.  They have been very busy with repairing damage caused by the storms of the last few weeks.  We did not suffer any damage beyond some dead branches breaking off from trees, but south of us folks were hit much harder.  That kind of work always takes priority.

The day was overcast and dreary with morning temps in the mid-40’s and a high of 54, but that was OK; it was a perfect day for sitting at a desk and working on a computer, undistracted by either bad or gorgeous weather.  I did, however, bring my computer upstairs and work at Linda’s desk.  My office is very nice but it is in the basement and it is a bit of a cave.  Sometimes I like that, and sometimes I don’t.  I worked on our blog until early-midafternoon and finally uploaded posts from Aug 2 through Aug 20.

My only interruption was a visit from one of Roese Construction’s field supervisors who was checking on where the runs will go to connect the houses in our neighborhood to the natural gas main.  After looking at our situation he agreed with me and Mel who had looked at this a few weeks ago, that staying to the east of the east entrance to our pull-through driveway made the most sense even through it required them to bore at an angle relative to the main line.  That conversation confirmed that they will be horizontal boring the branch line rather than trenching it in.  He did not give me a firm date, but it sounded like it could be as early as tomorrow (Saturday) and likely by Tuesday next week.

My computer battery was down to under 1 hour of charge remaining, so I took it downstairs and plugged it back in to its power supply.  While I was down there I put another load of laundry in the washing machine.  Back upstairs I made a PB&J sandwich for lunch, along with some green tea.  I got back on the RVillage Mobile development site, played with a few more features, and provided some additional feedback to the development team.  I then worked on this post using my new Logitech Bluetooth keyboard.  The Wacom Bamboo stylus is nice, but the keyboard is the way to go when creating extended text.

Juniper, our female cat, was getting into something in the library so I went to investigate.  She had cornered a yellow jacket and was trying to figure out what to do with it.  I solved the problem for her by capturing it and putting it outside.  I don’t think she was pleased with my solution, but not 20 minutes later she was at it again, and it was another yellow jacket.  We have a nest in the soffit near the library that we need to get rid of, but we have not had a problem with them getting into the house until very recently.  Hopefully that has not changed but I will have to investigate the situation.  It may be that with the onset of cooler temperatures they are finding their way into the library through the recessed ceiling downlight cans.  If so, there’s really no good way to seal those.  Fortunately we can close of the house from the library with a kitchen door and a living room doorwall that includes a screen door.

It started raining very lightly around 4 PM, but never developed into anything.  Linda got home from the bakery at 5:30 PM.  The storage container had not been picked up yet so we called the 1-800 number and left a message with our callback number.  I got a call around 6 PM from the local (Plymouth, MI) office verifying the pickup and address.  The driver arrived around 7:20 PM and had the unit loaded by 7:30 PM.  After he left we headed to dinner at LaMarsa where we had crushed lentil soup and split an order of Koshary and salad.  Even splitting the dish we both ate too much, aided by the fresh-baked pocket bread and garlic spread.   The food and service were both excellent, as always, and the garlic spread was “…the gift that keeps on giving.”

We got back from dinner a little before 9 PM, too late to start any in-depth computer work, but early enough for me to finish this post and for Linda to do some recipe research for Sunday’s brunch.  It seems like only yesterday it was still light at 10 PM at night, but we are approaching the autumnal equinox, and there are noticeably fewer hours of daylight now.

 

2014/08/20 (W) Like A Well-Oiled Clock

Darryll and Alec (DCM Heating & Cooling) were back today to continue working on the garage and library HVAC project.  I was talking to them as they unloaded tools and materials when I got a call back from Paul Keech.

Paul has changed the name of his company from Paul’s Tree Service to Detroit Tree Recycling and is also running American Mulch.  As I was told yesterday he is trying to focus on tree removal, especially wood lots with multiple trees, rather than tree trimming.  Among other reasons, the trees he removes provides the raw material for his mulch business.  Also, the guy who did most of his climbing the last ten years has moved on to another job and it’s hard for Paul to run a business when he’s up in a tree, even with a cell phone.  I tried to describe the trimming and removal work we need done but in the end we agreed that I would take some photos, put them in a Dropbox folder, and e-mail him the link.  He also encouraged me to get a couple of quotes from some companies more local to our new location.

While I was talking to Paul, Darryll found a small leak in the reducer at the T-fitting behind the garage and tightened it.  The pipe out of this reducer will bring gas into the garage and was the last piece of pipe they worked on the last time they were here.  Alec reset the pressure to 12 PSI and it appears to be holding better than it has up to this point.

In the course of the day, they…

  • …finished setting the Library furnace/air-conditioner and connected the parts together.
  • …cut the hole for the return air register and installed the return air duct.
  • …ran the supply air ducting from the top of the unit along top of the ceiling, over the top of the utility closet door, and then angled it to run along east wall at the ceiling.  All of the duct outside the closet is insulated.  Two flexible ducts will come off the top and run through the attic to supply air through ceiling registers on the east end of the library.
  • …marked the location for the two registers that will be at the bottom of two rigid ducts running down the east garage wall to supply air to the library just above the baseboard heat radiators.
  • …removed the old library window A-C unit and covered the hole with cardboard.  We will have to patch the opening on both sides with drywall and paint it.
  • …shut off the propane to the old library wall-hung space heater, removed the unit, capped the line (iron pipe), turned the gas back on and checked for leaks.
  • …connected the double-walled flue pipe for the library furnace.
  • …connected the double-walled flue pipe for the garage furnace.
  • …ran the 1/2″ iron pipe for the gas supply to the garage furnace.

They will take care of the air-conditioner condenser/compressor installation on a subsequent visit.  In the meantime I need to install electrical junction boxes for the two furnaces, which must have switches located within three feet of each unit.  I also need to run new 12 AWG 2+g NM cable for old A-C condenser/compressor and repurpose the existing A-C condenser/compressor wiring as an outside 120 VAC / 15 Amp outlet.

We still needed to repair drywall in the library and upper east garage wall and install new drywall on the lower east wall of the garage and on the new utility closet walls.  The lower half of the east garage wall is the next thing I have to do as I need to have it done before he comes back to finish the duct work.

I got a call from Chuck Spera just before noon letting me know that he was headed to his shop to pick up his old VDO bus tachometer and take it to Bob’s Speedometer Service on Bergin Road.  Bergin is an east-west road about one mile north of our house.  Bob’s was over at Old US-23, less than five minutes away.  I met Chuck there at 12:30 PM and we met with Matt who handles their VDO instrument repairs.  He tested Chuck’s tach and pronounced it broken but probably repairable, so Chuck decided to leave it there.

Matt did confirm for us that both the tachometer and the speedometer take a square wave input signal in the 3 – 5 volt range with deflection of the needle proportional to the frequency of the waveform.  Presumably this same signal regulates the speed of a motor that drives the gears of the odometer.  I had discussed this very situation with Mike (W8XH) just last night and he is willing to bring his 100MHz 2-channel storage oscilloscope and help us look for and trace these signals if needed.  Once we have known good gauges installed knowing what waveform to look for will help greatly with troubleshooting should they still fail to indicate the appropriate information.

After we were done at Bob’s I headed over to the Meijer’s northeast of M-59 and US-23 to get a few things for Linda.  By the time I got home, Glen Williams of Tenor Clocks LLC had arrived to service our grandfather clock.  I “broke” it about a month ago by trying to wind it at just the wrong time and it has not chimed since then.  It has also never been oiled in the 11 years since we bought it and Glen told us on Saturday that it should be cleaned and oiled every 5 – 7 years.  (We saw Glen at the GLCC/CCO rally in Clio, Michigan this past Saturday when we were there.)  Glen took the mechanism out and examined it and said that nothing was broken.  Apparently it finally bound up the last time I wound it from lack of proper oiling.  He cleaned it, oiled it, and checked it for wear but did not see any.  He reassembled it, checked the operation and timing, and said it was running smoothly and keeping very accurate time “…like a well-oiled clock.”

Although my time on the computer today was limited, I managed to post my blog entry for August 1st and started selecting photos for other posts.  I updated the Technical page on the SLAARC website with a document on low band antennas for Field Day use, and added a link to an online Smith Chart Tutorial.  I then updated the online roster.  I am at the point where I need to generate WordPress user accounts for the club members so I looked more carefully at the WP-Members plug-in documentation to see if there was a way to have the website e-mail each member as I create their account.  It appears that there is, but it will take a little more work on my part to get that set up and working correctly.  As I was working on this our AT&T DSL line started dropping out; again.

Linda spent part of the day preparing food ahead in advance of having company tomorrow.  She held back some of the crushed red lentil soup for our dinner and served it alongside sandwiches.  While we were eating we noticed that the phone said “Line In Use.”  We knew we were not using it, but I picked up one of the handsets, pushed “Talk”, and got a very loud, very noisy busy signal.  We checked all of the phones to make sure there wasn’t a problem with one of them.  There wasn’t.  When I checked again the message said “Check Tel Line.”  That usually means we won’t have a dial tone when we push “Talk” and that was, indeed, the case.

Ken is the service technician that has been out twice to try to resolve the problem and he left his AT&T cell phone number in case we had recurring problems.  He also left his manager’s name and phone number.  I called and left a message for Ken and then called and left a message for his manager, making it very clear that Ken has been working hard to resolve our problem and we are happy with the service he is providing.  I also tried to convey that the service disruptions are interfering with our ability to do things online, like edit websites.  It’s bad enough that the data rate is so slow, but we depend on our “always on” DSL service to always be on.

We went to Lowe’s after dinner to buy a couple sheets of drywall.  We looked for special cover plates with a switch opening in one half and a round hole in the other, but did not find anything like that.  We stopped at Teeko’s on the way back and had Jeff roast two more pounds of half-caff blends for us; one Ethiopian Yirgacheffe and the other Seattle Blend.  He was still out of the Sweet Dreams decaf blend, which we have him mix 50-50 with the regular Seattle Blend to make Sweet Seattle Dreams, but he is supposed to be getting some in his shipment tomorrow.

Back home we unloaded the drywall, had some fresh strawberries for dessert, and read quietly for a while.  I’ve been reading the PDF version of the 2nd edition of The Mobile Internet Handbook and am done except for the glossary and the appendices.  It is over twice as many pages as the 1st edition and is the definitive resource on connectivity for RVers in particular.